hi there, my hd2 has radio 3.03 and ROM 3.14. from doing a bit of research on the forums I've found that i can run Android roms without needing to flash. however after trying a few different roms they all seem to freeze on the white htc screen even after leaving them go boot for around 30 mins. can anybody please help me with this issue?
appreciate any help given.
bump, anyone?
how do you run your rom?
Android folder on the root of the sd card?
First boot can take 15 minutes
I haven't heard of radio 3.03 it must be your spl.
I use radio 2.15 wich is stock with 3.14 roms
nickytheshaft said:
how do you run your rom?
Android folder on the root of the sd card?
First boot can take 15 minutes
I haven't heard of radio 3.03 it must be your spl.
I use radio 2.15 wich is stock with 3.14 roms
Click to expand...
Click to collapse
yeh i use an android folder on my sd card. and sorry my spl is 3.03, my radio is 2.15 and my rom is 3.14. even though i wait for about 30 mins, the phone doesnt boot up and just stays on the white htc screen...
any idea of where its going wrong?
can't boot android
I've got the same prob.After install it works great but after reboot it just hangs on white screen.
Plz help someone
Did you guys format your sd card to FAT32 and follow the correct steps:
http://forum.xda-developers.com/showthread.php?t=653614
What are your guys' stats in order to help properly.
So I have 3.03 SPL, 2.15 radio and 3.14 ROM. Can I run Android from my SD card without flashing anything?
Yes, definitely. I have SPL3.03, flashed the stock ROM (keeping the radio) to Dexter and installed MDJ Androoid builds. I guess you could skip the flashing with Custom ROM and install Android on the stock or flash to any ROM compatible with your radio. Look here to see how to flash w/o HSPL. http://forum.xda-developers.com/showthread.php?t=606713
I confirm
I tried to install Android but when I run it, a little bit of text appears for a couple of seconds and then it goes to the white htc screen and wont boot even after 40 minutes of waiting.
Do you have any idea why it doesnt boot please?
Did you try to format your µSD card? Probably you'll need to flash your ROM anyway, but flashing without HSPL do not void your garanty and do not cause problems with SPL3.03 RAM.
Try to hard reset your phone, format SD card and try again.
I need help to install american andriod SD build on my htc
I am doing fresh n clean installation after formating my 4GB sd card but when ever i try to install the build it runs and after appearing hTc logo it stuck on the screen and do not respond even for 20min i tried to do it after removing the battery.
please please help me in this matter
my Radio ROM is 2.10.50
masood8 said:
I need help to install american andriod SD build on my htc
I am doing fresh n clean installation after formating my 4GB sd card but when ever i try to install the build it runs and after appearing hTc logo it stuck on the screen and do not respond even for 20min i tried to do it after removing the battery.
please please help me in this matter
my Radio ROM is 2.10.50
Click to expand...
Click to collapse
Hi mate, I use SD American Android and it works well.
You should have SPL 2.08 HSPL
You need Radio 2.15.xx
And you need a custom rom that is compatible. As a reference, I use platinum series custom wm rom (check my sig below)
Reformat your micro sd with fat32. Dont put any files on there, except the Android files in the root of your sd card.
Dont forget to change the gps zone in the "Startup.cfg" to your location/country code
Leave it booting for 30 minutes..
I also thought that it wouldn boot, after almost 30 minutes it booted...
Dont give up mate
silverwind said:
You should have SPL 2.08 HSPL
And you need a custom rom that is compatible.
Click to expand...
Click to collapse
You do not have to have HSPL to run Android from SD card, HSPL is only needed if you are going to flash a custom Win Mo ROM, a stock Win Mo ROM that os not for your HD2, MAGLDR, cLK, or if you are going to run a Task 29. I ran three different Android SD builds before going NAND and never had HSPL on my HD2 until I got ready to flash MAGLDR.
Also you do not have to flash a custom ROM to run Android. You just want to have a 3.14 Win Mo ROM be it stock or custom. what matters is that ot is a 3.14 ROM. I ran all three Android SD card builds on a completely stock 3.14 ROM and never had any problems with them, except data drops which are just because they are SD builds.
Oh and by they way I accidently hit your thanks button trying to hit quote. lol
T-Macgnolia said:
You do not have to have HSPL to run Android from SD card, HSPL is only needed if you are going to flash a custom Win Mo ROM, a stock Win Mo ROM that os not for your HD2, MAGLDR, cLK, or if you are going to run a Task 29. I ran three different Android SD builds before going NAND and never had HSPL on my HD2 until I got ready to flash MAGLDR.
Also you do not have to flash a custom ROM to run Android. You just want to have a 3.14 Win Mo ROM be it stock or custom. what matters is that ot is a 3.14 ROM. I ran all three Android SD card builds on a completely stock 3.14 ROM and never had any problems with them, except data drops which are just because they are SD builds.
Oh and by they way I accidently hit your thanks button trying to hit quote. lol
Click to expand...
Click to collapse
ok brother let me try it. I will need ur guidence in any case of problem
thanks for the help
Up until now I have not had any issues with flashing ROMs and Radios. I've only done the radio once a long time ago, but several ROMs from WM6 through to Android.
I want to flash Leo_RADIO_2.12.50.02_2 but have also tried a few others with no success. When using the Windows CustomRUU the phone goes to the usual progress bar but stays on 0%. I have also tried renaming the ROM and trying to flash from the red blue green screen. This method hangs too with "Loading...".
The phone is on T-Mobile UK
SPL-2.08.0000
MAGLDR 1.13
ClockworkMod Recovery v3.0.2.5
TyphooN_v3.4.3
I think my current radio is 2.07 something but I don't seem to be able to find out...
I've been searching for a solution for hours and it's starting to get to me. Can anyone help please?
Do HSPL.
10 char
Edit:
How come you have MAGLDR installed and yet your SPL is 0000 ?
i'm flashing my radios using ksubedi's nand tool kit.can you give it a try?
mutil said:
i'm flashing my radios using ksubedi's nand tool kit.can you give it a try?
Click to expand...
Click to collapse
His SPL is 2.08.0000, stock SPL
I always just stick the radio on SD after naming it leoimg.nbh and fastboot
Sent from my HTC HD2
Thanks guys. I didn't realise it could revert back to stock. I've never flashed anything original/old so I have no idea why it did. Flashed both and everything is good. I have gained 2 bars of signal, can't be a bad thing.
I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash
Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.
try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !
So there is no fix i can do at home like flashing a specific rom or something else?
if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?
nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!
You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)
how about hardware reset with pressing 3 keys at the same time?
Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck
I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?