I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
johnnyham89 said:
I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
Click to expand...
Click to collapse
You can try to turn the phone off as soon as you get the error when turning wifi on
And go into Recovery>Advanced >FIX PERMISSIONS
If kernel is compatible it should fix it for you
If not I suggest to find another Froyo Rom like Coredroid 1.6 or 1.7
All works there and it's also Themed so its an eyecandy it works with Hieros Kernel
johnnyham89 said:
I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
Click to expand...
Click to collapse
You need to find another kernel to use. The one you listed is for Gingerbread based ROMs and not Froyo based like Cmylxgos. Is there a problem with using the current Rafpinga 1.9 kernel associated with Cmylxgo's ROM? When I was on his ROM, I never had a issue with WiFi connectivity. I am now using Tytung's Nexus HD2 v3.0 ROM which is a Gingerbread ROM. No WiFi issues as well.
Related
I installed Mdeejay FroYo Sense Matted v. 1.4 the other day on my HD2 and it worked well
However 4 - 5 hours later I noticed my fone automatically restarted, why is that? My battery was at 80% so I thought nothing of it until 4 - 5 hours later when it happened again
Any ideas whats going on? and more importantly how I resolve it?
Thanks
P.S. I have posted twice in the development forum but have received no help
this usually happens when you are overclocked/undervolted and the phone cant handle it. First try disabling overclock and if the issue persists change to a non undervolted kernel.
btw you shouldnt be posting problems in the development section, just a heads up
First try disabling overclock and if the issue persists change to a non undervolted kernel
Click to expand...
Click to collapse
As far as I am aware I have never enabled overclock, where in the phone do I check to ascertain whether its enabled or disabled?
btw you shouldnt be posting problems in the development section, just a heads up
Click to expand...
Click to collapse
I never would have done so, but have waited 3 days, posted twice in the ROM section and failed to received any replies - thanks for your response and time
you can check weather your overclocked or not with setcpu here: http://forum.xda-developers.com/showthread.php?t=505419 and youre probably undervolted because your using the mdeejay kernel included in his roms (correct me if im wrong). Try a kernel from the autobuild here: http://oe.netripper.com/files/htcleo_autobuild_evo_tree/ they are not undervolted or overclocked.
JJbdoggg said:
you can check weather your overclocked or not with setcpu here: http://forum.xda-developers.com/showthread.php?t=505419 and youre probably undervolted because your using the mdeejay kernel included in his roms (correct me if im wrong). Try a kernel from the autobuild here: http://oe.netripper.com/files/htcleo_autobuild_evo_tree/ they are not undervolted or overclocked.
Click to expand...
Click to collapse
I'm also having this issue with Mccm v3.4 evo build Hastarin 8.5 kernel. Currently every feature is working, camera, camcorder,mms, stable data and more. If I switch kernels to the latest Nov 26 th kernel will I lose any features?
Sent from my HTC HD2 using XDA App
sorry for delay and thanks for your response,
which kernal do you recommend? is their a guide floating around on "how to update your kernal"
please help
thanks
Hey, quick question: I am on mytouch 4g cm7 ROM
What is a safe max to set the overclocking at? Obviously I don't want to burn the chip, but I want to make it as fast as possible. I have LauncherPro, currently my max is at 1.4, but sometimes it lags when I gesture to expand home screens.
I have 7 Home screens, all of them have 1 or more widget..
Thanks
1.5 is a good speed but you really wanna avoid charging when its set that high. so when charging set it to 1.2. Also what Kernel are you using? Defaults on Faux123 ASOP kernel should do well. I'n still on T-Mo stock and i run defaults with Faux123 Sense Kernel and i have no lag at all so CM7 whit its optimized code and no bloat it should run like a dream with one of his kernels, no OC Needed
Edit: corrected Link
http://forum.xda-developers.com/showthread.php?t=957267
Will the Kernel you linked to work with CM7 rc3? It only mentions CM6
Nm, Cm7 is the gingerbread...see it..got it, thanks!
I kept mine at 1.2ghz. Never gave me a problem.
sent from the rooty tooty fresh and fruity cm7 nighly powered G2
So I flashed 2.3.0 , then like the thread says, before rebooting, I flashed 2.4.3 stock version.
However, I am getting a wi-fi error. I saw some posts on it, and they said to "fix permissions". So I did that, yet still seeing a wi-fi error.
So for now, I restored my backup, but I would really like to have this kernel, do you know what I am doing wrong or what I can do to fix it?
Thanks
My mistake i linked the wrong Kernel here you go.
http://forum.xda-developers.com/showthread.php?t=957267
Yeah, I did use that link, however as described above, the wifi is giving me an error..any idea of a fix or what I am doing wrong?
I was getting the same issues. Then I reflashed the rom, rebooted before turning wifi on and had no problems. Also have had no problems set at 1.75 max and .75 min on minmax. Have been using that setting since faux started making his kernels (cm7 amd froyo based) and have never froze once. Quadrant scores for the new evil dhd ext 4 rom at 2900.
Sent from my HTC Glacier using XDA App
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
Hey,
im looking for some clean GB (2.3.4) ROM with CM7 & Rafpigna 1.9OC Kernel.
is there a good one? :/
or is there a way to implement the kernel into hyperdroid ?
thanks
kevin134 said:
Hey,
im looking for some clean GB (2.3.4) ROM with CM7 & Rafpigna 1.9OC Kernel.
is there a good one? :/
or is there a way to implement the kernel into hyperdroid ?
thanks
Click to expand...
Click to collapse
Hi,
Have you checked here:
http://android.hd2roms.com/
yes but theres often no kernel given :/ and the most popular builds arent not with the rafpigna kernel :/ dont know why :x
What is special about the rafpigna kernel? Just curious
I can tell you that using Rafpinga's kernel on the Hyperdroid build will force it into a bootloop and the ROM won't work. What I found that makes Rafpinga's kernel so special is on Cmylxgo's Desire HD(2) build it gave me the lowest stand by battery drains on my phone between 2-3mA. And without any peaks more than 11mA.
Hi, I've just installed the new tytung r12 kernel for use with my HyperDroid CM7 3.0.0 ROM and I can't select any other cpu governor than Interactive ... is this normal? I am only posting this question here 'cos I don't still have the 10 required posts to ask in the kernel or ROM thread and I can't find anyone reporting this issue on either....
rudeblunt said:
Hi, I've just installed the new tytung r12 kernel for use with my HyperDroid CM7 3.0.0 ROM and I can't select any other cpu governor than Interactive ... is this normal? I am only posting this question here 'cos I don't still have the 10 required posts to ask in the kernel or ROM thread and I can't find anyone reporting this issue on either....
Click to expand...
Click to collapse
Put the initrd.gz from HyperDroid ROM into kernel zip to /boot.
Thanks
Yay, it works... I can use the smartass governor again.
Thanks...
Do you have any threads detailing how to get the "sense" Hyperdroid look?
Thanks!