Hi all,
A few months ago I rooted my magic and intalled a hero theme one of the JAChero ones, i believe.
Anyway, while in the phone I selected 'Restore factory settings' from within the options menu. The phone reset and now when it boots it just loops the HERO start up screen over and over.
I have still have the update.zip file I used and all the Nandroid backup stuff - but I don't know what to do with them.
Can anyone help?
normally formatting your sd card back to fat/ext/ls is a quick fix for this issue
sondh said:
I have still have the update.zip file I used and all the Nandroid backup stuff - but I don't know what to do with them.
Click to expand...
Click to collapse
update.zip: is just for when you install the rom, once you installed it now it is stored on your device so you no longer need a copy of it on your sd card,
I would personially save that to your computer though incase something like this happens and you dont have a backup but want the same rom then you dont need to search for it, you can simply put it back on your card, wipe, install
nandroid: is the copy of your phone the last time you hit the "backup" button in your recovery screen, you want to leave that on the root of your sd card (where it is now) so that if your phone ever gets messed up you can boot into recovery and do a "restore" (this is why you should always and only do a backup of a rom that is working and that you are happy with )
Hi,
Okay, firstly i've formatted the SD card to FAT/EXT and it's still happening.
I haven't done this in a long time... If I want to restore the phone to the backup do I need to use ADB?
If I boot into recovery mode I get the following options:
reboot system
apply sdcard:update.zip
wipe data/factory reset
Then at the bottom it says E:Can't open /cache/recovery/command
Thanks in advance.
sondh said:
I've formatted the SD card to FAT/EXT and it's still happening.
Click to expand...
Click to collapse
your using a hero rom correct? so I'm hoping you just mistyped that because to start your sd card needs to be partitioned to [ FAT32 / EXT2 / Linux Swap ]
sondh said:
If I want to restore the phone to the backup do I need to use ADB?
Click to expand...
Click to collapse
No as long as you did a backup and still have the nandroid folder on the root of your sd card, you should be able too boot into recovery, then choose "Nandroid Restore" it should be right under "Nandroid Backup" the one you chose to make the backup in the first place
sondh said:
If I boot into recovery mode I get the following options:
reboot system
apply sdcard:update.zip
wipe data/factory reset
Click to expand...
Click to collapse
What recovery img are you using? their normally is a build number somewhere on there [ i.e. Build: RA-magic-v1.2.3H ]
also heres a link to amon's recovery, their s a screen shot at the bottom of the first post of what that recovery looks like and those are the options you should have
RA V1.2.3
Right, I'm going INSANE!
It is a 32A device, so does the card need to be partitioned? Is there a way to partition the card in that way? REMEMBERING i can't do it via an app on the phone as the bloody thing won't get past the Hero boot screen.
I don't have the option to do a 'Nandroid Restore' - I think i used a Daldroid recovery image.
When I plug in the phone via USB, windows recognises it as 'Android 1.0' and won't let me install any USB drivers!!
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
sondh said:
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
Click to expand...
Click to collapse
na you can ive had it happen to me a few times the first time re-formatting the partitions worked and second time it didnt so i just flashed again and it works fine...
if you like the rom your using you could try flash the same one maybe something messed up during the install or you could just flash a whole different one
either way the direction i would go would be
first: format the card to fat32/ext2/ls
second: do a wipe
third: flash
hope that works out for ya
sondh said:
does the card need to be partitioned?
Click to expand...
Click to collapse
you def do need to partition it for the hero rom or youll always get that loading screen that will drive you even more nuts then your going now lol
sondh said:
Is there a way to partition the card in that way? REMEMBERING i can't do it via an app on the phone as the bloody thing won't get past the Hero boot screen.
Click to expand...
Click to collapse
you wouldnt be able to use an app to partition anyway so that doesnt really make a difference but if your going to flash another hero i would use these directions to partition your card and also make sure your card is a class 6 (you can tell by the # inside the circle on the card (not the size i.e. 8gb but there will be a circle with a (2),(4),(6) like that))
sondh said:
I don't have the option to do a 'Nandroid Restore' - I think i used a Daldroid recovery image.
Click to expand...
Click to collapse
if you dont have those options i would throw a different recover amons ra is really nice option wise here it is
sondh said:
When I plug in the phone via USB, windows recognises it as 'Android 1.0' and won't let me install any USB drivers!!
Click to expand...
Click to collapse
you can get the drivers from the android sdk which is here
sondh said:
Right, I can boot the Amon RA recovery image from fastboot.
I've tried fixing the partition of the SD card, but it's still looping.
Can I just flash another ROM now, or would that mess things up?
Click to expand...
Click to collapse
na you can ive had it happen to me a few times the first time re-formatting the partitions worked and second time it didnt so i just flashed again and it works fine...
if you like the rom your using you could try flash the same one maybe something messed up during the install or you could just flash a whole different one
either way the direction i would go would be
first: format the card to fat32/ext2/ls
second: do a wipe
third: flash
hope that works out for ya
FINALLY!
Did as you said.
I'm all up and running again!
Thank you so much!
Related
Hi all.
Followed the guide on here:
http://androidandme.com/2010/01/hacks/video-how-to-unlock-and-root-a-nexus-one/
Rooting wasnt a problem, installing the RA wasnt a problem.
It took awhile to get the phone detected in windows through the USB Debugging mode.
Flashed it using the update-cm-5.0-N1-beta3-signed update.
Now its stuck on the screen thats flash ....
Just keeps doing it over and over. WTF is happening?
Any ideas please.
Thanks
nyzrox said:
Hi all.
Followed the guide on here:
http://androidandme.com/2010/01/hacks/video-how-to-unlock-and-root-a-nexus-one/
Rooting wasnt a problem, installing the RA wasnt a problem.
It took awhile to get the phone detected in windows through the USB Debugging mode.
Flashed it using the update-cm-5.0-N1-beta3-signed update.
Now its stuck on the screen thats flash ....
Just keeps doing it over and over. WTF is happening?
Any ideas please.
Thanks
Click to expand...
Click to collapse
Did you wipe?
pjcforpres said:
Did you wipe?
Click to expand...
Click to collapse
Dont know how to.
Ok detailed instructions.
You rooted and loaded Amon's recovery.(clearly being you flashed beta 3).
Did you Nandroid back up before you flashed as the directions said?
If so, you can simply restore that. and Phoen should be good.
If not,
boot back into Amon's recovery. Hold down volume thing as you click power, to get bootload, then scroll to recovery..
In Amon's recovery, you need to Wipe, Then flash Cyan's beta 3 which should be located on the top level of you SD card.
IN future. ALWAYS do Nandroid backup. I'm new, but when i screwed up i could just restore really easily. Avoided alot of pain/stress that way.
If you still end up having trouble, we can chat via some instant messenger or something.
seanowns said:
If you still end up having trouble, we can chat via some instant messenger or something.
Click to expand...
Click to collapse
PM Me your msn or AIM please.
nyzrox said:
Dont know how to.
Click to expand...
Click to collapse
Using Amon's RA, there are a list of options, one of them is "wip", open that up and it will give you a list of things to wipe. You will want to "wipe data", "wipe dalvik-cache" and "wipe ext"... then, go to SD card and repair your ext.
Now would be a good time to add in an ext file to your SD card if you want to use apps to SD card... you cand do that in Amon's recovery as well under the SD option, just select "partition SD card FAT32, ext2" and follow the insturctions... then I would recommend selecting the "upgrade ext2 to ext3" option afterwards.
Once you have done all the wiping, partitioned your SD card, do 1 more "wipe data" for good measure, then flash CM's 5.0 beta, then flash the google apps pack, then reboot and you should be good to go.
pjcforpres said:
Did you wipe?
Click to expand...
Click to collapse
nyzrox said:
Dont know how to.
Click to expand...
Click to collapse
I just lol'd.
I didnt see the Wipe option under flash from SD thats all
if you dont wipe first before installing new rom then this will happen to you.
i had the same problem and i wiped it and re-installed and it worked perfectly
theres a "wipe" option when you in the recovery boot image
Its all ok now. I got worried and flashed standard rom back using 'fastboot flash system system.something'
Then it booted fine, so turned off. Went into the bootloader, then down to recovery and saw 'Wipe'
Haha
haha, i am curious to know if anyone has managed to brick their N1 yet?
My phone wont boot, so can i install a rom from clockworkrecovery?
agy1995 said:
My phone wont boot, so can i install a rom from clockworkrecovery?
Click to expand...
Click to collapse
Won't boot in what way? Can you get into fastboot and/or recovery? Since you're asking about CWM, I'm assuming you can get into it.
If you did a Nandroid backup (the main point of CWM for me), you could try just restoring it. If you didn't, I'd try a wipe all settings and then reboot. You should be able to get back to a virgin state on the main OS that way.
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
???
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
agy1995 said:
I can get into it, the problem is i erase all data on my phone. Thanks in advance!
Click to expand...
Click to collapse
agy1995 said:
Is there any way i can get my phone back up and running restoring everything from clockworkmod?
Click to expand...
Click to collapse
I'm still confused what your problem is.
You say the phone won't boot, but then you talk about erased data.
What exactly did you do to the phone? What was the last few things you did before you "broke" it?
What happens when you try to boot the phone (ie., it's powered off and you press the power button)? How far in the boot process does it go?
If your problem is that the phone boots but all your data is gone, there's no way to get back unless it auto-syncs down from Google, or you used a backup program like Titanium, or you made a nandroid backup in CWM.
If you made a nandroid, you should just be able to boot into CWM, select backup and restore and then restore your backup.
This is what happened....
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
agy1995 said:
I tried to replace my fonts in system that are supposed to work on a different phone. Then when i tried to boot up the phone was stuck on the silver google logo. Now, after that i went into clock work recovery and formated everything in the mounts and storage menu. After reinstalling the phones boot img, my phone freezes at the google logo. I can still get into the clockworkmod recovery. I never backed it up, but tried to use a nandroid someone posted online but i get a md5 mismatch.
Again, thank you for all your help!
Click to expand...
Click to collapse
The Modaco rom(http://forum.xda-developers.com/showthread.php?t=883985) should work just fine. Put it on the USB storage then in Clockwork go to "Install from zip."
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
willyalmanzar said:
i have a problem almost like that but my rom manager open but wont even backup current rom or anything, my titanium back doesn't backup either. it said i could not acquire root privileges, this app will not work, please vertify that you rom is rooted and includes busybox, i have busybox and it's rooted. i guess this happen when i update the google update last night from rom manager. what should i do
Click to expand...
Click to collapse
Known issue. There is a thread in the Development section(http://forum.xda-developers.com/showthread.php?t=884499). The OTA "broke root."
Ouch. Now I understand.
In the future, always make a nandroid backup before messing around with things, easiest way to recover.
I see you're looking for help in this thread. Maybe they can help you.
You could also try flashing Doc's or Paul's roms also in that section.
rom
I tried that custom rom... still didnt work. Im going to give it another shot!
agy1995 said:
I tried that custom rom... still didnt work. Im going to give it another shot!
Click to expand...
Click to collapse
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
unremarked said:
Did you wipe/factory reset before attempting to install? I realize that you're pretty much wiped at the moment, but always best to start with that.
Click to expand...
Click to collapse
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
agy1995 said:
I did that + i am using version 3.0 clockwork. Still frozen on the google screen.
Click to expand...
Click to collapse
You've tried another NAND backup, besides the one that MD5 mismatched, yar? Be careful not to rename it, as that can cause the mismatch.
Nope
Nope i didnt try any...
Do i have to rename it to update.zip?
Do i have to rename it to update.zip?
agy1995 said:
Do i have to rename it to update.zip?
Click to expand...
Click to collapse
The custom rom? No, you just go into recovery, wipe/factory reset, install from SD card, then navigate to where you put the .zip on the SD card.
I see you did try the 2.3.1 NAND backup in the development section. Try downloading it again on your PC, unzip it, then place the new folder on the clockworkmod's backup folder on your SD card. Again, do not rename it.
Im trying it now.
Im trying it now.
agy1995 said:
Im trying it now.
Click to expand...
Click to collapse
Be warned that if you do get the NAND to restore, you may lose clockwork recovery. I know I did when I first tried to use it.
Don't panic though, because you can fastboot flash clockwork back on from the bootloader.
I am pushing the files....
I am pushing the files....
i wanted to upgrade my wildfire with the latest CyanogenMod but i coudint then i went to restore my backup but nothing happend ether now i'm stuck in the htc start screen pleas help me.
Have you made a nanroid back up?
Make sure you unzip the rom from the right place on your SD card.also try and wipe the cache and reinstall the cm7 rom.
If that doesn't work! I can try and send you one of my old backed up roms.
Sent from my HTC Wildfire using XDA App
kingrps said:
Have you made a nanroid back up?
Make sure you unzip the rom from the right place on your SD card.also try and wipe the cache and reinstall the cm7 rom.
If that doesn't work! I can try and send you one of my old backed up roms.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
the main problem is how can i put files now via usb because i cant also i did unzip the file from the right place it isn't my first time
pleas help
some one pleas help me
Make sure you clear data and format the system partition before restoring the backup.
nhnt11 said:
Make sure you clear data and format the system partition before restoring the backup.
Click to expand...
Click to collapse
i did and nothing happen. is there a way i can get to my files via usb?
you won't be able to access files unless you select disc drive, and you can't do that. are you trying to install through hboot?
if you take the battery out of the phone and go to the bootloader screen and boot into the recovery screen and select the nandroid screen you will be able to mount the usb storage from there at least i can from my wildfire, hope this helps you
ephbee said:
you won't be able to access files unless you select disc drive, and you can't do that. are you trying to install through hboot?
Click to expand...
Click to collapse
if you go to the hboot screen and boot into recovery then select nandroid there will be an option to mount usb storage from there at least thats what i did when i had the same problem with cyanogen 7
Petem661 said:
if you go to the hboot screen and boot into recovery then select nandroid there will be an option to mount usb storage from there at least thats what i did when i had the same problem with cyanogen 7
Click to expand...
Click to collapse
thanks dude that help alot
zero688 said:
thanks dude that help alot
Click to expand...
Click to collapse
glad i could help
I would like to clear everything in clockwork and start over, under advanced settings which sections do I format to do this? If anyone can list the exact steps to start clean it would be greatly appreciated!
/System, /Data, /Cache. BEWARE: Doing this will cause the Nook to boot to A N D R O I D _ if you dont flash anything after doing it.
refreblast said:
BEWARE: Doing this will cause the Nook to boot to A N D R O I D.
Click to expand...
Click to collapse
What do you mean by that?
votinh said:
What do you mean by that?
Click to expand...
Click to collapse
Good question! I'm guessing he means it will continuously boot into CWR, but I thought that was a given.....
I am a noob and I want to do the same thing that is restore the nook back to original, so I can start over. I have cleared the system and file, but not yet the cache. Do I have to have an SD card mounted to restore? If so, what files should be on the card (including zipped or unzipped)?
Background. I successfully rooted my nook color. But in trying to download a purchased app from B&N, they pushed an update to a higher version (I think I was using 1.0.1) which bricked the nook. I've been trying to restore ever since. As of now, when I boot, I can get to the ClockworkMod Recovery v3.0.0.5 and navigate through the menus, but when trying to reboot, I can only get to the main ClockworkMod Recovery menu. So far I have tried to reformat the SD card and redownload files to restart, but no luck so far.
Thanks for any help.
If I format those sections will the SD card be wiped? I want to download the latest version from rom manager and start fresh, so I'm wondering will I need to connect to a computer after wiping.
Sent from my NookColor using xda premium
meber said:
If I format those sections will the SD card be wiped? I want to download the latest version from rom manager and start fresh, so I'm wondering will I need to connect to a computer after wiping.
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
ROM Manager only works when CM7 is installed on the eMMC. If you are running CM7 off an SD card you cannot use it to update ROMS.
being a noob, I'm not sure of the proper etiquitte for the forum. I don't want to appear to hijack the thread. I do need help. What is the right way to request getting back to working?
Hi all
I have a Wildfire that had Cm7, was rooted and s-offed. As Im selling the phone i thought it would be a good idea if I reset to factory, ready to be sold. However it has now given me a problem.
I reset to factory by clearing the storage on the hboot screen, and now when i turn on the phone it stays on the boot animation. I can get top the hboot menu, but im now stuck.
Any ideas?
Cheers
Have you tried reinstalling CM7/Sense ROM?
No,
Are the steps the same as a normal install?
Yes.
Sent from my Ainol Novo7 Elf using xda premium
Did you factory reset to remove your personal data or to try get back to sense? You should always factory reset in recovery to avoid these problems. Also it wont return sense, need a stock rom or a ruu for that
sent from my android powered beast!
heavy_metal_man said:
Did you factory reset to remove your personal data or to try get back to sense? You should always factory reset in recovery to avoid these problems. Also it wont return sense, need a stock rom or a ruu for that
sent from my android powered beast!
Click to expand...
Click to collapse
I thought when i was doing it, it would just delete all the apps and stuff, so it would be a brand new phone but with cm7 installed.
Ill try and reinstall cm7 and see what happens..........
Right, update
I've followed this http://wiki.cyanogenmod.com/index.php?title=HTC_Wildfire:_Full_Update_Guide#Method_via_Recovery and on step 5, i've selected - Select the option to Wipe data/factory reset.
and now teh screen hasnt moved for about 10 minutes, its on the screen where there is a top hat and yellow arrow...........
help.....
press the power button again then use the trackball. to select everything in cwm.
Also I'm not 100% as I've never cleared storage from hboot but doesn't that wipe your SD card?
if so you may have wiped some files needed by the phone so you may need to reinstall Cm7 or whichever rom, not just factory reset.
Sent from my HTC Wildfire using xda premium
Scratch0805 said:
press the power button again then use the trackball. to select everything in cwm.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
lol yep just realised that
euqiddis said:
lol yep just realised that
Click to expand...
Click to collapse
don't worry you're not the first!! it had me for a few minutes too......
Sent from my HTC Wildfire using xda premium
Right, next problem....
Teh bootloop doesnt occur anymore, but I get a force close on the setup wizard., and all i get is a black screen, i can pull down the notification bar, and i can tap teh buttons and they vibrate, but everything else is black......
any ideas?
ok did you install gapps as well? go back to recovery and factory reset, wipe cache, dalvik cache. then reboot and try again.
No, didn't include gapps, i'll do that and see what happens when I get home
Sent from my HTC Sensation Z710e using XDA
pretty sure you need gapps for setup to work
Recommended Solution (by me):
(suppose u want "clear setup" of CM7 stable)
Prepare your SD
Wipe off everything
Copy setup files
download.cyanogenmod.com/get/stable/gingerbread/update-cm-7.1.0.1-buzz-signed.zip
download.clockworkmod.com/gapps/gapps-gb-20110828-signed.zip
downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Get out the SIM card
Boot to recovery
Wipe phone storage
In recovery go to mounts and storage
Unmount /cache
Format /cache, /data, /system
Go back, then to the advanced and Reboot Recovery
"Install" OS
Back in recovery go to install zip from sdcard/choose zip from sdcard
First install update-cm-7.1.0.1-buzz-signed.zip
Then gapps-gb-20110828-signed.zip
And finally Superuser-3.0.7-efghi-signed.zip
Go back, and power off
Now u re in state "like from the store", that mean that OS is not really installed, there re just files copied and real installation will run on frist boot
Unfortunately, theres a catch
Theres problem with CM7 installation and it can face the problem with GPS
First boot will pop-up "market like" window with all Google apps, my recommendation is to wait, dont install anyting, dont click on anything, just wait, it will disapear... u can safely install them later from the market..
You don't really need the su.zip, since CM7 comes pre-rooted.
user37x said:
Recommended Solution (by me):
(suppose u want "clear setup" of CM7 stable)
Prepare your SD
Wipe off everything
Copy setup files
download.cyanogenmod.com/get/stable/gingerbread/update-cm-7.1.0.1-buzz-signed.zip
download.clockworkmod.com/gapps/gapps-gb-20110828-signed.zip
downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Get out the SIM card
Boot to recovery
Wipe phone storage
In recovery go to mounts and storage
Unmount /cache
Format /cache, /data, /system
Go back, then to the advanced and Reboot Recovery
"Install" OS
Back in recovery go to install zip from sdcard/choose zip from sdcard
First install update-cm-7.1.0.1-buzz-signed.zip
Then gapps-gb-20110828-signed.zip
And finally Superuser-3.0.7-efghi-signed.zip
Go back, and power off
Now u re in state "like from the store", that mean that OS is not really installed, there re just files copied and real installation will run on frist boot
Unfortunately, theres a catch
Theres problem with CM7 installation and it can face the problem with GPS
First boot will pop-up "market like" window with all Google apps, my recommendation is to wait, dont install anyting, dont click on anything, just wait, it will disapear... u can safely install them later from the market..
Click to expand...
Click to collapse
That's a good plan, but with 2 drawbacks ... 1 you don't need to flash su. Might break stuff since cm7 is pre rooted. 2 what if something else went wrong and he hasn't booted the phone to check? Then sells, unaware of it being damaged. Buyer comes back angry, ect ect aside from that good tut
sent from my android powered beast!
heavy_metal_man said:
you don't need to flash su. Might break stuff since cm7 is pre rooted.
Click to expand...
Click to collapse
sorry but u re wrong.. it cant break anything.. its just update.. in CM7.1.0.1 is SU 3.0.6 u can safely update it to 3.0.7 (i do it every time like that..)
Edit: sure guys... u dont have to do that... u can do it later from market... u will be prompt to do that... lol ....its defenetly better way install app like that from market rather than from recovery...
(both ways works in this case, anyway my logic says me that is better install crucial apps like that from recovery..)
heavy_metal_man said:
what if something else went wrong and he hasn't booted the phone to check? Then sells, unaware of it being damaged. Buyer comes back angry, ect ect
Click to expand...
Click to collapse
..thats exactly why i mentioned point 7.
he have to decide what will be his next step..
if he decide to boot and try it out he will have to login to wifi, login to google account (to download Maps or GPS status) etc.. etc.. it will NOT be clear any more..
...it really depends on who is the buyer... does he know him ? can they do that together wiht buyers account, etc..
...because i dont know this dependencies i leave it open.......
user37x said:
Recommended Solution (by me):
(suppose u want "clear setup" of CM7 stable)
Prepare your SD
Wipe off everything
Copy setup files
download.cyanogenmod.com/get/stable/gingerbread/update-cm-7.1.0.1-buzz-signed.zip
download.clockworkmod.com/gapps/gapps-gb-20110828-signed.zip
downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Get out the SIM card
Boot to recovery
Wipe phone storage
In recovery go to mounts and storage
Unmount /cache
Format /cache, /data, /system
Go back, then to the advanced and Reboot Recovery
"Install" OS
Back in recovery go to install zip from sdcard/choose zip from sdcard
First install update-cm-7.1.0.1-buzz-signed.zip
Then gapps-gb-20110828-signed.zip
And finally Superuser-3.0.7-efghi-signed.zip
Go back, and power off
Now u re in state "like from the store", that mean that OS is not really installed, there re just files copied and real installation will run on frist boot
Unfortunately, theres a catch
Theres problem with CM7 installation and it can face the problem with GPS
First boot will pop-up "market like" window with all Google apps, my recommendation is to wait, dont install anyting, dont click on anything, just wait, it will disapear... u can safely install them later from the market..
Click to expand...
Click to collapse
Thanks alot, followed it and all is working including GPS
euqiddis said:
Thanks alot, followed it and all is working including GPS
Click to expand...
Click to collapse
glad to hear that..