Database Users

[Q] Blank Screen

So I just rooted my device and then tried to install a lag fix... when I rebooted my phone after the script, I heard the T-Mobile jingle and then it came to a blank screen. When I pressed the power button there was no response. If I press any of the white keys at the bottom, they just light up. I CAN turn my phone off and go into recovery mode.
This thing has kind of shaken me up so I am willing to go back to an unrooted phone.
PLEASE HELP!

Nandroid, my friend.
Since you are able to boot into recovery, do a nandroid restore.
If you do not have your own nandroid backup There is a thread in the Dev forum you can dowload one from. Just search "[ROM] OFFICIAL T-Mo Vibrant JFD ODIN/Nandroid Backup Images 7/29/10 (Tested/Working)" (I can't hotlink yet. sorry)
This is all assuming you have installed clockwork recovery, which you should have done before you attempted any modding of any sort. Also always remember to create a nandroid of your current system before trying something that is still in beta.

i got same problem here and a don't have clockwork recovery :-(

Then you have to use odin if you don't have clockwork...
My phones have been flashed more than Girls Gone Wild..
[email protected]

I think I found a fix that works...
I just went to recovery mode, and deleted all user data.
I then rebooted and still had a blank screen for about 10 seconds, and then my lock screen came up.
Worked for me! Thanks everyone.

nearblack said:
So I just rooted my device and then tried to install a lag fix... when I rebooted my phone after the script, I heard the T-Mobile jingle and then it came to a blank screen. When I pressed the power button there was no response. If I press any of the white keys at the bottom, they just light up. I CAN turn my phone off and go into recovery mode.
This thing has kind of shaken me up so I am willing to go back to an unrooted phone.
PLEASE HELP!
Click to expand...
Click to collapse
Sorry to resurrect old posts, but I would like to know If after rooting and lag fixing it, it didn't show ABSOLUTELY NOTHING on boot screen and you were only able to hear the sounds and the buttons lit up...
I have a Vibrant on this situation and would like to know I this procedure can fix it.
Best Regards.

Just wait 10 mins if nothing do a battery pull...boot...wait another 10. It will boot after that. Had same issue on two vibrants.
Sent from my SGH-T959 using XDA App

Happendd to me. Just let it sit there. It'll boot.
Sent from my SGH-T959 using XDA App

This happen to me I tired volume up+down+ power nothing happen...... here's what I found...Unplug ur battery n plug it back in with ur usb n when it turns on use adb on ur computer..... adb reboot recovery n do a data wipe
Hope this helps
Sent from my SGH-T959 using XDA App

Thanks for your answers, will try them all and report results.
Best Regards.

[Q] Problems with recovery

Heey guys,
I have a huge problem.
I recently restored my Azure 1.01 rom back to defaults,
BUT now my phone won't boot
I tried to go in recovery on my Windows 7 x32 pc
And on Ubuntu and a x64 machine.
But I still can't acces the recovery functions of my phone.
My phone is rooted though, But in windows i keep getting the message that he needs to install the driver called "Qualcomm CDMA Technologies MSM"
I tried looking around for 2 days now but i can't find anything!
Please Help!!
P.s. I'm sorry for my english

pcfreak13 said:
Heey guys,
I have a huge problem.
I recently restored my Azure 1.01 rom back to defaults,
BUT now my phone won't boot
I tried to go in recovery on my Windows 7 x32 pc
And on Ubuntu and a x64 machine.
But I still can't acces the recovery functions of my phone.
My phone is rooted though, But in windows i keep getting the message that he needs to install the driver called "Qualcomm CDMA Technologies MSM"
I tried looking around for 2 days now but i can't find anything!
Please Help!!
P.s. I'm sorry for my english
Click to expand...
Click to collapse
You can load the default recovery by holding down VOL - and POWER, select RECOVERY, then press AND HOLD, VOL + and POWER to load update.zip which *should* load ClockWorkMod.
Try wiping cache and do another factory reset. First boot may take many many minutes
Edit: Also, no question under development! Mod, please move to general..

Moved to general as not development

Kwen said:
You can load the default recovery by holding down VOL - and POWER, select RECOVERY, then press AND HOLD, VOL + and POWER to load update.zip which *should* load ClockWorkMod.
Try wiping cache and do another factory reset. First boot may take many many minutes
Edit: Also, no question under development! Mod, please move to general..
Click to expand...
Click to collapse
Wow tnx man for your quick response,
I tried your methode BUT it seems that it can't reed my SD-Card
When i select 'Apply sdcard:update.zip' it comes with a lot of errors:
Cant mount /dev/bl......
Cant find /sdcard/upd.....
I checked and double checked if the update.zip was there, it is!
And also i reformatted my SD twice.
But still it wont work i also tried to wipe everything but that wont work either.
I have also noticed that everytime i boot my phone normally it creates a .dm file on my SD!?
in case it is usefull my bootscreen keeps reappearing with everytime a shorter sequence
If yo can help my please!!!
p.s. I'm sorry i placed it in the wrong catagorie...

pcfreak13 said:
Wow tnx man for your quick response,
I tried your methode BUT it seems that it can't reed my SD-Card
When i select 'Apply sdcard:update.zip' it comes with a lot of errors:
Cant mount /dev/bl......
Cant find /sdcard/upd.....
I checked and double checked if the update.zip was there, it is!
And also i reformatted my SD twice.
But still it wont work i also tried to wipe everything but that wont work either.
I have also noticed that everytime i boot my phone normally it creates a .dm file on my SD!?
in case it is usefull my bootscreen keeps reappearing with everytime a shorter sequence
If yo can help my please!!!
p.s. I'm sorry i placed it in the wrong catagorie...
Click to expand...
Click to collapse
It look like your phone i bricked, go into this tread (http://forum.xda-developers.com/showthread.php?t=751265) and follow the steps

HpX said:
It look like your phone i bricked, go into this tread (http://forum.xda-developers.com/showthread.php?t=751265) and follow the steps
Click to expand...
Click to collapse
I thought that to but now the problem is that i can't boot at all!
That i forget to mention maybe!?
But the methode requires to have the phone working???
Or am i wrong?

[Q] First blue screen, now boot loop.

Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.

Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?

Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.

Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]

I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.

PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)

Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)

Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.

just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..

Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.

hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!

Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started

i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off

astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??

Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little

U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App

all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^

How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link

Looks like you are not having much luck. Did you try to factory reset?

astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much

DHD got bricked

I had Revolution HD rom or something like that don't remember it't long time it worked. One morning I woke up and my phone didn't respone. Yesterday everything worked..When i tried to boot current rom it stuck on HTC screen..Okay so I decided to flash new rom because recovery still work but I probably lost my root because it can't delete previous rom..Today after long time I decide to ask you what to do. When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..

DO you want help?I can help u if u only want it

Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!

Sleekykenny: Of course i want
I wiped everything but it writes error when I wipe system.

I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.

Same problem

Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.

markslo112 said:
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
Click to expand...
Click to collapse
You're right. When intalling a new ROM, the first boot is longer because the new one is building a new Dalvik cache and so on... depending of the release.
Be patient a bit more, then report ...

http://www.multiupload.com/AURLLESU5V
1. Download this file
2. Do not unzip this file
3. Store it on SDCARD
4. Power off your device
5. Keep press Vol-Down
6. Do not releas the vol down an press power on
7. Follow the instruction on the screen
8. Enjoy and be patient for 5 minutes
;-)
Sent from my HTC Desire HD A9191 using XDA App

After 1 hour waiting I decided to put battery out because it have no point

rostuli said:
.....When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
Click to expand...
Click to collapse
markslo112 said:
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Click to expand...
Click to collapse
jabs40 said:
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Click to expand...
Click to collapse
rostuli said:
Same problem
Click to expand...
Click to collapse
if you can get into your phone into hboot/recovery/fastboot then your phone is not a brick!
the problems with white htc screen is called a bootloop. like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
then disconnect phone from PC when that is complete and navigate to your recovery option. select the recovery option and then mount back to USB cable and select USB toggle option so you can data transfer to SD card.
put new rom you wish to use or redownload one you wanted. then try again

It's actually a splash loop, a boot loop is the boot animation. But you get the idea
Sent from my HTC Desire HD using xda premium

the only option i get when i get into fastboot from the phone is bootloader,reboot,reboot bootloader and power down. if i chose any of the above then they all go back Hboot menu. cannot get into menu to type in fastboot erase sytem -w. can u advise me on where is the menu?. or i'm i doing something wrong..
thanks.

rostuli said:
After 1 hour waiting I decided to put battery out because it have no point
Click to expand...
Click to collapse
I don't understand where u was waiting.
Can you describe what was happening?
Are you able to access the bootloader??

1. Pull out battery
2. Put in battery
3. Hold power + Volume Down buttons until inside bootloader UI
4. Use volume keys to navigate to the "Recovery" option then press the power key.
5. Once recovery has booted, use volume keys to navigate to the "Factory reset & wipe data" option, then press power key.
6. Reboot.
Results?

Had the same problem in the past.
I downloaded an RUU and managed to get my phone to boot normally.
Take a look on this:
http://forum.xda-developers.com/showthread.php?t=982783

Download RUU is a good idea I tried it, didn't work..In that post he said some asian worked but I can't get one anywhere.
I used the Asia_WWE_1.32.707
Click to expand...
Click to collapse
like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
Click to expand...
Click to collapse
Got part with fastboot but where am I supposed to write -w? I'm not that good in this that is why I ask here for help. But thanx anyway. And I tried wipe everything using recovery and when I wipe system writes error all the time.

I also tried all the above method but to no avail. Then a friend of mine bought the dhd so i made a goldcard from his phone loaded a pd98img.zip and flashed.. my dhd is back in action... i think this is your only solution, find somebody with the same phone. If u cant let me no i'll send you a gold card.

If it could help me than upload it somewhere And tell me how to use it. I heard about it but not sure.

You can remove your sd card then you will be able to choose the recovery option instead of it constantly going to hboot. The hboot looks for a file and asks you to instal or not install and then tells you to power of. Remove you sd card and you wont get this option so you can go into recovery and reflash a rom (you can re insert your sd card once in recovery and chose the mount option)

HELP!!! Phone not booting and vibrating continuously after short intervals

I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...

Abhishek Hamal said:
I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...
Click to expand...
Click to collapse
First of all " don't panic ", its nothing. First remove your battery and then insert it. Now press "VOL UP + VOL DOWN + POWER KEY" together and leave the " POWER KEY " once the lenovo logo shows up. You'll enter into recovery. Now, wipe the cache, dalvik and reboot. If still doesn't boot, then wipe data, android secure too (not system). This will surely do.
And, mention the error you faced while installing the new ROM, like Error 6 or anything. If you were on stock kk earlier, then to flash Lollipop ROMs, you'll have to flash stock LP ROM first.

sasukay said:
First of all " don't panic ", its nothing. First remove your battery and then insert it. Now press "VOL UP + VOL DOWN + POWER KEY" together and leave the " POWER KEY " once the lenovo logo shows up. You'll enter into recovery. Now, wipe the cache, dalvik and reboot. If still doesn't boot, then wipe data, android secure too (not system). This will surely do.
And, mention the error you faced while installing the new ROM, like Error 6 or anything. If you were on stock kk earlier, then to flash Lollipop ROMs, you'll have to flash stock LP ROM first.
Click to expand...
Click to collapse
I had tried that too. But the only response I get are those continuous vibrations. The screen does not light up at all. No, its not a display problem. I can't do anything with the phone, can't enter recovery. The only response to whatever I do plug in power supply, press the power key, press the key combination to go into recovery, plug into laptop and such are those vibrations.

Abhishek Hamal said:
I had tried that too. But the only response I get are those continuous vibrations. The screen does not light up at all. No, its not a display problem. I can't do anything with the phone, can't enter recovery. The only response to whatever I do plug in power supply, press the power key, press the key combination to go into recovery, plug into laptop and such are those vibrations.
Click to expand...
Click to collapse
Can you enter fastboot by pressing vol down + power key..?

No. I can't. As I said, the only response I get from the phone is those vibrations. No matter what I do.
Sent from my Micromax Q380 using XDA-Developers mobile app

Abhishek Hamal said:
No. I can't. As I said, the only response I get from the phone is those vibrations. No matter what I do.
Sent from my Micromax Q380 using XDA-Developers mobile app
Click to expand...
Click to collapse
Follow THIS TUTORIAL and first try the third method. If that doesn't work then try the second one.

sasukay said:
Follow THIS TUTORIAL and first try the third method. If that doesn't work then try the second one.
Click to expand...
Click to collapse
after vol down + Power connect with usb cable
dowload https://drive.google.com/open?id=0B8jgOvQH8xoaSDJ5RTQ2Qi1Ib0U
and run "fix brock device And Partations And every thing.bat"

Same problem with me, I was browsing facebook and suddenly my phone's screen blacks out. I can access recovery ,my device is detected by PC normally and can access all files, but display blacks out and I cannot see anything.
If I boot phone normally, It starts vibrating periodically. Maybe, because of Bootloops.
(Funny thing is, I can feel everything but cannot see anything on my phone)

Which version of Android was before?

sasukay said:
Follow THIS TUTORIAL and first try the third method. If that doesn't work then try the second one.
Click to expand...
Click to collapse
I am telling you, it's not working. Thanks for your help though.
Sent from my Micromax Q380 using XDA-Developers mobile app

Abhishek Hamal said:
I am telling you, it's not working. Thanks for your help though.
Sent from my Micromax Q380 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you installed the Qualcomm drivers mentioned in that post..? And was your device listed in Device Manager on pc, as "Qualcomm Predloader stuff..."... ??

I've experienced the same problem. I simply headed to the service centre ang got my display changed for free.(as under warranty)
Sent from my Lenovo A6000 Plus

in my experience, if your PC can recognize the device as qualcom.. you should go with the file.
if your device still vibrating countinuosly.. you should do test point
if test point not working. please go to lennove service center.

I also faced that problem when doing an ota update of MiUi and the I had to change the motherboard . Since it was under warranty I got it replaced for free.

did you got any solution
Abhishek Hamal said:
I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...
Click to expand...
Click to collapse
i am also facing same problem , after installing nought rom successfully , i rebooted but it doesnot boot nor going to recovery or download mode , earlier i have unbricked using qcom downloader 2 times succesfully. but this time it won't go to download or recovery mode, not dectecting on pc . Now is there any solution

I am facing exact same problem.... but no one does help .Did you find any solution?
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
aravindmj said:
I also faced that problem when doing an ota update of MiUi and the I had to change the motherboard . Since it was under warranty I got it replaced for free.
Click to expand...
Click to collapse
O MY GOD DONE EXACT SAME THING. How dumb I am. But there is no solution out there?, I don't want to pay the cost of the phone again for motherboard replacement

XTutorials said:
I am facing exact same problem.... but no one does help .Did you find any solution?
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
O MY GOD DONE EXACT SAME THING. How dumb I am. But there is no solution out there?, I don't want to pay the cost of the phone again for motherboard replacement
Click to expand...
Click to collapse
Don't know any other way bro!

aravindmj said:
Don't know any other way bro!
Click to expand...
Click to collapse

FIX!
I have found a way to unbrick the phone with these simptoms! Check my guide in the guides section!
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
aravindmj said:
I also faced that problem when doing an ota update of MiUi and the I had to change the motherboard . Since it was under warranty I got it replaced for free.
Click to expand...
Click to collapse
I HAVE FOUND A WAY TO UNBRICK THE PHONE WITH THESE SIMPTOMS! CHECK MY GUIDE IN THE GUIDES SECTION!
Too bad you replaced it. At least was in warranty

same problem
Abhishek Hamal said:
I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...
Click to expand...
Click to collapse
i'm also dealing with the same problem whether you fixed it or not if you did please tell me what to do????? plzzz help me....