Start Fresh, Help! - Nook Color Q&A, Help & Troubleshooting

I would like to clear everything in clockwork and start over, under advanced settings which sections do I format to do this? If anyone can list the exact steps to start clean it would be greatly appreciated!

/System, /Data, /Cache. BEWARE: Doing this will cause the Nook to boot to A N D R O I D _ if you dont flash anything after doing it.

refreblast said:
BEWARE: Doing this will cause the Nook to boot to A N D R O I D.
Click to expand...
Click to collapse
What do you mean by that?

votinh said:
What do you mean by that?
Click to expand...
Click to collapse
Good question! I'm guessing he means it will continuously boot into CWR, but I thought that was a given.....

I am a noob and I want to do the same thing that is restore the nook back to original, so I can start over. I have cleared the system and file, but not yet the cache. Do I have to have an SD card mounted to restore? If so, what files should be on the card (including zipped or unzipped)?
Background. I successfully rooted my nook color. But in trying to download a purchased app from B&N, they pushed an update to a higher version (I think I was using 1.0.1) which bricked the nook. I've been trying to restore ever since. As of now, when I boot, I can get to the ClockworkMod Recovery v3.0.0.5 and navigate through the menus, but when trying to reboot, I can only get to the main ClockworkMod Recovery menu. So far I have tried to reformat the SD card and redownload files to restart, but no luck so far.
Thanks for any help.

If I format those sections will the SD card be wiped? I want to download the latest version from rom manager and start fresh, so I'm wondering will I need to connect to a computer after wiping.
Sent from my NookColor using xda premium

meber said:
If I format those sections will the SD card be wiped? I want to download the latest version from rom manager and start fresh, so I'm wondering will I need to connect to a computer after wiping.
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
ROM Manager only works when CM7 is installed on the eMMC. If you are running CM7 off an SD card you cannot use it to update ROMS.

being a noob, I'm not sure of the proper etiquitte for the forum. I don't want to appear to hijack the thread. I do need help. What is the right way to request getting back to working?

Related

[Please Help] Looping boot screen

Hi all,
A few months ago I rooted my magic and intalled a hero theme one of the JAChero ones, i believe.
Anyway, while in the phone I selected 'Restore factory settings' from within the options menu. The phone reset and now when it boots it just loops the HERO start up screen over and over.
I have still have the update.zip file I used and all the Nandroid backup stuff - but I don't know what to do with them.
Can anyone help?
normally formatting your sd card back to fat/ext/ls is a quick fix for this issue
sondh said:
I have still have the update.zip file I used and all the Nandroid backup stuff - but I don't know what to do with them.
Click to expand...
Click to collapse
update.zip: is just for when you install the rom, once you installed it now it is stored on your device so you no longer need a copy of it on your sd card,
I would personially save that to your computer though incase something like this happens and you dont have a backup but want the same rom then you dont need to search for it, you can simply put it back on your card, wipe, install
nandroid: is the copy of your phone the last time you hit the "backup" button in your recovery screen, you want to leave that on the root of your sd card (where it is now) so that if your phone ever gets messed up you can boot into recovery and do a "restore" (this is why you should always and only do a backup of a rom that is working and that you are happy with )
Hi,
Okay, firstly i've formatted the SD card to FAT/EXT and it's still happening.
I haven't done this in a long time... If I want to restore the phone to the backup do I need to use ADB?
If I boot into recovery mode I get the following options:
reboot system
apply sdcard:update.zip
wipe data/factory reset
Then at the bottom it says E:Can't open /cache/recovery/command
Thanks in advance.
sondh said:
I've formatted the SD card to FAT/EXT and it's still happening.
Click to expand...
Click to collapse
your using a hero rom correct? so I'm hoping you just mistyped that because to start your sd card needs to be partitioned to [ FAT32 / EXT2 / Linux Swap ]
sondh said:
If I want to restore the phone to the backup do I need to use ADB?
Click to expand...
Click to collapse
No as long as you did a backup and still have the nandroid folder on the root of your sd card, you should be able too boot into recovery, then choose "Nandroid Restore" it should be right under "Nandroid Backup" the one you chose to make the backup in the first place
sondh said:
If I boot into recovery mode I get the following options:
reboot system
apply sdcard:update.zip
wipe data/factory reset
Click to expand...
Click to collapse
What recovery img are you using? their normally is a build number somewhere on there [ i.e. Build: RA-magic-v1.2.3H ]
also heres a link to amon's recovery, their s a screen shot at the bottom of the first post of what that recovery looks like and those are the options you should have
RA V1.2.3
Right, I'm going INSANE!
It is a 32A device, so does the card need to be partitioned? Is there a way to partition the card in that way? REMEMBERING i can't do it via an app on the phone as the bloody thing won't get past the Hero boot screen.
I don't have the option to do a 'Nandroid Restore' - I think i used a Daldroid recovery image.
When I plug in the phone via USB, windows recognises it as 'Android 1.0' and won't let me install any USB drivers!!
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
sondh said:
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
Click to expand...
Click to collapse
na you can ive had it happen to me a few times the first time re-formatting the partitions worked and second time it didnt so i just flashed again and it works fine...
if you like the rom your using you could try flash the same one maybe something messed up during the install or you could just flash a whole different one
either way the direction i would go would be
first: format the card to fat32/ext2/ls
second: do a wipe
third: flash
hope that works out for ya
sondh said:
does the card need to be partitioned?
Click to expand...
Click to collapse
you def do need to partition it for the hero rom or youll always get that loading screen that will drive you even more nuts then your going now lol
sondh said:
Is there a way to partition the card in that way? REMEMBERING i can't do it via an app on the phone as the bloody thing won't get past the Hero boot screen.
Click to expand...
Click to collapse
you wouldnt be able to use an app to partition anyway so that doesnt really make a difference but if your going to flash another hero i would use these directions to partition your card and also make sure your card is a class 6 (you can tell by the # inside the circle on the card (not the size i.e. 8gb but there will be a circle with a (2),(4),(6) like that))
sondh said:
I don't have the option to do a 'Nandroid Restore' - I think i used a Daldroid recovery image.
Click to expand...
Click to collapse
if you dont have those options i would throw a different recover amons ra is really nice option wise here it is
sondh said:
When I plug in the phone via USB, windows recognises it as 'Android 1.0' and won't let me install any USB drivers!!
Click to expand...
Click to collapse
you can get the drivers from the android sdk which is here
sondh said:
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
Click to expand...
Click to collapse
na you can ive had it happen to me a few times the first time re-formatting the partitions worked and second time it didnt so i just flashed again and it works fine...
if you like the rom your using you could try flash the same one maybe something messed up during the install or you could just flash a whole different one
either way the direction i would go would be
first: format the card to fat32/ext2/ls
second: do a wipe
third: flash
hope that works out for ya
FINALLY!
Did as you said.
I'm all up and running again!
Thank you so much!

Recover or reinstall rom from clockwork?

My phone wont boot, so can i install a rom from clockworkrecovery?
agy1995 said:
My phone wont boot, so can i install a rom from clockworkrecovery?
Click to expand...
Click to collapse
Won't boot in what way? Can you get into fastboot and/or recovery? Since you're asking about CWM, I'm assuming you can get into it.
If you did a Nandroid backup (the main point of CWM for me), you could try just restoring it. If you didn't, I'd try a wipe all settings and then reboot. You should be able to get back to a virgin state on the main OS that way.
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
???
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
agy1995 said:
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
Click to expand...
Click to collapse
agy1995 said:
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
Click to expand...
Click to collapse
I'm still confused what your problem is.
You say the phone won't boot, but then you talk about erased data.
What exactly did you do to the phone? What was the last few things you did before you "broke" it?
What happens when you try to boot the phone (ie., it's powered off and you press the power button)? How far in the boot process does it go?
If your problem is that the phone boots but all your data is gone, there's no way to get back unless it auto-syncs down from Google, or you used a backup program like Titanium, or you made a nandroid backup in CWM.
If you made a nandroid, you should just be able to boot into CWM, select backup and restore and then restore your backup.
This is what happened....
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
agy1995 said:
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
Click to expand...
Click to collapse
The Modaco rom(http://forum.xda-developers.com/showthread.php?t=883985) should work just fine. Put it on the USB storage then in Clockwork go to "Install from zip."
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
willyalmanzar said:
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
Click to expand...
Click to collapse
Known issue. There is a thread in the Development section(http://forum.xda-developers.com/showthread.php?t=884499). The OTA "broke root."
Ouch. Now I understand.
In the future, always make a nandroid backup before messing around with things, easiest way to recover.
I see you're looking for help in this thread. Maybe they can help you.
You could also try flashing Doc's or Paul's roms also in that section.
rom
I tried that custom rom... still didnt work. Im going to give it another shot!
agy1995 said:
I tried that custom rom... still didnt work. Im going to give it another shot!
Click to expand...
Click to collapse
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
unremarked said:
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
Click to expand...
Click to collapse
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
agy1995 said:
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
Click to expand...
Click to collapse
You've tried another NAND backup, besides the one that MD5 mismatched, yar? Be careful not to rename it, as that can cause the mismatch.
Nope
Nope i didnt try any...
Do i have to rename it to update.zip?
Do i have to rename it to update.zip?
agy1995 said:
Do i have to rename it to update.zip?
Click to expand...
Click to collapse
The custom rom? No, you just go into recovery, wipe/factory reset, install from SD card, then navigate to where you put the .zip on the SD card.
I see you did try the 2.3.1 NAND backup in the development section. Try downloading it again on your PC, unzip it, then place the new folder on the clockworkmod's backup folder on your SD card. Again, do not rename it.
Im trying it now.
Im trying it now.
agy1995 said:
Im trying it now.
Click to expand...
Click to collapse
Be warned that if you do get the NAND to restore, you may lose clockwork recovery. I know I did when I first tried to use it.
Don't panic though, because you can fastboot flash clockwork back on from the bootloader.
I am pushing the files....
I am pushing the files....

[Q] pleas help

i wanted to upgrade my wildfire with the latest CyanogenMod but i coudint then i went to restore my backup but nothing happend ether now i'm stuck in the htc start screen pleas help me.
Have you made a nanroid back up?
Make sure you unzip the rom from the right place on your SD card.also try and wipe the cache and reinstall the cm7 rom.
If that doesn't work! I can try and send you one of my old backed up roms.
Sent from my HTC Wildfire using XDA App
kingrps said:
Have you made a nanroid back up?
Make sure you unzip the rom from the right place on your SD card.also try and wipe the cache and reinstall the cm7 rom.
If that doesn't work! I can try and send you one of my old backed up roms.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
the main problem is how can i put files now via usb because i cant also i did unzip the file from the right place it isn't my first time
pleas help
some one pleas help me
Make sure you clear data and format the system partition before restoring the backup.
nhnt11 said:
Make sure you clear data and format the system partition before restoring the backup.
Click to expand...
Click to collapse
i did and nothing happen. is there a way i can get to my files via usb?
you won't be able to access files unless you select disc drive, and you can't do that. are you trying to install through hboot?
if you take the battery out of the phone and go to the bootloader screen and boot into the recovery screen and select the nandroid screen you will be able to mount the usb storage from there at least i can from my wildfire, hope this helps you
ephbee said:
you won't be able to access files unless you select disc drive, and you can't do that. are you trying to install through hboot?
Click to expand...
Click to collapse
if you go to the hboot screen and boot into recovery then select nandroid there will be an option to mount usb storage from there at least thats what i did when i had the same problem with cyanogen 7
Petem661 said:
if you go to the hboot screen and boot into recovery then select nandroid there will be an option to mount usb storage from there at least thats what i did when i had the same problem with cyanogen 7
Click to expand...
Click to collapse
thanks dude that help alot
zero688 said:
thanks dude that help alot
Click to expand...
Click to collapse
glad i could help

[Q] A2SD problems.

Here is a story about me and my phone:
I'm using this rom for about 2-3 months and it's great!! http://forum.xda-developers.com/showthread.php?t=1817793
But when I was updating some apps with the Play Store I got error 492.
Googled it and I found a thread on XDA and it said that I had to clear some caches.
So I did that and a Dalvik Cache wipe and I fixed permissions.
But it ended in an endless boot. So wiped everything and I did as an extra a Task 29. I flashed my rom installed INT2EXT+. The first boot after I flashed INT2EXT+ something weird happened: The WiFi just didn't turn on. I just turned it on but the slider bounced back after 5 seconds. Reflashed still that problem. So here comes the question how can I fix it?
Wi-Fi issues are sometimes connected to too small system partition. Perhaps caused by bad blocks. Make sure your system partition is bigger than needed. I usually add 10/15 mb above what the rom requires
samsamuel said:
Wi-Fi issues are sometimes connected to too small system partition. Perhaps caused by bad blocks. Make sure your system partition is bigger than needed. I usually add 10/15 mb above what the rom requires
Click to expand...
Click to collapse
Did what you said but when I let it start up I just see just a FC of Settings that's it. :crying::crying:
I rebooted it several times en every time it boots up I see ''Android is Upgrading''.
did you do a 'wipe data' because although the partitioning will clear out all teh nand, there may be stuff on the sd-ext/fat that are left over. a wipe data / factory reset clears those out too.
samsamuel said:
did you do a 'wipe data' because although the partitioning will clear out all teh nand, there may be stuff on the sd-ext/fat that are left over. a wipe data / factory reset clears those out too.
Click to expand...
Click to collapse
Did that still no progress..... :crying::crying::crying::crying:
Does anyone else have an idea?
sorry for using your thread for another Qstn.
is it possible to get an app that the files which will be downloaded from the store will donwload it directly to the sd card?
M3lloW1 said:
sorry for using your thread for another Qstn.
is it possible to get an app that the files which will be downloaded from the store will donwload it directly to the sd card?
Click to expand...
Click to collapse
Yes, it's called A2SD you will have to flash something trough CWM and partition sd card. http://forum.xda-developers.com/showthread.php?t=1716124
elias2204 said:
Yes, it's called A2SD you will have to flash something trough CWM and partition sd card. http://forum.xda-developers.com/showthread.php?t=1716124
Click to expand...
Click to collapse
But let's get on topic again what can I do to make A2SD work back again?
Please Please help me!!!! I'm turning pretty desparate by now!
just saying but:
Funnydwarf said:
That's because int2ex need its own script for wiping dalvik, using the one provided with CWM will cause bootloops: both of you can find the right one on the first post of croniccorey's thread. Just search for "Dalvik-Cache Wipe Tool" then make it run from install zip from sdcard entry.
Click to expand...
Click to collapse
If you have int2ex installed then download and run that zip because if you use normal CWM wipe-cache-dalvik, you'll get a bootloop. this may help you?
Sent from space..

Status 7 error on all ROM's and Kernels and CWM flashing

I had been running Wanam's ROM, and using Perseus kernel.
But now when I try to install another ROM, kernel or change the CWM zip I'm using it will always come back with a status 7 error. Flashing some ROM's just reboot, and go back into CWM.
I'm now stuck in CWM and can't boot up any ROM or can't restore a backup as its also saying status 7...
Have done a day of researching but any solution didnt work. Changing the updater-script to allow the i9500 didnt work as it already allowed any device to flash it.
Any ideas guys?
cheers.
hamdogg said:
I had been running Wanam's ROM, and using Perseus kernel.
But now when I try to install another ROM, kernel or change the CWM zip I'm using it will always come back with a status 7 error. Flashing some ROM's just reboot, and go back into CWM.
I'm now stuck in CWM and can't boot up any ROM or can't restore a backup as its also saying status 7...
Have done a day of researching but any solution didnt work. Changing the updater-script to allow the i9500 didnt work as it already allowed any device to flash it.
Any ideas guys?
cheers.
Click to expand...
Click to collapse
Hi,
Would THIS help?
If you returned everything to stock,you may be able to start again.
malybru said:
Hi,
Would THIS help?
If you returned everything to stock,you may be able to start again.
Click to expand...
Click to collapse
So just use ODIN and go back to stock, then re-root and try again from stock...
Thanks, I didn't even think of starting again from scratch...
malybru said:
Hi,
Would THIS help?
If you returned everything to stock,you may be able to start again.
Click to expand...
Click to collapse
Is there anyway to move folder from external SD card to internal SD card within CWM?
It seems to be a problem with my external SD card.
"error mounting external SD card"
I'm assuming that this is a exFAT problem as prior to this issue i was FAT32
hamdogg said:
Is there anyway to move folder from external SD card to internal SD card within CWM?
It seems to be a problem with my external SD card.
Click to expand...
Click to collapse
Hi,
That would need some kind of file explorer.
I do not know if there is such a thing in CWM.
malybru said:
Hi,
That would need some kind of file explorer.
I do not know if there is such a thing in CWM.
Click to expand...
Click to collapse
Yeah didn't think so.
I'll download a stock PDA and flash that... thanks again.

Resources