Database Users

Error [300]: Invalid Update Tool...

What should be done if this error is flashed while using almost all the versions of UPP.
I've used version 3.6.3.5 at max.
Can anyone suggest me a version which can work for me. Preferably a higher version of UPP, along with download link.
wbr
Disillusioned

hey...
try to flash the original ROM first by SD card flashing (info about it HERE)
anyway this tool may help you. it's a a tool for flashing (not RUU)
HTCFLASHER

Disillusioned said:
What should be done if this error is flashed while using almost all the versions of UPP.
I've used version 3.6.3.5 at max.
Can anyone suggest me a version which can work for me. Preferably a higher version of UPP, along with download link.
wbr
Disillusioned
Click to expand...
Click to collapse
Did you run USPL first?

Nothing is working.
SD Card Flashing shows Invalid Certificate with the original ROM, and same with all the others.
My Detailed post is here :
http://forum.xda-developers.com/showthread.php?p=2748739#post2748739

Why Error Message
Upon doing getdevinfo on MTTY if you get GetDeviceCID: Error - InitDecoder
Then all RUU versions will give this error.

Problem in X7500

Urgent Help
I installed Rom 6.1 with spl3.5 yesterday , but my phone previous rom was spl1.2. now when
I finish any rom installation and restarting my phone , I go back to the begining of installation .
The original rom can not be installed and recovery message appear on the screen and error is shown

MOHAMMAD K said:
Urgent Help
I installed Rom 6.1 with spl3.5 yesterday , but my phone previous rom was spl1.2. now when
I finish any rom installation and restarting my phone , I go back to the begining of installation .
The original rom can not be installed and recovery message appear on the screen and error is shown
Click to expand...
Click to collapse
Hi mohammad
I assume you know your way around flashing.
I suggest going into bootloader to confirm that you have SPL 1.2 and then flashing any SPL1.2 rom from the bootloader.
make sure to remove sim and sd card

PLEASE software address

MOHAMMAD K said:
PLEASE software address
Click to expand...
Click to collapse
Look in the sticky threads an the athena mobile6 section
http://forum.xda-developers.com/forumdisplay.php?f=380
Sergiopi has a thread with updated links to all the roms.

Probles Falshing A New ROM

Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks

new-b said:
Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
Click to expand...
Click to collapse
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't

Nope, its not full. Far from it actually lol.

new-b said:
Nope, its not full. Far from it actually lol.
Click to expand...
Click to collapse
flashing trough sd-card?

im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.

xmoo said:
flashing trough sd-card?
Click to expand...
Click to collapse
Nope, win mo device center.
WeaponX2010 said:
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
Click to expand...
Click to collapse
Its in the tutorial, but I havent tried it yet. Ive never had a problem flashing through the USB before.

Tried it from the SD card. Went great. Just takes a little longer.
Still open to suggestions about usin active sync though.

xmoo said:
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Click to expand...
Click to collapse
Hi xmoo. Can YOU please help? With this:
leo70 said:
URGENT MAJOR HELP REQUIRED *PLEASE*:
I am stuck on DFT boot screen (after doing 1234-vol up_down-wp7-reset) and this is *after* (wp7 here !) all the chains b4 that are done: ie: power on, hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage. yes, was Windows Phone 7 and activated using dev hack with marketplace & xbox/live. Also - although I activate ok and can use it on market fine once it boots good - still when both my hd7 (hd2) and Mozart are signed into XboxLive using same address at same time: (mozart is legit fully/eula-signed etc) then the hd2 seems to reset a LOT here at this point. maybe this has something to do with usual xbox-live security? ie: http://www.wpcentral.com/hack-xbox-live-windows-phone-7-get-perma-banned-microsoft ?????????? please hlp me - I am fully capable of mtty, sd-leoimg, whatever it takes- but need to know why this would be the case? same with Android roms/stock too. Anyone know about task2a on hd2? how many bad blocks I should have? partition/re-partition droid or wp7 to avoid these bad blocks? I just WISH Cotulla/DFT let you run the windows phone 7 installer in such a way that all bad bloks could be excluded totally as if the never exist... ie make hd2 clean.
Click to expand...
Click to collapse
note: although I have gone bak to original spl+rom in past I have (both unsuccs &succesfully) have previously done task2a and even spl-mfg install and radios/roms as DEBUG/SPL-MFG. xmoo?

[NoDo ROM]HD7_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.1 5_NoDo, by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_TMOUS_1.20.531.01_Radio_5.51.09.11a_22.31.50.09U
2. RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.531 i.e. with characteristic value 531
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_TMOUS_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar

Oh yeah! Thanks a lot Ansar!! By the way, is there a reason we need to flash both roms?

Thx =)
Who know, how i can flashed to European Version with out gold card?

kwill said:
Oh yeah! Thanks a lot Ansar!! By the way, is there a reason we need to flash both roms?
Click to expand...
Click to collapse
Hi,
It is the flashing process, thnx for supporting.
Regards. ansar

FlexIDK said:
Thx =)
Who know, how i can flashed to European Version with out gold card?
Click to expand...
Click to collapse
Hi,
You are on the right track!!!
There is nothing more but flashing the provided ROMs.
Regards, ansar

ansar.ath.gr said:
Hi,
It is the flashing process, thnx for supporting.
Regards. ansar
Click to expand...
Click to collapse
Understood.
Also, anyone have a mirror for the second rom yet? As rapidshare failed once and made me waste a second download (having to wait 55 mins).
*edit* I'm getting error 226 (Flash Write) when flashing the first rom at about 95% through. Wasnt sure this was the error you were referencing as you mentioned error270. And when I try to flash the second rom I get invalid model id. I imagine thats because the first flash didn't work properly.

Russian mirror
B.1
http://narod.ru/disk/7988412001/RUU....54.09.21_22.33b.50.10_NoDo_by_ansar.zip.html
B.1 (reload)
http://narod.ru/disk/7994616001/RUU...4.09.21_22.33b.50.10_NoDo_by_ansar_2.zip.html
B.2
http://narod.ru/disk/7989127001/RUU...21_22.33b.50.10_NoDo_Signed_by_ansar.zip.html

ansar.ath.gr said:
Hi,
You are on the right track!!!
There is nothing more but flashing the provided ROMs.
Regards, ansar
Click to expand...
Click to collapse
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID

Oops, two guys have the same error when flashing this ROM, anyone else?...

FlexIDK said:
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID
Click to expand...
Click to collapse
Same thing here.
Reverted back to RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U_by_ansar.
[]'s
Cris

FlexIDK said:
On my HD7 install RUU_Schubert_TMOUS_1.54.531.02_Radio_5.51.09.29a_22.32.50.10U
I'm install RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_by_ansar
On 95% - i'm have error (#226 Flash Write)
After
I'm try install
RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_NoDo_Signed_by_ansar
And see message INVALID MODEL ID
Click to expand...
Click to collapse
Hi,
An issue with the B.1. ROM may be has been encountered.
Now it is re-uploaded, you can proceed again and let me know if it is ok.
Regards, ansar.

Ok. So the first rom installed properly after the reupload. But, still getting the invalid model id error upon trying to install the second rom.

Yup I got the same error message at 95% also.
Also is there any way you can provide other mirrors for the files? Having to wait 40+ mins to download a second file is annoying. Especially when there was a problem with the first download making it useless.

I got an error too
kwill said:
Ok. So the first rom installed properly after the reupload. But, still getting the invalid model id error upon trying to install the second rom.
Click to expand...
Click to collapse
after 1%, please fix asap.

ecyoral said:
after 1%, please fix asap.
Click to expand...
Click to collapse
Same here now. Now I have to wait another 40 mins to re-download fixed file once available.

Can we flash other ROMS after this one?
Hi ansar.
After we sucessfull flash this new ROM, will it be unbranded, right?
So, would we be able to flash another ROM, like the ASIA one?
Regards and great work, I'm just waiting for a fix for the 2nd ROM and will flash it.
[]'s
Cris
PS: by the way, how can I support your work? Can I buy you some beers? =)

Install TMOUS_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10_NoDo_ansar
after
Installing RUU_Schubert_TMOUS_1.69.401.01_Radio_5.54.09.21_22 .33b.50.10_NoDo_Signed_by_ansar
"INVALID MODEL ID" Error ....
Help Me T.T

same bug than the other guys..

Any chance of just getting the branded rom from you?

i really, really hate RAPIDSHARE..
why u all are uploading to that site.. use Megaupload or something better..
40min waiting for a D*mn download
¬¬

Udpate Error 801812DC

Hi, when i try update ROM (http://forum.xda-developers.com/showthread.php?t=1236027) (from 7008 to 7392) after 2% backup Zune show restarting and give me error 801812DC. I try it with 2 different sd card and with 2 PC and always same error.
Anybody can help? Thanks

Yea I had that. Uninstall Zune before you do this update. Delete the contents of the Zune folder in Program Files, then reinstall zune and run the update again.

nikc0069 said:
Yea I had that. Uninstall Zune before you do this update. Delete the contents of the Zune folder in Program Files, then reinstall zune and run the update again.
Click to expand...
Click to collapse
Thanks, but no luck with that. Still show error. Any other idea?
EDIT: And after last atempt to update (after error) phone stuck on SIM Pin page and I must do 3 hard reset.

Ok, I try it now again and now backup status stuck on 1% and again resrart and error, and again freeze PIN page...

Does it work if you don't use a sim that requires a pin?

nikc0069 said:
Does it work if you don't use a sim that requires a pin?
Click to expand...
Click to collapse
No it stuck on another (first screen after start)
EDIT: Now I try completly instal WP7 again (WM 6.5, Radio ROM, MAGLDR, try also radio ROM 5.51T..., still show update error and still freezing)

This is a bad rom,I will wait some better, it is full errors.

glorfindel.mladenovic said:
This is a bad rom,I will wait some better, it is full errors.
Click to expand...
Click to collapse
Yeah, me to. I don't think this is bad ROM but after 3 days of testing I need working phone so i must go back to android...