HyperDroid-CM7-v3.0.0[apps2sd][CyanogenMod7 LEO 2.3.5]
i have installed this rom twice doing a clean wipe and following all the steps shown one by one by one. problem is the rom has installed but it wont run like it goes to home page but i have 100 errors from android and the rom doesnt function cause all the errors come up asking "wait" or "force close"
i am trying out new roms but this rom just wont run at all any help would be appreciated thanks alot
do you have sd-ext partition and have you formatted it using ad recovery-mounts and storage-format sd-ext.
mutil said:
do you have sd-ext partition and have you formatted it using ad recovery-mounts and storage-format sd-ext.
Click to expand...
Click to collapse
wait what is all this that you just told me hmmmmm im lost im using hd2 toolkit does it have that function i partioned the 150 mb required from the rom through the toolkit what else is there to partition ? im lost
First of all there are two versions. clk magldr. Make sure you're using the right one. Also make sure you have a recovery of at least 150 you can make bigger but not to exceed 200 I think. also do a factory reset, wipe cache and dalvik cache and them install rom. its not mandatory to have an external partition for this rom to work. You can also go to post #2 of the thread for more exact details
Sent from my HTC HD2 using xda premium
mexicandroid said:
First of all there are two versions. clk magldr. Make sure you're using the right one. Also make sure you have a recovery of at least 150 you can make bigger but not to exceed 200 I think. also do a factory reset, wipe cache and dalvik cache and them install rom. its not mandatory to have an external partition for this rom to work. You can also go to post #2 of the thread for more exact details
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
already tried doing all that step by step just how they asked me to install it but it installed like i said but once it loads and enters the main page there are errors after errors after errors its like the rom is corrupt or something. so tell me what else i can do?
Try to download the file again and reinstall or try to task 29 which wipes everything off your phone but not the sd card. Then install a fresh copy of magldr and repartition your phone again and try to install again. This is for installing the magldr version. I'm not experienced with clk. I just finished installing with no problem on magldr
Sent from my HD2 using xda premium
Are you installing through magldr or clk?
Sent from my HD2 using xda premium
mexicandroid said:
Are you installing through magldr or clk?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
HyperDroid 3.0 is only for cLK, it doesnt support MAGLDR (yet).
@OP : If you're trying to install it on MAGLDR I doubt it will work, even if it booted sure you will get force closes and whatnot.
Check the thread they just posted the magldr version. I'm running it right now that's why i'm asking to make sure you got the right version
Sent from my HD2 using xda premium
Are you installing any data as soon a you flash the rom from recovery? Don't install anything other than the rom and see if it works
Sent from my HD2 using xda premium
Oh yes under the section of the phone partition make sure you select the cache size of 5. It sets both of then at the same time
Sent from my HD2 using xda premium
Related
When I try to boot into recovery. It say : error error : invalid boot image header. And there is no more. Clock work recovery? It was there before. What could be the problem? Please help. Any information you need I can provide . Any thing helps thank you
Sent from my HTC HD2 using XDA App
Most probably it got corrupted somehow, try reflashing it again.
Magldr or clk?
Mgldr. Could it be because rom manager? I was hearing that was messing it up?
Sent from my HTC HD2 using XDA App
zayydubb said:
Mgldr. Could it be because rom manager? I was hearing that was messing it up?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
rom manager only works with clk from what ive read
Richy99 said:
rom manager only works with clk from what ive read
Click to expand...
Click to collapse
Hi,
ROM MANAGER only works with clk.
If you used it with magldr it is probably messed up.
You need to re-install magldr to get back to normal.
malybru said:
Hi,
ROM MANAGER only works with clk.
If you used it with magldr it is probably messed up.
You need to re-install magldr to get back to normal.
Click to expand...
Click to collapse
Yess I tried using it with magldr, so thats the problem, and how can I reinstall. Cwm with wiping my current rom or is that possible
Sent from my HTC HD2 using XDA App
zayydubb said:
Yess I tried using it with magldr, so thats the problem, and how can I reinstall. Cwm with wiping my current rom or is that possible
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
sorry but i do think its gonna wipe your phone if you re-install cwm. hope you did a backup before all went fubar!!
montecarlo5 said:
sorry but i do think its gonna wipe your phone if you re-install cwm. hope you did a backup before all went fubar!!
Click to expand...
Click to collapse
Nope I didn't. ;/
Sent from my HTC HD2 using XDA App
Just install a MAGLDR Rom and you will be fine... no need to do anything else.
ROMs in ROM manager are only compatible with cLK for now. The reason you got error when booting is because MAGLDR Roms use different /boot partition file system than cLK.
If you need do a backup from CWM and after flashing the new ROM go advance restore and select only data.img
I am trying to say your data weren't lost and you will not loose them after flashing new rom
zayydubb said:
Nope I didn't. ;/
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
That sucks! But on a good note, when you do re-install your rom and boot for the first time, sign in after touching that little green friend and google will re-install all your apps (without data thou) as long as you had auto sync on, that is,,,,
zach.antre said:
Just install a MAGLDR Rom and you will be fine... no need to do anything else.
ROMs in ROM manager are only compatible with cLK for now. The reason you got error when booting is because MAGLDR Roms use different /boot partition file system than cLK.
If you need do a backup from CWM and after flashing the new ROM go advance restore and select only data.img
I am trying to say your data weren't lost and you will not loose them after flashing new rom
Click to expand...
Click to collapse
How could I do a cwm back up if I can't even boot into it. ?
Sent from my HTC HD2 using XDA App
I don't USE MAGLDR and i don't know if this will work but you can try to delete all lines from CWM flash.cfg except the one where is recovery-raw.img and try flashing CWM from pc.
possible with a fix, or I have to reinstall/reformat everything?
zayydubb said:
How could I do a cwm back up if I can't even boot into it. ?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Did you manage to solve this issue, or you did a clean format/install?
I am also facing the same issue "invalid boot image header". Everything works fine beside ROM-backup(AD Recovery). Thanking you in advance.
i have been haveing trouble removing my google account while using hyperdroid by pongster. When i try to remove it it says that applications are dependant on the account and i need to factory restore. when i try to factory restore tthe phone just reboots. any solutions?
rjrohr -- never had same issue but with hyperdroid i had mms probles cant recieve or send (t-mobile netework) so what I did I flashed his latest rom the CM7, mms working no problem with it rigth now so far best battery and awesome stable build for my htc hd2. oh heres the link ....
http://forum.xda-developers.com/showthread.php?t=769026
rjrohr said:
i have been haveing trouble removing my google account while using hyperdroid by pongster. When i try to remove it it says that applications are dependant on the account and i need to factory restore. when i try to factory restore tthe phone just reboots. any solutions?
Click to expand...
Click to collapse
Just delete data via cwm.
Sent from my HD2
jose makalolot said:
Just delete data via cwm.
Sent from my HD2
Click to expand...
Click to collapse
forgive me for i am a newb, but can you explain how this is done?
than you
rjrohr said:
forgive me for i am a newb, but can you explain how this is done?
than you
Click to expand...
Click to collapse
Are you using magldr or clk?
Note: deleting data partition will delete all your data including apps and settings.
Sent from my HD2
jose makalolot said:
Are you using magldr or clk?
Note: deleting data partition will delete all your data including apps and settings.
Sent from my HD2
Click to expand...
Click to collapse
magdlr with cwm7 250 mb
rjrohr said:
magdlr with cwm7 250 mb
Click to expand...
Click to collapse
cwm7? Never heard that before.
If you know how to boot to ad recovery, that is, by pressing red/power button while phone is booting then choose Ad Recovery. Then choose wipe data and cache partition. This will restore back everything just like the first time you boot after installing the rom.
Again, wiping data and cache partition will delete all downloaded apps and user and syatem settinga. Be sure to make a backup.
Sent from my HD2
Thank you very much, I am doing all of this to sell this phone, so there is no real need to back up is there? Once again thank you
Sent from my T-Mobile G2 using XDA App
rjrohr said:
Thank you very much, I am doing all of this to sell this phone, so there is no real need to back up is there
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Better do a task29 then install radioand reinstall magldr or clk then install cwm then install rom. In short, start from scratch since you are selling it.
Sent from my HD2
If I was to clear the cache, then turn the phone off, wohld it just reboot like it was first flash. I have already sold it and I am trying to explain to the guy how to fix it so the easier ther better, cause he is more of a newb than I am
Sent from my T-Mobile G2 using XDA App
I received a brand new hd2 (my old one has the screen crack) I have flash many many phone N the hd2 is no exception, but this new hd2 is giving me a hard time. Once I flash the whole setup N I get to the point to flash my rom in CWR I choose the option to zip from sdcard but nothing appears, no folders no files.. Nothing. Now the sdcard is working because I'm able to see it with my other hd2. What do you guys think??? BTW I'm on magldr thanks
Sent from my HTC HD2 using XDA Premium App
Also I just flash the latest American android via DAF it went smooth....but I'm not happy with DAF!! LOL I want CWR!!
Sent from my HTC HD2 using XDA Premium App
So I'm at it again...did task29 also formatted my sdcard flashed everything once more then I get to CWR I go down to install from zip, press green button for yes then nothing!!! What could it be please help!!
Sent from my HTC HD2 using XDA Premium App
flash system partition with sd card still inside phone and that should work
It's working now, after trying N trying. I have no idea what solve the issue . All I know is that I flashed task29 so many times. never gave up..and now it's working thanks
Sent from my HTC HD2 using XDA Premium App
Using MAGLDR v1.13 & CMR 3.1. I've tried to flash - NexusHD2-IceCreamSandwich_Beta2 by tytung. I've wiped dalvik cache, wiped my data, & did a clean wipe of my SD card. I reboot into CWR in install & my phone keeps restarting. It never makes it to the boot animation screen. I've also had issues with a few other ROMs- But I'd rather focus on getting ICS on my HD2.
I'm using T-Moblie (US) HTC HD2
& I've followed the steps in the thread. http://forum.xda-developers.com/showthread.php?t=1354267
I'm still fairly new to XDA & just looking for some help to see if I've over looked something or need to go in a different direction.
Thanks to anyone that can help.
12-11-11 Flashed NexusHD2-IceCreamSandwich_Beta5
1) Phone freeze/runs slow.
2) Occasionally restarts (often during sms)
3) Also G+ app wont update - Error Package file was not signed correctly
Any ideas?
Did you make sure to flash the correct system partition sizes? That was a problem I had one time, I forgot to do that step.
I've tried. I'm not sure how to check that I did it correctly. What steps/tools do I used to get that done?
Derrell said:
I've tried. I'm not sure how to check that I did it correctly. What steps/tools do I used to get that done?
Click to expand...
Click to collapse
Firstly, why are you using beta2 when latest is beta5? Not saying thats is the problem, just that don't see why you would want to use outdated version.
Second, Get HD2 Toolkit, it has easy to use tools to do everything you need to prep HD2 for flashing.
If you already have magldr just use the repartition tool after entering USB Flasher mode in magldr and then re-partition to needed sizes then flash rom using cwm.
I'm still downloading beta5 & before I try this again with the latest version I want to get it done correctly. Is the repartition tool within my already installed magldr or is it from the hd2 tool kit. I ask this because I'd need some help using the toolkit. I've tried to use the partitioning feature on there and that's where things would've went wrong.
Thanks
TheATHEiST said:
Firstly, why are you using beta2 when latest is beta5? Not saying thats is the problem, just that don't see why you would want to use outdated version.
Second, Get HD2 Toolkit, it has easy to use tools to do everything you need to prep HD2 for flashing.
If you already have magldr just use the repartition tool after entering USB Flasher mode in magldr and then re-partition to needed sizes then flash rom using cwm.
Click to expand...
Click to collapse
Got it flashed. Thanks for the input. It got me on track.
Beta 2 had those problems you mentioned. Freezing and random reboots.
Sent from my NexusHD2 using xda premium
Also cLK has been working best with the new ics roms,: instead of magldr.
Sent from my NexusHD2 using xda premium
kylew1212 said:
Also cLK has been working best with the new ics roms,: instead of magldr.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
I'm not familiar with cLK. What's the steps I need to take to set this up? After using ICS I don't to roll back to my old ROMs.
Sent from my NexusHD2 using XDA App
Hi Guys,
I have currently Flashed ICS Beta 6 release by Tytung its working great yet I cant upgrade it to Beta 7 it just continues in the boot up animation for 30 minutes until i turn it off and Task 29 and reinstall Beta 6,
I am wondering if wiping the Delvik Cache will do anything to fix this?
I have a Australian HD2 from the Telstra Network if this helps... (i only say this as i found problems flashing to begin with, telstra wanting to lock everything)
I am new into the developer scene and want to help, but i have to have minimal posts before i do anything hahaha
Mag1.12, 1.13, clk support to cwm also you can clear Dalvik cache with cwm's category
Sent from my Desire using XDA App
HerbK said:
Mag1.12, 1.13, clk support to cwm also you can clear Dalvik cache with cwm's category
Sent from my Desire using XDA App
Click to expand...
Click to collapse
so am i able to do this running cLK?
sorry just saw that you said cLK lol
When your phone is booting, ta the home button. And your phone is enter to the cwm. So cwm support to clear Dalvik cache. Advance/wipe Dalvik cache. I'm using clk 1.3 now
Sent from my Desire using XDA App
Do u think this will solve my upgrade to beta 7 issue??
Sent from my NexusHD2 using xda premium
Sometimes I have a promblem with roms, I changed bootloader. So problem is always solved. I recommend change bootloader clk to magdlr
Sent from my Desire using XDA App
when you get into magldr, select option nr 8, to get into CLM there is option to wipe dalvik cache. (under advanced)
HerbK said:
Sometimes I have a promblem with roms, I changed bootloader. So problem is always solved. I recommend change bootloader clk to magdlr
Sent from my Desire using XDA App
Click to expand...
Click to collapse
Sitech10 said:
when you get into magldr, select option nr 8, to get into CLM there is option to wipe dalvik cache. (under advanced)
Click to expand...
Click to collapse
84DGR said:
Do u think this will solve my upgrade to beta 7 issue??
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Before your cLk boot loader boots, hold down the home key and go into CWM. once CWM is booted, volume down to advanced menu. Select wipe Dalvik Cache. then task 29 and reinstall everything. Beta 7 should boot then.
If you use MAGLDR with ICS your going to have problems. (if you don't have problems your lucky )
The scripts and things arn't really there for magldr.. the developers are recommending cLK. The reason is because of the connection differences.