Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
Related
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Vylle said:
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
What speed are you trying to overclock it to?
trying to get t above stock.. i've tried 1036, 1190 all up to 1536. the result is the same, phone freezes, reboots constantly
try changing the kernel to something that allows overclocking
Richy99 said:
try changing the kernel to something that allows overclocking
Click to expand...
Click to collapse
By definition if he's able to set a clock higher than 998mhz then he's ALREADY running a kernel that allows overclocking, otherwise he wouldn't be able to change anything.
To the OP:- You may just be unlucky and have a phone that doesn't overclock well, the same as you would have on a computer. By all means try a different kernel, I find my phone is more stable at higher overclocks using MDJ's 10.4 kernel than anyone elses.
cobhc said:
By definition if he's able to set a clock higher than 998mhz then he's ALREADY running a kernel that allows overclocking, otherwise he wouldn't be able to change anything.
Click to expand...
Click to collapse
Yes, it's neccessary to have an overclockable kernel of your currently ROM for setting CPU frequency over 998MHz.
Vylle said:
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I got the same problem with my T-Mous HD2. I can't get stability on Android on any ROM and kernell. It become hot and freez. I changet kernells a lot. I had stability just on MDJ's SD early Rom.
I have no idea what to do...
T-Mous HD2+overclocking= epic fail
i should prob mention that its the TMous version that i'm rocking.. not sure if its directly related but w/e
i've tried sitching kernels before, but whenever i do the phone wont boot at all.. just goes into boot cycle. then again, i've only tried one (raf's kernel)so im not sure which one will work -_-
Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.
fragxion said:
Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.
Click to expand...
Click to collapse
Do you use under volting? Might be that what's causing the problems.
Sent from my HTC HD2 using XDA Premium App
hmm i don't know what under volting is.. so i think not hehe.
thanks for your fast reply bro!
So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App
fahd_freak said:
So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
yes.. working great..
at the moment i am running Rafdroid HD... runs on rafpigna 1.8
i think its strange.. don't know what to do
still haven't figured it out.. can someone help me?
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
MX6Booster said:
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
Click to expand...
Click to collapse
Is that a Sense ROM? If so, the latest Incredikernel's are for AOSP GB and AOSP Froyo ROM's. He has a Sense 2.2 kernel, but Incredicontrol won't work with it (I don't think so anyways...?).
You could try tiny's kernel, which is for Sense 2.3 ROM's, but I don't think he has the included items needed for Incredicontrol to work.
RMarkwald said:
Is that a Sense ROM? If so, the latest Incredikernel's are for AOSP GB and AOSP Froyo ROM's. He has a Sense 2.2 kernel, but Incredicontrol won't work with it (I don't think so anyways...?).
You could try tiny's kernel, which is for Sense 2.3 ROM's, but I don't think he has the included items needed for Incredicontrol to work.
Click to expand...
Click to collapse
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
jlokos said:
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
Click to expand...
Click to collapse
That is correct, it doesn't. I hope to be able to release it with that function sometime after the source drops though for the gingerbread kernel.
jlokos said:
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
Click to expand...
Click to collapse
Thank you for the correction. I knew something worked, and something didn't.
Sent from my ADR6300 using xda premium
MX6Booster said:
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
Click to expand...
Click to collapse
you said not ported? if you meant the kernel then there is no such thing for gingerbread yet that is custom.
Sent from my ADR6300 using Tapatalk
I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
johnnyham89 said:
I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
Click to expand...
Click to collapse
You can try to turn the phone off as soon as you get the error when turning wifi on
And go into Recovery>Advanced >FIX PERMISSIONS
If kernel is compatible it should fix it for you
If not I suggest to find another Froyo Rom like Coredroid 1.6 or 1.7
All works there and it's also Themed so its an eyecandy it works with Hieros Kernel
johnnyham89 said:
I have finally found the best mix of ROM and kernel but with one problem, wifi doesn't work. Whenever I try to go to turn it on it just says error and can't connect. The kernel that I am using is HierOS 1.7.5 kernel mainly because of the smartass governor v2 since overclocking no longer gets my cpu speed stuck at 384. The ROM I am trying to use it on is Cmylxgo's stock desire HD ROM.
Kernel:
http://forum.xda-developers.com/showthread.php?t=1233125
ROM:
http://forum.xda-developers.com/showthread.php?t=915159
Any help or workaround would be greatly appreciated. Thanks
Click to expand...
Click to collapse
You need to find another kernel to use. The one you listed is for Gingerbread based ROMs and not Froyo based like Cmylxgos. Is there a problem with using the current Rafpinga 1.9 kernel associated with Cmylxgo's ROM? When I was on his ROM, I never had a issue with WiFi connectivity. I am now using Tytung's Nexus HD2 v3.0 ROM which is a Gingerbread ROM. No WiFi issues as well.
hi can any1 suggest to Me a gaming rom for the nand build
please help. [-:
I would like to know this as well
Sent from my HTC Glacier using Tapatalk
chiikko561 said:
I would like to know this as well
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
I guess we are on the same lines I am going to try out [12 JAN][ Desire HD 1.84.661 .1 [Froyo v1.3 Rotation Sense][ Raf+Mde 1.9 OC] ill let u know if its good
If you want speed and performance, try cm7 roms. I would recommend Hyperdroid and Nexushd2.
yz.hd said:
If you want speed and performance, try cm7 roms. I would recommend Hyperdroid and Nexushd2.
Click to expand...
Click to collapse
+1 for hyperdroid , big fan of his latest work , with Dorimanx kernel im successfully OC'd to 1.6Ghz and games blaze on it . so far battery life is great too its very clean on first install i still removed a few stock apk's from the /system/app directory . but give Hyperdroid a try . it also boasts a HUGE customizeable aspect . I didnt care for NexusHD2 but it def was fast if thats what you want .
You can try Dorimanx-ROM-HIGH-END 3.0.7 with his 3.8 kernel its realy fast and quadrant scores are alwayes good
i would go with either lady's miui or tytungs aosp, or any of the cm7 roms. real fantastic.
good luck!