Related
Well is it? Been looking around at a few Rom managers and is seem that "Rom Manager" allows is somehow but it will not work, I dont know where to drop the recovery image.
The reason I am asking this is because I am at work today with no cable and "NEED" (lol) to flash the 1.7 rom that just came out.
Thanks in advance
ANSWER:
Ok so this is how I was able to flash my recovery image without a computer:
Step 1: Download the .img file you want to flash
Step 2: Download Rom Manager (Clockworkmod) from the app market
Step 3: Copy your .img file to sdcard/clockworkmod/download/mirror1.kanged.net/recoveries
(atleast this is where my recovery-cockwork-2.5.0.7-streak.img was being saved to)
Step 4: Rename the most recent .img file to something close just to keep as a backup (ex. recovery-cockwork-2.5.0.7-streak.img to recovery-cockwork-2.5.0.7-streak2.img
Step 5: Rename the downloaded .img file to what the original was (right now it would be recovery-cockwork-2.5.0.7-streak.img)
Step 6: Go into Rom Manager and press Flash ClockworkMod Recovery. it will now flash with it thinks is the latest, the one you just renamed.
Step 7: You are done, reboot and you should have the recovery.img you needed.
I needed to do this because for some reason after flashing to 1.6.1 my recovery no longer allowed me to flash from my SD.. I was away from my computer so I needed to find a way to flash remotely.
ENJOY
dtmcnamara said:
Well is it? Been looking around at a few Rom managers and is seem that "Rom Manager" allows is somehow but it will not work, I dont know where to drop the recovery image.
The reason I am asking this is because I am at work today with no cable and "NEED" (lol) to flash the 1.7 rom that just came out.
Thanks in advance
Click to expand...
Click to collapse
Not Android Development
Please Post in the Correct Forums
Moving to General
Isn't that what ClockworkMod does?
I don't see why you couldn't download the ROM onto the SD card via the Streak (or another phone).
Of course, it needs to be in the correct format to be flashed this way.
This is how I usually apply StreakDroid.
Of course, you need to have ClockworkMod already installed to do this.
answered in post one....enjoy
This should be made into a sticky.
Sent from the phone killer of all phone's, Dell Streak!
Well I tried this by installing the latest ROM manager (v3.0.7) then I copied and renamed the streakdroid as instructed.
However, if I run ROM manager on the streak and select Reboot into Recovery, the streak just re-boots back into Android (DJ Steve 1.7)
Did I do something wrong?
Cheers
Ody
You still need to hold the volume up n down buttons when the device restarts. This just allows you to get the correct recovery.img file on the phone. I dont think there is a manager that actually reboots in recovery mode yet for the streak
Sent from my Dell Streak using XDA App
I have a broken pdmi connector so I'm hoping I can use this process. When I Flash Clockworkmod Recovery it downloads a file in the sdcard/clockworkmod/download folder but it isn't recovery-clockwork-2.5.0.7-streak.img. It also doesn't have any subfolders within sdcard/clockworkmod/download. Any clue why this is? Do I need an old rom manager apk?
netpig said:
I have a broken pdmi connector so I'm hoping I can use this process. When I Flash Clockworkmod Recovery it downloads a file in the sdcard/clockworkmod/download folder but it isn't recovery-clockwork-2.5.0.7-streak.img. It also doesn't have any subfolders within sdcard/clockworkmod/download. Any clue why this is? Do I need an old rom manager apk?
Click to expand...
Click to collapse
I was able to use ROM manager 4.2.0.1. The newest version did not work correctly for me.
netpig said:
I was able to use ROM manager 4.2.0.1. The newest version did not work correctly for me.
Click to expand...
Click to collapse
Does rom manager really work for your streak ?
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
for the love of God can some body help me?
i just dont know what to do, this is the oem rom update and why the unit is not able to find the update in the sd card?
This post isn't about development, you posted the same thing in multiple places, and you can't install the AT&T update with clockwork, you need the stock recovery.
marvin02 said:
this post isn't about development, you posted the same thing in multiple places, and you can't install the at&t update with clockwork, you need the stock recovery.
Click to expand...
Click to collapse
yes thanks
where can i find it and how can i flash it?
elmanortega said:
yes thanks
where can i find it and how can i flash it?
Click to expand...
Click to collapse
+1
Please god, Ive been stuck on this **** for 14 hours now. SOLUTION PLEASE!
I've experience rooting/roming over 50 phones, and this is getting irritating!
CWM doesnt flash .pkg's, and I'm coming in way to late in the process to understand this QueTip program or w-e. A simple stock recovery flash tutorial n link would be amazing.
this will happen too when you flash it over 2.2 already but in your case your on 16 ryt?i would suggest google search for the stock 1.6 6601 recovery image and flash it and then flash clockwork and then apply the update.
try to look here.
http://forum.xda-developers.com/showthread.php?t=778397
try here also.
http://android.modaco.com/content/d...uide-to-upgrading-and-downgrading-the-streak/
whats your baseband prior to this update?
I suggest that you use streakdroid recovery to make a nandroid backup before you revert to the stock recovery,
Download stock recovery from here. Make sure it is on your computer in the same folder as fastboot.exe
Excerpted from this streakdroid guide:
Shut down your Streak, then hold down the camera button (all the way) as you turn it back on.
The screen should turn white; press ‘Fastboot’ in the top right hand of the screen.
Plug in the USB cable – the Streak should now display ‘FASTBOOT_MODE’ at the bottom of the screen.
Open a command window and use ‘cd’ to change to the same directory as qdltool.
Run: fastboot -i 0x413c flash recovery recovery.img
Run: fastboot -i 0x413c reboot
Either rename the file you downloaded to recovery.img or change the name of the file to flash in step 5 to match the file downloaded.
Boot into recovery and you should now have a stock recovery.
You can boot your phone and try downloading and installing the OTA upgrade or you can place the upgrade file on your SD card and name it upgrade.pkg and try to install it using the stock recovery.
I suggest that you use streakdroid recovery to make a nandroid backup before you revert to the stock recovery.
Make sure that any ROM you try to install on your phone is appropriate for your hardware and carrier.
I personally was on the 318 build of 2.2... Downgraded to O2 2.1, then to O2 1.6, then to AT&T 1.6 with the BB downgrade... then upgrade to AT&T 340 2.2, its not that hard... get to stock AT&T 1.6 and leave the 340 "update.pkg" in the root of the SD card.
Instructions to get to AT&T 1.6 here > http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4
marvin02 said:
I suggest that you use streakdroid recovery to make a nandroid backup before you revert to the stock recovery,
Download stock recovery from here. Make sure it is on your computer in the same folder as fastboot.exe
Excerpted from this streakdroid guide:
Shut down your Streak, then hold down the camera button (all the way) as you turn it back on.
The screen should turn white; press ‘Fastboot’ in the top right hand of the screen.
Plug in the USB cable – the Streak should now display ‘FASTBOOT_MODE’ at the bottom of the screen.
Open a command window and use ‘cd’ to change to the same directory as qdltool.
Run: fastboot -i 0x413c flash recovery recovery.img
Run: fastboot -i 0x413c reboot
Either rename the file you downloaded to recovery.img or change the name of the file to flash in step 5 to match the file downloaded.
Boot into recovery and you should now have a stock recovery.
You can boot your phone and try downloading and installing the OTA upgrade or you can place the upgrade file on your SD card and name it upgrade.pkg and try to install it using the stock recovery.
I suggest that you use streakdroid recovery to make a nandroid backup before you revert to the stock recovery.
Make sure that any ROM you try to install on your phone is appropriate for your hardware and carrier.
Click to expand...
Click to collapse
I don't have a fastboot option, and am unfamiliar with QDLtool? Can I pick up on these steps even with CWR already installed?
here are my videos of my device turning on and going into clockwork etc
http://www.youtube.com/watch?v=u0wSH64PlsM
http://www.youtube.com/watch?v=zMiRGekzT_I&feature=mfu_in_order&list=UL
Truaim said:
I don't have a fastboot option, and am unfamiliar with QDLtool? Can I pick up on these steps even with CWR already installed?
Click to expand...
Click to collapse
If you are not on at&t's 1.6 than this is your only option. Also your only way to go back to the 1.6 is using essentially same steps as above. So just make sure fastboot is set up and follow the steps listed above. It will work regardless of os you are running now. I just did it and I was on dj steve's 1.8. On a side note how is the upgrade working for you?(those that installed it)
dacho said:
If you are not on at&t's 1.6 than this is your only option. Also your only way to go back to the 1.6 is using essentially same steps as above. So just make sure fastboot is set up and follow the steps listed above. It will work regardless of os you are running now. I just did it and I was on dj steve's 1.8. On a side note how is the upgrade working for you?(those that installed it)
Click to expand...
Click to collapse
hi do you have a chance to help me out with this?
how do you install universal androot? it only says install and run it
dowloading to my pc and click it doesnt work, copying to root of the sd card and trying to installed with clock work doesnt work
software upgrade via update.pkg on sd card doesnt work
im just thinking that im just plain stupid
is there a video tutorial?
is there some one that can help me i will pay im just tired.
You need fastboot. Plain and simple.
sent from my re-engineered dInc
Hellzya said:
You need fastboot. Plain and simple.
sent from my re-engineered dInc
Click to expand...
Click to collapse
i have fastboot
Yeah my installation came up with an error and it would not boot after it was applied so previously posted stock recovery does not work. So what you have to do is follow the steps to go back to stock at&t 1.6 rom. Here are the directions http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4
I am in a process of doing this now so i'll keep you posted. However, once you do the downgrade from the link above you should be able to just install latest at&t rom without any problems. Hope that helps.
dacho said:
Yeah my installation came up with an error and it would not boot after it was applied so previously posted stock recovery does not work. So what you have to do is follow the steps to go back to stock at&t 1.6 rom. Here are the directions http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4
I am in a process of doing this now so i'll keep you posted. However, once you do the downgrade from the link above you should be able to just install latest at&t rom without any problems. Hope that helps.
Click to expand...
Click to collapse
thanks ok first how do you install universallandroot?
elmanortega said:
thanks ok first how do you install universallandroot?
Click to expand...
Click to collapse
it should be in the market. I used to use SuperOneClick it should work for 2.2 and 1.6. just google the SuperOneClick.exe and you run this from the computer not the phone. universalandroot you run from the phone.
http://forum.xda-developers.com/showthread.php?t=927379
I read the link above and want to try to flash this rom to my GT540, but i got a few questions after reading.
1.Do I need to install the fastboot mode before flashing the phone? or rooting the phone?
2.Can I recovery back my phone to the official 2.1 rom after I flashed my phone to any custom rom?
3.Can I remove my SD card from my phone after flashing it to 2.3.3?
I am really a newbie on flashing android phone, hope someone can help me
1.yup u need a fastboot rom to update to 2.3.3.
2.u loose warranty...wen u flash custom roms...and sm ppl have tried getting back to tha official rom,just search tha forum.
3.does this actually needs an ans,guess u need to explain this a bit more....
Cheers mate!
Sent from my GT540 using XDA Premium App
sanmit said:
1.yup u need a fastboot rom to update to 2.3.3.
2.u loose warranty...wen u flash custom roms...and sm ppl have tried getting back to tha official rom,just search tha forum.
3.does this actually needs an ans,guess u need to explain this a bit more....
Cheers mate!
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
1. I am using the official 2.1 now, how can i flash the fastboot rom to my phone?
2.because i am worrying about the missing function and the performance of the phone, so I want to know whether it can back to 2.1 or not.
3.just using that 2.3.3 and without any changes(I think it's not necessary to use Apps2SD anymore, right?) I known that the SD card cannot be removed after the Apps2SD installed
anyway, thanks for your help
benleung said:
http://forum.xda-developers.com/showthread.php?t=927379
I read the link above and want to try to flash this rom to my GT540, but i got a few questions after reading.
1.Do I need to install the fastboot mode before flashing the phone? or rooting the phone?
2.Can I recovery back my phone to the official 2.1 rom after I flashed my phone to any custom rom?
3.Can I remove my SD card from my phone after flashing it to 2.3.3?
I am really a newbie on flashing android phone, hope someone can help me
Click to expand...
Click to collapse
1. yes
2. only if you have version 2.1 by Quarx (install in fastmode too)
3. yes you can remove your sd card after flashing to 2.3.3 apps will go back to work
lavero.burgos said:
1. yes
2. only if you have version 2.1 by Quarx (install in fastmode too)
3. yes you can remove your sd card after flashing to 2.3.3 apps will go back to work
Click to expand...
Click to collapse
1. root is a must?
2. can i backup the original one and restore it back afterwards? or using the V20a kdz?
i doo next. first flash with europe open 2.1+fastboot. then add clockwork and root phone. afther that i do a backeup of rom. now i can install-restore any rom i want and i can alwaus back to mu 2.1 open
miksontije said:
i doo next. first flash with europe open 2.1+fastboot. then add clockwork and root phone. afther that i do a backeup of rom. now i can install-restore any rom i want and i can alwaus back to mu 2.1 open
Click to expand...
Click to collapse
what is clockwork?
and how to backup and restore?
clockwork is little software that you flash afther flash new fw with fastboot. you can backeup,restore,format,instal new rom...with clockwork.
benleung said:
1. root is a must?
2. can i backup the original one and restore it back afterwards? or using the V20a kdz?
Click to expand...
Click to collapse
root is needed for applications only
no you cant backup your V20a ROM as i said clockwork mode is needed for backup , restore and more so you can only use it wih 2.1 Quarx version, 2.2 , 2.3
one more question.
After flashed to 2.3.3 , can i go to emergency mode and flash kdz?
benleung said:
one more question.
After flashed to 2.3.3 , can i go to emergency mode and flash kdz?
Click to expand...
Click to collapse
you can flash 2.1 europe+fastboot version so then you can flash the clockworkmod and do the backups of the 2.1 version...
Euro+fastboot:
http://www.mediafire.com/?96nu9lb6afx22a7
Clockworkmod:
-Try first with v3.0.1.3
http://www.mediafire.com/?7xb4q35kwq1iutx
-If it doesnt work then flash this version 2.5.1.8
http://www.mediafire.com/?sax544hf3cye3gx
this is the order for flash upgrades:
1.6
2.1 eclair without fastboot (in this case your V20A)
2.1 eclair with fastboot (europe version) (A MUST FOR FLASH NEXT VERSIONS 2.2+)
2.2 froyo
2.3 gingerbread
* i think here is more risk of brick you phone going back to 2.1 version so do it AT YOU OWN RISK
* for more ROMS , APPS and so you can use the link located in my signature...
lavero.burgos said:
you can flash 2.1 europe+fastboot version so then you can flash the clockworkmod and do the backups of the 2.1 version...
Euro+fastboot:
http://www.mediafire.com/?96nu9lb6afx22a7
Clockworkmod:
-Try first with v3.0.1.3
http://www.mediafire.com/?7xb4q35kwq1iutx
-If it doesnt work then flash this version 2.5.1.8
http://www.mediafire.com/?sax544hf3cye3gx
this is the order for flash upgrades:
1.6
2.1 eclair without fastboot (in this case your V20A)
2.1 eclair with fastboot (europe version) (A MUST FOR FLASH NEXT VERSIONS 2.2+)
2.2 froyo
2.3 gingerbread
* i think here is more risk of brick you phone going back to 2.1 version so do it AT YOU OWN RISK
* for more ROMS , APPS and so you can use the link located in my signature...
Click to expand...
Click to collapse
that's mean i can't upgrade in the following orders?
1. official 2.1(now)
2. 2.1 with fastboot
3. 2.3.3 (CM7)
can i do that?
benleung said:
that's mean i can't upgrade in the following orders?
1. official 2.1(now)
2. 2.1 with fastboot
3. 2.3.3 (CM7)
can i do that?
Click to expand...
Click to collapse
yes you can
2.1 to 2.2 or
2.1 to 2.3
once you have clockworkmod you can flash any ROM you want by recovery or by fastboot depending of wich version you download. though recovery mode is safer.
lavero.burgos said:
yes you can
2.1 to 2.2 or
2.1 to 2.3
once you have clockworkmod you can flash any ROM you want by recovery or by fastboot depending of wich version you download. though recovery mode is safer.
Click to expand...
Click to collapse
use the KDZ_FW_UPD.exe to flash my phone to 2.1 with fastboot, right?
if I don't need to backup the firmware,then i can flash to 2.3.3(CM7) directly with the 2.1 with fastboot?
any detail tutorial for me to flash to 2.3.3?
I afraid i will do some wrong irreversible things
i downloaded the v1.6 of CM7, why there's no boot.img? how can i flash that?
I have try to flash the Europe 2.1 + Fastboot(using the KDZ_FW_UPD_EN.exe)
but I can't flash it.
error msg like this:
[R&D Test Tools Log File]
12:59:49 : Launching SW update
12:59:49 : Unpacking KDZ
12:59:51 : KDZ file extraced
12:59:52 : Files were extracted.
12:59:52 : LGMobileDL Load.
12:59:52 : Port = 3
12:59:52 : Connecting to phone
12:59:55 : PHONE WAS NOT FOUND!
12:59:57 : ===FINISHED===
thanks for helping from all you guys.
I have upgraded my phone to CM7 1.5
if I really want to go back to use the official 2.1 firmware, what can I do?
Because i still can using the volume down+PowerOn to go to Download Mode
if I flash the V20a kdz in the download mode, what will be happened?
benleung said:
if I really want to go back to use the official 2.1 firmware, what can I do?
Because i still can using the volume down+PowerOn to go to Download Mode
if I flash the V20a kdz in the download mode, what will be happened?
Click to expand...
Click to collapse
that is not safe at all. if you want to go back to 2.1 then you should go back to a custom 2.1 ROM by recovery from clockworkmod or by fastboot.
Take a look of this 2.1 version is the one im using
http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D217235
The one i use the the 5th version: Advance lite edition
Here is the link of my mirror
http://www.mediafire.com/?q6hnk02k1whzrvq
Any question pm me better
benleung said:
if I really want to go back to use the official 2.1 firmware, what can I do?
Because i still can using the volume down+PowerOn to go to Download Mode
if I flash the V20a kdz in the download mode, what will be happened?
Click to expand...
Click to collapse
If you want to go back to 2.1, I recommend using Black Quarx ROM. It's as safe as SwiftDroid and OpenSwift.
if i want to upgrade my phone to CM7 1.9
can I upgrade it without wipe the user data?
the version 2.0 seems only a beta version, i don't want to upgrade to it right now.
Hi people,
Got my dell streak today and i already cannot use it due to bad flashing I guess. I had v347 unlocked version and tried to flash 351 by using the sd card method -->renaming the 351 pkg to update.pkg. The installation process went ok but after the phone reboots, I am stuck at the Dell Logo for more than 15min.
Tried a factory reset but to avail. Can anyone please help me...I can't believe I might have bricked the D.Streak in less than 24hrs!! Help!!!!!
Edit : I think I did a dumb thing....my streak is dead now...won't even start....I use fastboot and flash the img and mbn files in the 351 section (http://mirror2.streakdroid.com/manii/351/) and now the phone won't even start. No response...bricked...I've read that there is an internal storage in the phone, will it be possible for someone to back up their storage and if I disassemble my streak and copy the contents, will this unbricked my phone?
351 requires the 351 Recovery File
you will need to flash the 351 recovery file in order to let the upgrade package work.
http://mirror2.streakdroid.com/manii/351/recovery.img
Thanks for the tips...I've already tried it using fastboot but I am still stuck on the Dell Logo. Any other suggestions?
leinert1 said:
you will need to flash the 351 recovery file in order to let the upgrade package work.
http://mirror2.streakdroid.com/manii/351/recovery.img
Click to expand...
Click to collapse
I didn't. The 2 times the 351 update worked on my phone was when I copied it to the SD card and used a file explorer to run the package and update. The 1 time I flashed the 351 recovery is the time my phone was bricked.
Do yourself a favor and copy the 351 update to the sd card and update from there.
Final5k said:
Thanks for the tips...I've already tried it using fastboot but I am still stuck on the Dell Logo. Any other suggestions?
Click to expand...
Click to collapse
Yeah, call dell or whoever you got it from and request a new phone due to thir update breaking your phone. That's what I had to do after QDL tool and nothing else worked.
Final5k said:
Thanks for the tips...I've already tried it using fastboot but I am still stuck on the Dell Logo. Any other suggestions?
Click to expand...
Click to collapse
i had the same issue, but i fixed it using an older QDL tool which fixes boot imag, once you get the boot image fix, try to load using the newwer qdl tool to 318 rom from there try to upgrade to 351 rom. if you need any help let me know. i can help you.
any chance you have a link about the thread? thanks!!
fastcar22 said:
i had the same issue, but i fixed it using an older QDL tool which fixes boot imag, once you get the boot image fix, try to load using the newwer qdl tool to 318 rom from there try to upgrade to 351 rom. if you need any help let me know. i can help you.
Click to expand...
Click to collapse
Newer QDL? What version(s) do you have? I've ran it many times and the process itself is always a success but I could never pass the dell logo.
I had the same issue and just went to streakdroid 1.9 any luck you might have let me know.
My first 4 flashes stuck at dell logo. The 5th time was successful
Sent from my Dell Streak using XDA App
Final5k said:
any chance you have a link about the thread? thanks!!
Click to expand...
Click to collapse
http://streakdroid.com/?page_id=15&category=2
in this link there are two versions of QDL tools one which is around 40 mb(StreakFlash) and larger one(repairtool) which is around 190 mb. i initially used the smaller qdl tool to get the boot image fixed and later used the newer one to load 318 rom on to it. then i installed the 351 rom.
i details can be followed from this thread
http://forum.xda-developers.com/showthread.php?t=982906&page=2
in the middle of page 2 he fixes the issue saying "Eureka" and explains how he did it. there is PDF you can follow too which is i one of the links he provided.
Hope this helps. let me know if you have any issues.
Had same issue...
Flashed the 351 amss and dsp1
then flashed streakmod recovery
Then flashes 351 zip
After install complete I pulled battery in streakmod and then put it back in.. then it worked.
There is an issue with the 347 stock units. After flash or upgrade package the sd card read dies until you battery pull. You don't do a battery pull it will never work
Sent from my Dell Streak
Krad said:
Had same issue...
Flashed the 351 amss and dsp1
then flashed streakmod recovery
Then flashes 351 zip
After install complete I pulled battery in streakmod and then put it back in.. then it worked.
There is an issue with the 347 stock units. After flash or upgrade package the sd card read dies until you battery pull. You don't do a battery pull it will never work
Sent from my Dell Streak
Click to expand...
Click to collapse
where are the 351 files? only thing i found was the update.pkg
antnee said:
where are the 351 files? only thing i found was the update.pkg
Click to expand...
Click to collapse
http://mirror2.streakdroid.com/manii/351/
Where do I fine the 351 update.pkg?
Krad said:
Had same issue...
Flashed the 351 amss and dsp1
then flashed streakmod recovery
Then flashes 351 zip
After install complete I pulled battery in streakmod and then put it back in.. then it worked.
Click to expand...
Click to collapse
Do you also have a 347 stock Streak?
Flashed the amss and dsp1, but when trying to flash in streakmod recovery, I am getting these errors:
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip (bad)
Installation aborted.
What went wrong? Any ideas?
borijess said:
Where do I fine the 351 update.pkg?
Click to expand...
Click to collapse
thank manii for the hosting the files: 351 update pkg
Final5k said:
Do you also have a 347 stock Streak?
Flashed the amss and dsp1, but when trying to flash in streakmod recovery, I am getting these errors:
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip (bad)
Installation aborted.
What went wrong? Any ideas?
Click to expand...
Click to collapse
why you trying to flash streakmod recovery as an update.zip?
get the streakmod recovery file and flash it with fastboot
Code:
fastboot -i 0x413c flash recovery streakmod_recovery_file_name.img
replace "streakmod_recovery_file_name.img" with whatever you have the recovery named as. (could be recovery.img or whatever you renamed it to) and make sure your in the correct directory in your command prompt/terminal
Hey good news...finally being able to flash to 351-345-318 using only the update.zip found at http://mirror2.streakdroid.com/manii/
Streak fully restarts and is fully functional....But as soon as I try to use a recovery.img to update to an official pkg from Dell. My Streak just froze at the logo screen.
My question is what is the difference between the update.zip at streakdroid's website and the official pkg? Why I cannot install any official pkg while the update.zip works? Any ideas anyone?
I think I did a dumb thing....my streak is dead now...won't even start....I use fastboot and flash the img and mbn files in the 351 section (http://mirror2.streakdroid.com/manii/351/) and now the phone won't even start. No response...bricked...I've read that there is an internal storage in the phone, will it be possible for someone to back up their storage and if I disassemble my streak and copy the contents, will this unbricked my phone?
Final5k said:
I think I did a dumb thing....my streak is dead now...won't even start....I use fastboot and flash the img and mbn files in the 351 section (http://mirror2.streakdroid.com/manii/351/) and now the phone won't even start. No response...bricked...I've read that there is an internal storage in the phone, will it be possible for someone to back up their storage and if I disassemble my streak and copy the contents, will this unbricked my phone?
Click to expand...
Click to collapse
try this, first remove the battery and put it back. now holding volume up button power up the phone, even though its in blank screen connect it to the computer after 5 seconds, see if windows finds a device and tries to install a driver. if you can see this then your phone is not bricked. you can still try to recover it.
windows would not recognize it....I can't even charge the battery when I plug into the charger...no response. This happens when I flashed the files DT.img,boot.img,osbl.mb & so on, which are found in the link I wrote above.
For those who want the stock rom i will live a link to it and a guide how to install it.
It has the MAY update so those who are stuck at the februray update can fix it.
Note: This process will erase all your data, i recommend do a backup and the phone must be unlocked in order to flash the rom.
Link to Stock Rom here
Guide
After downloading the file go to the adb fastboot folder (that you probably already have) and extract the zip to it.
Put your original cable in a usb 2.0 port and connect to the phone and enter fastboot.
After that just click the flash_stock_pie_MI_A2.bat file and wait until it´s done. It will automatcally reboot
Have a good flashing
afonso14401 said:
For those who want the stock rom i will live a link to it and a guide how to install it.
It has the MAY update so those who are stuck at the februray update can fix it.
Note: This process will erase all your data, i recommend do a backup and the phone must be unlocked in order to flash the rom.
Link to Stock Rom here
Guide
After downloading the file go to the adb fastboot folder (that you probably already have) and extract the zip to it.
Put your original cable in a usb 2.0 port and connect to the phone and enter fastboot.
After that just click the flash_stock_pie_MI_A2.bat file and wait until it´s done. It will automatcally reboot
Have a good flashing
Click to expand...
Click to collapse
Thanks ?
Nuraiman95 said:
Thanks ?
Click to expand...
Click to collapse
You Welcome
Can I flash this if I´m on a custom ROM?