[Q] help required after tpt rom upgrade - Blade General

Hi all
new to this, but decided to upgrade to the following on the development thread
Ginger Stir Fry Beta 26 Gen1 to Gen2 Upgrade TPT
Download: gsf-blade-b26-tpt.zip mirror mirror mirror mirror
Download size: 100.91mb
MD5: 3a30189a8e569146a6e7f72f80afe354
SHA1: b1cef337491974870ff0598e2e00f40ca70d1b35
upgrade fine, until i tried to use the phone to ring someone, the screen goes blank
(i can hear the call) phone completely unresponsive cannot do anything will not even switch off i have to take the battery out.
can anyone help and if so please make it simple.
thanks

It happened to me as well, luckily I got the recipient to end the call, I then got somebody to call my phone, all worked well.
Now it works as it should, I can make and receive calls without the screen going blank etc.
sent using tapatalk

Hi,
I gave up in the end installed clockwork and managed it install swedish spring rom instead running well everything working. don't think i dare do anything else!!

Aef 101 said:
It happened to me as well, luckily I got the recipient to end the call, I then got somebody to call my phone, all worked well.
Now it works as it should, I can make and receive calls without the screen going blank etc.
sent using tapatalk
Click to expand...
Click to collapse
This worked for me until I switched off the phone.
I fixed the problem permanently by re-calibrating the proximity sensor. I did this by down loading a tool called "Proximity Sensor Calibration" supplied by zte and from the Play Store.
Even from battery removal the phone switches on and calls successfully.

Related

HD2 ... "skips" sms!

I have a problem with my HD2.
Sometimes when i have my phone on my desk (with screen off/standby mode) i noticed that the backlight of the screen turns on but nothing happens... no notifications or anything...just turns on.
Today i discovered what it is. I texted a friend and in less than 2 mins he replied to me. The backlight again turned on but again there was no notification. I mean not at all. He sent me an sms but the phone doesnt display it! Also not in the messages neither in sense messages... (i am sure he did cause i called him and he told me he replied to my sms).
This means that i lost many messages....
Does anyone of you has noticed the same problem...?
If yes, is there a solution ?????
yes, it happens to me too, only i use hd instead of hd2. this sucks.
i had this issue before.
then i flashed the lastest firmware, currently using 1.72 firmware, and it is working fine now.
get the firmware from your local htc website.
I flashed the latest ARTEMIS rom v22 from the stock 1.66 and i just noticed that the phone does the same thing again....
So i guess it's a bug from the original messaging system.
Is there any solution to this...?
I start hating this thing..

Missing calls with official 2.3.5

Hello everyone;
I flashed the latest official 2.3.5 last night. Missed three calls afterwards, as if I was not connected to GSM network. I was at home and signal was stable as usual. Anyone else noted unusual GSM behaviour?
Cheers
----------------------------------------
UPDATE: In order to better understand this issue, it could be interesting to know which service providers are being used; in my case, TMN in Portugal.
One week before flashing this ROM, I started using 3G, so I'm not sure if these missing calls are as result of the ROM change. I'm going to switch back to 2G for daily use and see how it goes.
Yes, if you search you will find other users with the same problem.
happens also with the other beta roms.
Sent from my U8800 using XDA App
It happens to me too unfortunately.. can't tell the reason why. GSM status seems ok.
I confirm this missing call issue.
People when ring me the first time they go straight to voicemail and only get connection on second try.
I think the only way to solve it is Huawei but there is not point of trying to speak to them and they just won't listen for what people say to them.
I can confirm this is happening to me too....after reporting all was well this was one of the things I didn't test out.
Weird thing is that I called my mobile from home and both went straight to voicemail...
yep.
but if you immediatly make a 2nd attempt you get connection
OK try this...
Turn off phone... re move battery and sim card.
Replace battery and start phone without sim card and boot up.
Unlock phone and open any app (doesn't matter just do something)
Turn off, remove battery, replace sim.... boot up again.
Just called from my wifes mobile phone and my phone rang OK.... will test further but that seems to have done the trick for now.
I got the same problem and so far nothing i did solve it... Just missing reinstall the rom again and see if wasnt any bug i got while installing... I don't see too many ppl with the same problem and i don't belive huawei had so many diferent hardwares in a single mobile phone model according with all the different ppl have with different phones.
I also have this problem with the new firmware. My phone doesn't connect to the network upon powering on.
I have to manually connect it, by going into the Mobile networks settings. Once i'm in that menu, it connects.
druida_69,
I can confirm that does not happens every time, I tested from other phone I only on the sixth call I got the ring... Worst, during this time I made a call without problems.
The question is on reception...
Sent from my U8800 using XDA App
this issue is killing me.
when I have the device disconnected or in a cal, when someone try to ring me and can't I always receive a message informing that the xxxx number tried to ring you at that time bla bla bla.
no calls
The same thing happened to me... also tried many things without success... downgraded to 2.2.2 (B138) problem solved...
I'm getting tired of huawei's poor support and buggy updates!!!
To be honest i don't know if this start to happen after or before installing geno‘s OC Kernel.
I can confirm that this happens when the phone stays for a long time inactive. Try not playing with you're phone gore 20 minutes or so and then try to ring youselves.
Its like if the phone entering in a zen deep sleep....
Same here
Started after updating to 2.3.5, anyone tried the updated 2.3.5 from Huawei? it removes the pink screen I heard, but maybe it fixes this issue
F****** Huawei. Just realised that I have this bug too with latest 2.3.5 release... I think that it's data dependent. If you turn them off it connects ok...
I didn't realize until I read this thread, but I have the same problem!
I'm over it, I'm going back to Oxygen until I can buy a new phone, and will probably never buy huawei again.
I had this problem initially but since I booted up without sim card and boot up again with it in hasn't been a problem...I've had to test this on a few different phones & reboots now and everything is fine....
Clevo89 said:
I had this problem initially but since I booted up without sim card and boot up again with it in hasn't been a problem...I've had to test this on a few different phones & reboots now and everything is fine....
Click to expand...
Click to collapse
I 've just done that and it seems to be fixed.
I 'll test it until tomorrow and if it works ok I will do a marrige proposal to you.
Thanks for now!
I've also tried, let see if this works!
Regards!
Didnt worked with me

[Q] 4.2.2 update-can't make calls

Hi All,
I'm currently using Straight Talk with ATT SIM. Everything was working fine. I updated the software to 4.2.2 on Sunday. It didn't come OTA so I updated by going to Google Services Framework, clear data, then force stop. After a reboot, the OTA 4.2.2. showed up and I updated then.
Now, I am realizing that I cannot make or receive calls at all. Phone shows signal strength at 100% (4 bars) but when dialing, it does not go through, just silence, then a beep, then ends call.
I have tried rebooting phones, pulling SIM card out and replacing (twice) all with no luck.
HELP!!
Edit: I just realized I don't have internet connection either.
Larry216 said:
Hi All,
I'm currently using Straight Talk with ATT SIM. Everything was working fine. I updated the software to 4.2.2 on Sunday. It didn't come OTA so I updated by going to Google Services Framework, clear data, then force stop. After a reboot, the OTA 4.2.2. showed up and I updated then.
Now, I am realizing that I cannot make or receive calls at all. Phone shows signal strength at 100% (4 bars) but when dialing, it does not go through, just silence, then a beep, then ends call.
I have tried rebooting phones, pulling SIM card out and replacing (twice) all with no luck.
HELP!!
Edit: I just realized I don't have internet connection either.
Click to expand...
Click to collapse
Did you forget to pay the bill?
Sent from my Nexus 4 using xda app-developers app
What radio are you on?
Sent from my iPad 4
BigDig said:
Did you forget to pay the bill?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Haha. I wish it was that easy. No...account is current
mitchdickson said:
What radio are you on?
Sent from my iPad 4
Click to expand...
Click to collapse
Sorry for the newbie response but how can I find out what radio I am on?
Ah...found it.
Radio: 2.0.1700.48
I was on the same situation a couple days ago. after flashing 4.2.2, I can still make a call, people can still call me, but no sound from either me or them. The micros work fine (you can check by Voice Search).
At that time, after I ended messing everything up, I restocked the phone to 4.2.1. Everything worked fine after then. I dont know why this happens. You may wait for another solution. Just let you know that a restock can fix it, so dont worry. However I dont encounrage it becuase it wipes your phone completly.
opticaldh said:
I was on the same situation a couple days ago. after flashing 4.2.2, I can still make a call, people can still call me, but no sound from either me or them. The micros work fine (you can check by Voice Search).
At that time, after I ended messing everything up, I restocked the phone to 4.2.1. Everything worked fine after then. I dont know why this happens. You may wait for another solution. Just let you know that a restock can fix it, so dont worry. However I dont encounrage it becuase it wipes your phone completly.
Click to expand...
Click to collapse
Thanks for your reply. Yeah, I would like a solution that doesn't require complete wipe of phone.
So frustrating...been unable to use phone all day. Who knows how many calls I've missed.
Larry216 said:
Thanks for your reply. Yeah, I would like a solution that doesn't require complete wipe of phone.
So frustrating...been unable to use phone all day. Who knows how many calls I've missed.
Click to expand...
Click to collapse
In case you have no choice, back up your phone by Titanium backup. That saves everything you have at the moment
Same issue after 4.2.2 update
I'm having the exact same issue with my Nexus 4. Let me elaborate. I've had my Nexus 4 since the initial sale, today I got the OTA update sent via Tmobile. My phone seemed to work fine afterwards until I tried to answer a call. Upon attempting to answer or make a call (even with full service) the bars instantly drop to zero (hollow triangle) and an out-of-area tone & message display.
Restarted, pulled sim, sim worked fine in other phone, checked & rechecked APN/other settings, had Tmobile "reset" my device on network, finally wiped my device. I still can not make or receive phone calls. The radio seems to just disconnect when attempting to.
Spoke with Tmobile customer support (worthless), Tech Care (Very helpful & knowledgeable but no fix), Google Nexus support (Offered to replace device! However can't have any cosmetic damage). LG also contacted but zero assistance given.
I'm stumped, it seems to me that this issue might be related to the update disabling the LTE radio, because data & everything else works except for making calls. Like I said, Google offered to replace the device however I did (in good faith) advise them of a hairline crack on the back of the device, like many other N4 owners have had, not from a drop. Upon hearing of cosmetic damage they said that it's no longer their liability. I'm very disappointed but I understand.
Since the warranty is void from the crack, I'm going to root & play around.
Any questions or advice?
---------- Post added at 08:10 PM ---------- Previous post was at 07:44 PM ----------
Also, I'm on the same radio (Baseband?) as OP.
Radio: 2.0.1700.48
I'm curious to see if rooting will solve this issue. If yes, I will go this route.
Keep me posted. So frustrated.
Thanks johnmedic.

making & receiving calls.. getting dead air half the time...

Hi everyone, i am having a couple issues with my phone. Im no pro, but after rooting my old s3 i got thr s4 and rooted it before even making a call. i installed the pac-rom ROM and its been working great except for the following...
about 3 of 10 calls when answered is dead air, the person on the other end says it rings then stops to dead air..
also about 3 of 10 calls placed are dead air also, the person on the other end gets a ring and answers to dead air.. my call timer starts counting as a normal call would, not as if the phone is unable to gain a network connection to make the call, where the phone just wouldnt connect. i dont hear ringing.
its very annoying. not so much when making the call, but when trying to answer a work call then having to call them right back as they are trying to call you back and leaving a VM or something.. i talked with Telus, and of course they see nothing wrong. but they will only do so much as my phone has a custom rom and they just blame the problem on that regardless of whats actually causing it.
donation coming to whoever can get this fixed for me!
also, when i have google chrome open, or by using the google search bar, i cant google anything or go to my bank website from my phone. it seems that all secure webpages cant be viewed.. im also having a problem where some pages just wont load. wireless or not.. gives me a server error connection refused message.
im more worried about the connection problem than the surfing problem, any help is appreciated though! thanks!
anyone?
What device, what rom, what version of baseband, come on, more info will yield more answers...
If it's a 4.2 AOSP ROM, it's possible that the audio fix from cm hasn't been merged, and even if it has, there are still issues. There is a modified phone.apk you can try as well, just search the forums for it. This issue shouldn't be an issue much longer since it doesn't exist on 4.3
Sent from my SGH-I337 using Tapatalk 2

[Q] Dialer goes black when making calls and no sound

I have an s4 from rogers (Canadian model) and initially had cyanogen mod as my rom but I realized that I was missing nearly 5 GB of storage on my phone. I read that to fix this I had to go back to stock using Odin. I went back to stock 4.2.2 using Odin, but then my WiFi stopped working. I couldn't turn WiFi on or search for networks. I then rooted my phone and installed a rom and my WiFi problem was fixed, but now I cant make calls. Every time I try to call someone my screen goes black and the recipient cannot hear me and I cannot hear them. Also, the sound on my phone does not work. I have flashed multiple roms and still get the same problem. Does anyone know any possible solution. I have looked around and many people have had the same problem, but no solution. Any help would be appreciated.

Categories

Resources