Database Users

Overclocking hd2??

So, I just picked up my hd2 yesterday and I'm currently running CM7. Its not letting me use set CPU to overclock.. Im used to my mt4g being rooted and allowing me to overclock, but do I need to somehow root my hd2? I have clockworkmod so you would think Im already rooted?
Sent from my HTC HD2 using XDA App

I believe it's more of a kernel issue. Try a different ROM.
I think Tytung's kernel let's you OC to 1190mhz.

[Q] Overclock..

Hi,
I flashed the non-OC version of Kyrillos` ROM because my phone freezed with the other..
Is there a method to overclock my phone or is it gonna freeze anyway?
DoinG!
Sent from my GT-I5800 using XDA App

DoinG! said:
Hi,
I flashed the non-OC version of Kyrillos` ROM because my phone freezed with the other..
Is there a method to overclock my phone or is it gonna freeze anyway?
DoinG!
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
I think no.....I have the same problem with overclock...I tried many methods but it don´t work anyway....

DoinG! said:
Hi,
I flashed the non-OC version of Kyrillos` ROM because my phone freezed with the other..
Is there a method to overclock my phone or is it gonna freeze anyway?
DoinG!
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
I had freezing issue's with the BE (whats used in kyrillos's rom, though the version in his rom may be newer) but I didnt have freezing issues with the apocalypse beta3 OC version, so you could try that out if OCing is very important to you

Ok thx.
I'm gonna try the Apocalypse ROM. : )
Just one more question. Do I have to remove my partitions first?
DoinG!

DoinG! said:
Ok thx.
I'm gonna try the Apocalypse ROM. : )
Just one more question. Do I have to remove my partitions first?
DoinG!
Click to expand...
Click to collapse
Partitions? No.

I could be wrong, but being a veteran overclocker of desktop CPU's, I know that some processors don't overclock as well as some else might, so one thing you could try is set a lower speed, like 1200mhz. Or start from 667 increasing 100 at a time and running a quadrant each time until It's not stable anymore (eg. freezes).

Thom47 said:
I could be wrong, but being a veteran overclocker of desktop CPU's, I know that some processors don't overclock as well as some else might, so one thing you could try is set a lower speed, like 1200mhz. Or start from 667 increasing 100 at a time and running a quadrant each time until It's not stable anymore (eg. freezes).
Click to expand...
Click to collapse
This has been floating around here too, together with the trying different frequencies (end users cant really try 100 at a time, since they dont change the kernel, only 667 833/866 1000 and 1.3ghz unless other values have been added that i am not aware of). I know I had problems with one OCed kernel (regardless of how much I OCed) but didnt have problems with another, so the OC method might have something to do with it (reverse engineering vs sources or stuff like that). It's usually not that easy (or well documented/something similar that my brain cant verbalize atm) to overclock a phone as it is to overclock a desktop.

Yeah, I know It's nothing like overclocking a desktop CPU, but the bottom line is they're both processors and components that work the same way.

Set the min and max frequency the same, it worked for me
Sent from my Kyrillos Ultimate Edition 1.3Ghz GT-I5801

Hi
Download ADB
adb push fs.convert /sdcard/android/data/fugumod/fs.convert

But if you set the same value for min and max your battery life will decrease drammatically....... min frequency is very important when the phone is idle.....

Overclocking got a bit mystic for me I tried the Apocalypse and Kyrillos ROMs with OC. Could not get a stable work from them. Tried changing the frequencies (min and max) and all sort of stuff, but nothing helped. TouchWiz was periodicaly freezing, on big apps like Angry Birds the phone would just hang up and I had to reboot.
Being tired of that, I flashed a stock ROM (being XWJPE for Ukraine), rooted it, and then flashed FuguMod Kernel 2.3. Works fine for me. No freezes, no hang ups, and I didn't have to mess with the frequencies. I suggested anyone who can not get a Custom OC ROM to work properly, to try doing it manualy on a clean stock ROM.
Good luck!

Hi,
sorry to resurrect quite an old post, but i would like to know which (free) app you guys use to manage cpu frequency. I tried some but it was either over-complex or not working decently (not detecting non-extreme frequencies).
I am using kyrillos 5.0 and it looks like my phone is going to 1300 MHz as soon as i ask it anything...

SetCPU is the only one i know^^
Sent from my GT-I5800 using XDA App

CPU master free.
Sent from my GT-I5800 using XDA App

dilzo said:
CPU master free.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Ok, i'll try this one for a few days, thanks !

can anyone help me??? i am using apps2sd mad team..n in settings>sd & phone memory it shows 6.49 gb instead of 7.49..that is because i partioned it...but in titanium backup it shows
internal: 201 MB
SD Card: 6.49gb
sd card(a2sd):219mb
why is this happening ..i have tried several times..everything goes right n i partion the sd card even but cant see it in titanium backup..help would be appreciated...n also do i have to convert..?? i am on indroid 4..and i did not flash any kernel..

[Q] Kernel Problem?

Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.

fragxion said:
Hey Guys,
Lately I've been having problems with some of the newer HD2 roms. The problem is that my phone freezes after a couple of minutes using a rom. (screen just freezes and turns black, after few seconds phone reboots).
I 'think' these problems occurred when the new Rafpigna 1.9 kernel was released. I think Rafpigna 1.9 isn't compatible with my HD2.
For example:
I tried Coredroid witch comes with kernel 1.9. After installation phone boots ok but after a few minutes phone freezes. The problem could be solved by flashing the older Kernel 1.8 and the rom worked perfect.
However, with the new gingerbread Sense roms (like imilka's roms) this solution isn't working. I tried flashing other kernels but phone always reboots after few minutes.
Could it be the problem that older kernels are not Ginger Sense compatible? If so.. could someone direct me to other Ginger Kernels so i could try to flash them.
or if there is an other solution.. please tell
thanks in advance.
Click to expand...
Click to collapse
Do you use under volting? Might be that what's causing the problems.
Sent from my HTC HD2 using XDA Premium App

hmm i don't know what under volting is.. so i think not hehe.
thanks for your fast reply bro!

So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App

fahd_freak said:
So Roms with different kernels are working???
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
yes.. working great..
at the moment i am running Rafdroid HD... runs on rafpigna 1.8
i think its strange.. don't know what to do

still haven't figured it out.. can someone help me?

[KERNEL] Best kernel for HD2 NAND

Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!

Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.

@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...

yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??

And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.

Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App

No problem here on tytung r10
Sent from my HTC HD2 using XDA App

Same here, tytung r10 is working great for me

Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?

abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.

I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14

ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??

Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App

Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.

Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App

abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.

Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App

How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App

abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.

The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel

[Q] No OC after s-off

Hi.
I cant seem to get my girlfriends wildfire to accept a overclocked kernel after i used Alpha´s new s-off tool, and rooted it. No matter what kernel i use, it never starts up, it hangs very long time at the screen, HTC makes it quietly (or something) and then i restarts?
Any suggestions?
And no, she dosent want CM, she wants sense :-(
Cheers and thx for helping.
Brian

BrianMarkussen said:
Hi.
I cant seem to get my girlfriends wildfire to accept a overclocked kernel after i used Alpha´s new s-off tool, and rooted it. No matter what kernel i use, it never starts up, it hangs very long time at the screen, HTC makes it quietly (or something) and then i restarts?
Any suggestions?
And no, she dosent want CM, she wants sense :-(
Cheers and thx for helping.
Brian
Click to expand...
Click to collapse
try max @691 cos mine cant work fine when over that

luxandroid said:
try max @691 cos mine cant work fine when over that
Click to expand...
Click to collapse
There might be a problem with that....he can't even BOOT.

nejc121 said:
There might be a problem with that....he can't even BOOT.
Click to expand...
Click to collapse
then only one solution I belive ,reflash rom...then be easy on oc,step by step and nex time skip to sheck "set on boot option,then if it freezes it will boot stock @528 and you wil know what is max Mhz you can set, good luck

There's another problem with your idea...
Whenever he flashes a OC Kernel he's bootlooping.

he should post what rom is he trying to oc then we will be smarter I belive,like this its just guesing... right
Edit:when he reflash rom he will be able to BOOT right?

Guessing from the fact he mentioned HTC Sense, I'm presuming he's using stock.
And yes, it should since ROMs install a new Kernel.

should use custom sense based rom, not the stock

There's only one person that can tell us that *cough*

just trying to help,since he cant get oc on stock rom with any oc kernel...custom rom is logic idea i belive

That's true.
And if his GF is not so technologically interested she wouldn't notice the difference between stock or WildPuzzle ;D

Have you tried HCDR.kernel v4.2. It can be flashed on any wildfire rom.
Personally tried it on stock 2.2.1 (after alpharevx s-off) without any issues.
Link here: http://forum.xda-developers.com/showthread.php?t=798471
You further need an overclocking app like set cpu. If facing any issues, format the phone and make a clean install. Still facing issues, go with a sense custom Rom which already has inbuilt oc kernel.
Sent from my HTC Wildfire using XDA App

Hi guys, sorry for not answering, but i live in Denmark and its now 10 o´clock in the morning, i posted just before midnight.
She is using stock rom 2.2, and i have tryed the wildpuzzle and i didnt think it was smooth, it gave her errors, and then she complained :-(
I have tryed theese kernels:
oc-kernel-2.6.32
oc-kernel-2.6.32 v2
Hcdr.kernel_4.2b_flashable
Could there be a recovery version issue, using 2.5.0.7, just wild gues?
Thx for helping me out.
Brian

Well you can only flash Kernels with 2.5
Have you tried other Sense based roms?
(DK custom or JokerDroid (has a different theme then stock))

Hi.
Yes i have tryed those, but she is not like me, she wants a phone that is working 100%, me i dont care, i work on my legend all the time.
So the fact that she wants a phone that is working 100% made me stay on stock and try to renew the kernel, but isnt working the way i want it to.
Maybe i shold try a clean install og stock, and then the kernel
Tryed again, fresh stock rom, still no good.
Jokerdroid 4.2 worked, lets se her reaction
Thx for helping.
Brian