Database Users

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!

it write me as i recall
it wrote me if i recall right :
INVALID MODEL ID

did you install HSPL before trying to install the ROM?

no i didnt try to install anything !
no i didnt try to install anything ! , just started the intallation file ROM arabic-english , and did what i asked to do !

if i didnt install hspl what can i do ?
can i take the device to the shop i bought it from and use the warranty ?

well, no...did you get the file from HTC direct or off here? your phone could be vendor locked to your provider so if you can get the original ROM that was on your phone you can flash that back on...
you should really read into things before jumping in at the deep end...

well i have an inlocked device ...
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !

you need the original ROM and a connection to your PC. run activesync as even not working it should connect up...

no there is no connection the device centre says not connected
the phone is not responding and the pc doesnot establish connection with it , i am stuck with loading menu with the R 2.04.50.22~2
G 15.26.50.070
D 1.43.7024
from there nothing moving , if i do soft reset it , it stucks again in the same menu !!!
i didnt install HSPL , and i guess i tried to install not the correct region ROM upgrade , the phone was purshased in lithuania , but htc offerd me middle eastern ROM because i want the arabic - hebrew support !
plz help

You could try installing the Shipped ROM via microsd card method. Just make sure your battery is above 50%. then follow these steps:
1. Using 7Zip, Open your Shipped ROM.exe (You need your exact shipped ROM for this, anything else will give you the error you got)
2. Look for the "RUU_signed.nbh" (without the quotes)
3. Copy RUU_signed.nbh to your microsd card AFTER formatting the microsd as FAT32 (quick format works well enough, using Win 7)
4. Rename 'RUU_signed.nbh" to "LEOIMG.nbh" (again, without the quotes)
5. Take out the HD2 Battery and insert microsd card in slot.
6. Put Battery Back on and hold the "Vol Down" key while pressing the Power key
7. Follow the instructions on the screen... (remember you need at least 50% battery power just to make sure everything goes as planned)
8. Soft Reset after your done and you have a "Fresh" Shipped ROM on your HD2!
Optional:
9. Install HSPL (use the guide that's been stickied in the ROM Dev Section)
10.Flash the ROM of your choice via MicroSD method or activesync (again, please read the Stickied guides in the ROM Dev Section)
Good Luck!

total storage 328 instead of 180 !!!
well i didnt need anything to do, i pressed and hold the up vol. and down volume and pressed the power key , it did a hardreset and my old ROM back to me , though i noticed strange thing !!!
after the hardreset back to my old ROM i checked the SD card & phone storage and i found that i have now total storage 328 instead of 180 !!!
but then i upgraded my ROM this time with legal one from HTC support site , and the total storage got back to 180 again !!!
anybody knows what happened here ?!
p.s thank u guys for the help

HD2 Wont boot, need help

Hi guys,
First of all, maybe this is a hardware problem, not sure, becouse I afraid that i got broken HD2. When it came, it was powerer ON, and everything was working, but when I turned it off so I can insert my SIM Card, it dont boot any more. All I get is white screen.
What I tried allready.
1. I installed MAGLDR first time with no problem.
2. I used USB Flasher option to flash ClockWorkMod 150MB file from here http://forum.xda-developers.com/showthread.php?t=898913
3. I downloaded this rom file http://forum.xda-developers.com/showthread.php?t=769026 to my sd card, and installed it from recovery. There was no problem so far, installation was ok, but when phone rebooted, i got message Nand kernel error...
4. Then I read that i need to do task 29 first, and start all over again. I used HD2toolkit for that, downloaded it from forum, and did task 29 no problem. But affter that, a cant install MAGLDR no more. A always get error 270 - image was corupted!!!
And thats it. Now I only have white screec.
Volume down + power works, so I can enter tri colour.
I have HSPL 2.08 on phone. I tryed to reinstall it, and it works (I get message on my pc that says succsess, but on phone there is no "we hacked it", so not sure if this do anything).
Radio is 2.15.50.14.
I read 7-8 hours yasterday here, and coudn't find nothing more than this things i already tried. I found something about SPLXPLOIT but cant make it work on windows 7 (not sure should I even do this).
Help wanted.
Thank you in advanced.

in tri-color screen do you see 'usb' at bottom? you should flash mgldr in tri-color screen.do you do so?

Yes, it is first serial, but when I conect it to PC it is USB.
On the phone progres bar go from 0 to 100% instant, and then phone restart, but I just got white screen. On pc i got message from hd2Toolkit error 270 - image is corrupted.
Thanks

As always, in these cases, I suggest you reinstall the stock firmware using the SD-card trick.
Yes, it'll reset your SPL and everything else, but if it boots, then it means everything is working fine (so it's not a hardware problem), and you can start "rebuilding" your Android OS.
Also, make sure to copy Android ROM ZIP files by mounting the SD card directly to your PC, rather than use the USB option, which is known to cause corruption at times.

Any link for this?
No sure what i have and what i havent tried.
Thanks.

can you try downloading and installing toolkit.maybe some parts of it are corrupted.

I just tried sd card update to default rom, but got this message in attachemnt.
Any ideas?

vlastem said:
I just tried sd card update to default rom, but got this message in attachemnt.
Any ideas?
Click to expand...
Click to collapse
dont choose 'update from sdcard'.but ad recovery-install zip from sd-choose zip from sd- then choose your rom.zip. and reboot

Not going to work becouse I canot install even MANGLDR any more.
When I tried to do that, I Get message in attachemnt.

vlastem said:
Not going to work becouse I canot install even MANGLDR any more.
When I tried to do that, I Get message in attachemnt.
Click to expand...
Click to collapse
can you try the attached mgldr. connect phone to pc,in tri-color screen see 'usb'. unrar the attached file.right click on Rom update utility .exe. run as administrator.

Did try this right now.
In first screen it says readme.txt is missing, but I can click next.
In next screen i got this massage
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
I run it as administrator. Widows 7 bussines, 32-bit

vlastem said:
Did try this right now.
In first screen it says readme.txt is missing, but I can click next.
In next screen i got this massage
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
I run it as administrator. Widows 7 bussines, 32-bit
Click to expand...
Click to collapse
sorry i was wrong.you must right click on rom update utility exe when you are in tri color screen (i havent done this for a long time)

is that radio supported by MAGLDR?
Try using the 2,08 radio and see if that helps

Thank you all for help.
I tried everything that I found here, but nothing helped.
I took it to service two days ago, we will see what they will say.
Will keep you informed.
Thx

Same problem...
What did you get from them??
Share the info, plz.
Thanks in advance.

Will upload microscope pictures tonight.
Bad stuff this is.
No hope for mine, hardware, pipple put glue on motherboard, it worket for some time, but no more.

Try reflash radio with task29)

vlastem said:
Will upload microscope pictures tonight.
Bad stuff this is.
No hope for mine, hardware, pipple put glue on motherboard, it worket for some time, but no more.
Click to expand...
Click to collapse
Hi, same problem here radio bricked i think, bootloader works fine but nothing more, nothing can eb flashed, every time error 270... İm reserching 2 days but nothing has changed...

[Q] Please help reviving HD2

My HD2 has no rom. Im able to access the bootloader, which says SPL-2.08.0000. I tried to install stock rom 2.10 and 3.14 from tmobile using 2gb MicroSD card, but phone gets stuck in the grayish screen saying "loading" or install in progress but actuall goes no where.
I can't do it via a USB connection because my computer keeps trying to install the device driver and it can't find it. So I think the MicroSD card is the only option buts its not working for me as I mentioned.
I'm new today to XDA, and dont know what other steps to take. Thanks in advance to all.
Update: At one point, it started the install and stopped with the message: Radio_v2 - RSA failed

The drivers you need fmto get the required HTC USB Synced connection in the bootloader is included in the Active Sync (for XP) and Windows Mobile Device Center (for Vista and Windows 7). Click on the guide linked in my sig as there is a link in the guide to the Microsoft site that has the both of them.
The radio fail message means it failed to install the radio version that is with the stock ROM so the install of the ROM was aborted. Maybe flashing via USB will work if not you may have a hardware issue.

I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do

sharnellbraden said:
I can't get my phone to load a rom either but I accidently tried to put a touch pro 2 rom on mines not paying attention so what I want to know is if their is a way to erase the memory for flashing I did a master reset with the phone off already anybody else ran into this problem if so do u know what I could do
Click to expand...
Click to collapse
The only thing I know of that you can do to "erase the memoy" as you said. is to one use MTTY or just a Task 29. Sorry I can not find the original tread on MTTY for HD2 but that one should still work for you. The best thing in my oppinion though is to just run a Task 29 as it is the easiest and does the same as the MTTY. plus jst so you know when you flash a stock ROM it runs a Task 28 (wich is pretty much the same thing, some do argue this fact though) before it flashes the ROM.
Go and check out recognized developer ksubedi's HD2 NAND Toolkit. It makes doing anything to the NAND ofthe HD2 very easy and simple, including Task 29.
Now the only concern I have is can you still get to the bootloader by powering on the HD2 while holding the volume down button down? Cause if not you you bricked the HD2 when you flashed the wrong ROM by accident. If you can you can still run th Task 29, oh and you have to have HSPL flashed to the HD2 to use the Task 29 also.

[Prob] No WP7 Rom is working properly (email-, browser-force close,installation fail)

Hi, xda-community
I have been using Android NAND for a long time and today I decided to change back to WP7 again. ( I got it fully working few months ago)
The Problem
WP7 boots normally. BUT
1. The browser doesn't work (Doesn't load websites though Internet is working) and after ~3 starts it won't start anymore (Softreset won't help.. It's dead)
2. Emails will be downloaded but when clicking the write new mail button or when trying to open a mail it will force close.
3. Apps from Marketplace will donwload but get stuck at installing screen.
These problems can't be ROM-dependent cause i tried 5 different roms and got the exact same error everytime.
I formatted my SD-Card. I have MAGLDR 1.13 and 2.15..... Radio.
And as mentioned above I got WP7 fully working on the same SD-Card some time ago.
During the flashing process there has never been any problem.
To all the more experienced users out there please help me !!!
Friendly, Consti

did you hard reset after WP7 installed?
and use this ROM
http://forum.xda-developers.com/showthread.php?t=1236027

Thx mate,
No actually I didn't hard reset yet! Excellent idea, I'll just try that and write back (and I'll try the ROM)
EDIT: None of the above worked. I got stuck at boot screen with XbMod Rom...
EDIT: YOUR BLOODY ROM IS WORKING!!!!
To Everybody with similiar problems: In MAGLDR go to "10 Services" and set "Use 24 Last NAND" or something.. then "Clear MSDR" or something ;D It worked for me now

Step by Step screen shoots

Hi All, i have a note 3 and its in repair now so i pull out my old HD2 but it have windows 6 and i want to change it to be android only no windows what so ever, i rememer long ago (once the android was out) there was a step by step screen shout to how to do that .... i tried the SD and it have problems thats why i want to install it on the core of the phone not through the SD so is there any guid that can help me do that as i cant find at tthe moment ...
thanks and really appreciate it

Brief Info
KiMoZ said:
Hi All, i have a note 3 and its in repair now so i pull out my old HD2 but it have windows 6 and i want to change it to be android only no windows what so ever, i rememer long ago (once the android was out) there was a step by step screen shout to how to do that .... i tried the SD and it have problems thats why i want to install it on the core of the phone not through the SD so is there any guid that can help me do that as i cant find at tthe moment ...
thanks and really appreciate it
Click to expand...
Click to collapse
My Friend ... Flash CLK 1.5 (THrough HSPL Power Off Now Hold The PowerOff+VOLDown Then Connect USB And Run The RUU) Then Go To CLK ( Power Off And Hold PowerOff + The Middle Button )Now Go To Recovery Then Copy Your ROM To SD Card And Go To Flash Zip File From SD Card And Then Flash The Android Rom And At Last Reboot The Phone Then The ROm Boots ... Done
With Best Wishes
Hitman1376​

hitman1376 said:
My Friend ... Flash CLK 1.5 (THrough HSPL Power Off Now Hold The PowerOff+VOLDown Then Connect USB And Run The RUU) Then Go To CLK ( Power Off And Hold PowerOff + The Middle Button )Now Go To Recovery Then Copy Your ROM To SD Card And Go To Flash Zip File From SD Card And Then Flash The Android Rom And At Last Reboot The Phone Then The ROm Boots ... Done
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
thank you very much ... it sounds easy but can u share with me the links of the files if there is no screenshots.. and will that remove the windows completley from my phone

KiMoZ said:
thank you very much ... it sounds easy but can u share with me the links of the files if there is no screenshots.. and will that remove the windows completley from my phone
Click to expand...
Click to collapse
Thats Easy You Can Use This ... Or This ( I'm Sure Your Not A Noob But Thats Onle The Title Of This Thread - Me Myself Recommend The 2nd One )
With Best Wishes
Hitman1376

hitman1376 said:
Thats Easy You Can Use This ... Or This ( I'm Sure Your Not A Noob But Thats Onle The Title Of This Thread - Me Myself Recommend The 2nd One )
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
thank you very much really appreciate it ill try this

Are you ok there? Maybe this will help:
One of the most important part, before do all you have to install first HSPL and after that a Radio, I think v2.12.50.02_2 it's good enough. Reboot your phone and keep pushing volume down, when you are in 4 colors (bootlader) use Task29 to format your device from PC, Connect HD2 to pc let windows install drivers, then execute task29, when you reach 99% keep pushing volume down to boot again in bootlader (4colors). After Task29 instal MAGLRD, when it is installed reboot your phone and when you see go, go, go appear keep pushing on/off botton to boot in MAGLRD, go to flashable mode and install Recovery CMW or 4EXT, whatever, before that open flash.cfg file with Note and set up the file like the developers asking on they roms threads, (Partition 200mb, Cache 2mb exc) when you installed recovery put the Rom zip file which you like to sd, format your sd from pc before do that, then boot in MAGLRD, when you are there boot in recovery and select flash from zip in installation, done, enjoy the Rom. After installation reboot your phone 3 times. Flash in this way how many time you like and if you have problems do not ask me.
I run Tytung ICS v3.0 (very stable and fully working) and I get with my 2300mha battery 5 days of normal use. Latest Roms I don't know if they will reach that.
I do not have screen shots because you don't need that, what I wrote it's 2 months of heavy search on how do that on XDA.
Hit 10 times thanks botton.