Related
I have a Mogul. That was Running 2.17 Official, tried to install DCD 2.1.0SPRINT, Said it installed successfully, on reboot it GETS STUCK IN HTC BLACK SCREEN. I tried to run RUU, GET ERROR 260. I can't connect through activesync either, Then I read To try to flash through SDCARD the official 2.17 renamed To TITAIMG. IT GET STUCK IN LOADING SCREEN, WHICH I LEFT RUNNING FOR OVER A HOUR, I ran out of ideas, and I hope I didn't brick My month old phone PLEEEEEEEEEEAAAAAAAAASE HELP ME
Did you not read any directions or other posts?
You need to make sure you have the new radio, otherwise any rom that is 3.16 based will do this.
Flash original 3.16 to get the radio on the phone then do DCD's rom.
Also, try not to post retarded type like that makes it really hard to understand what your trying to say.
THANKS
Well thanks I guess, and I ll will try
Go into bootloader mode before flashing to ensure a good flash.
That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe
JonnyBoy313 said:
That has to be a .nbh renamed To TITAIMG right, and if so do you have a link. For some reason mine is a .exe
Click to expand...
Click to collapse
Open it up with winrar (or similar) to get the nbh file. Dude this is all pretty obvious stuff remember to do some more research into the device and its quirks before doing anything else
Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.
JonnyBoy313 said:
Man I looked In the winrar, And only 1 thing is in there and it was
3.16.651.0.exe. That is why I asked for a link to the right one, and I reaserched this and other sites for four days before I tried this.
It was the best I can do without hands on, Sorry to be such a burdan.
But I though this site would help me.
Click to expand...
Click to collapse
Extract the exe then take a look inside that one?? We aim to help all users but it is a two way process dude
Not sure if I have A good version of 3.16
sorry I dont know tried to open but a little black screen flashed.
Should i look for a different 3.16 rom.
Every other rom I have Has a .nbh
yea my 3.16 must not be real. Might be a dumb question, but I just want to ask. Can you flash a .exe on your phone
Sorry for any confusion, Can flash .exe through sc card
Your making it harder than it is.
1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start
Fixed your phone in 4 steps.
cohowap said:
Your making it harder than it is.
1) Extract the exe via winrar.
2) Manually enter bootloader mode
3) Run the upgrade from a Windows XP Machine to be safe (just run the exe).
4) Let the device start
Fixed your phone in 4 steps.
Click to expand...
Click to collapse
Don't forget step 1.5: Connect the phone to the USB port on the Windows XP machine.
Hi there, i have some problem regarding flashing the ROM..
Currently i am using WM 6.1 for my HTC VIVA..and i wish to flash it to WM6.5..
But i dont know the correct way...
Anyone can help me up?
whats the issue in it its easy just download it connect ur phone with the pc sync it and run the exe
it will simply guide u through the procedure
please note data will be lost from ur phone memory
me too. im confused. please help
Flashing your Viva
Hey guys, I'm a newbie here also and you are right, it is confusing. But here's what I've been able to figured out.
Go to this thread and download the file Opal_HardSPL_v2_0.zip.
When you uncompress this file you'll find see the file Opal_HardSPL_v2.exe. This program is what you use initially to flash the ROM of your Viva so that it's able to be Flashed with newer ROMs.
Download the ROM of your choosing. Sorry, can't help you much here. There are a lot of different ROMs out there and everyone's tastes are different.
Some of the ROMs that you download come with an installation program and some do not. After un-compressing your downloaded ROM if all you have is the single file RUU_signed.nbh then all you have is a ROM.
If you need an ROM update program there are a few out there to choose from. Here is a link to one that you can use.
If your ROM didn't come with an instalation program then copy it into the directory with the installation program you just downloaded and uncompressed.
You need to have your Viva connected and synced to you computer before continuing. Once this is done Flash your Viva with Opal_HardSPL_v2.exe that you previously downloaded.
Re-sync your Viva to the computer.
Flash your Viva by double clicking the ROM Update utility executable.
It takes about 10 minutes or so, be patient. Your Viva will reboot when the Flash is complete and you then just follow the instruction of the screen.
I think that about covers it. If anyone has any suggestions or updates or knows of something that I forgot to mention then please post a response.
Thanks
thanks for easy and quick steps, but i dont have guts to flash my touch viva.
Hi Guys,
I'm kinda stuck here, hope you'll be able to help:
Situation is as follows:
I have an HTC Leo, and after 2 months of usage - got the white screen:
1. Tried soft reset - no good
2. Tried hard reset - no good
3. Cannot sync to PC with ActiveSync - does not detect the device
4. Can go to boot mode, but only with voulme down+soft reset button
5. Cannot sync in boot mode as well - there appears to be a "USB" writing at the bottom, (white line on boot mode) though ActiveSync does not detect via usb?
6. Tried to install HSPL2 - starts to install, never finishes, proggress bar goes up and down forever (on PC) - I believe device needs to be synced before installing?
7. Device is enabled in the device manager, though cannot explore - thus no access to SD card
8. Here we go, I seem to do something wrong, PLEASE HELP, I payed for the device about 400E in my country, stock warranty is not an option
9. HEEEEEEEEEELP
10. Thanks!!!
Try flashing the stock ROM for your HD2 via SD card. If you have a T-Mobile HD2 then go to T-Mobile.com to download the ROM you will have to enter the IzmEI number from under your battery to download it. If you have a international HD2 go to HTC.com and enter your serial number that is under your battery to getca list of ROMs you can download and install on your HD2. If the ROM is a .exe you will have to right click it and renamecthe file .zip to view the contents. After that follow the instructions in the thread linked below to flash the ROM.
http://forum.xda-developers.com/showthread.php?t=681317
[Q] Thanks
Hi, thanks for the info,
When I go to HTC homepage, i find "Rom Upgrades" - is that the same as the ROM itself?
Sorry if the q is dum ,I'm completely new in this
And also - does the card have to be empty (only ROM in) so that the phone boots it?
Thanks again
yasho1984 said:
Hi, thanks for the info,
When I go to HTC homepage, i find "Rom Upgrades" - is that the same as the ROM itself?
Sorry if the q is dum ,I'm completely new in this
Click to expand...
Click to collapse
Yeah that is what you are looking for. The ROM upgrades is the most recent official ROMs out for the HD2. Just make sure you use your serial number to make sure you get a ROM that is for your HD2 or you will not be able to flash it unless you get HSPL on your HD2. Also make sure the HTC site you are on is for your part of the world, your country or the country the HD2 originated from.
[Q] Hi again, last q
When I Explore the contents of the rom I see numerous files, and reading the instructions you linked tells me to rename an image. The ROM is an exe, so I renamed it to zip , explored and currently I see only one .nbh file:
RUU_signed.nbh
Should I rename this one to LEOIMG.nbh and copy this file only to SD card? Or rename and leave there, take the whole exe and put it into the SD Card?
Would that be sufficient to run the ROM in bootload?
Thanks again brother, you're a lifesaver
yasho1984 said:
When I Explore the contents of the rom I see numerous files, and reading the instructions you linked tells me to rename an image. The ROM is an exe, so I renamed it to zip , explored and currently I see only one .nbh file:
RUU_signed.nbh
Should I rename this one to LEOIMG.nbh and copy this file only to SD card? Or rename and leave there, take the whole exe and put it into the SD Card?
Would that be sufficient to run the ROM in bootload?
Thanks again brother, you're a lifesaver
Click to expand...
Click to collapse
Just take and copy the RUU_signed.nbh file make a copy ofcthe file and past it to your desktop and then rename it to LEOIMG.nbh then copy that file to the root of your SD card. All you have to have is the .nbh file but it has to be named LEOIMG.nbh.
You can also flash a radio, splash screen, and MAGLDR this way if need be. But you would still have to flash CWM via custom RUU via USB if you installed MAGLDR.
[HIHI]
Great - now "Radio fail" - update terminated... any ideas?
Exact error description:
00018003
LEOIMG.nbh - Fail
RADIO - Fail
Update Terminate
UPDATE FAIL
and this is an official HTC ROM?!?
yasho1984 said:
[HIHI]
Great - now "Radio fail" - update terminated... any ideas?
Exact error description:
00018003
LEOIMG.nbh - Fail
RADIO - Fail
Update Terminate
UPDATE FAIL
and this is an official HTC ROM?!?
Click to expand...
Click to collapse
Sorry I had to get some sleep, anyway I suggest you first make a backup copy of your SD card and then reformat your SD card using the Panosonic Mick SD card formatting software, just Google it you will find it. Do a full wipe of hour cardcand format it using Fat 32. Then copy the LEOIMB.nbh to your card and try it again. Also try to use a card no bigger than a 8GB as bigger SD cards are prone to give people problems when flashing via SD card. Note I did not say they will notcflash a ROM, bit they sometimes give people trouble.
Also I forgot to tell you this morning that if your HD2 says USB in the white bar of bootloader and it also says HTC USB sync in the device manager in the control panel of your computer, then you have a Sync connection to your computer but you can not use this connection for anything bit to flash different software to your HD2.
[Q] Hi Buddy, 10x for staying so long :)
Sorry brother,
I really appreciate your help so far.
Same Sh*t - even after FAT 32 format
When tried to upgrade with the official HTC ROM - "RUU_signed...." (not via SD) HTC boot screen appeared, but after 1% said : Image corrupted". It coud be that the stock rom sucks big time. May be try with some Artemis?
yasho1984 said:
Sorry brother,
I really appreciate your help so far.
Same Sh*t - even after FAT 32 format
When tried to upgrade with the official HTC ROM - "RUU_signed...." (not via SD) HTC boot screen appeared, but after 1% said : Image corrupted". It coud be that the stock rom sucks big time. May be try with some Artemis?
Click to expand...
Click to collapse
Yeah maybe you got a bad download of the ROM. If that was the only official ROM you could down load. I would try to download it againcand delete the first copy you downloaded, or I would flash HSPL. to my HD2 and then try to flash the stock ROM are a custom ROM. Custom ROMs are better than stock ROMs anyway. Just remember though if you have a warranty and you need to send your HD2 in for warranty work or exchange you need to revert your HD2 back to complete stock. This means ROM, radio, and SPL.
Hello,
So i my HTC HD2 finally got repaired
My SPL : 3.03.0000
Is it still possible to install android on it?
Ty,
Guppie11
Read this:
http://forum.xda-developers.com/showthread.php?t=1021837
Kailkti said:
Read this:
http://forum.xda-developers.com/showthread.php?t=1021837
Click to expand...
Click to collapse
Thanks
Was reading a old 1 i guess.
I will try this.
Btw i need help :
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.
So this mean i can't run Android!?
guppie11 said:
Thanks
Was reading a old 1 i guess.
I will try this.
Btw i need help :
Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.
So this mean i can't run Android!?
Click to expand...
Click to collapse
Easy answer... yes you can.
Look for the hspl4 tool and run it like you would run a rom upgrade. Make sure you have active sync working, meaning connection with your computer.
In the hspl4 tool you need to select hspl2.08 in the dropdown menu.
It will take a couple of seconds and should do no harm.
Some easy pointers in the correct order.
-radio should be ok since they flashed the latest rom
-install magldr
-install clockwork via 'usb flasher' mode in magldr
-install the correct partition size (depending on rom you want)
-place rom zip on sd-card and install via clockwork
reboot and go
Hi,
It's all explained pretty well here:
http://forum.xda-developers.com/showthread.php?t=893948
with links to the bits you need.
malybru said:
Hi,
It's all explained pretty well here:
http://forum.xda-developers.com/showthread.php?t=893948
with links to the bits you need.
Click to expand...
Click to collapse
This is NAND i am trying to reinstall SD because i like that more
lukesan said:
Easy answer... yes you can.
Look for the hspl4 tool and run it like you would run a rom upgrade. Make sure you have active sync working, meaning connection with your computer.
In the hspl4 tool you need to select hspl2.08 in the dropdown menu.
It will take a couple of seconds and should do no harm.
Some easy pointers in the correct order.
-radio should be ok since they flashed the latest rom
-install magldr
-install clockwork via 'usb flasher' mode in magldr
-install the correct partition size (depending on rom you want)
-place rom zip on sd-card and install via clockwork
reboot and go
Click to expand...
Click to collapse
Got another question
I want to run on a SD Rom.
So if i can remember i only need to install HSPL right?
And my phone is connected to my comp so i guess that aint a problem
guppie11 said:
Got another question
I want to run on a SD Rom.
So if i can remember i only need to install HSPL right?
And my phone is connected to my comp so i guess that aint a problem
Click to expand...
Click to collapse
Euhm if you want to run it from a sd-card you don't need to do anything!!!
lukesan said:
Euhm if you want to run it from a sd-card you don't need to do anything!!!
Click to expand...
Click to collapse
Well i do :O
Because it doesn't want to run the haret.exe etc :O
Like before my phone got destroyed.
UPDATE : I will try another ROM maybe that is the problem.
guppie11 said:
This is NAND i am trying to reinstall SD because i like that more
Click to expand...
Click to collapse
Hi,
Sorry,it wasn't clear...
For SD look here:
http://forum.xda-developers.com/showthread.php?t=931192
Ok the new build is working
Thanks all
--------------------------------------------------------------------------------
i have just bought the htc hd2 and want it to run andriod but i dont know which one to download or even where to download from.
i have spend many hours reading and still no closer to what i need is it gingerbread 2.3 , froyo which is the best one to use and help getting the right u.k radio
what software and radio should my phone be??/
i have took a look at the guide on here and dont have a clue where to start as im not to good stuff like this and dont want to brick my phone.
is there a video guide around someone could send me a link to
any help would be great sorry for the silly questions
i know my way around a pc and im willing to have ago.
wolfie1981 said:
i have just bought the htc hd2 and want it to run andriod but i dont know which one to download or even where to download from.
i have spend many hours reading and still no closer to what i need is it gingerbread 2.3 , froyo which is the best one to use and help getting the right u.k radio
what software and radio should my phone be??/
i have took a look at the guide on here and dont have a clue where to start as im not to good stuff like this and dont want to brick my phone.
is there a video guide around someone could send me a link to
any help would be great sorry for the silly questions
i know my way around a pc and im willing to have ago.
Click to expand...
Click to collapse
first check the SD builds forum - easier as no flashing required, then pick one (e.g. ACA my personal favorite), read the installation instructions (usually just create Android folder on your SD card, then copy the build there), then run using any file manager clrcad.exe and haret.exe which are the android folder, wait for 10-30 minutes until 1st boot is finished, and done
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
wolfie1981 said:
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
Click to expand...
Click to collapse
links are marked by brownish font by default, check my previous post,
as for SPL, HSPL etc., you don't need to bother as long as you run Android from SD, that's the beauty of SD builds, enjoy full functionality of android, without the hassle and risk of bricking your device
some general FAQs here and here, but if you want to start fast, you can read those later, installing an SD build is safe
wolfie1981 said:
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
Click to expand...
Click to collapse
That SPL and radio version are fine, just download the ROM, extract it, click on CLRCD, then HARET, then you're running Android.
And ACA is by far the best ROM you're going to find
i cant find the links for what i need to download
can someone post direct links for the rom i need please
this is my phone info..
os version
5.2.21913 (21913.5.0.94
manila version
2.520181527.0
rom version
3.14.405.2 (04666)WWE
ROM DATE 09/29/10
radio 2.15.50.14
protocol version 15.42.50.11u
many thaks to you all for the help
wolfie1981 said:
i cant find the links for what i need to download
can someone post direct links for the rom i need please
many thaks to you all for the help
Click to expand...
Click to collapse
d/l ACA from here: http://forum.xda-developers.com/showthread.php?t=957652, post #1, section "Downloads, once you have the file "AmeriCanAndroid 072511(sd).7z" unpack it, and copy the folder Android to the root of your SD Card, then run clrcad, then haret, then ... enjoy
just ran clrcad, then haret, and its sat on a gray screen thats say american andriod been like this for 10mins any clue's on what its doing???
wolfie1981 said:
just ran clrcad, then haret, and its sat on a gray screen thats say american andriod been like this for 10mins any clue's on what its doing???
Click to expand...
Click to collapse
first boot can take up to 20-30 minutes, as the data file (default = 2GB) is created, if nothing happens after that time, remove the battery (fastest way of resetting the device) and try again
p107r0 said:
first boot can take up to 20-30 minutes, as the data file (default = 2GB) is created, if nothing happens after that time, remove the battery (fastest way of resetting the device) and try again
Click to expand...
Click to collapse
I thought it was a 1gb default
orangekid said:
I thought it was a 1gb default
Click to expand...
Click to collapse
you're right
p107r0 said:
you're right
Click to expand...
Click to collapse
lol no need for 2, I use 1gb and lots of big apps and still have 400 free.
but yeah, ACA is the best ROM for your money, even better than any NAND rom I've used
got it working well happy!!! is there anythink i need to after its up and running??
also if i power will i have to reinstall
thank you to everyone that helped
got it working thank you all for the help
is there anythink i need to do once up and running???
can i install apps to my sd card and not the phone as i have a 16gb card
wolfie1981 said:
got it working well happy!!! is there anythink i need to after its up and running??
also if i power will i have to reinstall
Click to expand...
Click to collapse
what's more to know for the start?
- no need to reinstall from now on, it's just that for now your device will always restart to WinMo, however: find yourself so called "android loader" to automate android loading, there's few of those to choose from, e.g. Android Loader v6.0
- connect android with your google account so your contacts and emails are synced (Settings / Accounts etc...)
- install Battery Monitor Widget, so you always know how much mA your device uses and how much battery is left,
- also search xda for tips on conserving battery power (e.g. disable 3G if not needed, switch off GPS, tweak backlight autobrightness in CM Settings etc.)
- be aware that for now the USB file transfer does not work, to copy files to your HD2 use WinMo or Card Reader or File Expert
- backup often: 1. invest in Titanium Backup, 2. from time to time copy data.img to your PC
- browse through the ACA FAQ and thread (I know it may be hard to read all 14995 messages at once)
wolfie1981 said:
can i install apps to my sd card and not the phone as i have a 16gb card
Click to expand...
Click to collapse
All apps are installed on your card, the whole idea of an SD build is that WinMo still sits in ROM, while Android basically consists of two files (sitting in the SD\Android folder) which are mounted at the start: system.ext2 (all system files and apps) and data.img (all user apps and settings). From user point of view you won't notice the difference. Additionally, once you run out of space in your data.img, you can always resize it, there are tools for that, but lets put it aside for now
do you have a link for the andriod bootloader??/
is it easy to install
many thanks
wolfie1981 said:
do you have a link for the andriod bootloader??/
is it easy to install
Click to expand...
Click to collapse
all links are in my previous post, click on the brown text "Android Loader v6.0" to open,
installation is standard for WinMo: while in Windows Mobile, copy the .cab file to your SD Card and run from within any file manager, then it will guide you, also when in doubt search its thread for more info
i have downloaded it there is no cab file when i extract it from the zip folder.
wolfie1981 said:
i have downloaded it there is no cab file when i extract it from the zip folder.
Click to expand...
Click to collapse
you have this file: File Type: mskip_Android_Loader_V6.0 Final.cab? that's the one, do not try to unpack it on your PC, just copy to SD Card and then run from there
the rar file dont show on the sd card??
do i have to be in winmo for this