please delete or lock this thread. it doesnt make sense anymore.
alen1901 said:
hi, i need to ask you, does somebody knows, can i flash only a overclockable kernel on stock JPQ firmware? i like just the way my phone is, and need only kernel so i can put min frequency on 83mhz and max 1300mhz. is that possible? please answer. thank you.
Click to expand...
Click to collapse
Yes you can....try g3mod kernel or fugumod kernel ..root the phone first
Use set CPU to adjust the frequency range.
Sent from my GT-I5800 using XDA App
Thank you very much. Can you provide me only a kernel file, i can't figure which i must flash. O.O also, will this delete my phones data?
Sent from my GT-I5800 using XDA App
Related
HELLO,
I JUST DOWNLOAD THE ROM HONEY SENCE_THREE.
ITS PRETTY NICE BUT WHEN I SET IT WITH THE .APK SETCPU
IT DID NOT SHOW ANY MORE THAN 1.2 MHz.
IS THERE A .APK THAN I CAN USE IT TO GET MY PHONE WITH MORE LIKE 1.8MHz?
OR OTHER WAY..
chipis said:
HELLO,
I JUST DOWNLOAD THE ROM HONEY SENCE_THREE.
ITS PRETTY NICE BUT WHEN I SET IT WITH THE .APK SETCPU
IT DID NOT SHOW ANY MORE THAN 1.2 MHz.
IS THERE A .APK THAN I CAN USE IT TO GET MY PHONE WITH MORE LIKE 1.8MHz?
OR OTHER WAY..
Click to expand...
Click to collapse
You will need a different kernel use faux123 kernel and flash the .02 kernel first then the .7 kernel for overclocking
Edit make sure kernel is for sense rom
Sent from my HTC Panache using Tapatalk
WHERE IS THAT LOCATED? on section ?
cnote74 said:
You will need a different kernel use faux123 kernel and flash the .02 kernel first then the .7 kernel for overclocking
Sent from my HTC Panache using Tapatalk
Click to expand...
Click to collapse
chipis said:
WHERE IS THAT LOCATED? on section ?
Click to expand...
Click to collapse
Developer section
Sent from my HTC Panache using XDA Premium App
ok if get the the Zip. Called the Faux123-first-time-kernel2 thast going to work?
and then the HTC-GB-Kernel-0.0.7-CFS-LV ??
cnote74 said:
Developer section
Sent from my HTC Panache using XDA Premium App
Click to expand...
Click to collapse
I have chainfire 3d v 3.3 and when i install drivers and put my settings, games arent playing. Please if anybody know how much mhz we have on galaxy 3 i5800 tell me thanks for answer
Sent from my GT-I5800 using XDA App
ChrisTK said:
I have chainfire 3d v 3.3 and when i install drivers and put my settings, games arent playing. Please if anybody know how much mhz we have on galaxy 3 i5800 tell me thanks for answer
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Install chainfire 2.0
Ok i will try it thanks
Sent from my GT-I5800 using XDA App
I have install it but i cant open it and i cant see it in my programs.but it says that it is installed
Sent from my GT-I5800 using XDA App
ChrisTK said:
I have install it but i cant open it and i cant see it in my programs.but it says that it is installed
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
put the ak in the system/app and then reboot. it works with me
check your pm..
i have an overclock and it says that my cpu has 667 Mhz frequency, i tried to increase it but it is full.I did a cpu test with other program and it says that the total score of 3d,2d cpu frequency and others are 1153 so i am confused
ok it works thnx i find it!!!
now it appears in my files, i followed the instructions on how to use but now it dint work on games. I want to play asphalt 5 but i cant... i have to instaill the 2.8 v??? if yes pliz give me a link...and if anyone knows about cpu and mhz tell me please
ChrisTK said:
now it appears in my files, i followed the instructions on how to use but now it dint work on games. I want to play asphalt 5 but i cant... i have to instaill the 2.8 v??? if yes pliz give me a link...and if anyone knows about cpu and mhz tell me please
Click to expand...
Click to collapse
You need oc to at least 1000mhz, recommended 1300mhz or 1200mhz
Cheers
Sent from my i9003 powered by Cyanogenmod 7
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
chainfire isnt playing because i have indroid v 3 honeycomb remix?
ChrisTK said:
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
Click to expand...
Click to collapse
install g3mod 2.3 oc to overclock your phone
G3mod oc is program on kyrillos? And i want to change honeycomb and to install kyrillos rom, i will put the .tar and start flashing to odin or i have to replace froyo 2.2 first?
Sent from my GT-I5800 using XDA App
ChrisTK said:
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
Click to expand...
Click to collapse
Flash another kernel. Use Odin, flash as one package. You can use g3mod or fugumod etc. Any kernel that is oced. Only then can you overclock
Cheers
Sent from my i9003 powered by Cyanogenmod 7
ChrisTK said:
G3mod oc is program on kyrillos? And i want to change honeycomb and to install kyrillos rom, i will put the .tar and start flashing to odin or i have to replace froyo 2.2 first?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Okok. First, download both kyrillos parts of the rrom. Place them in the same folder, and extract part one. Part two will automatically be extracted with it. Then, open Odin, select ops file, choose tick one package and choose the kyrillos rom that had been extracted. Then flash. If the kernel provided does not support oc, then flash another kernel that supports oc. Flash the kernel thru one package. Use setcpu to configure the CPU speed. Kyrillos 10 is gingerbread, while 9.x is froyo. Your choice, but for gb, only the kernels provided in the cm7 thread can be used.
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Do you know Which is better kyrillos or indroid 4 rom?
Sent from my GT-I5800 using XDA App
indroid 6*
omg i have install kyrillos v 9.5 and g3mod v 2.23 and i overclocked my plone to 1200 mhz and chainfire 3d is still not working and now my plone crashes...
an older version of chainfire should work for you. V2.0 worked for me on my galaxy 3
Sent from my GT-I9003 using xda premium
I have tested all versions... And all arent working. So i installed kyorarom v 5.2 but now when i go to install chainfire3d it says that i havent any free space to my system
Sent from my GT-I5800 using XDA App
Orange Kernel
Looking for testers!
Begin of Orange Kernel
I thought lets try to make a kernel my own. After a few weeks of looking to the right stuff I finally got a builded kernel. Now I just need some testers!
That was the beginning of Orange kernel. The name "Orange" is from the country I live in (The Netherlands) our king's house last name is "Van Oranje nassau". So I thought lets name my kernel that way!
Features
Governors added: Pegasusq, zzmove,smartassv2
Not really much stuff. I know, but I am trying to learn!
Bugs
Please tell me!
Isn't booting right now!
Download
Please no mirroring!
Orange Kernel Beta 0.1
Thanks to
Cocafe - His github!
For future use!
How about adding Governors like OnDemand, Smartass, Powersave or Performance...?
Do focus on Speed, Performance and Battery
I will try this kernel tomorrow (if I get some free time)
Sent using XDA-Developers' App from my GT-i9070
Sami Kabir said:
How about adding Governors like OnDemand, Smartass, Powersave or Performance...?
Do focus on Speed, Performance and Battery
I will try this kernel tomorrow (if I get some free time)
Sent using XDA-Developers' App from my GT-i9070
Click to expand...
Click to collapse
OnDemand, Powersave and Performance are there by default.
P.S. I will try it tomorow too.
Have u tried it or don't u have this phone. Kernel doesn't boot. Stuck on first screen.
Sent from my GT-I9070 using xda app-developers app
Please, focus on TRIANGLE AWAY support.
Darkness and Hope said:
Please, focus on TRIANGLE AWAY support.
Click to expand...
Click to collapse
Envoyé depuis mon GT-I9070 avec Tapatalk
Darkness and Hope said:
Please, focus on TRIANGLE AWAY support.
Click to expand...
Click to collapse
NO.
As i see op is still new to kernel compiling. I WILL NOT SUGGEST you to do anything related to sbl mods.
So please don't try to get triangle away working. If it is added incorrectly, we will have mass bricks.
Good to see a new member here though! :cheers:
Sent from my GT-I9070 using xda premium
Nice to see another person having a go at developing for our device, will try over the weekend.
b3dna said:
Have u tried it or don't u have this phone. Kernel doesn't boot. Stuck on first screen.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I have the phone. Thanks for all the ideas! Now first gonna try to let the kernel booting!
Shaaan said:
NO.
As i see op is still new to kernel compiling. I WILL NOT SUGGEST you to do anything related to sbl mods.
So please don't try to get triangle away working. If it is added incorrectly, we will have mass bricks.
Good to see a new member here though! :cheers:
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
As result ; will it work or not ?
Thvmh said:
I have the phone. Thanks for all the ideas! Now first gonna try to let the kernel booting!
Click to expand...
Click to collapse
OK. I'll test it as soon as it will boot. I'm bit lazy to revive and flash again
Sent from my GT-I9070 using xda app-developers app
b3dna said:
OK. I'll test it as soon as it will boot. I'm bit lazy to revive and flash again
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Use this: Odin flashable Stock kernel. Its not increase binary counter.
Op : i told you in the pm that you will have to add the kernel prefversion. Instead just change the config to force load the modules.
If you are still confused, pm me again.!
Sent from my GT-I9070 using xda premium
Help coz i installed merruk before but it results into ext4 brick and after a day the galaxy y logo is not appearing tried to unbrick but cant and after a week i unbricked it using totoro pit file (used to repartitioning) and worked and after that i am planning to install it again but dont know how please give suggestions coz this is the best kernel for my phone thanks
Sent from my GT-S5360 using xda app-developers app
[email protected] said:
Help coz i installed merruk before but it results into ext4 brick and after a day the galaxy y logo is not appearing tried to unbrick but cant and after a week i unbricked it using totoro pit file (used to repartitioning) and worked and after that i am planning to install it again but dont know how please give suggestions coz this is the best kernel for my phone thanks
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
If your own custom rom then this will work...
i use stock roms
Sent from my GT-S5360 using xda app-developers app
then http://forum.xda-developers.com/showthread.php?t=1981672
or through odin..google it
Sent from my GT-S5360 using xda premium
[email protected] said:
Help coz i installed merruk before but it results into ext4 brick and after a day the galaxy y logo is not appearing tried to unbrick but cant and after a week i unbricked it using totoro pit file (used to repartitioning) and worked and after that i am planning to install it again but dont know how please give suggestions coz this is the best kernel for my phone thanks
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
not worth installing it, latest stock ROM is faster compared to it, also its not stable, overheats easly and you can get random FCs - reboots, i'd recommend using latest stock kernel.
your phone will generate more heat on 1.248 mhz, so you'll get low performance compared to stock 1.000 mhz CPUs and it will reduce your battery - CPU life.
If you still want init.d and other kind of stuff custom kernels has to offer, try hellfusion #50, its the fastest custom kernel in my opinion, though i didn't test any custom kernels in last 2 months
ottomanhero said:
not worth installing it, latest stock ROM is faster compared to it, also its not stable, overheats easly and you can get random FCs - reboots, i'd recommend using latest stock kernel.
your phone will generate more heat on 1.248 mhz, so you'll get low performance compared to stock 1.000 mhz CPUs and it will reduce your battery - CPU life.
If you still want init.d and other kind of stuff custom kernels has to offer, try hellfusion #50, its the fastest custom ROM in my opinion, though i didn't test any custom kernels in last 2 months
Click to expand...
Click to collapse
im trying to find a kernel that supports gaming performance
Sent from my GT-S5360 using xda app-developers app
[email protected] said:
im trying to find a kernel that supports gaming performance
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Go to this site from development section...
http://forum.xda-developers.com/showthread.php?t=1762692
I hope this help you...
Sent from my GT-S5360 using Tapatalk 2
rizxdr said:
Go to this site from development section...
http://forum.xda-developers.com/showthread.php?t=1762692
I hope this help you...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Hey man thanks for the advice but i already used this kernel and tryin to find gaming kernels other than merruk and whitexp thanks again
Sent from my GT-S5360 using xda app-developers app
[email protected] said:
Hey man thanks for the advice but i already used this kernel and tryin to find gaming kernels other than merruk and whitexp thanks again
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
our galaxy y aint made for gaming...
Ze3rL said:
our galaxy y aint made for gaming...
Click to expand...
Click to collapse
Yeah but because of the ideas of the developers there sgy is possible in gaming
Sent from my GT-S5360 using xda app-developers app
[email protected] said:
Yeah but because of the ideas of the developers there sgy is possible in gaming
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
u cn still play games like cut the rope and stuff..even angry birds lag
ottomanhero said:
not worth installing it, latest stock ROM is faster compared to it, also its not stable, overheats easly and you can get random FCs - reboots, i'd recommend using latest stock kernel.
your phone will generate more heat on 1.248 mhz, so you'll get low performance compared to stock 1.000 mhz CPUs and it will reduce your battery - CPU life.
If you still want init.d and other kind of stuff custom kernels has to offer, try hellfusion #50, its the fastest custom kernel in my opinion, though i didn't test any custom kernels in last 2 months
Click to expand...
Click to collapse
Read again, try hellfusion #50, I could play jetpack joyride without any lag, except when game switches between textures (thats kind of due to RAM bottleneck)
Hellfusion #50 Kernel http://forum.xda-developers.com/showthread.php?t=1891682&highlight=hellfusion
And also keep in mind no kernel is good without tweaks, I'd recommend fly on mod and v6 supercharger [do not use fly on mod ram manager while v6 supercharger ram fixes are active]
You should also try defferent governors and I/O schedulers, I used antutu benchmark to test results with different I/O - governor combinations.Some of the kernels give low performance on smartassv2, while others give the best performance the kernel could give, so you'd better try all of them.
Galaxy y has very low internal storage, so try to keep it clean (when theres 30 mb empty or so, my phone gets lag spikes while gaming)
The kernel I gave you above has ext4 support.So use repencis ext4 converter or any other converters that convert system, data and cache partitions to ext4, then REMOVE EXT 4 JOURNALISM (IT MADE MY PHONE A LOT FASTER)
Ext 4 journalism disabling script : http://forum.xda-developers.com/attachment.php?attachmentid=2009287&d=1370093464
Hi everyone..I have the nexus 7 about a month now and i decided to o/c a bit for the main cause is gaming and surfing the net.
I am very satisfied by the device so far.
I want to keep my stock rom and the only thing i need is to o/c the cpu and gpu in order to achieve better fps in certain games.
Is this possible? e.g the google's stock rom (4.2.2) and for example a kernel? (faux-trinity e.t.c.).
I understand i must root my device but i don't know if i can keep my stock rom and o/c at the same time.
Thank you in advance
Short answer: Yes.
Sent from my SPH-D710 using xda premium
Highly possible. Check out Franco.kernel and it's premium app on the playstore you'd essentially have full control over gpu/cpu anyone correct me if I'm wrong.
Sent from my SGH-T999 using Tapatalk 4 Beta
Correct. You can use ROM toolbox to OC. There are also many other apps.
Sent from my SPH-D710 using xda premium
Thanks all for your help. So i need to root it first and then flash a kernel?
The rom toolkit or any other app won't let me overclock with the stock kernel is that right?
I think the franco kernel won't allow overclocking correct me if i am wrong