Database Users

[HELP PLEASE] T-Mobile MYTOUCH with VODAFONE HTC Rom - AM I ROOTED?!?!?

Ok - thanks for coming in and reading my post even though you could have skipped right on through.
I have purchased a used MT3G from craigslist (i know). I am a semi-knowledgeable "veteran" when it comes to rooting and flashing on the g1 - but the mytouch is totally new to me.
I have some SERIOUS SERIOUS concerns as to what my phone even is in the first place. I bought it with original TMobile packaging, phone says tmobile in the front and back - yet when I turn it on it's VODAFONE.
When I boot into recovery, I get the Triangle Exclamation with the phone. The rom is a 1.5 HTC rom and here is my fastboot info.
PVT 32B SHIP S-ON H
HBOOT - 1.33.0009 (SAPP30000)
CPLD - 10
RADIO - 3.22.20.17
May 8th 2009
HOWEVER - when I run the "one click root" - it says I have a 32A system. Eventually I followed the instructions for 1 click root using flash rec and flashed (downloaded) the Cyan 1.4.1a from the "recovery installer" (flashrec-1.1.2 2009-0909). They said my phone was 32A, I just went ahead and downloaded and installed - now I have the cyan recovery when I boot up my phone - I just can't flash ANY roms. I tried RAv 1.6 - for both 32B and 32A. 32A keeps rebooting my phone over and over, 32B just sits at the vodafone and hangs for 15 minutes.
After HOURS AND HOURS of reading the forms and the wiki - I'm at a complete impasse. I need some guidance. Do I have a 32A or 32B? Is it possible for 32A phones to show 32B in the fastboot? Some people need a "goldcard" to do this - I just used flashrec did I do something wrong? It seems as if some people are flashing roms with their regular SPLs - do I need engineering SPL - if so HOW do I flash SPL and radio without bricking.
I just want to flash some damn roms, or even get back to OEM and get my phone up to 1.6. It's such a bad feeling buying a phone, then bringing it home and you don't realize what you've gotten......I just want to get my phone rooted and start flashing roms and I've gotten this far.
ANY HELP GREATLY APPRECIATED!!!!!!!!
edit - the only way I've gotten my phone back to the stock HTC MAGIC rom is luckily upon first running of the CYAN recovery I did a nandroid backup and just restored to my backup after the failed rom flashes.
EDIT 2pm CST : I called T-Mobile, they can track your IMEI and Sim card every time you place a call - they CONFIRMED that my IMEI belonged to a TMOBILE MYTOUCH 3G and not any european phone. This leads me to my next question - is it possible to flash this HTC MAGIC rom onto a TMOBILE MYTOUCH 3G through fastboot, or something - WITHOUT a recovery, WITHOUT having root?
My MYTOUCH 3G is running VODAFONE everything, and it's definitely a EUROPEAN HTC MAGIC rom. Did someone install something on this phone before I got it. Please community - any help is appreciated.

A possible explanation is that someone followed Amon_RA's instructions partway through but did not finish. Specifically, they may have flashed the SPL, the recovery image for 32A and then a ROM for 32A. Since the phone is 32B, the recommendation is then to update the radio and recovery and ROM for 32B after it is rooted.
Perhaps this person rooted the phone, and then did not revert to 32B. Just a guess, though.

ok bro first lets calm down. everything is fine. all the information you need is right in front of you. first if its from europe it could be 32b and or 32a. so to check if you have root lets download a terminal app. if you dont have one pm and ill send you one. once we have that run it and type
su
if it asks for permission or just goes to
#
you are good. now type cat /proc/meminfo
for "MemTotal:" if it says 98024 or around there then you have a 32b. there that took care of what kind of board you have now we have radio and splash. your radio is .009. eng radio is .006. most likely the person that had the phone before only did have the steps. so go over them again with doing a "real" rooting. make a goldcard, get a good rec .img and have sdk working on your comp. if you need help i can help the best i can.

my touch 3g problem!! please help!!!
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please

Turn it on while holding the Home key and tell us what you get? If you get a menu of options then you have a custom recovery image and you can flash a new rom ... if you just get an image of a ! then you have the stock recovery image.
Also turn it on while holding the back key, give us the information from that screen (also known as the fastboot screen) as this will tell us what recovery options are available to you.

I feel you man.
richboii8939 said:
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please
Click to expand...
Click to collapse
I worked for T-Mobile and got a mytouch before launch. My MyTouch, During the 32B radio flash, fell off my desk, disconnected, and has been stuck where you are ever since.
doing MANY hours of research and trying VARIOUS different methods did not help. I since bought another, (and a nexus. DO NOT MISS THE MYTOUCH) rooted it and my original MT3G, is still stuck on Vodafone red boot screen, and has a hopefully semi-permanent place in the bottom of my shame drawer.
Mine will not respond to Goldcards, and is not picked up by ADB.
If you plug your phone in, on boot and it is recognized by ADB, then you have hope. If its completely shot like mine. I doubt you'll be able to revive it. Unless ive been missing something since July of last year. (I had it early lol).
If it is recognized.
I would...
-Get a 32B radio
-Open CMD in the radio's folder (Shift + Right click will add a button in your right click to Open Command Prompt There)
-Fastboot flash radio <insert file name here>.zip
-Adb will say "Waiting for Device"
-IF IT IS RECOGNIZED It should reboot into Fastboot and flash the Radio and you should be okay.
*Please correct me if I'm wrong. Im can root all day long, but i can barely explain it. XD*

[Q] HELP - Magic 32a Bricked! weird + Bad

hi,
i need ur guys opinion,
story goes
i have Magic 32a unlocked version.
then i root it to android 2.2.1 using the old radio / hboot combo.
then, i thought i want to update to android 2.3.1
now here is where the problem begins.
i accidently flashed the 32b radio on the phone. now the phone wouldnt go past the HTC Magic logo.
to fix this, i download the mytouch3G sappmig.img file and completely flash the phone over.
when i open fastboot it still using the 32b radio / hboot but this time the os loaded fine.
i install superandroot and superoneclick on the phone to root it
after rooting i tried flashing 32a radio / hboot but it say not allow.
next step i tried installing custom recovery and finally manage to do it using the flashrec app. i installed 32a recovery but it failed to boot it. i tried installing 32b recovery and it run fine.
now from the recovery itself i tried flashing 1.76 radio and the recovery unpack the file just fine. but when it says reboot, the 'Box with arrow and phone outside' image appear for a sec and then dissapear.
after that my htc magic is completely dead. pressing any button, pluging in usb cable or charger yield no effect (like a brick)
have i completely bricked my phone? please help.

Sad to say this, but yes.
You just had a bad radio flash...
Try JTAG.

i tried again after leaving the phone overnight, these are the only thing iam able to do with the phone:
trackball + power = blue led
long press power = led blink red once
plug in charger = battery charge indication light on, orange and then yellow indicating the battery is full.
and thats about it. no other button combo works. and fastboot devices and adb devices booth shows no device.
anyone doing this JTAG repair service?

bump...
im having the same problem...just posted my issue here: http://forum.xda-developers.com/showthread.php?t=959938
i have the blue LED as well...
i googled how to make a JTAG cable...but its really past my level of competence...
were you ever able to get your phone fixed?

you found any solid step by step guide to make the jtag? please post the link here. i want to explore further. tq.

i was having the same problem...initially all went well, manage to change the from SHIP S-on to ENG S-off. i brick my device right after updated the rom to froyo and thereafter unable to boot. everytime i booted my magic, i only sees the RUU (fastbot) page. i cant do adb command. luckily the fastboot flash command still work.
i have try flashing with a lot of different images but always got stuck @ either
FAILED (remote: 42 custom id check fail) or FAILED (remote: 12 signature verify fail). never go beyond that...after going thru so much hassle of finding the right image, i finally manage to get it up and running. it flashes by ROM to enclair (2.1), good enough for me to use whatapp..
specification of my Magic is 32A S-O; radio 6.35.16.19; hboot 1.76.0010
this is how i "unbrick"
Download the SAPPIMG from shipped-roms.com, download Brasil_SAPPIMG_3.54.zip
place the file in android sdk folder, where fastboot resided.
make sure your device is fully charged...
boot your device and connect it to the usb, you will sees RUU USB.
type this command fastboot flash zip XXXXXXX.zip
i hope this help...

[Q] My HTC myTouch keeps rebooting,freezing,no touch?

Ok first off I am new to all of this. This Is my first android smartphone It's a T-Mobile MyTouch 3g. I just bought It off eBay and If I can't fix It then I am out some money PLEASE HELP!!
Have done some reading but can't seem to fix what's going on with this phone . I got It off eBay and the seller said It had problems with the touch screen every so often but other wise worked great In every other way but that Is so so far from the truth.
When you first turn It on It will boot up to the sim pin screen. I have gotten the touch screen to respond long enough to enter my pin once. It will freeze and reboot over and over. The track ball will work once In a while along with the home and back buttons.
I know It's running Superfly TCBY Froyo ROM and I think thats were all the problems are because It does work right every so often so I have been trying to unroot It and put It back to factory rom and settings and start fresh with the hopes that It will fix the problems but the problem now Is when I go into recovery to flash It or make any kinds of changes, It will freeze and reset. I can't even get the recovery menu to work long enough to do anything. Can someone please explain how I can get this phone back to original.
PLEASE HELP

We need your fastboot information. Turn the phone on holding back+power and post the info you see here.

Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
fastboot

Search the forums for "unroot mytouch 1.2" and that'll get you straightened out.
Sent from my LG-P500 using Tapatalk

OK well I did a search and have been doing alot of reading and I managed to get It to load a Generic MyTouch Rom w/Root because when I try to unroot to SAPPIMG Sapphire T-Mobile US 2.10.531.4 release i keep getting main version older update failed so I read to go to a Generic MyTouch Rom w/Root and try again from here
"theunlockr.com/2010/04/26/how-to-load-a-custom-rom-on-the-htc-mytouch-3g"
Still same problem main version older update failed. I can't create a Goldcard to try the Goldcard method because I don't have access to the phone to enable USB debugging. I can't do much with the phone because of the freezing.
I can get Into fastboot and hboot but It still freezes. So I know It's not bricked but touch Is still not working. can load the phone up but pretty much becomes a good paper weigh after a few minutes on. The buttons will not responded, no touch, no access to to anything Inside the phone.
What can I do? Is this phone worthless? Can It be fixed? I feel like I just bought a expensive paper weigh.
As I said before I am hoping that If I can get It back to original settings and rom that It will stop freezing, stop rebooting and the touch, buttons, and system will work right.. What do you think Is causing all of these problems?? No touch, Freezing, rebooting?? How can I get It back to being unrooted and running the original software/rom PLEASE HELP.....

If you have access to recovery you can flash an engineering SPL and the just flash the stock sappimg again and it'll work. I can link ya in a minute.
Sent from my LG-P500 using Tapatalk

I just flashed Engineering SPL 1.33.2005 after doing some research. waiting for It to format cache after flash and reboot. hope this works?
Fast boot info now
sapphire unknown 32a eng s-off h
hboot-1.33.2005 (sapp31000)
cpld-13
radio-2.22.23.02
apr 20 2009,15:30:43
Tried to flash original sappimg got this
Parsing...[SD ZIP]
[1] BOOTLOADER - OK
[2] RADIO V2 - OK
[3] SPLASH1 - OK
[4] RECOVERY - OK
[5] BOOT - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - Fail-PU
Partition update fail!
Update Fail!
now It has went back to
Fast boot info
sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
when i flash the recovery and boot it just goes to the green mytouch splash screen and does nothing.. if i try to boot into recovery manually with power and home it goes to the black screen with the exclamation triangle and a phone...

I can still get Into HBOOT and FASTBOOT but I can not get Into the recovery menu and the phone will not load pass the MyTouch 3g screen.
How can I flash a new recovery img via hboot?
[What I "know"]
My understanding is that I have a Shipment SPL aka "Perfect SPL" with Security on which means I cannot use fastboot.
I also get a "Main version is older. Update failed" when I try to down grade and unroot.
[My Goal]
I want to change my SPL to a engineering one, unroot and get back to stock.

Your going to need to make a goldcard, which means you will need a phone that runs Android. Any phone running Android will work. You can use the guide from here to make it. You'll only need the other phone for Part III steps 1-5 from that guide. Once you get the goldcard made, put this file on it, boot into hboot and flash like you did the other sappimg. That will get you the engineering SPL. Then from fastboot, run this command:
Code:
fastboot erase system
Then, put this SAPPIMG on your regular SD card (or you can replace the other sappimg on your goldcard) and flash it from hboot. Hopefully something in the system partition is corrupted and the wipe will fix it so that the sappimg can write the new system properly.

First off THANK YOU DonJuan692006 for all of your help.. I would love to make a gold card because I think that would solve all of my problems but I don't have access to another phone that runs Android that's why I have not tried that yet. I have no way to make a gold card. I have extra SD Cards but no other phone that runs Android to complete It and my phone will not allow me to do any of that at this point. What else can I do?? Is there any other way to make a gold card?

I will have access to another phone that runs Android In a few days but until then I am stuck.

I have now made a gold card, got the engineering spl Installed and then tried to Install the other file and It gets stuck on system unzipping while updating and then reboots. what can I do now???

Were you able to do the fastboot erase system before trying the second sappimg?
Sent from my LG-P500 using Tapatalk

No I was not able to do that. I have done alot of reading over the last few weeks and I still don't understand how to enter commands In fastboot. So thats why it didn't work?

That was kind of the point in flashing the engineering SPL. All you do is download the AndroidSDK kit. Extract it to somewhere you can find it. Inside of that folder will be a folder called Tools with the fastboot.exe. So you just open a command prompt from there and do the command in my other post.
So, if you were to extract AndroidSDK to the root of your C: drive (as I did), you would simply open a command prompt window by typing "cmd" in either the run box on Windows XP or the "Search" box in Windows Vista and 7, and then type
Code:
cd C:\AndroidSDK\Tools\
Alternatively, if your using Windows Vista or Windows 7, you can navigate in Windows Explorer to the Tools folder and launch a command prompt directly from that folder by holding Shift and right-clicking. There will be an extra option in the menu "Open command window here". Make sure that you don't right click on a file, right-click somewhere in the a blank are in the folder.
Sent from my LG-P500 using Tapatalk

Ok, I understand. I have AndroidSDK Installed. Needed It to make the goldcard. I understand how to do It know. Thanks again for all your help. I will try again the right way and get back.

htc sappher messed up bad

hows it me again well i need some expert help for another htc sappher from my freind and its realy bad , he's flashed a rom and messed up everything dont know how though.
no recovery and the Hboot is S_ON
i cant flash a new rom or SPL cause theres no recovery and becouse i got s_on i cant use that to flash anything so im stuck and i need help.
s_on
(sappher FM 2.1)
radio 6.35.16.19
Hboot 1.33.2005
so i dont know how to fix this i thought of adb tools but dont know much about it ... plz plz guys i need help
thanks guys

well im set up with adb and now the only problem i have is that the phone is on a read only system any ideas on how i can change or get around it?

Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package

5[Strogino] said:
Turn phone off. Turn on by pressing Back + Power (it's fastboot mode). Write here first 5 rows. All symbols are important.
In fastboot-mode check command:
fastboot devices (it it would return serial number - connection is fine)
p.s. You can find fastboot.exe in Android SDK Tools package
Click to expand...
Click to collapse
Sapphire pvt 32a s on H
Hboot 1.33.2005 (sapp10000)
CPLD 12
Radio 6.35.16.19
Apr 20 2009

As you have 32A Magic, you can upgrade to new hboot/radio combination, then downgrade (if you want)
http://forum.xda-developers.com/showpost.php?p=5526163&postcount=1
p.s. Goldcard is important (without it you can not process through upgrade)

So the problem i got is that theres no goldcard?
How would flashing another rom help me i cant flash it with no recovery.
I have fastbootcomander but i cant use that couse of s on, and i cant push any files there adb couse its on a ready only file mod.
Trying to understand
I forgot to menchen that my phone is not deticketing the sdcard i cant mount it and tge card is fine sorry about that .

OMG . There are too many problems together...
Ok. Try to understand what can happen...
1.
You need create goldcard. Search for kingston or transcend sd-card. Make goldcard from it. You can use any Android-phone from HTC. You can ask friends.
2.
I think that problem "no sdcard detection" depends on radio stuck. But when you will run RUU - it does not use sdcard at first step (probably). RUU will try change phone into RUU-mode to flash images.
But. Even if RUU would flash new hboot and radio, it might stuck when flashing ROM (system image), cause at this moment RUU compares CID from phone with CIDs from ROM. Different CIDs will get error and phone will stuck at RUU-mode.

I see ,ill make a goldcard and flash the ruu and see what happens. Thanks alot bud for your help ill keep it updated if all gose well

ish this blows <lol so much to do

ok im downloading the ruu rom the link you gave me (late i know iv been realy busy)
and the goldcard i have to make aswel to make this work probaly

ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro

my sdcard is 32FAT formated.
this sucks , ruu is having problems with the usb connection and i got no recovery still ofcoruse and bootloader is s_on H.
3.39am ish so tired.
need more guidince from a expert.

S.T.A.L.K.E.R said:
ok im having trouble with the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver its complaing that th usb connetion erro
Click to expand...
Click to collapse
1. Solve it. Install Htc Sync, it has drivers. The best configuration - have 32bit Windows XP.
2. Additionaly, you can boot into fastboot-mode (back + power), then run Ruu. But drivers are more important.
P.s. in rare cases there are problems with usb-cable (when it is not stock), or with usb-port (rear usb-port 2.0 is preffered).
Sent from my A7-040 using Tapatalk

thanks bud ,im being a pain in the backside

Ok I flashed the ruu Rom ,what's the next step to getting s_off .
Iv tried to use the acs supertool but my spl is not supported. I'll give you the full details when iv got time but that's the news so far
Sent from my HTC Magic using XDA App

Pvt ship s_on H
Hboot 1.76.0009
Radio 6.35.08.29
Sent from my HTC Magic using XDA App

Try to get root by SuperOneClick: http://forum.xda-developers.com/showthread.php?t=803682
But i don't know is it work at Android 1.5
'Shell root' is enough
If not - you should flash RUU 3.05.401.1 (that has su already)

[QUOTE
If not - you should flash RUU 3.05.401.1 (that has su already)[/QUOTE]
That's the ruu Rom I'm using
Sent from my HTC Magic using XDA App

I have a feeling I have to make a goldcard
Sent from my HTC Magic using XDA App

Look at december's post. You wrote about 3.05.401.3
What exactly do you have? 401.3 or 401.1 ???
Sent from my A7-040 using Tapatalk

Is this HTC Magic bricked?

Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.

Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk

hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.

Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?

same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol

5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.

Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.

jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk

But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.

those all sound like bricks..

problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.

huahua!!!!
No one post about my problem...