Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.
fragxion said:
Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.
Click to expand...
Click to collapse
Do you use under volting? Might be that what's causing the problems.
Sent from my HTC HD2 using XDA Premium App
hmm i don't know what under volting is.. so i think not hehe.
thanks for your fast reply bro!
So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App
fahd_freak said:
So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
yes.. working great..
at the moment i am running Rafdroid HD... runs on rafpigna 1.8
i think its strange.. don't know what to do
still haven't figured it out.. can someone help me?
Related
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Vylle said:
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
What speed are you trying to overclock it to?
trying to get t above stock.. i've tried 1036, 1190 all up to 1536. the result is the same, phone freezes, reboots constantly
try changing the kernel to something that allows overclocking
Richy99 said:
try changing the kernel to something that allows overclocking
Click to expand...
Click to collapse
By definition if he's able to set a clock higher than 998mhz then he's ALREADY running a kernel that allows overclocking, otherwise he wouldn't be able to change anything.
To the OP:- You may just be unlucky and have a phone that doesn't overclock well, the same as you would have on a computer. By all means try a different kernel, I find my phone is more stable at higher overclocks using MDJ's 10.4 kernel than anyone elses.
cobhc said:
By definition if he's able to set a clock higher than 998mhz then he's ALREADY running a kernel that allows overclocking, otherwise he wouldn't be able to change anything.
Click to expand...
Click to collapse
Yes, it's neccessary to have an overclockable kernel of your currently ROM for setting CPU frequency over 998MHz.
Vylle said:
Hey guys, im having an issue when trying to overclock using setcpu. Right no im using cmn 2.0 running on mgldr 1.13 and cwr 1.3 with the stock kernel. For some reason when trying to overclock the phone freezes and reboots to never get past loading the home launcher. I've tried using other kernels but those don't work.. can someone help me out..? Thanks in advance
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I got the same problem with my T-Mous HD2. I can't get stability on Android on any ROM and kernell. It become hot and freez. I changet kernells a lot. I had stability just on MDJ's SD early Rom.
I have no idea what to do...
T-Mous HD2+overclocking= epic fail
i should prob mention that its the TMous version that i'm rocking.. not sure if its directly related but w/e
i've tried sitching kernels before, but whenever i do the phone wont boot at all.. just goes into boot cycle. then again, i've only tried one (raf's kernel)so im not sure which one will work -_-
Rapier07 wrote:
Flashed yesterday.. First impression was good everything worked great.. Suddenly without any reason apps kept force closing(faced the same issue on indroid 2.0).. Switched off..when tried to turn on was stuck on gt-i5801 screen..couldn't get into recovery as well though could get into download mode..
Flashed again..didn't get any fc's so far..overclock works great.. didn't notice any lags..
Click to expand...
Click to collapse
I have the same problem. It happens only after rebooting or when i turn off and turn on phone back. But i have GT I-5800. I think it can not be a hardware problem, because on stock XXJPM it was ok. It can not be a OC problem too, i try both OC and non OC version and i have this problem on both version. Probably is something wrong with app2sd because i had the same problem on Kyrillos 4.0 and 4.1.
BTW, Great ROM and everything else working great on both OC and non OC versions.
Can anyone hlep me solve this?
^^
Bad apocalypse Take Kyrillos and custom your Theme
But i have same problem on Kyrillos rom. Is even worst than Apocalypse because my phone freezes on Kyrillos rom OC or non OC.
And yes i try to flash rom couple of times but this not help.
Sent from my GT-I5800 using XDA App
cop1976 said:
I have the same problem. It happens only after rebooting or when i turn off and turn on phone back. But i have GT I-5800. I think it can not be a hardware problem, because on stock XXJPM it was ok. It can not be a OC problem too, i try both OC and non OC version and i have this problem on both version. Probably is something wrong with app2sd because i had the same problem on Kyrillos 4.0 and 4.1.
BTW, Great ROM and everything else working great on both OC and non OC versions.
Can anyone hlep me solve this?
Click to expand...
Click to collapse
i had the same problem too..
so i'm just avoiding the apps2sd..
one more problem..
phone gets bricked if you try to install apps when internal memory is less than 50 mb.. anyone else got this problem??
having this problem since beta 1 uptill beta 3 OC (didn't try non OC though)
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
as above
i recently upgraded to 2.3.4 and it sometimes turns itself off and reboots while in standby.
any ideas, thanks
Did you tried reflashing? Maybe that solves it...
Another idea is to try a different ROM...
Thanks. i may have to, was using darkys 10.1 might go back to it
This is a common issue with GB roms (stock and custom). there is another post with a poll on the first few pages. Maybe add your feedback there.
G
I have got the same Problem. Now i have f1 V6 rom with Gakaxian Kernel. All problems are gone.
Sent from my GT-I9000 using XDA App
Well the problems generally take 3-5 days to start, has it been that long?
Sent from my GT-I9000M using XDA Premium App
thanks guys.
rebooting problem is getting worse, whats the best rom for my gt i9000
I experienced this problem as well. Now I'm running stock JVQ with Galaxian kernel @ 1.2Ghz. Not happened to me since then.
maybe hardware wrongs
Hi.
I cant seem to get my girlfriends wildfire to accept a overclocked kernel after i used Alpha´s new s-off tool, and rooted it. No matter what kernel i use, it never starts up, it hangs very long time at the screen, HTC makes it quietly (or something) and then i restarts?
Any suggestions?
And no, she dosent want CM, she wants sense :-(
Cheers and thx for helping.
Brian
BrianMarkussen said:
Hi.
I cant seem to get my girlfriends wildfire to accept a overclocked kernel after i used Alpha´s new s-off tool, and rooted it. No matter what kernel i use, it never starts up, it hangs very long time at the screen, HTC makes it quietly (or something) and then i restarts?
Any suggestions?
And no, she dosent want CM, she wants sense :-(
Cheers and thx for helping.
Brian
Click to expand...
Click to collapse
try max @691 cos mine cant work fine when over that
luxandroid said:
try max @691 cos mine cant work fine when over that
Click to expand...
Click to collapse
There might be a problem with that....he can't even BOOT.
nejc121 said:
There might be a problem with that....he can't even BOOT.
Click to expand...
Click to collapse
then only one solution I belive ,reflash rom...then be easy on oc,step by step and nex time skip to sheck "set on boot option,then if it freezes it will boot stock @528 and you wil know what is max Mhz you can set, good luck
There's another problem with your idea...
Whenever he flashes a OC Kernel he's bootlooping.
he should post what rom is he trying to oc then we will be smarter I belive,like this its just guesing... right
Edit:when he reflash rom he will be able to BOOT right?
Guessing from the fact he mentioned HTC Sense, I'm presuming he's using stock.
And yes, it should since ROMs install a new Kernel.
should use custom sense based rom, not the stock
There's only one person that can tell us that *cough*
just trying to help,since he cant get oc on stock rom with any oc kernel...custom rom is logic idea i belive
That's true.
And if his GF is not so technologically interested she wouldn't notice the difference between stock or WildPuzzle ;D
Have you tried HCDR.kernel v4.2. It can be flashed on any wildfire rom.
Personally tried it on stock 2.2.1 (after alpharevx s-off) without any issues.
Link here: http://forum.xda-developers.com/showthread.php?t=798471
You further need an overclocking app like set cpu. If facing any issues, format the phone and make a clean install. Still facing issues, go with a sense custom Rom which already has inbuilt oc kernel.
Sent from my HTC Wildfire using XDA App
Hi guys, sorry for not answering, but i live in Denmark and its now 10 o´clock in the morning, i posted just before midnight.
She is using stock rom 2.2, and i have tryed the wildpuzzle and i didnt think it was smooth, it gave her errors, and then she complained :-(
I have tryed theese kernels:
oc-kernel-2.6.32
oc-kernel-2.6.32 v2
Hcdr.kernel_4.2b_flashable
Could there be a recovery version issue, using 2.5.0.7, just wild gues?
Thx for helping me out.
Brian
Well you can only flash Kernels with 2.5
Have you tried other Sense based roms?
(DK custom or JokerDroid (has a different theme then stock))
Hi.
Yes i have tryed those, but she is not like me, she wants a phone that is working 100%, me i dont care, i work on my legend all the time.
So the fact that she wants a phone that is working 100% made me stay on stock and try to renew the kernel, but isnt working the way i want it to.
Maybe i shold try a clean install og stock, and then the kernel
Tryed again, fresh stock rom, still no good.
Jokerdroid 4.2 worked, lets se her reaction
Thx for helping.
Brian