[Q] [HELP] HTC Magic 32A bricked i think... - myTouch 3G, Magic General

hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,

NOT DEVELOPMENT RELATED
iondarie said:
hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,
Click to expand...
Click to collapse
NOT Development related​
Moving to General.
Please be mindful of where you post your inquiries. The Development sub-forum is reserved for developers with contributions ONLY!
Thank you.

Make goldcard and flash again.

Hi
my device screen shown hexagonal on chips,like your device ,stuck on RUU USB,
last time i ask anybody here what i can do..i didn't found ..
nothing we can do as long as we have a root,
if you have a root you can
fastboot oem rebootRUU.
or tell us your
fastboot oem -h ,screen..
Now i can fix my phone by myself. i got JTAG ,and built my own ,
just only JTAG can works,God save my phone..

Man you dont need jtag!!!Dont pay for this situation!Just find an original Signed RUU and flash like nothing happens.Or create goldcard from another android phone.!

yes if
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..

awebagar said:
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..
Click to expand...
Click to collapse
His phone is not MT3G v1.2 or Fender, his phone is common HTC Magic 32A, so he need create goldcard and flash RUU again
His first attempt was wrong cause every official ROM checks CID on phone. If phone's CID is not equal with ROM CID then update will fail. RUU updated hboot and radio and failed at CID-step and locked in RUU-mode.

Related

Semi bricked HTC Magic (Proximus) HELP NEEDED

Hi everybody,
Call me stupid if you like but....
I have a HTC Magic from Belgian telecomservice Proximus.
Some days ago I did the following.
- deleted all files from SD-card
- wrote down following:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP 10000)
CPLD-12
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
- ran the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
- RUU said: cannot find customer-ID
On this point my mobile was stuck on the RUU / USB screen
- I ran RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver
- RUU said: cannot find customer-ID
now my mobile says:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
Now I think (I'm a noob) my mobile is semi-bricked.
I tried to make a Goldcard, but couldnt because I cannot run adb.
I can run fastboot from AndroidSDK/tools
adb doesnt find devices.. fastboot finds my device.
Anyone who can help me? I would be really thankfull.
Ouch ouch, looks like its more than semi bricked for now. Since it updated your spl to a perfected one there isn't hacked yet. I'm afraid that the only thing there might save this phone is running another RUU your mobile will accept. You have to find one which got 1.76.0009 or higher cause the S=ON now
If this wont work the only hope will be a spl hack will be released and will be done through fastboot.
But most of all it sounds like the best thing there could happen is that your warranty is still valid and they will replace it for you.
Anyway, don't take my words as 100% cause i'm no expert on this matter!!!
If you dare to try to flash another spl/radio through fastboot look at this: http://forum.xda-developers.com/showthread.php?t=605239
BUT, as your new spl is perfected it will most probably not work and ruin the possibility to use fastboot.
Maybe and just maybe, it will be easier to get a replacement if it's fully bricked and it's impossible to get into fastboot and recovery.
Thanks already for the fast answer.
Let me try your suggestions first.
Warranty will not be provided I assume.
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
radjagios said:
I tried to reflash, I couldn't... Let's jst go to the shop and send it to repair-service.
Thanks for helping Ronni!!
Click to expand...
Click to collapse
Try to wait a little while, like i wrote i'm not an expert on this matter.
Maybe if you're lucky someone will drop by with a solution for it. But to be honest, i wouldn't keep my hopes up
And sorry didn't follow the thread, don't have any links for RUU cause i'm not really sure which you should use.
But if Belgium got the update which include HTC sense, i guess that would be the right one.
I found a solution to my problem.
Here's what did I do.
hxxp://forum.xda-developers.com/showthread.php?t=656798
Got the exact same issue.
Tried the goldcard with the sandisk 2GB, but with an usb adapter. (I read the card should work)
I could do everything in the goldcard tutorial but when inserting the goldcard in the phone nothing happens at boot or when pressing the recovery keys at boot.
It jumps right away to versions screen.
The strange thing is though. Once I inserted the sd card in the phone, I can no longer use it on the PC (please insert media). Which I could do before.
When inserting the sdcard on another magic phone, it's working fine.
Going to get a Kingstong 2GB with sdcard adapter in the mean time and try it in the pc's card reader.
(HTC Magic 32A)
It really sucks Proximus sells android phones you cannot update. What's the use to have open source software then?
I also wander why the RUU update went wrong, once you root the phone is should work no ?
hmmm, I Read on this forum there is no fix for the 1.76.0009
h**p://forum.xda-developers.com/showthread.php?t=548218&page=27
radjagios, can you confirm the goldcard is working for this?
You have any useful info like sappimg version you have put on it?

Help!32A on vodafone 32B

I used the RUU_Sapphire_HTC_Europe_305401.exe to flash my G2 (vodafone,32B), and the phone became a brick,it started only "ruu", then i tried many Offical RUUs,included
RUU_Sapphire_Vodafone_Generic_2.20.151.4_GR_test_signed_NoDriver
RUU_Sapphire_Vodafone_GER_1.91.162.1_DRC92_signed_NoDriver_1.6
RUU_Sapphire_Vodafone_Mobilkom_1.91.177.1_DRC92_signed_NoDriver
RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver
the last one can flash the splash radio and hboot,then stops at system,just like the 305401
now the phone start with
SAPPHIRE PVT 32A SHIP S-on H
HBoot-1.76.0008(SAPP10000)
CPLD-10
RADIO-6.35.08.29
Nov 3 2009,15:56:29
ruu
can anyone help me? thanks a lot...
anyone helps...
cant help myself but am having almost exactly the same problem, fastboot works but everything fails signature check and am unable to boot the phone into the OS and recovery wont load have tried for a month now i reckon in total, i gave up after 2 weeks initially and now have spent a further 2 weeks trying to get it to work, my
have tried flashing via Goldcard but keep getting "Main Version is Older"
phone is showing
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-6.35.10.18
May 8 2009,21:02:32
There exist a special goldcard --"factory reset card"?( or some other name,someone called white card) , i have no guide to build this card. Engineer in HTC factory use the card of this kind to flash the phone. Maybe this would work...
if i can't get it work this week,i would spend some to repair it using JTAG way(flash the nand directly).
there exist gold card and white factory sim card. gold card any one can create now, but this factory white card (its a sim card) i emulated with my clip www.xtc.hk

[Q] please help sapp300 32a touch screen not work

hi dear friends i have a problem with this phone
the phone was working well before i do my stupid move
i try to unlock the phone using the method posted by sr legija, using riff box to repair boot
after repair boot i try to restore with this firmware versions one by one, after its fail repairing boot again
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver.exe
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_NoDriver.exe
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver.exe
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
no one of this can completely flash the phone , radio and in other system frozee and doenst complete the flash
i was searching for completely 2 days and i just found a sappimg.nbh posted in forum , for sapp300 and this image restore coimplete the htc via sd card
but my surprise, after restore with this flash the phone power on and its unlocked , but touch screen dont work
in bootmode says
sapphire unknown 32B ship s-on G
HBOOT-1.33.0006 (sapp*****)
cpld-10
RADIO-2.22.19.261
MAY 27 2009,19:06:41
THE MAIN PROBLEM IS THIS PHONE ITS 32A VERSION CAUSE CPU mt700A
SO I JUST CAN FLASH WITH 32B VERSION BUT I CANT GET THE TOUCH SCREEN WORKING AGAIN
ANY HELP ?
THANKS IN ADVANCE

Fastboot FAILED... (remote: not allowed) problem!!

Hello everyone!
I need help with my phone ASAP. I recently tried to get Ginger Yoshi 1.5 on my phone but I needed to change my Spl and radio to 1.33.2010 and 3.22.20.17. I managed to change them both but that's when everything started going bad. When I changed them my phone went from 32A to 32B, at that moment I thought something had went wrong so I flashed back my Spl to what I think it was the stock Spl 1.33.0013. After that it went back to 32A but the radio remained 3.22.20.17. I havent changed it back or anything because now my phone is kinda bricked. I only have access to fastboot\hboot screen, but when I try to flash something it wont let me saying "FAILED (remote: not allowed)". If I try to update Hboot mode it says "Model ID incorrect! Update Fail!".
I have been searching for a solution but I haven't seen anybody else with my spl and radio combination. I'm starting to give up hope on my phone . I don't know what to do anymore. I need some help.
Yes, I'm a newbie at this. I think this is my third time changing a ROM.
Thanks in advanced for any help and/or advice!
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
OCT 21, 2009, 22:33:27
Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.
nikosdd said:
Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.
Click to expand...
Click to collapse
Hi there! If by that you mean if I can actually boot a ROM then I can't, it stays in the HTC Magic screen. Or if you mean if I can get adb connection with cmd I can't also because it does not recognizes my phone. All I get access to is fastboot and hboot, though it doesn't work either.. I try to flash a new radio, spl or recovery image but it does not works. Maybe I need a new goldcard? Since it says model ID incorrect.
Thanks for your help!
Your phone is MyTouch 3G v1.2 with audiojack 3.5" and it is NOT common 32A. Don't use manuals for Magic 32A.
You flashed wrong combo and it is main problem. May be this manual will help, but i have no guarantee
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
p.s. Megaupload links are dead cause US District Court shutdowned this site)
http://www.4shared.com/zip/hW3I1tfT/MyTouch35RootingFiles.html
http://www.4shared.com/zip/ALht1xbT/unlockr_Sappimg_mt3gv12.html
p.p.s. And you need goldcard. Must have goldcard to flash special sappimg.zip
Tech reasons of solution:
- you have perfected HBoot and can't flash anything by 'fastboot flash' command
- you have wrong radio (combo, cause hboot and radio must be together)
- if you will flash special sappimg.zip you will have 1.33.2010 s-off eng hboot. With this hboot you can flash your stock combo back (and don't forget about custom recovery for mt3g v1.2)
Yes my phone is the Fender LE. I found out that even though they say 32A they're actually 32B as well. What a way to get confused. And as you said, some links are broken because of megaupload no longer existing . I couldn't find the files that I needed. My phone is now fixed running Cyanogenmod 6.1.0 (I gave up trying to flash ginger yoshi, I don't lke the idea of having to change spl and radio).
After I found out what I had to do to fix it I thought that it wasn't so big of a deal, just flash a sappimg file with a diferent Spl and that is it, S-off and an Eng spl.
Though when it said "Model ID incorrect" I had no idea why that happened. I had to open the Hex editor again an re-edit my Sd card's code with the goldcard I had created before. After that everything went back to normal, I flashed CM6 and now my phone is up and running like a charm!
I've seen some other users with the same problem I had, maybe if someine would explain them what they need to do to fix it would be a good idea.
Thanks for explaining! And for the links.
This is what I now have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.xx.xx (I forgot the last 4 numbers )
Running CM6.1.0
Now can not download the Stock rom with root for MT3G 32A 1.2 because all the link are dead. Could you please give a helping hand?
Thank
See if you find the rom in this link.
http://shipped-roms.com/index.php?category=android
Thank you,
but still can't

[Q] Sapp310 32 A Can't exit Ruu mode

I used to rooted and unlocked this phone. And installed a rom. Then I think I installed a wrong HBOOT or a radio and it bricked. I tried to debrick but it didn't work. Then I put the phone aside for a while. Now I want to make it work again. I did a lot stuff on it that I don't remember. Now phone starts in RUU mode.
I'm a noob so I don't know every commands or how these things work so I followed some guides but I've got errors every time. Is my phone bricked totally? Is JTAG necessary? or is there a way to get out from RUU mode and install correct HBOOT and RADIO? or if those correct than what am I doing wrong? This is a My Touch 3G T-mobile. And it says Sapp310 under the battery and there's an A next to barcodes. I don't know if it means 32A or not.
Recently the phone has
------------------------------------
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008 (SAPP31000)
CPLD-13
RADIO-6.35.08.29
Nov 3 2009, 15:56:29
RUU
-------------------------------------
Please help me and guide me to fix this phone. Thank you.

Categories

Resources