Related
I got this phone on Ebay because I am poor. It was a T Mobile unlocked that was changed to Android. I can't get rid of the old user name and don't have the password for the Android market account set up on this phone. I can't do a factory reset and I need help. I would prefer to put 7 on it but I would be happy putting 6.5 back. Android would do if I could reset the user account. I do hope someone can help me. I am not very technically gifted but I can follow easy instructions. Please help me.
Judy
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
oscar0324 said:
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
Click to expand...
Click to collapse
I think doing it with the SD card is only way to get back to 6.5.
You could always boot into the boot loader by holding the up volume and power key then flash a 6.5 Rom.
Sent from my HTC HD2 using XDA App
GaryOG said:
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Stormynights said:
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Click to expand...
Click to collapse
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
GaryOG said:
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
Click to expand...
Click to collapse
Thank you so much for the link.
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
[email protected] said:
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
When I take the battery out and then hold down the volume and press the power button I get that multi screen and I got to the USB then nothing else happens. What am I missing?
dazza9075 said:
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
Click to expand...
Click to collapse
WHY?
OMG I did it. I can't wait till my grand kids find out how cool I am now. Thank you to everyone that helped me.
Stormynights said:
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
Click to expand...
Click to collapse
I had a few attempts before I got it so try again.
It worked for me with a 16GB card.
Turn off your mobile.
Hold the Volume Down and End Call (power) buttons at the same time.
When "Searching" appears on the screen, release the Volume Down button.
This guide may help. But ignore the things about custom ROM’s and HSPL for now.
http://forum.xda-developers.com/showthread.php?t=681317
ok, there are two versions of the HD2, one with 512MB one with 1024MB, some t-mobile US phones (TMOUS) have 1024MB, if you ge the wrong ROM you could potentially bugger your device
for instance, flash a ROM with a unsupported radio on your device than game over....potentially
if you have a TMOUS 1024MB HD2
flash to .51 radio an its screwed
flash to .50 radio an its ok, except 2.05.50.x radio which will screw it
and stick to TMOUS ROMS as well
if you have the regular world wide version we can flash to what ever we like
its important to find out what someone is using before recomending them to flash any WM6.5 ROM because if by chance that ROM contains an incorrect radio version for that hardware then its game over.
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.
I was trying to install blackSTONEhengeHyPerSlim_4_1 on my blackstone. I installed olinex and after that stored the nbh and exe file on the sd card and then through task 29 flashed it. The rom got successfully installed but now the phone is stuck at the bootup. It says
Checking Radio...
Checking protocol..
Checking Rom..
But now won't get to the next screen.Because of this i can't get to active sync. Please help..Pleaaaasseee
Did u follow the instructions completely, cause it worked fine for me and others... Do you have radio 1.14 or above installed? Did u try to reflash?
ok, no need to worry. Boot into bootloader. What is your SPL?
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Did you try Vol UP + Vol Down + Power ?
Yes i did try that after my phone got screwed up with test29 method but it shows nothing at all after successfully installing rom..:-s
no need to worry
always read read read and must read before flashing. I think your phone is quite ok. You does task29 to it. what is task 29 means. it means task29 will clean our device completely only splash screen displyaed, phone always stucked on this screen. it is very normal, it means you completyely cleaned your device. now you are ready to flash your device. do the following procedure--
1. remove the battery and reinsert it.
2. now turn on the phone while pushing volume down key.
then bootloader (tricolor screen) mode will be displayed. many times it will not come into bootloader and device normally starts and stuck on splash screen. the reason is simple, you didnt press volume down key properly, it happend many times to me also.
Now remove battery cover, remove battery and reinsert it, dont cover the battery, now take slylus & press volume down strip with the stylus. ( volume up & down keys are installed in battery cover, so when you push volume down key in flap open condition, it should be done by stylus.)
ok
push volume down by stylus & hold it and start the device, it will come in tricolor screen means bootloader mode, on the bottom screen it will show serial.
Now conect the device to the pc & bottom line on the screen will become serial to USB.
Now perform task28= means flash normal rom, do not perform task 29 again.
task29 will take 1 minute to flash while normal RUU will take about 7-8 minute.
try it and give feedback/
kulwant said:
Yes i did follow the instructions. Now the phone won't bootup. I tried it with the volume down and power up method. Rom does get installed but then again it won't bootup..
Click to expand...
Click to collapse
Have you flashsed a differnet radio ?
What you did is just Task29 your phone. Task29 needs something to flash in order to do its thing. Usually we flash radios (good ones obviously) because they are smaller than full roms. If you flash a full rom with Flash29, it will get erased after completion.
What you need to do now (since your phone now has no ROM installed) is boot it while pressing volume down to get to the bootloader, plug via USB and flash a rom using a "non-task29" flasher, like the standard BlackStoneCustomRUU.exe file that comes with basically every rom.
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
kulwant said:
Hello thanks for replying my internet wasn't working but i did manage to boot my phone but now the touch stops working after. I know this as i press the volume button and the phone responds to that hence telling me it's not really freezed up. This is all what i did.
Stored .nbh file in the task 29 folder this is the rom version whose nbh file is used (RUU_Duttys_HD_V3.9__XT_Turbo_5.2.21051.1.6.4_1.59.709.0_Radio_52.62.25.34_1.14.25.24_)
After the flashing is done i reset the phone by taking out battery and starting it again in bootloader.
Now i flashed again with (blackSTONEhengeHyPerSlim_4_1)
After installing it completely the touch stops responding.
Kindly help me with what seems to be the problem. Thanks
Click to expand...
Click to collapse
Hi mate.
I did somthing for you....so i hope it will helps you.
1. download file from this link. http://hotfile.com/dl/115059516/5623431/Radio_1.13.xx(original_hd_nbh)__task29.rar.html and after unrar.
2. Make task 29 with this one. (Nothing change in that unrar folder)
3. After finished T29, take uot battery, put it back, put device to BootLoad. screen.
4. Connect with PC again and flash your desided ROM. (it means if you choice your rom, after unrar or unzip, Rom has own folder with that all files ...BLACIMG.nbh, BS_CustomRUU.exe, etc......
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
kulwant said:
thanks i'll just download and do it..Will definitely post in what happened...Thanks a tonne for the quick response..
Click to expand...
Click to collapse
...It's ok mate, like i wrote, i hohe, it 'll helps you.
let me know after....
Any new good looking rom you would suggest for me to try that would be bugfree ???
kulwant said:
Any new good looking rom you would suggest for me to try that would be bugfree ???
Click to expand...
Click to collapse
.... for beginning: T29 finished ok?
for your guestion: Hmmmm, for me...really good ROM is from Cloudyfa, but objectively, it's up to you, which one from this site you choice.
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
kulwant said:
The link you gave me says
This file is either removed due to copyright claim or is deleted by the uploader.
:-s
Click to expand...
Click to collapse
Yeas mate, i deleted it. I was thinking, that you download this file already and saved it to your PC.
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
kulwant said:
LoL it's all cool it takes a while i got 512kbps..I got the stock rom from xda page
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
This one's fine right
Click to expand...
Click to collapse
Yes that one is fine. Once T29 is complete take out battery and then re-insert it. Now put phone into bootloader (hold vol down and press power on while still holding vol down. BOOTLOADER IS A TRI-COLOUR SCREEN).
Now flash your rom
i also flashed blackstonhenge hyperslim 4.6 and now touchscreen stopped working....any solution...
Hello,
My htc hd2 won't start anymore.
When I press the on button it first goes to the Green HTC HD2 letter screen, then the NAND bootingscreen with this text:
aMAGLDR V1.11
by cotulla 2010
booting android from NAND
ANDROID LOAD at **********
From nand
blablabla
etc etc
LOAD DONE!
12345
GO GO GO
And at the end an Android logo with HTC HD2 underneath it.
and then it's starts all over again.
How can I fix this? or restore everything back to the basics of android?
I dont know anymore specs from the Nand build
only it has the CyanogenMod on it and it's Gingerbread.
Plz can anyone help me, I'm gonna fly tomorrow to the States for holydays so I very appreciate it if anyone can help me before I'm gone.
(I'm sorry for my bad english!)
Grtz Jordy
constantly rebooting a few seconds into the sequence is sometimes down to a bent battery pin. check them carefully. Failing that id suspect a fresh flash is in order.
I have a bent battery pin indeed. but i have it since the third day i bought this phone (1,5 years ago).
How do i make a fresh flash ? :$
Before fresh flash .. what has made your Android fall into a bootloop? have you flashed anything via cwm recently? that could be it.
nope did nothing. only thing i did was putting my sd card in my comp, and after that first some apps didn't work correctly, but that happens me all the time. so i reboot and so it all started ...
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Ok,
You didn't turn off your device, you removed the sd card immediately (or unmounted it from settings), right?
You have data2sd enabled on your build, or apps2sd?
Try to remove sd-card and then boot...
If above ddn't work, try to reflash your build through cwm (without wiping data, which will only restore your system to original state) ..
Report back ...
thefuzz03 said:
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Would you mind using the search tool and not hijacking other's threads?
here you go: http://forum.xda-developers.com/forumdisplay.php?f=735
Click to expand...
Click to collapse
@Marvlesz; yes i unmounted it from settings, and im using apps2sd
without sdcard he still wont start normally...
could you explain how i do the reflash?
with the volume button down and then start it up it also stays on the colored screen...
I'm sorry but I'm very newbie @ this stuff.
It depends on how you flashed this ROM in the beginning .. ( I assume you did it through cwm)
So get to the website of this rom and download it again (or pass if you have it on your pc)
bootup your phone while holing nothing but the power button, phone will remain on aMAGLDR and won't boot into Android.
Go to option 8. AD Recovery (using volume rockers) and press Green button (dial) ..
A black screen with orange text will appear, remove your sd and put it into your pc, copy your ROM's Zip file and return sd to phone.
Go to "install zip from sd" .. choose second option, and choose the rom.. then hit yes. After it's done, hit on reboot.
Report back ..
Hi. im sorry i didnt listened to you :O
I saw the menu and did the hard reset, everything is gone, but i dont mind, im glad he is working fine again
Thanks for your help!
lol, Im sorry to hear that you lost your information ... I recommend doing NANDROID backups from time to time (from orange menu) as well as apps backups with (titanuim backups) .. even if you messed up with the system files, you still can get it back ..
Anyway Im glad that you phone has come back to life..
Quick
Quick help
im having a problem with my HTC HD2
im having pretty much the same problem..everytime i try to turn it on it loads up all the way to the occupy together screen then it just starts back over again. so i left it on the charger and let it charge for a whole night and its still doing the same thing. i've tried to do a hard reset but my volume down button doesnt work =/ is there something i can download or is there an update that i need for it to work again?! SOMEONE HEEELP!
Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.
That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...
Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7
Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell
The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!
need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.
check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..
Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.
Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.