Hi
Just after some input on connecting to a car stereo. My thoughts
1) I have read the guide on creating your own mini usb to 3.5mm jack plug cable and have also seen similar things for sale
2) I have seen on a car forum for the car i own a guide for making a cable connecting 3.5mm jack plug to the AUX on the car stereo (used for the cd changer).
3) I can charger my kaiser through a usb cable in the car.
4) There is obviously a power source on the stereo.
Given the above, would it be possible in theory to have a direct connection between the phone usb and the stereo that would allow the phone to play through the stereo and also charge it at the same time?
I dont want to go through the process of doing it if there is some fundamental reason why it cant be done.
this might be wht your looking for hxxp://cgi.ebay.co.uk/3in1-usb-Adapter-for-HTC-KAISER-P4550-TYTN-II-VARIO-III_W0QQitemZ190232228190QQcmdZViewItem?hash=item190232228190&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Something you might have to research is alternator whine.
I made a lead myself as you described. But as long as the device was charging There would be a buzzing coming from the speakers. This went away when running on battery power and when the device was fully charged.
I also tried a bluetooth device, and again if I tried to use it while it was charging I would get the dreaded buzzing.
I still have not found a solution. FM transmitters have never worked either for me. There is not enough space between channels here.
5manarmy said:
Something you might have to research is alternator whine.
Click to expand...
Click to collapse
You can solve this by installing ground looping isolator if the power source from yr car is not clean
Hi.
I had the same problem, see my solution with the help of others:
http://forum.xda-developers.com/showthread.php?p=2353474
Good luck.
Well I think based on what I have read and the replies on here I am going to give it a go.
I will update on here once completed
I have a bluetooth stereo in my cab and my phone connects to the stereo using the bluetooth, I am also able to use Btmusic and play anything on my phone thru my car stereo its great for the odd file just wish it would do video as well thru bluetooth.
Os
jackleung said:
Of course you could. But keep in mind that your microphone won't work for most usb+3.5mm adapter. It's very troublesome to pick up the phone. I would recommend you to opt for BT route. e.g. Stereo bt headset w/ 3.5 mm adapter like Sony Ds-220 or BT head unit like JVC BT-1
Click to expand...
Click to collapse
The original mic supplied works okay for me with the headphones chopped, but its very echoey even mounted as far from my speakers as possible so would agree with the above.
Ive the same setup in my car. The phone stuff was easy, it was getting the right VAG adapter to fit my cars HU that gave me the most trouble.
I also hardwired in my charging cable to keep it tidier and my cig lighter free, might be worth thinking about.
I have made a start on this. I have wired in the cable from the Car stereo and at the moment this ends with a 3.5mm Jack Plug. I have also bought the YC A200 cable from HTC which allows connection of the 3.5mm jack plug, a wired headset and also mini usb charging. In fact two of the HTC cables were delivered to me (one ordered but 2 delivered and invoiced) so I might use one as a development cable.
So far - music plays through stereo ok, not over impressed with the quality so far but am going to fiddle with the settings. SatNav also plays through the stereo - much easier to hear. I have had an issue this morning when having music playing and satnav running that the GPS signal was being lost. Not sure if this is a problem with running the two things at once or an interference issue from somewhere. I have never had problems with the GPS before. Am going to do a soft reset and try again on the way home tonight.
I was looking at hardwiring the charging cable to tidy things up and free up the lighter socket. I was going to use the 12v feed from the stereo. Is there anything I need to do or be aware of on this?
How does the mic etc work? I know you can use the headset but I would prefer to use the car speakers if possible. We also have a number of old nokia car kits at work which I was thinking of using for the mic. Would the speaker side work if I connected the relevant cables from the headset port on the HTC adaptor to the 3.5mm jack plug connections?
Im just using the mic from the supplied headset, chopped off the cable past the mic/volume slider and mounted it in the car. Call audio comes through the car speakers.
To hardwire the charger in you need step the voltage down from 12v to the needed 5v. I took a live and earth from the back of the stereo, took apart a usb cig charger and soldered the cables into it, put it back together and hid it behind the dash. Then just took a mini usb cable from that up to the 3in1 plugged into the phone.
SRSWOWHD cleaned my sound up considerably using Pocketplayer.
Well, my experiences so far,
Got the HTC YC A200 cable
1) Playing music through car stereo works great
2) GPS works fine most of the time, still not sure what the problem is, mainly voice directions not working properly all the time
3) Charging via the cigarette lighter socket, still got to hard wire the charging
Latest development
Got a Nokia car kit mic, just had to trim the locking lugs off the 2.5mm (or is it 2mm) jack plug. The mic works fine and the caller can hear me ok. The sound comes through the stereo but is not as loud as the music but i can change this slightly by fiddling with the plug, gets louder or quieter but still not the same volume as the music.
Any ideas? Would it be that the HTC adaptor is expecting the htc wired headset?
removing alternator whine / hum
Finally solved the alternator whine / hum over at my place too. Key is to take the power for the charger directly from the power feeding the car stereo. That way both the stereo and charger reference the same ground which eliminated the ground loop and thus the alternator noise.
http://www.jenrathbun.com/phpBB3/viewtopic.php?f=17&t=26&p=76#p76
Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.
+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?
Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)
The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.
http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm
when ever i plug in a standard stereo jack plug into the headset socket
the phone randomly dials the last call made.
anyone come across this? is there a way i can stop it
i need to be able to play music via my cars aux socket. via a stereo jack lead
Ive been pondering this and thought i'd post it here for your general feedback.
the plug for the hearphone/mic headset that comes with the device is a triple pole 3.5mm jack - same thing used by video camcorders into the phono adaptors.
On the back of my car stereo unit ive an Aux in which would be the red/white plugs of this cable for the audio feed. This is generally how i'd plug my phone in to listen to my music.
Now with the 3rd wite (yellow) i was thinking if i used a small PC Mic (3.5mm jack) and get a patch cable made to connect this to a male phono would this work? it'd also give me the ability to hear my phone throughthe car, and a lengthy cable i can hide and place a mic in the car leaving a simple 3.5mm jack to plug into
Hi all, I need a little help getting the Aux output working on my Note 3 (SM-N9005). I have purchased an Aux out cable from eBay (http://www.ebay.co.uk/itm/111486953855). When I plug it into my Note 3 the phone reports that the dock is connected. In Settings/Accessory 'Audio output mode' is selected. However when it's plugged into the Aux in port of my car stereo, the sound still comes out of the phone speaker not the car speakers.
What am I doing wrong?
Anyone? Anything?
I've never tried connecting it as a dock... I just use a 3 quid male-male 3.5mm audio cable between the earphone jack and the car's 3.5mm audio-in and it works perfectly.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
I've tried that and it does work, but the volume is really low so I have to turn it way up, which usually means I get deafened when I change to the radio or CD.
Slugsie said:
I've tried that and it does work, but the volume is really low so I have to turn it way up, which usually means I get deafened when I change to the radio or CD.
Click to expand...
Click to collapse
Did you also raise the volume on the phone itself when the 3.5mm cable is connected and the music is playing?
Volume over headset is a separate setting from the volume over speakers, and can only be changed when a plug is inserted in the earphone jack.
Oddly enough, yes, I do. On my car stereo when I listen to other sources (radio/CD/USB) a reasonably comfortable all round volume is 15-20 (out of 50). With a 3.5mm jack to my phone, and with the phone volume turned all the way up, I pretty much have to be in the high 30s on the volume to get it about the same. That's because the 3.5mm jack on my car stereo is a Line in jack, so needs a line level input which the normal headphone output isn't.