[HELP] Moving from Lite'ning To Miui Galnet - Galaxy S II General

Ok, so I inatalled lite'ning v6.1 and it root my phone 2.
Now I want to move to MIUI Galnet 1.9.9 for SGS2.
can i ignore the part when i need to root my device and install the rom over the lite'ning rom?
and if not, how should i do that?
tnks ;]

Perperz said:
Ok, so I inatalled lite'ning v6.1 and it root my phone 2.
Now I want to move to MIUI Galnet 1.9.9 for SGS2.
can i ignore the part when i need to root my device and install the rom over the lite'ning rom?
and if not, how should i do that?
tnks ;]
Click to expand...
Click to collapse
Probably but you need to read the instructions for the rom you install .
jje

if you have root then you most probably have cwm recovery. go there and just flash the galnet over litening

Yep just make sure you factory reset, wipe data/cache etc (note, make sure to back up apps, SMS etc, as they will be wiped)

you will need to format /system, and preferably /sdcard also. This is not optional.

fyre31 said:
if you have root then you most probably have cwm recovery. go there and just flash the galnet over litening
Click to expand...
Click to collapse
OK, I searched a little bit in the web and i found up that the lite'ning comes with a cwm, root, and build recovery mode. so all i got to do is to wipe and instal.
thanks for your help guys ; ]

Perperz said:
i don't know if i have cwm.
does it matters if i'll install it again?
so what you are saying is to skip the part of the root and install the rom over lite'ning yes?
Click to expand...
Click to collapse
yep. just turn off your phone and press volume up+home+power buttons to boot into cwm recovery. from there you can wipe /data, format /system then flash galnet miui update .zip
you don't have to install cwm afaik litening has it already

MIUI ROM installed sucssesfuly

m2smoe said:
you will need to format /system, and preferably /sdcard also. This is not optional.
Click to expand...
Click to collapse
Where did you get the kernal?

Related

[Q] huawei ideos x5 oxygen bootloop

hey, i want to upgrade my ideos x5 from android 2.2 to oxygen 2.3.2 but all i get a bootloop. Solutions?
Have you tried wiping data and dalvik? Try do re-download the ROM, if not, download the stock ROM again (I suggest B138 or B163) and redo the flash.
You can download the stock ROMs and Oxygen HERE if you want. Be sure not to flash any ROMs intended for Ideos X5PRO if you have the normal Ideos. Check under the battery!
and when i installed oxygen and started to install 2.2 froyo back i had to push the sd card deeper that it would work and now i'm back to 2.2 and sd card works like a charm :S it's a 8gb sdhc thanks for the stock roms link btw and i will try to install oxygen again later if someone could make me an step by step manual
I think i will backup my froy to internal sd card just in case.
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
naamakala12345 said:
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
Click to expand...
Click to collapse
Are you using 5.0.2.6 recovery? Whipe data as well. Sometimes you need to flash the rom twice.
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
naamakala12345 said:
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
Click to expand...
Click to collapse
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Try out Version : V100R001C00B528G001
--------http://forum.xda-developers.com/showthread.php?t=1369296
~02.03.2012~ 【U8800】 2.3 Official Update 【Latest】
--------http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
I'm gonna try the recovery out and let you know
cokratex said:
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Click to expand...
Click to collapse
it worked thanks!!

instal custom rom problem..

I've tried all types of flashing and so, yet I get same black screen after rebooting my phone
not sure if any of my files are wrong, yet I don't think so
I've tried all I can think of, all custom roms and stuff, but no result
I can get to root my phone, install bootstraper then bootmenu, wiped all data and cache but while installing the mod, it loads the installation and after last reboot I get a blank screen with no options to get back in bootmenu or recovery
it's rather my fault or not, but I can't install it, not even with your fast help from post above
any tips left?
cosmy032 said:
I've tried all types of flashing and so, yet I get same black screen after rebooting my phone
not sure if any of my files are wrong, yet I don't think so
I've tried all I can think of, all custom roms and stuff, but no result
I can get to root my phone, install bootstraper then bootmenu, wiped all data and cache but while installing the mod, it loads the installation and after last reboot I get a blank screen with no options to get back in bootmenu or recovery
it's rather my fault or not, but I can't install it, not even with your fast help from post above
any tips left?
Click to expand...
Click to collapse
Revert to stock and start over. dont panic.
I'm to stock now...but I can instal custom rom..
cosmy032 said:
I'm to stock now...but I can instal custom rom..
Click to expand...
Click to collapse
What stock do you have? froyo or gingerbread one? and what rom do you want install?
Because if you have Gingerbread base you cannot install miui or cm for froyo kernel..
but you have a Cm gb kernel based..
sorry for my English
I have Gingerbread (2.3.4) and I want to instal CM7 (http://temp.anonymouz.eu/cm72-111215.1631-NIGHTLY-Milestone2-GB-v1.3.zip) or else...but I cannot instal anything..the screen remains black after apply update.zip.. and to startup phone again only after I flash SBF...
Sorry for my English..but i really need help
you have to downgrade your kernel.
just folow instructions in this topic:
http://forum.xda-developers.com/showthread.php?t=1497263
try this!
cosmy032 said:
I have Gingerbread (2.3.4) and I want to instal cm72-111215.1631-NIGHTLY-Milestone2-GB-v1.3.zip or else...but I cannot instal anything..the screen remains black after apply update.zip.. and to startup phone again only after I flash SBF...
Click to expand...
Click to collapse
There's a sbf-fix for that issue on the CM7 thread, for GB kernel you need to apply update.zip, wipe data/cache/dalvik, reboot and you get a blank screen, then you flash the sbf-fix via RSDLite and now you can boot
You can also try CM9 which is based on European GB
wow it works, thank you all for all :X

[Q] Cant Install Hyperion

Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
copied from my previous post
vangeodee said:
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
Click to expand...
Click to collapse
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
9W2BOL said:
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1465800
go dig in that thread, you should find it eventually. also you need to know how to use Odin flasher, but that's already included in the guide.
9W2BOL said:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
Click to expand...
Click to collapse
you may immediately flash to DXLF1. just go to download mode without doing anything. Like I said, flashing stock roms is as good as getting your phone right from the factory.
after flashing to DXLF1 you may retry flashing Hyperion. if that doesn't work, then refer to my previous post on what I did.
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
you should wipe data wipe cache wipe dalvik cache as it can cause bootloop then try to install it again and for flashing rom you do not need root access .
press thank if I helped you

[Q] Motorola Defy+ MB526 CM installation doubts

Hi! I have some doubts to install custom ROM on Motorola Defy+:
When I install CM on Galaxy Note I directly download from CM website, but when go to look for Defy+ I found only the Defy (not +) and the most newest version is 7, instead 9, 10.1 and 10.2 that I can look searching here in XDA. What is the reason of this difference?
Exist any method that if I not like keep the CM can go back to my Defy+ original ROM and unrooted?
Actually the Defy+ have Android 2.3.5 with the operator ROM.
Thanks for your help!
DroidAR said:
Hi! I have some doubts to install custom ROM on Motorola Defy+:
When I install CM on Galaxy Note I directly download from CM website, but when go to look for Defy+ I found only the Defy (not +) and the most newest version is 7, instead 9, 10.1 and 10.2 that I can look searching here in XDA. What is the reason of this difference?
Exist any method that if I not like keep the CM can go back to my Defy+ original ROM and unrooted?
Actually the Defy+ have Android 2.3.5 with the operator ROM.
Thanks for your help!
Click to expand...
Click to collapse
The Defy/Defy+ has no official support from CM after CM7.2. Quarx2k maintains unofficial and highly stable ROMs for the device, despite its limitation of locked bootloader.
Root with framaroot, then install the 2ndinit app. Open the app, and press install 2ndinit bootmenu. Then reboot, go to recovery (press volume down when blue LED lights up) and take a nandroid backup. It is possible to go back to stock via flashing SBF using RSDLite.
hotdog125 said:
Root with framaroot, then install the 2ndinit app. Open the app, and press install 2ndinit bootmenu. Then reboot, go to recovery (press volume down when blue LED lights up) and take a nandroid backup. It is possible to go back to stock via flashing SBF using RSDLite.
Click to expand...
Click to collapse
Thanks for the answer and explanation! I try do soon. Thanks. When I make the nandroid backup and make a backup of actual ROM (operator ROM) but rooted, right?
DroidAR said:
Thanks for the answer and explanation! I try do soon. Thanks. When I make the nandroid backup and make a backup of actual ROM (operator ROM) but rooted, right?
Click to expand...
Click to collapse
Yes. You can unroot later.
hotdog125 said:
Yes. You can unroot later.
Click to expand...
Click to collapse
Thanks! I try found all the links to the programs that you recommend me and try
hotdog125 said:
Yes. You can unroot later.
Click to expand...
Click to collapse
I can do some of the steps but I have a problem:
> Already root with Framaroot: OK
> Already install 2ndinit + Superuser: OK
> Nandroid backup: OK
> In Android Bootmenu I select + Recovery --> Custom Recovery, OK until here.
> I do the wipes, OK also
When I try install the ZIP of CM 10.2 ( cm-10.2-20130801-NIGHTLY-mb526.zip ) the process abort and show me the message:
"(status 0) Installation aborted"
I read that for this error message, and the first time, I need install using DUAL RECOVERY (TWRP). I donwload the ZIP of this DUAL RECOVERY (CWM_TWRP_v3-signed.zip) but now start the problem, after install OK, I can boot again the device and see again the Android Bootmenu, but each time that I select CUSTOM RECOVERY the photo show a blank screen and later the Motorola logo and operator logo loop...
Here I don´t know if this is correct or I miss press something in any step, but I can´t boot again in CW recovery or TWRP...
I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...
DroidAR said:
I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...
Click to expand...
Click to collapse
Dual recovery is only for JB ROMs.
DroidAR said:
I turn on the Defy+ normally and see that after wipes, the phone boot normally in a clean stock 2.3.5 if this info is usefull...
Click to expand...
Click to collapse
Install cm10 before, then install cm10.2
Sent from my MB526 using Tapatalk 2
hotdog125 said:
Dual recovery is only for JB ROMs.
Click to expand...
Click to collapse
thekguy said:
Install cm10 before, then install cm10.2
Click to expand...
Click to collapse
Thanks guys!
Ups, this mean than now I need install again from the 2.3.5 the 2ndinit to get back the CW recovery, right?
After this I need:
- Install the CM 10.1 from CW
- Install the CM 10.2 from CW or also here I need install before the DualRecovery and from TW install the CM 10.2?
Thanks for your help again!
DroidAR said:
Thanks guys!
Ups, this mean than now I need install again from the 2.3.5 the 2ndinit to get back the CW recovery, right?
After this I need:
- Install the CM 10.1 from CW
- Install the CM 10.2 from CW or also here I need install before the DualRecovery and from TW install the CM 10.2?
Thanks for your help again!
Click to expand...
Click to collapse
Yes. Then after installing CM10.1 install CM10.2.
hotdog125 said:
Yes. Then after installing CM10.1 install CM10.2.
Click to expand...
Click to collapse
Thanks, ready, already running 10.2
Anyone have the link of correct zip of gaaps? I already download one for 4.3 from goo.im but show me a error when I try install.
Thanks again!
UPDATE: I already download a pack from goo.im labeled as: gapps-jb-20130813-signed.zip
install done, but after turn on the phone I look that this pack not have Google Play, can be possible?
Phone work perfect but not connect to my local operator no signal, no 3G I select from settings-- Advanced -- Baseband selection -- and America Argentina Claro 3.4.2-107.9 that is my local operator. I reboot, but nothing work Any idea?
Click to expand...
Click to collapse
Fixed this I change by the 6.14.7 that no have the label of my operator and work!!!
Now look that all work fine after I install one pack of gapps called gapps-jb4.3-20130813-minimal_edited_20130814.zip from this post. All look good but the strange is that I need install all apps manually, not autoinstall when I login. Maybe because is a "minimal" pack, right?
Now I try restore some data from old apps that I made a backup with Titanium, but now titanium tell me that I not have ROOT access. This CM 10.2 ROM lack of root? How I can root again this ROM to can use titanium?
Thanks again!
DroidAR said:
Now look that all work fine after I install one pack of gapps called gapps-jb4.3-20130813-minimal_edited_20130814.zip from this post. All look good but the strange is that I need install all apps manually, not autoinstall when I login. Maybe because is a "minimal" pack, right?
Now I try restore some data from old apps that I made a backup with Titanium, but now titanium tell me that I not have ROOT access. This CM 10.2 ROM lack of root? How I can root again this ROM to can use titanium?
Thanks again!
Click to expand...
Click to collapse
Yes, the root access is a bug. To enable, go to developer options, root access, disable and enable again.
hotdog125 said:
Yes, the root access is a bug. To enable, go to developer options, root access, disable and enable again.
Click to expand...
Click to collapse
I try but no success Titanium continue tell me that not have root. Each time that I disable and enable again I need restart the phone? Thanks!
Any idea to can get root again and can use the Titanium? Thanks!

[Q] How to install ROM in galaxy y??

i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
aman95 said:
i am new to rooting & other things but i was able to install a hyperion rom because in its description, there were steps (one by one). i want to install cm7 rom but i tried to search the proceedure in the threads but could not find it. I tried installing it the same way i did the hyperion one but couldn't suceed. at the time of reeboting (the last step), my phone froze at the samsung logo for 10 minutes & nothing happened. please give me the detailed proceedure.
Click to expand...
Click to collapse
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
vlc07 said:
first mount system then flash
cyanogenmod#2 kernel then go to advanced & choose reboot recovery then format system data cache then mount sysem data cache again then flash cm7 rc1 rom zip after flash wipe data then reboot then u r done
Click to expand...
Click to collapse
can you explain, how to flash kernel. i think, i am facing problem dping this
aman95 said:
can you explain, how to flash kernel. i think, i am facing problem dping this
Click to expand...
Click to collapse
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
marcussmith2626 said:
you flash percys kernel the same as you flash any zip
go into cwm
mount system
flash percys kernel zip
restart to recovery
you will get mount errors (dont worry)
format system data and cache
mount system data and cache
then flash the cm7 zip as already explained
Click to expand...
Click to collapse
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
aman95 said:
Does it follow the same proceedure as the hyperion one, or does every ROM takes a different proceedure??
Click to expand...
Click to collapse
Flash instructions are given in the rom thread only.
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
aman95 said:
Thank you everyone, I have installed the nexus 5 ROM.
I just need to ask a few things.
I cant find the task manager.
And some features are locked for premium users. can i crack it somehow??
Please help
Click to expand...
Click to collapse
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
redndian said:
Are you ahead of Googs ? Even Google has not released Nexus 5
Sent from my TOASTER
Click to expand...
Click to collapse
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
aman95 said:
sorry, it was Nexus Me v5
this one- http://forum.xda-developers.com/showthread.php?t=2442977
So please help me with task manager
& unlocking it
Click to expand...
Click to collapse
you can add your own task manager to the framework or use an app from the playstore
and dont ask to crack apps to get paid versions or i'll report if this continues

Categories

Resources