Database Users

Bootloop, SBF issue >please help

I accidentaly installed the CM9 kernel when i should have installed the CM7 one with ICS. Then i made a nandroid restore of my previous CM7. Than... phone dead. Starting but no CWM no ROM booting.
As i have had CM7 with GB kernel( i think) i flashed ( not knowing) an old SBF than didn't booted. I tried the JORDN_U3_97.21.51 T-Mobile It boots, i can root it, install CWM.
But than when i try to install a CM7 nightly ( installed ok) it dies again. Starts but No CWM no Rom booting.
What to do? I don't know what SBF to flash or what method to install?
Problem update I red that the above SBF has a CG Version 3: SBF 2.51 (Éclair) (Defy) so i installed several CG Version 4: SBF 3.4.2 (Froyo) (Defy).
They don't work. RSD says PASS but phone is dead .No stock recovery no boot. Only way to get it back to life is if i flash the eclair again.
I red that if i get a back screen when booting i have installed a lower CG version. As i tested with version 4, version 5 GB is the only option. I didn't try it out because there are some issues. Froyo would have been much more easier.

i think many readers of your post are getting problems with understanding your problem ...
you got a stock defy, rooted it, installed 2ndinit via apk, booted into recovery (vol- at blue led) and installed CM7 zip ??? correct ???
after succesfull install of CM7 your phone doesn't turn on? Black screen?
black screen after zip is (i think) impossible ... but i can fail ...
i would like to help you, but first you have to give the detailed steps you did and what you wanted to do ...

To make it simplier
I installed the JORDN_U3_97.21.51 T-Mobile (which is 2.1 update1) It boots, i can root it, install 2nd-init > CWM. Set Normal boot.
Than in CWM nothing works.
Installing a CM7 nightly, or restoring a CWM backup.
I install a CM7 nightly like this> In CWM> Custom Recovery> Wipe data, wipe cache> install Cm7 zip, install Gaaps zip. After this, phone restarts, screen is on, logo appears and i wait and wait. Nothing happens.
Do i have to install a special CM7 build?
The CWM backup does not restore. It says that files are missing ( like android.secure..) I am not interested in keeping downgrade ability. i would like to try another SBF. I am not 100% sure what SBF to use from the wiki page.
I red that the SBF i installed has some special "problems" here> http://forum.xda-developers.com/showthread.php?t=905371. They are talking of a CWM revoery app by tenfair here> http://forum.xda-developers.com/showthread.php?t=875233
Maybe that works^. Will try it after the phone is fully charged.

so, ok ... thats detailed as i wish
ok, the problem is clear i think ... first of all eclair is not a nice system for a defy ... upgrade to froyo or even gingerbread ... (keep in mind, that GB has problems with green lens camera) ...
than you can root it with SuperOneClick e.g. ... if this is running correctly, you can install 2ndinit via apk ... then boot, vol- while blue led (i know, you know how ) ... in that clockworkmod recovery you can wipe the devices data and cache partition (even wipe dalvik cache in advanced menu) ... then install CM7.2-nightly-.... .zip ... you may have to flash an fixed sbf with the nessesary kernel for CM7 at this point to boot ...
if this is working fine, you can install the gapps.zip via recovery ...
also try to set boot to 2ndinit in boot-menu ... i don't think it's "normal" boot for CM7 ... but i can't try at the moment cause of my bricked defy ...

Thanks for the reply.
The problem is that i can't install other Froyo SBF's. Will try Gingerbread SBF. The last froyo didn't boot, will try a new one. Weird, i know. Maybe someone can tell me which CM7 to flash? An older one with Kernel ? I didn't think the install would be so tricky.

Froyo Full-SBF doesn't boot on your defy?
be aware of flashing Gingerbread then ... if GB doesn't boot, you will have a problem downgrading to froyo / eclair ...
it sonds crazy, that froyo isn't booting on your device ... have you done a full wipe after froyo sbf? it's important ...

I'm on the Eclair SBF right now. What should i do? Go into recovery and do a wipe or install a new Froyo SBF? It's about the CG value maybe. I understand the mechanism but don't know how to check the CG value. If i search for my current eclair SBF i get all sorts of weird stuff. Nevertheless i will try and try until i succeed. It took me a while to figure out the Rooting method. Superoneclick does not work. It's a special method for the 2.51.
The thing is that i wanted to go the my Nordic SBF( the one Quarx used during the first days of CM7) and it didn't booted. That's why i tried this one. Funny ho flashing the wrong kernel(CM9 instead of CM7) can brake things like this. What i don't understand is how my CWM backup didn't restore. It restored well, finished, then phone dead. No CWM.
edit: i just red: 2.51 is Not downgradable. But no downgrade to what??? Will try to some Froyo SBF's, see if works. But that does not solve my CM7 issues.

Tried a few Froyo SBF's. Wiped data/cache in Stock Recovery. RSD says PASS than phone does not boot. Only the 21.51 eclair works all the time.....Where next?
Update 2 got it to work with this>
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=cg

OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???

Glad it worked.
DJ_Synergy said:
OMG i dn't understand what was going on with your defy, but i'm happy to know your on the road again
the only sbf that are running are the stock eclair you have (21.51) and the modded BL6 with Froyo Kernel ???
Click to expand...
Click to collapse
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .

HI Deonix, I have the similar problem. However I am unable to use RSDlite as it gives a failure messg when u click start. I tried JRDNEM_U3_3.4.3-36-1.7.sbf and JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B50AA028.0R_USAJORDANRTINT15_P003_A020_HWp3_Service1FF.sbf.
Both failed, I will try using the rsdlite after the cache and factory rest this time based on your suggestions. Can you tell, if your adb command was listing your device, as mine is not.
my CWM is also gone I get some old android recovery system 3e instead which fails after signature check.

Hi,
I think I know what is your problem.
I also installed the firmware JORDN_U3_97.21.51 and now I can only install any Custom ROM after installing the firmware fix for JORDN_U3_97.21.51.
I did upload it for you: http://www.4shared.com/rar/o02VEk_v/firmware.html?refurl=d1url
It is the following:
Install JORDN_U3_97.21.51;
Rootear;
Install the Recovery;
Install the fix;
enter the recovery and install any rom you want, remembering to delete the caches (data and Dalvik cache)
ps: have 100% of the battery before installing the SBF.
any problems let me know.

Sometimes you could get stuck in a bootloop and all you need to do is pull battery and reboot
Sent from my MB525 using xda premium

Same Problem, Please help!
Deonix said:
Yes but now i am running CM9 flawlessly. So happy. The only thing that bothers me is the Chinese Boot screen )). But that can be changed. It's great that one SBF works, moded or not. I tried like 6,7 other Stock sbf's before. So a message to whom tries to install SBF's: Stay away from JORDN_U3_97.21.51 SBF. Even the Rooting method is awful (until you find it) .
Click to expand...
Click to collapse
Hey bro.
Even i have got the Defy working, but its not detecting the device when connected to the computer, i have done all the basic troubleshooting, is it working for you??
is it bcoz this room is for ME525??

[Q] Can't load after downgrade to 7.2 Jordan

Hi all
I use to run cm-7.2 Jordan without any issues. Decided however to upgrade and test cm10 but since I didn't find it stable enough I decided to downgrade back to 7.2. The flash succeed without issues but when I reboot I get stuck with the Google logo and the os never boot up.
I tried to go through cm.7.1 but no luck there, same issue.
Any clue how i can resolve this?

llavsor said:
Hi all
I use to run cm-7.2 Jordan without any issues. Decided however to upgrade and test cm10 but since I didn't find it stable enough I decided to downgrade back to 7.2. The flash succeed without issues but when I reboot I get stuck with the Google logo and the os never boot up.
I tried to go through cm.7.1 but no luck there, same issue.
Any clue how i can resolve this?
Click to expand...
Click to collapse
Try to wipe all from stock recovery ----> Power+Vol dwn

Kayant said:
Try to wipe all from stock recovery ----> Power+Vol dwn
Click to expand...
Click to collapse
Thanks for quick reply. I tried that and the phone loaded a android character with a triangle and a exclamation mark. I don't have a good feeling about that

llavsor said:
Thanks for quick reply. I tried that and the phone loaded a android character with a triangle and a exclamation mark. I don't have a good feeling about that
Click to expand...
Click to collapse
That's good sorry forget to say you need to hold VOL dwn& Vol Up at the same time then wipe all...
Good luck

Exactly the same problem here, cannot downgrade to CM7.
Any good news?

Flash official froyo (I used ver 2.2.2)sbf via rsdlite. Root it using superoneclick and install 2init bootmenu 2.0. In custom recovery do full factory wipe follow with restore your nandroid 7.2 if you have them. If it booting hang at start screen, flash any froyo fixed sbf that contain the froyo kernel(optional). This way all your previous user data will still be intact.
Sent from my awesome rooted Defy: 2.3.6 XDA premium

So the recovery won't work and will have to start with SBF. Will wait until I have the computer environment to do so.
Thanks!

Kayant said:
Try to wipe all from stock recovery ----> Power+Vol dwn
Click to expand...
Click to collapse
farsight73 said:
Flash official froyo (I used ver 2.2.2)sbf via rsdlite. Root it using superoneclick and install 2init bootmenu 2.0. In custom recovery do full factory wipe follow with restore your nandroid 7.2 if you have them. If it booting hang at start screen, flash any froyo fixed sbf that contain the froyo kernel(optional). This way all your previous user data will still be intact.
Sent from my awesome rooted Defy: 2.3.6 XDA premium
Click to expand...
Click to collapse
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone

llavsor said:
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone
Click to expand...
Click to collapse
Wipe all from stock recovery that's you needed to do btw before installing cm7.... Sbf is not needed.
Go to stock recovery and wipe all your ROM should boot...
Let's Go ^_^

llavsor said:
Okey I have now flashed 2.2.2 sbf with RSDlite and after flash the phone still hangs during boot, now with the ugly Motoroly M instead of the Google logo from CM. So I guess I am back to square one, any idean anyone
Click to expand...
Click to collapse
Factory reset from stock bootmenu again. If it still hangs, flash sbf again with another factory reset afterwards just to be safe. BTW, I've had times where 3+ sbf flashes with factory resets were needed to get the phone to boot again.
One problem you might be having is if you formatted /data and /cache to ext4. Maybe it was just me, but I had to reinstall CM10, change back to ext3, flash sbf, then install CM7. Changing to ext3 and flashing CM7 didn't work -- same problem you're having. I wasn't sure if ext4 was the problem so I made sure I changed back to ext3 before sbf flashing. I'm not sure if the sbf reformats the partitions or just wipes them like a factory reset. If you've already flashed the sbf, then you can't install a CM10 rom to change back to ext3... Worse come to worse, you maybe able to install one of the custom sbf's with CM10 custom kernel preinstalled, change to ext3, flash official sbf, factory reset, then install CM7. I haven't looked into them because I make my own custom sbf's .
Bravo users are having this exact problem and my solution is to ensure that /data and /cache are ext3, flash the sbf and start from scratch -- the only guaranteed way I know of to fix this problem. Another Bravo user had the same problem and managed to fix it by changing some /data permissions over adb -- the user didn't specify the exact things done so I'm waiting on a reply with more details.

skeevy420 said:
Factory reset from stock bootmenu again. If it still hangs, flash sbf again with another factory reset afterwards just to be safe. BTW, I've had times where 3+ sbf flashes with factory resets were needed to get the phone to boot again.
One problem you might be having is if you formatted /data and /cache to ext4. Maybe it was just me, but I had to reinstall CM10, change back to ext3, flash sbf, then install CM7. Changing to ext3 and flashing CM7 didn't work -- same problem you're having. I wasn't sure if ext4 was the problem so I made sure I changed back to ext3 before sbf flashing. I'm not sure if the sbf reformats the partitions or just wipes them like a factory reset. If you've already flashed the sbf, then you can't install a CM10 rom to change back to ext3... Worse come to worse, you maybe able to install one of the custom sbf's with CM10 custom kernel preinstalled, change to ext3, flash official sbf, factory reset, then install CM7. I haven't looked into them because I make my own custom sbf's .
Bravo users are having this exact problem and my solution is to ensure that /data and /cache are ext3, flash the sbf and start from scratch -- the only guaranteed way I know of to fix this problem. Another Bravo user had the same problem and managed to fix it by changing some /data permissions over adb -- the user didn't specify the exact things done so I'm waiting on a reply with more details.
Click to expand...
Click to collapse
Okey good advice.
Here is where I am at now. I have flashed a number of different SFBs and I end up with the same situation every time. RSDLIte finish the process nicely but the phone get stuck with the flashing M. When I reboot manually I get passed the M and to the Android text/logo and there I get stuck.
I get advice to do a factory reset but how do I do that. The CW bootloader is gone and I can't get to the original boot loader either. I hit volume down and power, get to the triangle screen where I am supposed to hit the right bottom corner but nothing happens.
So I cant boot the phone to get into a menu where I can change to ext3 if this is a problem.
Please help, how can I get further?

Since I have no luck restoring stock rom I now have the following plan.
Install ClockWorkMod recovery with ADB.
Using recovery to do a factory reset and clear cache.
Flash a CM10 ROM (or any rom that will successfully boot up my phone).
From that start over to downgrade to CM9 to find a stable ROM.
The question I have now is if I will be able to use ADB with the USB connection mode I get from the bootloader (volume up+pwr button)? Or does ADB actually require that I can boot my phone and go into some other USB mode such as UMS or MTP.
Second question. Playing with restoring stock ROM i run out of battery and now my defy wont charge (only see a big question mark when loading). Seems like I get no power when USB is connected so is there a way for me to charge the battery or do I need to find another happy camper in town with a working defy that can power up my battery?

llavsor said:
Okey good advice.
Here is where I am at now. I have flashed a number of different SFBs and I end up with the same situation every time. RSDLIte finish the process nicely but the phone get stuck with the flashing M. When I reboot manually I get passed the M and to the Android text/logo and there I get stuck.
I get advice to do a factory reset but how do I do that. The CW bootloader is gone and I can't get to the original boot loader either. I hit volume down and power, get to the triangle screen where I am supposed to hit the right bottom corner but nothing happens.
So I cant boot the phone to get into a menu where I can change to ext3 if this is a problem.
Please help, how can I get further?
Click to expand...
Click to collapse
In froyo, you should hit vol up/down together to enter stock recovery.
If you have your cm7 nandroid or your gingerbread nandroid 2.3.6. In,custom recovery cm10, restore them. Your phone would not boot but you have your cm7 or gingerbread cwm by then, that you could format cache and total wipe back to ext.3 in the recovery menu, format/wipe follow with another nandroid restore and flash fix sbf from rsdlite.
But then the best way is go back totally clean by flashing stock froyo and root, install 2init with bootmenu 2.0. Then total wipe in recovery follow with restore your cm7 or gingerbread nandroids and flash the corresponding fix sbf via rsdlite.
Charging dead rom defy would need the MacGyver trick then. But some say if you leave it connected overnight in pc usb would charged it somehow but slow..
On 2nd thought.. you need to tell us yoyr defy model...green lense, red lense or the defy plus?? These models has their own characteristics in term of play around in cwm and way of flashing..
Sent from my awesome rooted Defy: 2.3.6 XDA premium

farsight73 said:
In froyo, you should hit vol up/down together to enter stock recovery.
If you have your cm7 nandroid or your gingerbread nandroid 2.3.6. In,custom recovery cm10, restore them. Your phone would not boot but you have your cm7 or gingerbread cwm by then, that you could format cache and total wipe back to ext.3 in the recovery menu, format/wipe follow with another nandroid restore and flash fix sbf from rsdlite.
But then the best way is go back totally clean by flashing stock froyo and root, install 2init with bootmenu 2.0. Then total wipe in recovery follow with restore your cm7 or gingerbread nandroids and flash the corresponding fix sbf via rsdlite.
Charging dead rom defy would need the MacGyver trick then. But some say if you leave it connected overnight in pc usb would charged it somehow but slow..
On 2nd thought.. you need to tell us yoyr defy model...green lense, red lense or the defy plus?? These models has their own characteristics in term of play around in cwm and way of flashing..
Sent from my awesome rooted Defy: 2.3.6 XDA premium
Click to expand...
Click to collapse
Thanks for very informative reply. I have a Defy 525 with red lens.

It's working.
I found a friend blessed with a defy and used that to charge the battery, tried to charge it over night with USB but it didn't work.
I then followed the steps from the last post and managed to flash a stock rom and then from there I rooted the phone with SuperOneClick, installed 2ndInit with ADB (guess you could use an apk installer from the phone as well ). I booted into recovery and flashed 7.2.0 Jordan from CM and now I am where I started a few weeks back.
Thank you all for your help.

That was the low battery problem.......
Since i had this i allways look for a full battery
If you think your defy is dead , a look for a empty battery won't be mad
Could anybody took a reminder info into beginners guide
MB525 red lense

urgent! stuck on splash!

hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!

Hi,
is there a Odin Version of the Rom you tried to flash? If yes, you could simply bring your device to download-mode and flash the Rom with Odin.
Alternatively search for a odin flashable Recovery and flash this first. Then you could boot to recovery and flash the zip of the Rom.
Sent from my GT-I9505 using xda app-developers app

i tried installing the liquid smooth rom, and from what i can see there is no odin version of the rom :\
Are you able to direct me to an Odin flashable recovery I can use?
im really stressing out about this
i'm in the process of downloading a stock firmware and will try to flash it on, but it's taking forever to download

I don't see why you can't boot again if you have only wiped the user data and cache, just press the home button for 10 seconds and see if it restarts with your reset stock firmware. Otherwise you can reboot into recovery and do the wipes again (not the option to install a new ROM), or put the ROM zip you want to flash on an SD card and then flash from the SD.
I hope this helps.

suwidji said:
hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Click to expand...
Click to collapse
You should of made a backup with CWM. That's what it's used for also, besides flashing .zips. Always make a backup that you can restore and keep an extra copy on ur computer and/or a usb drive.

You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.

when i first did the wipe, i chose the option that i was going to install a new ROM. I'm now assuming that's where i made a mistake.
I did make a backup before i wiped everything onto my SD card, but now i can't even access that backup because it's saying there's nothing.
I've tried flashing a ROM onto it, but it says aborted.

Yes SORF ist right. It should boot into resetted stock firmware.
First try to copy the Rom to SD and then boot to recovery an try flashing it.
If booting to recovery doesn't work (but it should work if you just wiped user data and cache) you should try flashing new recovery with odin.
You could use Philz recovery for GT-I9505 from here http://forum.xda-developers.com/showthread.php?t=2281367
Installation Instructions for installation with odin you find here http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4

windozeanti said:
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
Click to expand...
Click to collapse
Thanks, that's what I'm doing right now, but the file is about 1.8GB and taking so long to download...
i wish there was a faster server, but this is the only option i could find :\

Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.

j0ch3 said:
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
Click to expand...
Click to collapse
yes i have tried that, and it says that install aborts.
Also when i re-wipe everything and then try to reboot, it says my device is missing root.
When i try to re-root, and the device reboots, it gets stuck on the intro screen again so the root doesn't actually complete installing

have you fixed it yet?

so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda

Why does it fails to install? Are there any more error messages?
Also you can try the point "Fix Permissions" under Advanced Options. This could help.

suwidji said:
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Click to expand...
Click to collapse
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
for a solid Sami based rom then i suggest using GoldenEye.

scottyf79 said:
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
Click to expand...
Click to collapse
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?

Cyanogenmod is themeable. So you could search for a stock like theme and install that.
If you like an overall more stock rom try scottyf79's recommendation.
If you want to flash a complete new Rom first copy zip onto sd, then boot into recovery, wipe data and cache, then falsh zip file.

Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)

suwidji said:
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Click to expand...
Click to collapse
personally -
i use Philz recovery
before install of a new rom - i use the "new rom" wipe option rather than the normal data,cache and dalvik wipe (it does this but adds in some extra steps)
then flash the rom of choice
if you get any other messages before reboot - select no
like i said before, if you want a stock looking Sami rom then try Golden Eye.

Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)

Can't install stockmod stuck at LG bootscreen HELP!

As the title probably hints i cant seem to install stock mod i mean it says it is successful in TWRP but when i reboot it just stay on LG bootscreen
I have installed this rom before but then went to cyanogen which i didn't like as much as stock but can't seem to go back
currently running stock
Edited:
Managed to get back to stock via this method: http://forum.xda-developers.com/showthread.php?t=2432476
Just can't seem to install StockMOD :/

callum1986 said:
As the title probably hints i cant seem to install stock mod i mean it says it is successful in TWRP but when i reboot it just stay on LG bootscreen
I have installed this rom before but then went to cyanogen which i didn't like as much as stock but can't seem to go back
currently running stock
Edited:
Managed to get back to stock via this method: http://forum.xda-developers.com/showthread.php?t=2432476
Just can't seem to install StockMOD :/
Click to expand...
Click to collapse
Are you formatting? Try to format /system also then flash it. if all else fails go back the the stock rom. good luck

thenewak said:
Are you formatting? Try to format /system also then flash it. if all else fails go back the the stock rom. good luck
Click to expand...
Click to collapse
Thanks for reply yes i formatted and even reverted back to stock following the above link i even wiped phone where it deletes everything included sdcard but no matter what i try StockMOD rom wont boot when flashing
p.s. its the D802 i have
Well i assume i formatted as in wipe menu on TWRP i selected everything other than internal storage

callum1986 said:
Thanks for reply yes i formatted and even reverted back to stock following the above link i even wiped phone where it deletes everything included sdcard but no matter what i try StockMOD rom wont boot when flashing
p.s. its the D802 i have
Click to expand...
Click to collapse
Hmm that's weird, have you tried re flashing your recovery maybe something is broken there? have you tried other roms? If using TWRP try to update it or change to CWM or vice versa

Yea I updated to 2.6.3.4 which as of my knowledge is the latest
Sorry for my noobness :/ it is really bugging me as I think it has something to do with having cyanogen installed before but then again after pursuing the flash tool and restoring back to stock I can't think what is wrong
Sent from my LG-D802 using xda app-developers app

Double Flash seemed to fix it
I flashed the ROM after returning to stock again and before flashing it wiped all partitions and it still stuck on boot so i went straight back into recovery and flash again this time without wiping anything as i was only writing over the StockMOD install and it seems to work
So the solution for me seemed to me to flash it twice wiping before the first and after it fails to boot just flash it again without wiping.
I now have it up and running and I'm very happy with it
Thanks for those who tried to help me much appreciated

[Q] uninstalling slimkat (cm11)

Hi guys, need some help here. I'm sure this has been asked before but i just couldn't find any
Installed slimkat 20140406-0134 rom (cm11) last night and it's basically working. But I'm still not feeling comfortable using it as there's still bugs around. So thought of going back to cm7.2 for now. But for the life of me couldn't figure out how to get to the tool section so I can re-partition it back to ext3!!!
All I could get in to is twrp recovery and that's it. how do I even get into the bootmenu section where I can choose recovery, cpu settings, tools, etc? There's no red Moto logo with blue LED at boot up anymore
Is there any uninstall instruction somewhere, or perhaps someone should write one?

44 viewers but no reply
any idea if i can install some sort of apps to achieve the same end? like a wipe app to re-partition it to ext3, and then an older recovery to install cm7 rom, or restore my cm7 backup?
don't really want to just try and see what will happens. also trying to avoid flashing sbf and start from scratch.....
edit: will aromawiper work? reboot to twrp recovery 2.6.3.0, aromawipe to ext3 and then flash cm7.2 rom straight after? expert opinion and advice please.
edit 2: oh well, tried it and didn't work. might be because i didn't install an older, compatible recovery before i rebooted. stuck at red moto logo and had to flash sbf and start all over again......
case closed...........

jh20 said:
44 viewers but no reply
any idea if i can install some sort of apps to achieve the same end? like a wipe app to re-partition it to ext3, and then an older recovery to install cm7 rom, or restore my cm7 backup?
don't really want to just try and see what will happens. also trying to avoid flashing sbf and start from scratch.....
edit: will aromawiper work? reboot to twrp recovery 2.6.3.0, aromawipe to ext3 and then flash cm7.2 rom straight after? expert opinion and advice please.
edit 2: oh well, tried it and didn't work. might be because i didn't install an older, compatible recovery before i rebooted. stuck at red moto logo and had to flash sbf and start all over again......
case closed...........
Click to expand...
Click to collapse
you can flash cm10 to get the boot menu to format to ext3 then flash to cm7.2.
Thats what i did when i tested cm11.

Or use Aroma wiper to format to ext3 and flash CM7.2.
Sent from my Nexus 7 using Tapatalk

aperture said:
you can flash cm10 to get the boot menu to format to ext3 then flash to cm7.2.
Thats what i did when i tested cm11.
Click to expand...
Click to collapse
thanks. i'll remember that next time. don't know why i didn't think of that. panic striken maybe
hotdog125 said:
Or use Aroma wiper to format to ext3 and flash CM7.2.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
that's exactly what i did but didn't work. aromawiper seems to have worked properly but twrp 2.6.3.0 keep saying "no os installed" after i installed the gb rom and tried to reboot. tried maniac's cm7.2 and an older wiui gingerbread rom. i thought it might be a hickup and rebooted anyway and that was it.
don't know what went wrong there. has anyone actually tried this method before and got it to work?
edit: imho twrp is not worth it. it rebooted 8-10 times on me after installing cm11 and tried to get back into recovery to flash gapps. also other problems like blank backup files and my failures to install rom problem. they should have stuck to cwm until the problems are fixed.
edit 2: and i think removing bootmenu is not a good idea. more steps to take if you want to go back to cm7.2.