Related
Hi all,
This is my first post in this forum. Just got my HD2 yesterday & immediately set about installing a new ROM. I installed HSPL without any issues, but I'm having problems installing a new ROM. I've downloaded a couple in .exe format, synced up the phone to WMDC in Win 7, then when I start the exe file everythings fine until it starts to install, then the 4 colurs come on to the phone, and then the USB connection drops so WMDC isn't connected, then I get the error 266 (or 226). I used to have a touch diamond that did this, but I can't remember how you get the connection to remain whilst uploading the new ROM. I've had a look through the forum, but can't find the answer. Can anyone give me some ideas?? Does the phone need to have certain settings applied to it before flashing?? I'm not exactly a noob to flashing ROM's, but can't work this one out!! Thanks all.
just extract the exe, rename *.nbh to LEOIMG.nbh, put in ur microSD root, enter bootloader, press power button when u asked to do so. soft-reset when complete. feel free to pm me n i will guide u.
SD card method is the quickest way to brick your phone...
I use W7 64bit with WMDC and have never had an issue. Custom ROMs comes as an NBH file and tend to have CustomRRU.exe with them to run them. Run the EXE as an admin and you shouldn't have any issues.
Obviously check that when in the bootloader it does say SPL is 1.42.HSPL
When I flash a ROM, it turns the phone off (Windows knows that as it makes a sound) and then when the bootloader comes back up it says USB, Windows makes a sound for plug in and it starts.
EddyOS said:
SD card method is the quickest way to brick your phone...
I use W7 64bit with WMDC and have never had an issue. Custom ROMs comes as an NBH file and tend to have CustomRRU.exe with them to run them. Run the EXE as an admin and you shouldn't have any issues.
Obviously check that when in the bootloader it does say SPL is 1.42.HSPL
When I flash a ROM, it turns the phone off (Windows knows that as it makes a sound) and then when the bootloader comes back up it says USB, Windows makes a sound for plug in and it starts.
Click to expand...
Click to collapse
Hi, I'm using the same OS. I've tried running as admin but it still drops connection. The SPL is 1.42.HSPL. It just starts the update, then I see the phone disappear from the connected devices, then WMDC shuts down & a few seconds later the error message comes up??
you started flashing this fast only after one day of use
You don't need WMDC open - just close it once it says you're connected
The run the file and it should work.
As mentioned, why are you flashing it out the box? It's always best to get to know the device as it might just work as it is...perhaps try a stock ROM if you're not already using the newest one and go from there
EddyOS said:
SD card method is the quickest way to brick your phone...
Click to expand...
Click to collapse
I agree. not that there is anything technically unsafe about it, but unless you are fully aware what you are doing it's so easy to flash the wrong thing.
example,you flash a 1.66 stock rom from sd card but don't like it.you goo to change it but get a fail. why? because flashing stock from sd card also overwrites the spl.
no problem you say, I'll reinstall hspl.... only you can't because hspl needs spl 1.4 to instal and your 1.66 flash installed spl 1.6
worse still you instal one of the test roms from t mo us that are 2.0x which can't be downgraded even by gold card and you are stuck with spl2 until the geniuses that are the hspl team release hspl2.
just a thought...are you running as administrator? right click, run as administrator
samsamuel said:
I agree. not that there is anything technically unsafe about it, but unless you are fully aware what you are doing it's so easy to flash the wrong thing.
example,you flash a 1.66 stock rom from sd card but don't like it.you goo to change it but get a fail. why? because flashing stock from sd card also overwrites the spl.
no problem you say, I'll reinstall hspl.... only you can't because hspl needs spl 1.4 to instal and your 1.66 flash installed spl 1.6
worse still you instal one of the test roms from t mo us that are 2.0x which can't be downgraded even by gold card and you are stuck with spl2 until the geniuses that are the hspl team release hspl2.
just a thought...are you running as administrator? right click, run as administrator
Click to expand...
Click to collapse
Didn't know that, glad I have HSPL on my phone now!! lol
lots don't and that's what makes sd flashing dodgy. in the case of 1.6 it can be downgraded with a 1.4 spl stock rom.its just a pain. but 2.0 spl can't. check out the horror stories in my sig.
Yeah read about them, I nearly bricked my phone using the SD card method the first time I flashed but luckily the WMDC flash with my stock ROM got me back to normal!
I was trying to flash the stock 1.66 ROM, but it still disconnected. I have 1.43.206.4 WWE at the moment. The reason for flashing straight away, is usually the stock ROM updates are to improve / fix previous issues. This is why I wanted to start with a stock ROM & maybe move onto a cooked ROM at a later date. Does it make any difference when starting from an .exe file instead of RUU? Do you have to change something on the phone itself to allow it to stay connected?? cheers everyone for your comments.
run the exe as administrator, the phone should restart into boot loader (three colored stripes) and then flash.
samsamuel said:
run the exe as administrator, the phone should restart into boot loader (three colored stripes) and then flash.
Click to expand...
Click to collapse
Just tried it again & still no joy. It starts, the phones switches off, thats when it loses connection, then the bootloader appears, then about 10 secounds later it says error 266 connection lost. Still stumped???
Sounds like the device isn't reconnecting with the PC once in the bootloader - try another one...
with the phone in boot loader unplug the usb and plug back into a different port. preferably a port directly on the motherboard (round the back) not through a usb hub or slot in the case.
Sussed it now. I'm a mac user using Win7 using VMware fusion. I think it was this that was causing it to not detect the phone once it had started flashing the ROM. I tried it on my work laptop running XP & voila, it flashed immediately. Thanks everyone for your comments - no doubt I'll be posting a few more questions soon!!!
ah good stuff.
todays lesson ? put all the system info in the first post!
clemo71 said:
Sussed it now. I'm a mac user using Win7 using VMware fusion.
Click to expand...
Click to collapse
Ahhh... yes, that's the kind of non-standard setup that would make sense mentioning right away indeed. Everything that touches hardware level is rarely friendly to emulation, virtual machines, resource sharing and so on...
1st lesson - use a PC!!! POW!! lol
Ok.....next question. I've tried to flash a rom using the customruu file, but all it does is open up the contents of that file. I'm using XP Pro. Any ideas why anyone???
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
trexxcrap2 said:
hi guys,
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
can anyone assist me with updating? i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
What are you trying to update it to?
secano said:
What are you trying to update it to?
Click to expand...
Click to collapse
the new update that came out a few days ago....
trexxcrap2 said:
im attempting to update my hd2 but cannont. i sync it with active sync, start the update and it changes the phone to the tri color screen, but immediately disconnects on the computer, and a 1 minute later i get the error [260] connection screen.
Click to expand...
Click to collapse
Here is a link to the error codes. Your error means you need to go back to SSPL before you can flash that ROM.
trexxcrap2 said:
i also heard there is a way to update from the memory card...that might be the best way for me if someone can help me with that. THANKS
Click to expand...
Click to collapse
Here is a link to my tutorial on how to flash via SD card.
i am having the same issue each time i attempt to update my rom. error 260.
jenelson said:
i am having the same issue each time i attempt to update my rom. error 260.
Click to expand...
Click to collapse
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
I don't know if you are totally new to flashing ROMs or not, since you didn't say and your post indicator said that was your first post here, but I would advise you to be very, very careful. In the early days (last month, actually) a TON of people were bricking their phones because they accidentally downloaded the European ROMs for the 512Leo. Ours is the 1024Leo and only ROMs designed for our phones will work.
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
nyaznteen said:
same thing happened to me, what i did was i restarted the update without disconnecting the phone from the computer, and it worked.
Click to expand...
Click to collapse
I encountered the same problem and it appeared that my computer was slow in "re-recognizing" the phone. For some reason, it had to reinstall drivers before continuing with the update. After the device was again recognized, I restartde the update (without disconnecting the phone) and it continued without issue.
I had been worried that the phone had become a paperweight when I saw the tricolor screen, but everything has been fine and the upgrade appears to have worked correctly.
jenelson said:
The phone I am using is actually a replacement from TMO. I was having issues with the original device I purchased.
How do I use a HSPL or whatever... I am slightly confused but I can catch up quickly...
Thanks.
Click to expand...
Click to collapse
Think of HSPL as your BIOS (it isn't, but it may help you to think of it as such). You don't have any control over the options, but you need it to load or install your OS. Installing HSPL is simply a matter of following the directions in the link that I posted last time: http://forum.xda-developers.com/showthread.php?t=653614
Once you have HSPL installed, you should be able to "flash" any ROM. Of course, this also allows you to flash ROMs that are not meant for your phone, so that's the danger behind it.
When you visit a thread that offers a ROM, it should either have instructions or a link to instructions on how to install. If it does not, a google search for "xda how to install a custom rom" should give you a million helpful links. (This is actually beyond the scope of this post so I won't go into details)
Hope this helped some...
Same problem but i have hspl?
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
mumbles85 said:
not sure what im doing wrong here I've installed hspl 1.42 which was enough trouble for what seemed like a pretty straight forward job. now whatever i try to install all i get is error 260? on top of this i don't seem to be able to send message tho i can receive and the camera on my phone no longer seems to work?
i am a newbie but Ive been reading and clicking and trying to install stuff for hours and hours and so far all Ive managed to do is install hspl and reduce my phones usability.
i got windows mobile device center 6.1 tried it with and without allow usb connections.
my antivirus and firewall is off.
.net framework 4 installed.
tried different usb ports
ive tried installing Duttys_Leo_Sense_2.5_5.23569.5.5.0_2.14_Holy_Grail_576MB_V4.3_WWE and a stock rom
my computer has vista 64 on it.
im hoping im just being a bit dense here please help me i just wanna join in on all this flashing fun!!
Click to expand...
Click to collapse
just for kicks did you try a different ROM, find another ROM that is Compatible and try it, not saying there is anything wrong with Dutty's , but could just be the download , but not sure since you tried stock too ...
You may need to reinstall HSPL3, if you tried to flash a stock rom, and even if it failed it could have removed HSPL ...
Also try plugging the USB cable into the back of the machine
error 260 1024hd2
Hey guys,
I am having the same issue although I may know the answer but not sure how to fix it. Prior to flashing chuckyRom, I installed HSPL but I don't think I installed the correct version (still worked). So does anyone think this entire problem is attributed to initially installing the wrong hard SPL. If so, how can this be fixed? android is running great on chuckyRom but it would be nice to use a rom that is used for more than running android.
Please help, I have been in misery trying to solve this for over two weeks now.
Error 260, T-mobile HD2
Error 260 during ROM update
I had the same problem and tried everything (?)
Finally I got it work.
After I started the update the first time, I got the message, driver was not installed successfuly ...blabla
I ignored the message, tried and the connection disconnected every time again.
At the end I used another usb port and it asked me to download the CDMA driver. After download and installation, the update was in 5 min. done
Snarksneeze said:
You are still using the original SSPL (Soft Second Program Loader) which will only accept official update ROMs.
In order to flash the custom ROMs available here, you will need to flash in a HSPL (Hard Second Program Loader).
Click to expand...
Click to collapse
He was trying to install the OEM rom. I'm doing the same and have the same issues.
Error 260 on Htc Hd2 running windows mobile 7
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Dizzle88 said:
I cannot get data on my hd2 when I installed win7 so I wanted to downgrade the os back to 6.5 but I get Error 260 when I connect to my phone to my cpu via usb. Is there a work around?
Click to expand...
Click to collapse
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Error 260 connection in HTC HD2
Dear all;
i have this problem in windows 7 each time i connect my phone with pc it gave me error 260 , so when i connect the usb cable i choose the first choice sync not the default one storage and it worked for me .
Ahmed Hosni
thanks for the note
fred_up said:
Put the phone into BootLoader Mode then connect to the PC. Run the ROM.
Click to expand...
Click to collapse
First time flashing the radio and kept getting error 260 from CustomRUU.
Read so many threads and all say sync the phone with your PC and run CustomRUU. Nobody said to run it under BootLoader Mode.
This simple note helped a lot for a newbie like me.... thanks
Error [260]
Hello
I want to try to update my HD2 from 2.2 to 2.3.x but I always geht thr Connection error.
I´ve flashed my HD2 from Windows Mobile 6 to Android.
I thank you for your help.
Hey so i just picked up an hd2 on craigslist. when the seller handed my the phone he showed me the phone working and then did a hard reset so i thought nothing of it and took the phone while it was resetting. then while waiting for it to boot i noticed it was taking quite a while so i took out the battery and let it reboot, it turned on then froze on the homescreen. i've tried several hard resets and have gotten the phone to the point where it works but only after putting in a removing the battery several times and the phone sticking on the "stick together" logo. I was going to try to do the newest tmobile update on the phone using the one available on their website but now i have an issue plugging the phone into the computer or wall adapter as it will make the phone freeze and ill have to go back through my removing the battery 5 times process. is this some sort of common issue with a common fix or should i take the phone to tmobile or htc and see what they can do for me. i dont have a receipt as a purchased the phone on craigslist so im not sure tmobile will do anything for me.
Edit: i can now connect my phone to the pc i'm trying to update to 2.13.531.1 but i got to 8% but the update froze there and the phone currently has no image version. I'm using windows 7 ultimate and ive tried to run as administrator and with xp service pack 3 compatibility.
thatg said:
Hey so i just picked up an hd2 on craigslist. when the seller handed my the phone he showed me the phone working and then did a hard reset so i thought nothing of it and took the phone while it was resetting. then while waiting for it to boot i noticed it was taking quite a while so i took out the battery and let it reboot, it turned on then froze on the homescreen. i've tried several hard resets and have gotten the phone to the point where it works but only after putting in a removing the battery several times and the phone sticking on the "stick together" logo. I was going to try to do the newest tmobile update on the phone using the one available on their website but now i have an issue plugging the phone into the computer or wall adapter as it will make the phone freeze and ill have to go back through my removing the battery 5 times process. is this some sort of common issue with a common fix or should i take the phone to tmobile or htc and see what they can do for me. i dont have a receipt as a purchased the phone on craigslist so im not sure tmobile will do anything for me.
Click to expand...
Click to collapse
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
can someone also help me figure out how to get the ruu.nbh file off this rom and how big it should be so i can try to flash it from the sd card. thanks
http://forum.xda-developers.com/showthread.php?t=681030
zelendel said:
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
Click to expand...
Click to collapse
i found a .nbh file on my computer that was 4mb and renamed it leoimg.nbh then tried putting it on a freshly formatted fat 32 micro sd car and went into bootloader mode but the phone gives me an upgrade error, asks me to try again and just goes to a white "loading..." screen now the phone is stuck here. its like the newest issue is the one im stuck with. now i cant get the phone to sync with the computer or run the .exe to recognize the phone
thatg said:
i found a .nbh file on my computer that was 4mb and renamed it leoimg.nbh then tried putting it on a freshly formatted fat 32 micro sd car and went into bootloader mode but the phone gives me an upgrade error, asks me to try again and just goes to a white "loading..." screen now the phone is stuck here. its like the newest issue is the one im stuck with. now i cant get the phone to sync with the computer or run the .exe to recognize the phone
Click to expand...
Click to collapse
What error did it give you? Found an nbh file? was it from a stock rom? Do you have Hard SPL on it? If it doesnt have HSPL on it then you will only be able to load a stock rom
zelendel said:
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
Click to expand...
Click to collapse
+1 or flash the phone then task 29 it.
Sent from my HTC Desire using XDA App
zelendel said:
What error did it give you? Found an nbh file? was it from a stock rom? Do you have Hard SPL on it? If it doesnt have HSPL on it then you will only be able to load a stock rom
Click to expand...
Click to collapse
no i have not run hard spl so i can only install a stock rom a suppose. the exe gets stuck at 8%, i have no idea where the right nbh file is. i read somewhere when you run the exe it installs the nbh in a temp folder but im not sure i found the right one. ive also downloaded task29 and tried to run as admin but it doesnt do anything just goes to the htc install screen and stays at 0% Getting frustrating it was working fine actually before i tried to install the new tmobile software update. ive read that task29 gets rid of extra leftovers of other roms and might help the exe finish up on the phone and get past that 8% wall but it doesnt seem to be working for me
right click the stock exe file choose extract here, will give 9 or so files, one of them is about 200meg and is called ruu_signed.nbh that's the file you want.
randomly flashing nbh files that you don't know what they are, that's about the stupidest thing you can do...... you deserve a brick for being an idiot.
samsamuel said:
right click the stock exe file choose extract here, will give 9 or so files, one of them is about 200meg and is called ruu_signed.nbh that's the file you want.
randomly flashing nbh files that you don't know what they are, that's about the stupidest thing you can do...... you deserve a brick for being an idiot.
Click to expand...
Click to collapse
lol thank you for the words of encouragement, so i've extracted the .nbh file its 268mb, renamed it to leoimg.nbh tried the update from the sd card and it fails at the radio says, update terminated, update FAIL. any idea where to go from here?
Edit: i've run hspl3 on the phone is boot loader mode and have also run task29 from doloop but still get the same error with the tmobile file. 8% using the exe and FAIL trying to flash from the sd card
heh you're welcome. (i was harsh to make the point,,, if you found a random bottle of liquid that said petrol on it, you wouldn't put it in your car till you were sure it was petrol, right?)
as to why it failed, i'm not sure, i think i'd probably hspl3, choose 2.08.hspl, then try flash a radio on its own (see the tmous radio thread) because it could be a bad radio.
just please confirm the exact filename of the .exe you extracted ruu_signed from?
samsamuel said:
heh you're welcome. (i was harsh to make the point,,, if you found a random bottle of liquid that said petrol on it, you wouldn't put it in your car till you were sure it was petrol, right?)
as to why it failed, i'm not sure, i think i'd probably hspl3, choose 2.08.hspl, then try flash a radio on its own (see the tmous radio thread) because it could be a bad radio.
just please confirm the exact filename of the .exe you extracted ruu_signed from?
Click to expand...
Click to collapse
The first exe file, which got to 8 percent then went red and failed was
T-Mobile_HD2_MR_Software_2.13.531.1
After hspl3 and using task29 i tried flashing this exe which gets to 99% and fails
RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42
that second one, did you flash from sd card? cos its a manufacturing test rom, and if so then you may now be stuck with a test spl of 2.02, and if so things just got a heap worse,,,
go into bootloader and tell me what it says next to spl
samsamuel said:
that second one, did you flash from sd card? cos its a manufacturing test rom, and if so then you may now be stuck with a test spl of 2.02, and if so things just got a heap worse,,,
go into bootloader and tell me what it says next to spl
Click to expand...
Click to collapse
i tried flashing using the .exe method in bootloader mode. next to spl it reads -2.08.hspl 8g XE
it now says
Upgrade ROM code error
ah ok, good.
so, it seems to be the radio causing the error, so since you have hspl installed, why not try a custom rom? they don't include a radio, so it may bypass the problem.
samsamuel said:
ah ok, good.
so, it seems to be the radio causing the error, so since you have hspl installed, why not try a custom rom? they don't include a radio, so it may bypass the problem.
Click to expand...
Click to collapse
Which do you suggest, i bought the phone so that i could ultimately install android on it. but it seems i'd be lucky to even have wm running on the thing
Edit. just tried kumars classic rom, renamed to leoimg tried running off the sd card, The update finishes successfully but after i hit the reset button on the back of the phone i just see the tmobile stick together logo and the phone doesnt boot. Do a lot of people struggle with the hd2s or do i just have a bad example here?
well unfortunately i think you may have a dud. its the radio that is preventing it from booting.
it could be the radio from that test rom, it could be something else (but still the radio)
options...
its still under warranty, speak to t mobile and/or htc, but don't mention flashing and be sure to remove hspl if you do send it back. (run hspl3, choose 2.08.0000, that's stock)
or
look on here for a user called xmoo, he knows a lot about this sort of problem, (im just good with regular flashing issues)
im having the same issue so if you believe its the radio will installing different radio maybe fix the problem?
i;ve tried installing a new radio from the sd card. it goes red and fails
It sounds like a hardware issue at this point. I'm willing to bet you fried something when you pulled the battery in the middle of the master reset.
Hope thats something htc will cover. Phones on its way over
Hi,
Check out my bootloader screen, this doesnt look ok to me
Tried loading severel older radio's / rom's they all fail after 1, 4 or 19 % with the second error included as a jpg!
Can someone help me fix my 2nd HTC HD2 ?
TIA
Most recently, there seem to be quite a few people having issues with defective bootloaders. Somewhere in another thread, some guys actually were able to bring back the correct SPL with this method:
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
Click to expand...
Click to collapse
The key difference and important point is to take out the battery, keep it out for a while, and pushing the bootloader buttons while re-inserting the battery (yes, can be a little tricky).
The LEOIMG.NBH should be a ROM which is made for your device, eg. the stock ROM which was original on your device when it was brand new. If you´ve got a Leo1024 (US device), please make sure twice you´ve got a correct ROM. A wrong Radio ROM can completely brick your device, only professionals could fix that.
In case you don´t know where to get the leoimg.nbh file: Download the stock ROM for your device, decompress the RUU.exe file with WinRar (or a similar program), rename the nbh file which you´ll find in the decompressed files to leoimg.nbh, there you go.
The SD card should be freshly formatted FAT32.
Hope it works that way...
Thanks, havent tried it with the battery out for longer then 3 seconds. When i put a stock rom on the sd it just says loading, then checking and then it boots back to the bootloader!!! Gonna try it again but keep the battery out longer.
complot said:
Thanks, havent tried it with the battery out for longer then 3 seconds. When i put a stock rom on the sd it just says loading, then checking and then it boots back to the bootloader!!! Gonna try it again but keep the battery out longer.
Click to expand...
Click to collapse
Just some questions.
- Witch SD-Card do you used? a 2GB SD-card is preferable. (And be format by FAT32.)
- Witch Stock Rom did you use?? Did you download it from the HTC webpage by using your S/N?
- And I don't know if you know it, but you need to rename the RUU_signed.nbh to leoimg.nbh.
1GB
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
And i renamed it
It says loading, then instead of giving the screen with all the options that you see in the youtube video it says checking and on top it shows the following numbers 00058002
complot said:
1GB
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
And i renamed it
It says loading, then instead of giving the screen with all the options that you see in the youtube video it says checking and on top it shows the following numbers 00058002
Click to expand...
Click to collapse
Just to be sure; your device is a Dutch version? and you downloaded the stock ROM by using Your S/N? (this is important)
On the HTC website there are 3 rom's to be downloaded.
1 = Vodafone and my sn doesnt allow me to use that one.
2 = My SN allows me to download this one and is from 02-02-2010:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
3 = My SN allows me to download this one aswell and is from 19-12-2009:
RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Wich one should i try?
complot said:
On the HTC website there are 3 rom's to be downloaded.
1 = Vodafone and my sn doesnt allow me to use that one.
2 = My SN allows me to download this one and is from 02-02-2010:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
3 = My SN allows me to download this one aswell and is from 19-12-2009:
RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Wich one should i try?
Click to expand...
Click to collapse
Take this one; "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 7U_2.06.51.07_Ship.exe"
PS; download from there second serer (Europe 2) (the first one have lot of problems)
PS 2; not sure if it will help/work. Your bootloader is corrupt.
kurt-willems said:
PS 2; not sure if it will help/work. Your bootloader is corrupt.
Click to expand...
Click to collapse
That one didnt work!
I will try the other one aswell!
complot said:
That one didnt work!
I will try the other one aswell!
Click to expand...
Click to collapse
Not needed, it's the same except the photo update and some minor updates.
Nope, unfortunatly that didnt work neither.
Damn this sucks donkeyballs man.
kurt-willems said:
Not needed, it's the same except the photo update and some minor updates.
Click to expand...
Click to collapse
So, im fuc*** now?
complot said:
So, im fuc*** now?
Click to expand...
Click to collapse
hmm, for the moment I don't see a direct solution.
But just a question; how was this issue created/started?
I mean when did this problem become, what did you do?
I wanted to put android on my daughters hd2, i started working with this newb guide:
http://forum.xda-developers.com/showthread.php?t=893948
Step 1 finished well i think:
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio *HERE*
Then i did the HRDSPL bit and it showed we hacked it, then i did the magldr shizzle and it got screwed!
This is the screen is get btw!
Cant believe that this is it? I can toss the phone away now? Anyone?
This might be alil' stupid, but have you tried Task29 ?
P.S: Your tags to the thread are ~~~> xD !!
Thanks but i tried that, ClydeB1 gave me the a tip to try and will do so in 8 hours from now
ClydeB1 said:
I see that your model id in your screenshot of the bootloader screen seems all screwed up. This is an old fix I stumbled across to allow users to bypass the model id check when running hspl, you may want to give it a go.
Click to expand...
Click to collapse
That **** didnt turn out as wanted, i can flash it to 2.08.0000 and 2.08 hspl now but still cant flash stock rom
Goldcard is next on my to do list it seems !!
http://forum.xda-developers.com/showthread.php?t=825397
Before goldcarding,
Since your bootloader is corrupted, you can try SSPL?
Give it a shot, you have nothing to lose. (Except to completely brick your phone )
i have here my phone htc hd2 i update the rom,but it stock to 8% then i tried the sdcard process but it also stock at around 5%...now whenever i start my phone it have a error saying software update failed please try again..i did a couple research and i think i will not supposed to do it by my self..,i need a professional and experienced dude to pLEASE help me with this.,,please please please...im a newbie here,,
what are you updating? the windows mobile rom 6.5?
luciferps said:
what are you updating? the windows mobile rom 6.5?
Click to expand...
Click to collapse
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
btw here what in my rainbow screen
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8GXE
0x05
CotullaHSPL 0x05
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , , (source)
Thank you for the reply.
I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside?
I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
Click to expand...
Click to collapse
call me Mr suspicious, but compare the wording to your post...
miko30 said:
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
Click to expand...
Click to collapse
amazing that two posts, almost two years apart are identical.
samsamuel said:
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , ,
call me Mr suspicious, but compare the wording to your post...
amazing that two posts, almost two years apart are identical.
Click to expand...
Click to collapse
ahaha,,sir i copied that post and post it here because we have the same problem here..,and that post didnt give any idea how can i fix it..,so i tried here at xda dev.forum ..maybe someone can help me.,, i cant find any stock rom for my phone..and also i didnt know what current rom applied to my phone.,
all i just want is boot my phone back to its life.,,please please help me..im trying to fix this phone all day and nothing works..,until now im still searching to make my phone boot..,its allready 12:05am here gotta go to bed now..and i hope someone tommorow can help me thru this.,,THAnks btw for your reply
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
samsamuel said:
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
Click to expand...
Click to collapse
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
---------- Post added at 11:08 PM ---------- Previous post was at 11:03 PM ----------
ph03n!x said:
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
Click to expand...
Click to collapse
If it was a SPL issue then that means it is a CID or a MID issue and if it is that then the Rom would not even start to flash at all no matter if it is via RUU or SD card. If the CID or the MID is wrong it would through a error saying something like "CID mismatch" or "Model I'D mismatch" when trying to flash.
T-Macgnolia said:
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
Click to expand...
Click to collapse
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
miko30 said:
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
Click to expand...
Click to collapse
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
T-Macgnolia said:
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
Click to expand...
Click to collapse
do you have any facebook account sir,,maybe we can contact each other thru facebook..,yeah maybe that should work 3.14 ruu sir..,can you upload it on mediafire sir if its ok to you..and i cant go thru that t mobile screen with red text sir, when i open my phone it just stuck on black screen with a message "software update failed please try again.." and whats up with the vibrating?? my phone keeps vibrating..
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
samsamuel said:
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
Click to expand...
Click to collapse
sir yeah we manage to install a custom rom but the problem now is i think its on the cpu..,is there any way to fix this hardware problem..,
I could use some help, having the problem described earlier. I can't get past the 4color boot loader screen, - for a fraction of a second it goes to the insalling screen then comes back to 4color with "Serial" in the white.
Here is what I have on my HD2: Android 2.3.5 Radio 15.42.50.11U_2.15.50.14
Here is what I have tried to install through sd card: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship.zip (renamed .zip, was .exe) and T-Mobile_HD2_MR_Software_3.14.531.1.zip (renamed .zip, was .exe)
I tried 3 different sd cards; (2) 2 gig cards (1) 4gig cards. I reformated several times before copying and renaming the nbh file.
What next? Thanks
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
Thanks. That makes sense. I can't check for 6 or 7 hours until I get home for the day. I'm using W7, and have never really gotten how to view the real extension on a file, not like the good old DOS days. yes I have a tmous. After requesting the help, I tried the same card in my brother's HD2 that I need to restore as well, and got the same response, so it has to be the card/name not my HD2. I'll post back when I check it out. Thanks again.
samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
I renamed the file, making sure there was only one .nbh extension. Still not working. I tried it with both tmos roms, I reformated the card, I tried it on both phones. Obviously, I have done something wrong with the file, but read and re-read the instructions and I can't find what it is.
Any ideas would be great.