hi there, my hd2 has radio 3.03 and ROM 3.14. from doing a bit of research on the forums I've found that i can run Android roms without needing to flash. however after trying a few different roms they all seem to freeze on the white htc screen even after leaving them go boot for around 30 mins. can anybody please help me with this issue?
appreciate any help given.
bump, anyone?
how do you run your rom?
Android folder on the root of the sd card?
First boot can take 15 minutes
I haven't heard of radio 3.03 it must be your spl.
I use radio 2.15 wich is stock with 3.14 roms
nickytheshaft said:
how do you run your rom?
Android folder on the root of the sd card?
First boot can take 15 minutes
I haven't heard of radio 3.03 it must be your spl.
I use radio 2.15 wich is stock with 3.14 roms
Click to expand...
Click to collapse
yeh i use an android folder on my sd card. and sorry my spl is 3.03, my radio is 2.15 and my rom is 3.14. even though i wait for about 30 mins, the phone doesnt boot up and just stays on the white htc screen...
any idea of where its going wrong?
can't boot android
I've got the same prob.After install it works great but after reboot it just hangs on white screen.
Plz help someone
Did you guys format your sd card to FAT32 and follow the correct steps:
http://forum.xda-developers.com/showthread.php?t=653614
What are your guys' stats in order to help properly.
Related
Hi, I tried searching and I can't seem to find anything that helps. I followed all the instructions to install Android on my 1024LEO TMOUS and something just doesn't seem to be working. Regardless of the ROM, during first boot it goes through everything it has to go through and then gets stuck on either a black or a white screen with that has the HTC logo on it. I tried using a different WMo ROM and a different radio with no success. I also tried a different MicroSD card with no success. If I pull the battery and restart, it once again will get stuck at the same screen. Any ideas?
Check your Radio
i suggest Radio_2_14_50_04
http://www19.zippyshare.com/v/41922775/file.html
trangoul said:
Check your Radio
i suggest Radio_2_14_50_04
Click to expand...
Click to collapse
Installed that radio, formatted my memory card, entered a new Android installation process. Everything went smooth up until a black screen with the htc logo popped up yet again. Any other ideas?
I would actually flash the original t-mo package. This will flash the rom, radio, and spl back to factory. Its the same process as flashing radios and everything else. You just gotta find the package online.
------------------------------------------------------------------------------
From there or skipping the above i would format the sdcard using a full format and fat32 and copy your android folder to it. I recommend using hyperdroid 1.6
then Flash a hspl or hard spl
Next I would flash VBNDroidRC3 if you do not plan on using windows mobile. If you still want to use windows mobile skip this step.
Now you should flash a new radio. I recommend 2.12.50.02_2
Now before you attempt to boot android for the first time reset your phone. Power it off. Hold both vol up and vol down while pressing power. then press up to reset as the screen says, then vol up again to restart.
Video will look funky on first boot while booting. Once booted video will be normal. First boot can take up to 20 minutes for some people.
Just out of interest how long are you leavning the HTC logo screen there for? First boot can take a long time as it creates the data store (cache) for android to use and depending on the build and how fast your memory card is (class 4 for example) can take anywhere up to 20 mins in some cases to create.
FFVengeance said:
Installed that radio, formatted my memory card, entered a new Android installation process. Everything went smooth up until a black screen with the htc logo popped up yet again. Any other ideas?
Click to expand...
Click to collapse
I long did you wait after the HTC blackscreen popped up? Some build requires a minimum of 5-10 minutes, yet other requires 15-20 minutes.
Just did a full reformat, loaded HyperDroid V1.6 onto the memory card, started the installation process, and left for 35 minutes. Came back to a black screen with the htc logo on it.
My ROM is: |WWE|TMO Leo|¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21916 | 23138 |`·.¸¸.·´¯ Sense 2018 ¯)
Radio Version: 2.14.50.04 and I tried it with 2 other radio versions.
I used HSPL3 to flash the phone to SPL-2.08.HSPL.
I also tried using Chucky ROM and ended up with the exact same results. Starting to feel hopeless here
Try using HSPL2 instead and change your SPL-2.08.HSPL to 2.08.0000.
Then apply the official t-mobile update rom here: http://support.t-mobile.com/doc/tm54430.xml?
Then use HSPL2 and flash a hard SPL again. Then your wm rom, then radio, then run android for the first time.
Also do a full format of your memory card. not a quick format
FFVengeance said:
Just did a full reformat, loaded HyperDroid V1.6 onto the memory card, started the installation process, and left for 35 minutes. Came back to a black screen with the htc logo on it.
My ROM is: |WWE|TMO Leo|¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ | 21916 | 23138 |`·.¸¸.·´¯ Sense 2018 ¯)
Radio Version: 2.14.50.04 and I tried it with 2 other radio versions.
I used HSPL3 to flash the phone to SPL-2.08.HSPL.
I also tried using Chucky ROM and ended up with the exact same results. Starting to feel hopeless here
Click to expand...
Click to collapse
The HSPL3 could be your problem. I'm also running EnergyRom but with radio 2.12 and HSPL2. Everything runs great on my end.
Try using HSPL2 instead of HSPL3.
10507 said:
The HSPL3 could be your problem. I'm also running EnergyRom but with radio 2.12 and HSPL2. Everything runs great on my end.
Try using HSPL2 instead of HSPL3.
Click to expand...
Click to collapse
idk, that may be possible there, but im using HSPL3 with standard energy and 2.12.50 and all roms install.
Okay, so I installed the original T-Mobile US ROM. This made my SLP version 2.10.0000. I downgraded it to 2.08.0000 using HSLP3. Then I used HSLP2 to flash it to 2.08.HSLP. I flashed the Energy ROM and 2.12.50.02_2 radio. Tried to install a different Android ROM and it froze yet again at the HTC screen. I waited for about half an hour and pulled the battery. Only difference that I noticed now is that while the HTC screen was on, a green LED was flashing every few seconds. Windows Mobile works flawlessly though... I'm not giving up yet but I'm pretty close to it
I'm having the same issue after switching from the 16GB SD card that came with the HD2 to a 8GB class 4 card I had at home. Seems like something to do with the SD card imo. Any thoughts? I've tried a full format and the card appears to be working fine.
To FFVengeance
djstepanich said:
I'm having the same issue after switching from the 16GB SD card that came with the HD2 to a 8GB class 4 card I had at home. Seems like something to do with the SD card imo. Any thoughts? I've tried a full format and the card appears to be working fine.
Click to expand...
Click to collapse
I think he is onto something. Consider this:
Windows mobile works fine, all the flashing works fine. Try another sdcard and see if that works. Also I suggest you call t-mobile and request another sdcard. T-mobile admits that they were having issues with their sdcards not saving data or the phone having issues detecting them. Call them and say your memory card sometimes doesnt show as being detected and they should issue you a replacement card.
http://forum.xda-developers.com/showthread.php?t=797026&page=4
cant we run android on hd2 without flashing a new radio rom (if yes how??)
siddharth singh said:
cant we run android on hd2 without flashing a new radio rom (if yes how??)
Click to expand...
Click to collapse
not unless you want robo-voice on calls...
booting android
u still having problems what does ur startup text say...................
set cmdline " what does it say here "
Picked up a new SD card today, attempted to install a build that would previously get hung up on the black screen that said htc on it (NexusHD2) and as usual it ended up getting stuck at the very same screen again. I should point out though that I was able to get FroyoStone build working without any issues. I figured I'd screw around with the kernels and I ended up replacing the zImage used in the NexusHD2 build with the one used in FroyoStone build. It booted up! I got it running on my phone right now. I have yet to try this tactic out on other builds but for now I'll have to guess that this issue appears to be related to the kernel.
I can confirm that this issue was related to the kernel. Just had success installing HyperDroid 1.7 using the zImage from FroyoStone. Thank you to everybody who contributed. Hope this thread might be of assistance to someone in the future.
I've also had the HTC logo problem with starting Android. I've tried everything suggested but the only thing that helped and worked was formatting SD card with phone. I'm using Artemis WinMo ROM and it has an utility for SD card formatting. After I had formatted my SD card with that utility I've finally managed to start Android with any problems at all.
Cant't boot HTC logo on
I do have the same problem, i'm running ELEGANCIA SERIES on TMOB HD2 1024, my software is
OS version
5.2.23138 (23138.5.3.9)
Manila version
2.5.20181424.0
Rom
Elegancia V.50 Final WWE
Rom date
27/09/2010
Radio version
2.15.50.14
Protocol15.42.50.11U
Tried on 8gb 4 full formatted card, nothing. Also
my boot screen shows:
PB81120 HX-B3, SPL-2.08.HSPL 8G XE, 0X05, COTULLA HSPL, 0X40 AND SERIAL PORT ON THE BOTOM.
Any help will be mutch appreciat.
Thanks
I
So I have 3.03 SPL, 2.15 radio and 3.14 ROM. Can I run Android from my SD card without flashing anything?
Yes, definitely. I have SPL3.03, flashed the stock ROM (keeping the radio) to Dexter and installed MDJ Androoid builds. I guess you could skip the flashing with Custom ROM and install Android on the stock or flash to any ROM compatible with your radio. Look here to see how to flash w/o HSPL. http://forum.xda-developers.com/showthread.php?t=606713
I confirm
I tried to install Android but when I run it, a little bit of text appears for a couple of seconds and then it goes to the white htc screen and wont boot even after 40 minutes of waiting.
Do you have any idea why it doesnt boot please?
Did you try to format your µSD card? Probably you'll need to flash your ROM anyway, but flashing without HSPL do not void your garanty and do not cause problems with SPL3.03 RAM.
Try to hard reset your phone, format SD card and try again.
I need help to install american andriod SD build on my htc
I am doing fresh n clean installation after formating my 4GB sd card but when ever i try to install the build it runs and after appearing hTc logo it stuck on the screen and do not respond even for 20min i tried to do it after removing the battery.
please please help me in this matter
my Radio ROM is 2.10.50
masood8 said:
I need help to install american andriod SD build on my htc
I am doing fresh n clean installation after formating my 4GB sd card but when ever i try to install the build it runs and after appearing hTc logo it stuck on the screen and do not respond even for 20min i tried to do it after removing the battery.
please please help me in this matter
my Radio ROM is 2.10.50
Click to expand...
Click to collapse
Hi mate, I use SD American Android and it works well.
You should have SPL 2.08 HSPL
You need Radio 2.15.xx
And you need a custom rom that is compatible. As a reference, I use platinum series custom wm rom (check my sig below)
Reformat your micro sd with fat32. Dont put any files on there, except the Android files in the root of your sd card.
Dont forget to change the gps zone in the "Startup.cfg" to your location/country code
Leave it booting for 30 minutes..
I also thought that it wouldn boot, after almost 30 minutes it booted...
Dont give up mate
silverwind said:
You should have SPL 2.08 HSPL
And you need a custom rom that is compatible.
Click to expand...
Click to collapse
You do not have to have HSPL to run Android from SD card, HSPL is only needed if you are going to flash a custom Win Mo ROM, a stock Win Mo ROM that os not for your HD2, MAGLDR, cLK, or if you are going to run a Task 29. I ran three different Android SD builds before going NAND and never had HSPL on my HD2 until I got ready to flash MAGLDR.
Also you do not have to flash a custom ROM to run Android. You just want to have a 3.14 Win Mo ROM be it stock or custom. what matters is that ot is a 3.14 ROM. I ran all three Android SD card builds on a completely stock 3.14 ROM and never had any problems with them, except data drops which are just because they are SD builds.
Oh and by they way I accidently hit your thanks button trying to hit quote. lol
T-Macgnolia said:
You do not have to have HSPL to run Android from SD card, HSPL is only needed if you are going to flash a custom Win Mo ROM, a stock Win Mo ROM that os not for your HD2, MAGLDR, cLK, or if you are going to run a Task 29. I ran three different Android SD builds before going NAND and never had HSPL on my HD2 until I got ready to flash MAGLDR.
Also you do not have to flash a custom ROM to run Android. You just want to have a 3.14 Win Mo ROM be it stock or custom. what matters is that ot is a 3.14 ROM. I ran all three Android SD card builds on a completely stock 3.14 ROM and never had any problems with them, except data drops which are just because they are SD builds.
Oh and by they way I accidently hit your thanks button trying to hit quote. lol
Click to expand...
Click to collapse
ok brother let me try it. I will need ur guidence in any case of problem
thanks for the help
hi guys i hvae flashed wp7 rom on hd2 tmo i have done every thing that is needed to run the wp7 but when ever i boot it stucks on htc logo boot screen please help
does any one has answer for it help guys i m waiting
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
tictac0566 said:
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
Click to expand...
Click to collapse
i tried but its still the same i tried flashing it with three diff memory card but it still stuck on htc boot screen
TMOUS?
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
stepthehen said:
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
Click to expand...
Click to collapse
i did every thing i m using tmo usa i did t9,hspl,correct radio,magldr,and try to install 3 roms all the roms stucking at boot screen i also tried to change the sd cards but still the same results i m try to solve it from past 3 days guys help me
Stickies
Read the stickies in development forum. I think you need seperate ROMs for TMOUS. Maybe also different HSPL, and MagLdr. I don't know what you flashed or what you should have flashed, so you need to read everything the people in the know have written.
Stuck on HTC screen as well!
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
aesarius said:
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
Click to expand...
Click to collapse
What version of HSPL did you install?
And about WP7, did you installed from the bootloader or MAGDLR USB Flash?
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
aesarius said:
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
Click to expand...
Click to collapse
No my friend i will go with sd card problem ... i had same problem it will stock at htc logo ... tried couple sd card 7 of them and i works with 1 gig sd card memory
Up until now I have not had any issues with flashing ROMs and Radios. I've only done the radio once a long time ago, but several ROMs from WM6 through to Android.
I want to flash Leo_RADIO_2.12.50.02_2 but have also tried a few others with no success. When using the Windows CustomRUU the phone goes to the usual progress bar but stays on 0%. I have also tried renaming the ROM and trying to flash from the red blue green screen. This method hangs too with "Loading...".
The phone is on T-Mobile UK
SPL-2.08.0000
MAGLDR 1.13
ClockworkMod Recovery v3.0.2.5
TyphooN_v3.4.3
I think my current radio is 2.07 something but I don't seem to be able to find out...
I've been searching for a solution for hours and it's starting to get to me. Can anyone help please?
Do HSPL.
10 char
Edit:
How come you have MAGLDR installed and yet your SPL is 0000 ?
i'm flashing my radios using ksubedi's nand tool kit.can you give it a try?
mutil said:
i'm flashing my radios using ksubedi's nand tool kit.can you give it a try?
Click to expand...
Click to collapse
His SPL is 2.08.0000, stock SPL
I always just stick the radio on SD after naming it leoimg.nbh and fastboot
Sent from my HTC HD2
Thanks guys. I didn't realise it could revert back to stock. I've never flashed anything original/old so I have no idea why it did. Flashed both and everything is good. I have gained 2 bars of signal, can't be a bad thing.