Database Users

[Q] [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10]

Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks

hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
yep install the TyphooN_CM7_v3.4.0-magldr.zip instead of the one you did
you cannot use a clk rom on magldr...correction you can but its not as easy to setup

hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
How i do:
1.Instal HSPL 2.08
2.Instal 2.15.50.14,
3.Instal Magldr 1.11 (because with 1.13 i have problem in masstrg mode)
4.Download ClockworkMod 1.2, copy 2 files from folder "to SD" in my SD card
5.Run in CWM, choose instal from sd card/choose zip and choose TyphooN_CM7_v3.4.0-cLK.zip
6. Restart Phone
7. DONE

De4LeR said:
How i do:
1.Instal HSPL 2.08
2.Instal 2.15.50.14,
3.Instal Magldr 1.11 (because with 1.13 i have problem in masstrg mode)
4.Download ClockworkMod 1.2, copy 2 files from folder "to SD" in my SD card
5.Run in CWM, choose instal from sd card/choose zip and choose TyphooN_CM7_v3.4.0-cLK.zip
6. Restart Phone
7. DONE
Click to expand...
Click to collapse
no.
clk is not the same as magldr.
see above for correct directions.

[Q] Can't install MAGLDR113 on my HTC HD2

Hi guys, Im a noob.
When i tried to install the ROMUpdateUtillity, it was smooth on the front part, but when it start installing, it always 0%, and after that, it pop up a error dialog... I followed every instruction in the ROMUpdateUtility. please help me.
I'm using Window 7
Window Mobile Centre 6.1
Thanks.

Go to Xda Hd2 Nand Development and at the top on the thread there will be a toolkit thread. You can search it in Google too. Toolkit is called HD2 Nand Toolkit by Ksubedi. Download the tool. And flash HSPL 2.08. Then flash Task29. Then flash MagLdr through that tool. You can set the size of the partition of MagLdr in center left.
Hit thnkx if this helped.
Sent from my HTC HD2 using XDA App

i guess u didnt change ur hspl ...change it first to 2.08 befor installing magldr

Thank guys, thank you so much

Omg guys, my HD2 can't load into the MAGLDR113 menu, it stuck at the HTC logo start up screen. it can't load into the phone too...

stucking at the htc screen means that theres a clean nand
did you task29? if yes, try to install magldr again..
follow these steps:
install hspl 4 (2.08 HSPL)
install radio 2.15.50.14 rom
Task29 (clean nand)
install magldr
install cwm
goto cwm (AD Recovery @ magldr menu)
flash rom (install zip from sd card - choose zip from sd card)
have fun
if you need to go manually into magldr menu, keep pressing phone end button while booting.
if this is just too much, just try to use a toolkit (like the nand toolkit or mine (click on banner in my signature )
hope it´ll help a bit.

I still can't figure out how to boot into the MGLDR113 menu, i tried reinstall it and try press the end call button many times when booting up. its not working... omg...
Thanks

Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.

kenex91 said:
Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.
Click to expand...
Click to collapse
well dont say idiot about urself ... no one was born knowing how to install android ... ignorant would be the perfect word ...just kidding

aaa... i installed the COREDRIOD into my phone and everything was fine. But when i restart my phone and boot it up, it stuck at the COREDROID logo. i waited for 15min and it still stuck there.
Do i have to wait longer? or i having a problem here?

have you made the necessary CWR partition for this rom?

nope.. how much should i partition them?

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
Mostly it will say so in the ROM Thread, or a Readme file in the file you downloaded.

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....

mutil said:
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....
Click to expand...
Click to collapse
i don't have DAF in the 300MB CoreDroid zip file, but i have it in the MAGLDR113. is that the same? or i have find CoreDroid DAF?, I read the forum of CoreDroid again and again. There is no DAF.exe file to download.
Please help me
Thank you.

is this the DAF? I don't understand them at all...
What is in the required NAND Partition (flash.cfg)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize

in the first page of nand development there is hd2 nand toolkit by ksubedi. i use it. it has many tools. better download it. on left there is mgldr repartition choose 300 MB and at cache part write 5, then connect your phone to pc choose usb flasher....

or use this attached folder.

Its still not working. Still having the same problem.
This are the steps i have done.
-install hspl 4 (2.08 HSPL)
-install radio 2.15.50.14 rom
-Task29 (clean nand)
-install magldr113
-Go to USB FLASHER
-Repartition using Toolkit (300MB, 5mb Cache)
-flash rom (install CoreDroid from SDcard in zip format)
Stuck at the CoreDroid Logo Start up Screen.
Did i miss out anything to be done?
Please help me out.
Thank you.

if you use eu-hd2 this rom and many others need an ext partition in sd card. do you have an ext partition?

need help with rom-install

Needless to say: I'm a noob. Well, I've installed a rom via the newb-tread with magldr about a year ago. Now I'm trying to install a new rom. But, I've updatet magldr from 1.11 to 1.13, and entered the usb flasher mode in the magldr boot menu. The next step was to open the run daf.exe-file or install.exe. But I couldn't fint such a file in any of the two roms I've downloaded. There are some folders with a bunch of different files in them when I unpack the rom I've downloaded.
The rom I want is: [03.SEP.11][MAG/cLK] TyphooN CyanogenMod 7 Nightly v3.6.3 [2.3.5][A2SD][tytung r12b1]
http://forum.xda-developers.com/showthread.php?t=933951
Would be happy if you sent me a message in pm to help me. Sorry for bad english

new roms are not flashed by daf.you just put rom.zip to sd,then make cwm partition (for this rom 5-150-5)
download this:http://api.viglink.com/api/click?fo...ry v3.0.2.5)&jsonp=vglnk_jsonp_13157832492871
unrar,in mgldr choose usb flasher, see usb flasher....usb,then right click on daf,after installation is complete phone will reboot and turn to mgldr menu (giving an error),then in mgldr go to ad recovery-install zip from sd-choose zip from sd-find your rom.zip,after installation is complet reboot.

Nand kernel open failed

Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?

xda_apprentice said:
Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?
Click to expand...
Click to collapse
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.

mskip said:
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.
Click to expand...
Click to collapse
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.

xda_apprentice said:
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.
Click to expand...
Click to collapse
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.

[email protected] said:
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.
Click to expand...
Click to collapse
As the previous user stated you have tried to flash a CLK Rom via the CWM method.
You need to download the correct type (with Dorimanx it will be the Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-MAG.zip version) and flash it via CWM Recovery as you did before.
It should work fine if you do that as everything else you did was correct.
Mark.

HD2 don't boot

Hi,i have a big problem: my HD2 when I install the HSPL 2.08/3.03,then i do a task 29,finally i install clk/magldr don't boot.
it remain at the htc white screen.
How can i do? i try a lot of time,but every time i must reinstall the original rom (1.66) beacause with clk and magldr the HD2 don't boot

For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...

powerofthink said:
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...
Click to expand...
Click to collapse
thanks a lot.
Do you know where i can find the radio? All the links the I find are delete :/

1. Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
2. HD2 Toolkit 4.2.0.1;
HD2 Toolkit 4.2.0.1

I love you with this radio finally my HD2 make the boot

Enjoy with your HTC..