Related
We'll, since heros thread kees getting closed before I can post my review ill make my own thread.
First the battery life is deff better than stock. I am currently running 1.4 ghz with no issues at all. I flashed this rom with the latest cwm and it worked perfectly. The phone is very fast, asv I got m first 10.0 with linpack. Also every quadrant score is 1k+.
If you have any questions about my experiance with this rom, ask here. Mods, please don't close my thread. Lol;-)
monadzback said:
We'll, since heros thread kees getting closed before I can post my review ill make my own thread.
First the battery life is deff better than stock. I am currently running 1.4 ghz with no issues at all. I flashed this rom with the latest cwm and it worked perfectly. The phone is very fast, asv I got m first 10.0 with linpack. Also every quadrant score is 1k+.
If you have any questions about my experiance with this rom, ask here. Mods, please don't close my thread. Lol;-)
Click to expand...
Click to collapse
For one, you're in the wrong forum. This isn't development, at all.
Second, I'm still dubious about the 1.4Ghz. My kernel gives 10 on Linpack without *too* much difficulty. Quadrant scores are also on par, and my kernel only runs at 1.2Ghz.
Third, they closed his thread because he's asking for donations to download it.
Your kernel broke my root sir. Please move this to the correct forum as I posted it in the wrong area
monadzback said:
Your kernel broke my root sir. Please move this to the correct forum as I posted it in the wrong area
Click to expand...
Click to collapse
same, i lost root once i flashed his kernel, had to flash to something else to regain root
rockethot said:
same, i lost root once i flashed his kernel, had to flash to something else to regain root
Click to expand...
Click to collapse
who is "his" lol there are two "his's" mentioned: hero and Geniusdog254
donateware sucks, wish he did it like flipzmode and do his donations outta the way
http://imgur.com/VrkT3.png
http://imgur.com/EnSXI.png
http://imgur.com/nd885.png
http://imgur.com/7hWAF.png
http://imgur.com/KDeOa.png
http://imgur.com/BZ4JB.png
good luck 56k!
some pictures and benchmarks (I was too lazy to cherrypick benchmarks, was first try with most tasks killed and mhz at max)
this is with blue minimalist lock, haven't had anything crash.
i am running mixup kernel with noobnl's rom with raidereps blue them on top of it and i have no issues with anything, it runs fast and smooth
**edit**holy crap dude you should post thumbnails, with so many pics loaded anyone on lower internet speeds this thread is going to suck...
shabbypenguin said:
**edit**holy crap dude you should post thumbnails, with so many pics loaded anyone on lower internet speeds this thread is going to suck...
Click to expand...
Click to collapse
yeah i edited them into links, click at your own risk!
i cant respect anyone that uses Task Killer
sdotkumar said:
http://imgur.com/VrkT3.png
http://imgur.com/EnSXI.png
http://imgur.com/nd885.png
http://imgur.com/7hWAF.png
http://imgur.com/KDeOa.png
http://imgur.com/BZ4JB.png
good luck 56k!
some pictures and benchmarks (I was too lazy to cherrypick benchmarks, was first try with most tasks killed and mhz at max)
this is with blue minimalist lock, haven't had anything crash.
Click to expand...
Click to collapse
I get 1039 quadrant and about 9.2-10.1 linpack with the rom described in my signature... And I'm clocked at 1.2 with 100 min 1200 max zero problems whatsoever
Sent from my Samsung Epic 4g flashed with custom rom AOSP Magic V2 OC (OVER CLOCKED TO 1.2 GHZ)
265ada said:
I get 1039 quadrant and about 9.2-10.1 linpack with the rom described in my signature... And I'm clocked at 1.2 with 100 min 1200 max zero problems whatsoever
Sent from my Samsung Epic 4g flashed with custom rom AOSP Magic V2 OC (OVER CLOCKED TO 1.2 GHZ)
Click to expand...
Click to collapse
Hey! Thats my kernel
Geniusdog254 said:
Hey! Thats my kernel
Click to expand...
Click to collapse
Im sure its a good kernel. But when I flash it I lose root. Baked snack runs like a champ
Uhm
monadzback said:
Im sure its a good kernel. But when I flash it I lose root. Baked snack runs like a champ
Click to expand...
Click to collapse
I flashed the kernel and didn't loose root my steps to my phones current setup are as follows
ran oden returned to stock
OTA d107
rebooted
ran 2.24 auto rooter thats stickied
reboot auto by root method
ran clock work flasher installed clock work
installed Genious's kernal
wipe cache and data formated before installing AOSP magic OC rom
I never did loose root in this process cause I am currently rooted and I performed the above steps!
monadzback said:
Im sure its a good kernel. But when I flash it I lose root. Baked snack runs like a champ
Click to expand...
Click to collapse
i had the same problem with his kernel, i think what happened was that his kernel does not have root incorporated into it (completely a guess and not based on anything lol) so if your rom didnt have the su binaries in it then you would lose root, what ended up working for me was to download the superuser app, update the su binaries and then flash the kernel
As respect to the GPL, please upload it somewhere so people can have a go at it. Paying for open source software is wrong.
aim1126 said:
i had the same problem with his kernel, i think what happened was that his kernel does not have root incorporated into it (completely a guess and not based on anything lol) so if your rom didnt have the su binaries in it then you would lose root, what ended up working for me was to download the superuser app, update the su binaries and then flash the kernel
Click to expand...
Click to collapse
Actually, I think i figured out the main issue was I was using the old root in my initramfs. The next version (release tomorrow or sunday, lots of awesomesauce included) fixes all that and improves performance & battery
kain203 said:
As respect to the GPL, please upload it somewhere so people can have a go at it. Paying for open source software is wrong.
Click to expand...
Click to collapse
We want source!
Sent from my Epic 4G
dudedude987 said:
i cant respect anyone that uses Task Killer
Click to expand...
Click to collapse
What is wrong with task killer? Sorry if this is a noob question but Im only two weeks into my epic and have never tried flashing or rooting before with my Moto Droid but boy is this fun
Geniusdog254 said:
Actually, I think i figured out the main issue was I was using the old root in my initramfs. The next version (release tomorrow or sunday, lots of awesomesauce included) fixes all that and improves performance & battery
Click to expand...
Click to collapse
I used your kernel and it was flawless!!!...but I'm a noob and adventurous and thought I'd flash Baked Snack and have had no issue with that either!! Both are ridiculously fast, but am leaving Baked Snacks for a while just cause its new and I have it OC'ed at 1.4ghz(bragging rights amongst friends)
Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
i want to apply voodoo sound patch on stock kernel.....
coz in my opinion.. stock kernel is much more lagfree thn OC kernels...
only thing i want is voodoo sound on stock kernel...
how to do it...?
+1 your right abt the stock kernel
188 views and 1 reply.... :-O
ashu007 said:
188 views and 1 reply.... :-O
Click to expand...
Click to collapse
188 views and no reply coz people are getting misguided by your subject. They are thinking that u have done some developement.
You need to recompile the stock kernel with the voodoo files, this is dev section, and this thread belongs to general
I think the voodoo control plus app patches the kernel automatically, doesn't it?
I don't know, cuz I've never played with the stock firmware, I flashed my G3 almost half an hour after i took it off the box!
cdesai said:
You need to recompile the stock kernel with the voodoo files, this is dev section, and this thread belongs to general
Click to expand...
Click to collapse
How can u in one sentence say that this 'is' development (compile kernel) and this belongs to general section?
SRT_ said:
I think the voodoo control plus app patches the kernel automatically, doesn't it?
I don't know, cuz I've never played with the stock firmware, I flashed my G3 almost half an hour after i took it off the box!
Click to expand...
Click to collapse
Voodoo plus app does load a kernel module that is compiled for sgs, so it wont run on sg3
----------------------------------------
tapatalked
I suggest looking at the GIT repos for G3MOD or Fugumod to find how it was done originally. Hopefully when we get a chance we will develop the kernel development thread more.
Also what do you mean by 'getting more lag in OC kernels'? If you have a problem with them then shouldn't you make the developers aware of the situations so they can fix it?
@all:
check my thread in general section...
its been a week since i've created thread there and haven't got any reply....
so i created this thread in dev section....
@hillbeast:
i was using OC kernel frm very long time.... nd got used of little lags n freezes... so never bothered to report these minor bugs...
bt now when i m using stock kernel, i realised tht OC kernels are still very far frm stock kernel in terms of smoothness...
ashu007 said:
i want to apply voodoo sound patch on stock kernel.....
coz in my opinion.. stock kernel is much more lagfree thn OC kernels...
only thing i want is voodoo sound on stock kernel...
how to do it...?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=17899758#post17899758
ashu007 said:
@hillbeast:
i was using OC kernel frm very long time.... nd got used of little lags n freezes... so never bothered to report these minor bugs...
bt now when i m using stock kernel, i realised tht OC kernels are still very far frm stock kernel in terms of smoothness...
Click to expand...
Click to collapse
Which kernel, and what settings? You might have had a kernel with an overclock too hgih for your phone to handle. Not every phone can handle the overclocks set up in the kernels. You sometimes need to dial it back a bit.
ashu007 said:
@all:
check my thread in general section...
its been a week since i've created thread there and haven't got any reply....
so i created this thread in dev section....
@hillbeast:
i was using OC kernel frm very long time.... nd got used of little lags n freezes... so never bothered to report these minor bugs...
bt now when i m using stock kernel, i realised tht OC kernels are still very far frm stock kernel in terms of smoothness...
Click to expand...
Click to collapse
stock kernels also stuck..
but i m unfortunate tht my cell dont support OC kernel it got stuck..
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
i dont think so
perri.etb said:
I guess it's your device because I have used both benchmarks with gl notecore extreme and everything went all right.
I'm using v8 with criskelo's rom v10
Click to expand...
Click to collapse
Even i thought so at first but then why does other overclocking kernel work then and also once in the blue moon the overclocked gl notecore had worked suddenly but since then it has not. Please someone help me out.
Husson_Ally said:
please guys i dont know is it normal or not so let me know that why does it always gets stuck on 3d tests while performing any benchmark using any of the overclocked versions gl notecore kernel. I really like that kernel but also do want some overclocking but whenever i try doing benchmark test using the extreme versions it gets stuck on the earth and moon rotation animation-testing screen and on antutu on the screen where battalion army animation is shown.
I have tried v2, v4, v5 v6 and till v8 extreme versions(overclocked) of gl notecore kernel. Tried and tested on rocket rom v7, kindroid v4.2 v4 3 and v5.1.1 also on latest and greatest clean note v4 but everytime it got stuck. It never happened to me on overclocked franco's kernel r5 nor did it ever happened on any cm9 or aokp roms while running anidroid kernel. So guys if you can help me out your help would be really appreciated
Thanks in advance.
Click to expand...
Click to collapse
Delete ypur init.d folder....
I face this similar issue. May be the EX version is not for us.
lifehijack said:
I face this similar issue. May be the EX version is not for us.
Click to expand...
Click to collapse
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
i tried it all
androiadicted said:
Delete ypur init.d folder....
Click to expand...
Click to collapse
Yes i already checked for that folder in system/etc but i cant locate one.
androiadicted said:
For me it is, just use his rom. No tweaks that will conflict his kernel. Using now his rom and his beta 8.2 at full speed.
Not a single sod ore freez. Antutu 7300, quadrant 5300.
Please if you use a custom rom, delete all init.d. Those are his words. You can find it in system,etc,init.d
Click to expand...
Click to collapse
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Husson_Ally said:
Yes i already checked for that folder in system/etc but i cant locate one.
By his rom do you mean cleannote v4 as it is the current rom im running. Also i checked for that folder but it is already not present there. Also now i have noticed that on his v8.1ex version i get screen freezes while running quadrant which only way to get rid off is restart the phone. Im loving his kernel guys its extremely smooth but just help me out with this problem as i wanna flaunt its performance through technical data. Lol
Thanks for your support guys.
Click to expand...
Click to collapse
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
no results.
androiadicted said:
Well some phones do not like oc and uv. You should do a clean install and do not restore apps and system with tittanium backup.
First test your cleanote without your apps. i use nofrills for to set my cpu. Do not use set cpu because many users experiance problems with that.
Good luck
Click to expand...
Click to collapse
Hey mate i have already done as you said. I have not restored any app through titanium back up. Infact i do not have titanium even installed on my note on cleannote v4. There is no set cpu installed too. Btw i tried with no frill but still no luck.
One tiny little request if you can will you post the link of this thread on galvin's kernel thread so that might be able to help me as of right now im veey junior member so according to xda rules i cant.
Thanks for your time buddy.
Hi, as you requested, he did post your thread link over at the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
thanks guys
lifehijack said:
Hi, as you requested, he did post your thread link over at
the NOTECORE kernel thread. However, as I mentioned above, I m facing the same issue and have read the kernel developers answer on this as well. Acc to him, not every phone can support the EX version. Its due to the difference in voltages. My phone cannot handle the EX version as well. However, I m happy to stick with the Standard version. If you're looking for great Quadrant and Antutu scores, just change the governer to pegasusq using SetCPU or any similar app, uncheck Power saving option and then run the test couple of times. I always get around 4400 Quadrant and 7100 Antutu scores.
Click to expand...
Click to collapse
Thanks to all of you guys for your wonderful support and help throughout. oh so atleast now i know whats the reason for that thanks anyways lifehijack and yeah i hit the thanks button for all of you.
Also many thanks for posting this link on gl notecore kernel thread
So is there anyways we could play around with these voltages and make it work. May be some technical experts here might have the answer to that i hope.
Im using notecore 8.1 ex with classic rom v3 and they both run fine have got pretty good scores too.
Sent from my GT-N7000 using xda premium
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
lifehijack said:
All you need is the setCPU app (search in xda forums,you'll find it) and change the governer from ONDEMAND to pegasusq, that's it.
Click to expand...
Click to collapse
Yes bro i have done just the same as an alternative to ex version and it gives onsiderable performance and scores but will always have a craving for extreme version. Hope to get some technical help from xda experts to make ex version run on my note just fine.
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
g.lewarne said:
As has already been mentioned not all phones are equal. your needs more core voltage than what my extreme kernel is configured for. if i increased it you would then complain about heat and battery life getting worse.
Stick with my standard version as that uses stock cpu voltages and frequencies. If you took the time to read the OP and even the last few pages of the thread you would have seen this mentioned.
Click to expand...
Click to collapse
No bro im not like that complainbox guy. Anyways i dunno why and how or may be you read this post and improved it in your version 9 ex but now your ex v9 works perfectly fine on my note and yes buddy i have read your op around 4 to 5 times and everytime i install your newer version of kernel. And i wanna give you a big thank you for making us soo many wondeful kernels. Your are awesome mate.
I actually cant believe that such a wonderful and big developer came to my thread to help. Once again thanks alot and also a big thanks to androiadicted for posting this link on galvin's thread.
altae said:
You can use tegrak to adapt the frequency and the voltage. This way you can set the frequencies that suit best for your phone.
Sent from my Galaxy Note running ICS
Click to expand...
Click to collapse
Thanks for you advice mate ill check it out. Any recommended voltages and frequencies?
hi guys, i'm currently using NexusHD2 JellyBean rom. it can be overclocked up to 1.2ghz, but i saw on internet that with CM7 hd2 can be overclocked up to 1.5... i would overclock NexusHD2 JellyBean CM10.1 to 1.5ghz.. but i don't know how to... sorry for bad english
You need a kernel that supports overclocking to such frequency. I didn't overclock my HD2, and most times I used the kernel that came with the ROM and didn't bother to change.
Use the sticky in the NAND development section to look through kernels, and flash the one that has overclocking and works on your ROM.
Edit:
Here: http://forum.xda-developers.com/showthread.php?t=1322639 I think this should work for you, follow the instructions and, as always, make a back up. (Though if something ever happens, you'd just have to flash the stock kernel back but I'm telling you to back up to disclaim myself anything should happen to your device.)
Marvlesz said:
You need a kernel that supports overclocking to such frequency. I didn't overclock my HD2, and most times I used the kernel that came with the ROM and didn't bother to change.
Use the sticky in the NAND development section to look through kernels, and flash the one that has overclocking and works on your ROM.
Edit:
Here: http://forum.xda-developers.com/showthread.php?t=1322639 I think this should work for you, follow the instructions and, as always, make a back up. (Though if something ever happens, you'd just have to flash the stock kernel back but I'm telling you to back up to disclaim myself anything should happen to your device.)
Click to expand...
Click to collapse
does it work with jelly bean?? cause cm10.1 is jellybean...
louis94 said:
does it work with jelly bean?? cause cm10.1 is jellybean...
Click to expand...
Click to collapse
Apparently not, lol. I don't think it's possible then. That's the only kernel I knew which supported 1.5 GHz. Try and search for yourself, you may find.
Marvlesz said:
Apparently not, lol. I don't think it's possible then. That's the only kernel I knew which supported 1.5 GHz. Try and search for yourself, you may find.
Click to expand...
Click to collapse
i flashed this kernel, and it don't work :\
Marvlesz said:
Apparently not, lol. I don't think it's possible then. That's the only kernel I knew which supported 1.5 GHz. Try and search for yourself, you may find.
Click to expand...
Click to collapse
should I keep jelly beans on 1.2ghz, or should I install ICS on 1.6ghz?
I can't really tell you, because it depends solely on you.
Why not try both? You've tried JB on 1.2, backup and flash ICS with 1.6 and use it for a few days. See which one works best and use it. Good luck.
louis94 said:
hi guys, i'm currently using NexusHD2 JellyBean rom. it can be overclocked up to 1.2ghz, but i saw on internet that with CM7 hd2 can be overclocked up to 1.5... i would overclock NexusHD2 JellyBean CM10.1 to 1.5ghz.. but i don't know how to... sorry for bad english
Click to expand...
Click to collapse
well, in jellybean or ics, i think overclocking more than 1.2 ghz is very risky. rom developers remove this option aswell as kernel developers, because in those builds it may brick your phone
gilbert32 said:
.. because in those builds it may brick your phone
Click to expand...
Click to collapse
say wut? o:
May I know why/how?
@Marvlesz well, i'm not sure about what i said
but after gb, i've never seen an ics+ (or jb) build that has overclocking more than 1.2 ghz. gb used to have 1.6ghz AFAIR, but newer build are all 1.2 ghz and maximum. maybe it's related to HWA or such stuff
Edit: i just saw you posted about trying ICS with 1.6 , so nevermind about what i said
gilbert32 said:
@Marvlesz well, i'm not sure about what i said
but after gb, i've never seen an ics+ (or jb) build that has overclocking more than 1.2 ghz. gb used to have 1.6ghz AFAIR, but newer build are all 1.2 ghz and maximum. maybe it's related to HWA or such stuff
Edit: i just saw you posted about trying ICS with 1.6 , so nevermind about what i said
Click to expand...
Click to collapse
I flashed ics 4.0.4 and 1.6ghz kernel... it does not works.. max frequancy is 1.19ghz
Damaged