Database Users

This is the easiest way to flash!!!

This is how I've done it and it's my third rom in 5 days.
1. Format you micro SD to FAT32 using a USB card reader, not quick format preferably
2. Read CID from your SD with Qmat while connected with active sync
3. Get Gold Card using QMat with the CID obtained, you should have in 2 min
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
WORKS LIKE CHARM
RKS LIKE A
MY HD2 - east european unbranded
PS you can flash both your regional rom or any other rom

...except that it's been said hundred of times in the stycky threads.

wmfreak said:
This is how I've done it and it's my third rom in 5 days.
1. Format you micro SD to FAT32 using a USB card reader, not quick format preferably
2. Read CID from your SD with Qmat while connected with active sync
3. Get Gold Card using QMat with the CID obtained, you should have in 2 min
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
WORKS LIKE CHARM
RKS LIKE A
MY HD2 - east european unbranded
PS you can flash both your regional rom or any other rom
Click to expand...
Click to collapse
Are you joking? OMG. Please look to to "Sticky"-Threads before opening a new Thread.
http://forum.xda-developers.com/showpost.php?p=5038443&postcount=1
Cause you are a new user, you should take a look at this video:
http://www.albinoblacksheep.com/flash/posting
It will help you to understand how a community works.
Mod, please close.

The OP has condensed & removed all the bumpf from the link, sometimes too much information is confusing to a LOT! of people. Cost? 2 cents!

Pailea said:
The OP has condensed & removed all the bumpf from the link, sometimes too much information is confusing to a LOT! of people. Cost? 2 cents!
Click to expand...
Click to collapse
There's a difference between condensed and incomplete. The post doesn't even mention where to get QMAT, or were to apply for the actual goldcard. The least OP could've done was post a link to the sticky thread.
Aside from that, I would personally advise easily confused people to stay away from QMAT, especially if all they have is half a tutorial.

Thank you. Clear and simple. (Have to combine information from the sticky post
http://forum.xda-developers.com/showthread.php?t=591314
as well thought)
Will try it later on.
UPDATE
After trying unsuccessfully for more than two weeks to flash a different language ROM, and reading this post I have managed to flash the new 1.6x ROM in 5 minutes.
Notes
Used the same MicroSD card I have been using unsuccessfully the last two weeks, and the same goldgard I had for two weeks now.
The goldcard remains the same no matter how many times you format the SD, and immediately after the completion of the installation of the new ROM needs reformat. Can be reused as many times as we want I guess.
THANK YOU

crazy cat said:
Are you joking? OMG. Please look to to "Sticky"-Threads before opening a new Thread.
http://forum.xda-developers.com/showpost.php?p=5038443&postcount=1
Cause you are a new user, you should take a look at this video:
http://www.albinoblacksheep.com/flash/posting
It will help you to understand how a community works.
Mod, please close.
Click to expand...
Click to collapse
New user dude?
It appears that we joined about the same time. It was meant to help the new people not annoy "know it all" people like you. It must have gotten to your head. Just remember you were a "new" once too.

Apparently i did something similar to your way, and it works. The way posted in the Guide is not working for many people, this might be a good option for those who are at the brink of giving up to flash their device to 1.61.

This works! I didn't even format my SD card! Thank you

does not work for me. I have tried all combination, all possible thing. still not working.

Hi wmfreak.
Worked first time and so easy. Was going to try the long winded hex editor etc way but this was much easier.
No format of SD card required either as stated above!
THANK YOU!
What i did...
1) Downloaded qmat from link at top of the page... http://forum.xda-developers.com/showthread.php?t=591239
2) Downloaded getsdsn1_leo.zip from http://forum.xda-developers.com/showpost.php?p=5169107&postcount=109
3) Installed qmat to PC
4) Extracted getdns_leo.zip with exe to desktop.
5) Ensure phone connected in sync mode (not drive mode) and ensure synced (with either activesync (win xp) or mobile device center (vista/win7)
6) Run exe from getdns on desktop whichs dump A txt file with CID to desktop.
7) Registered my CID and email as per top link on http://forum.xda-developers.com/showthread.php?t=591239
8) Recieved img file from register and saved to PC.
9) Ran Installed QMAT Program from Pc with Phone still synced to PC
10) In QMAT ran Menu >Hardware Forensics>WINCE SD Card Utils
11) Pressed button <Get SD Card Serial and Disk ID>
12) Once the ID was found I pressed button <Write ImageFile> in same dialog box.
13) Searched for my previously saved from email .img file called goldcard.img
14) BINGO! Gold IMG wrote successfully to card.
15) Downloaded 1.61 ROm from these forums and ran exe from rar from pc and off it went updated with no issue in normal rom update method!!!
P.S UK user with unlocked SIM phone.
UPDATE: Just relised u dont need the getdns_leo.zip - just run qmat to step 11 then register for the GOLDid and come back to qmat to write img!!

I too succesfully flashed to the TUR version from WWE West Europe version. I followed the guide on page 30 on the 1.61 WWE TUR thread, which essentialy is the same thing.
Thnx, I appreciate your post!
Grtz
Lukas

citrix80 said:
does not work for me. I have tried all combination, all possible thing. still not working.
Click to expand...
Click to collapse
In active sync connection, Just try extracting the new rom package to a desktop folder and run rom update from that folder

Jmarley said:
In active sync connection, Just try extracting the new rom package to a desktop folder and run rom update from that folder
Click to expand...
Click to collapse
TIP. I did not extract the new ROM package. I executed the Turkish ROM as it was from my desktop and worked fine.

don_theo said:
TIP. I did not extract the new ROM package. I executed the Turkish ROM as it was from my desktop and worked fine.
Click to expand...
Click to collapse
hum.. I did not extract the ROM file. I just start execute the ROM image I downloaded, it start to flash, the phone automatically turn into bootloader, then phone show the percentage, at 1%, it stopped, phone reboot, screen on pc, says ''invalid vendor ID".
I have tried 2 different SD card. all possible combinations. still not working.

citrix80 said:
hum.. I did not extract the ROM file. I just start execute the ROM image I downloaded, it start to flash, the phone automatically turn into bootloader, then phone show the percentage, at 1%, it stopped, phone reboot, screen on pc, says ''invalid vendor ID".
I have tried 2 different SD card. all possible combinations. still not working.
Click to expand...
Click to collapse
Hello, that is why I combined information from the sticky thread
http://forum.xda-developers.com/showthread.php?t=591314
Probably you have to
--a: install a regedit software on your Leo e.g. PHM regedit original PHM Site (offline at the moment)
--b: Run the regedit software
--c: Goto HKEY_LOCAL_MACHINE\Security\Policies\Policies
--d: Look for 00001001 double click it and change the setting from 2 to 1
--e: Reboot the HTC LEO
and from this thread
4. Write GoldCard image to SD using Write Image in Qmat, while connected using active sync
5. Run the stock ROM of your choice form your desktop and you're done!!!
This the the procedure that worked for me. (steps for obtaining a GoldCard not mentioned here).
Good Luck.

worked for me too,

sorry for being thick guys but....if i flash my rom do i have to use the same memory card as what im using now or can i use another just to flash??
obviously using the one i have now i will delete all of my apps when formatting??

Use another sd
Correct, or backup your current sd.
waiting2lose said:
sorry for being thick guys but....if i flash my rom do i have to use the same memory card as what im using now or can i use another just to flash??
obviously using the one i have now i will delete all of my apps when formatting??
Click to expand...
Click to collapse

Same here:
Got the goldcard.img from qmat directly saved onto SD card and tried to flash the official HTC_GER_1.48 onto my VDF device. Vendor error, can't flash

[Tutorial]Beginner Android setup

Hey, since there is many requests for how to setup the android on you'r HD2, i was thinking "why dont i make one?" So here it is.
PS!!! My english is not the greatest.
First download this radio if you dont have it (recomended): 2.10.50.08_2
And install it, boot up you'r HD2. A stable ROM is also recomended.
Second download one of the builds from: Here
Third: Clear you'r SD card (Only if you have a low mb sd card) You dont really have to, but if you do, u might get some smoother speed.
Four: Extract the build you downloaded to you'r desktop on you computer and Copy the files inside the folder you extracted to. ALL files. and past them into you SD card. (VIA USB) once done, unplug you'r usb cable. (If u choosed the froyo build, just put the whole android folder to the root of you'r card)
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
Six: Enjoy!
Note: If you'r screen turns black, turn off auto backlight. If it's still black, change radio. AND!!! This dont kills you'r winmo.
I'm non genius but i made this to help you guys.
Please correct me if i am wrong.
Cheers!

Hi,
Thanks for the info but I have done all that without the radio update. I'm running a stock vodafone ROM. I manage to get the haret launched and all the code scrolling but then the screen just fades to black and doen't finish the boot up... Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Cheers!

FreddernLFC said:
Third: Clear you'r SD card (i did, dont know if it's recomended)
Click to expand...
Click to collapse
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
chazzerchops said:
Is it the lack of the radio update doing this?? I'm not very clued in on this stuff.
Click to expand...
Click to collapse
Yes, most likely. What you're reporting sounds like what other people had before they installed a compatible radio.

Just want to add:
1. depends on the build, you have to extract the content to SD based on the instruction. (for example, the Froyo build you have to extract all files to a folder named "android" at the root of SD)
2. Must disable the auto backlight in the WM first, else you will some times get the "black screen". If you look carefully or under strong light, you'll still see things on screen, there is just no back light.
2. Run clrcad before Haret to get the sound working.

Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?

chazzerchops said:
Cheers Meptik
I am looking to update the radio version... it that like doing the full ROM thing, in that it will re-set everything to factory default? Or is the radio update not as 'back to square one' on the phone as doing the ROM?
Click to expand...
Click to collapse
Updating only the radio shouldn't reset your HD2 to factory default, unless perhaps if you flash it using a stock ROM Update Utility.
Use the radio that FreddernLFC links to from the first post; it includes a CustomRUU, which should flash the radio to your HD2 without restoring it to factory defaults.

Hmmm.. will have another look at it. Ran through the updater and 5mins into it it errored so had to go through the recover process. I'll try again later. Cheers

meptik said:
No need to clear your SD card (I never did). It does make it easier to switch between builds, though, since you can just delete everything and copy over the next one you want to try.
Click to expand...
Click to collapse
Mine didn't work with stuff on my 8Gb card so I copied the whole card to my PC, reformatted the card, copied over the Android stuff and it then worked. I the copied all the back up stuff back and Android stopped working (tty error).

green screen
what do i do if i get a green screen...i ran haret..now i see a green screen

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
Take out the battery and start up again, I've got many green screens, but after some tryes it went perfect

psn1819 said:
what do i do if i get a green screen...i ran haret..now i see a green screen
Click to expand...
Click to collapse
You try again. Common issue.

Hi Everyone, just wanted to add a few things. i would recommend you turn off sense from the device, then power off the device, once it powers on again go straight to your file explorer and run the process. you should notice the cursor at the bottom blink at a slower pace, if its in hyper mode the system will crash. it has been helping me, hopes this helps to all

what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio

FreddernLFC said:
...
Five: Disable the auto backlight in the WM first before you start android, Select file explorer on you'r HD2 (or simular programs) And go into you'r SD card Run clrcad (for the sound, If nothing happends, dont worry, dont supposed to) and run Haret. Then after the build has booted, plug you'r USB cable in you'r HD2 again (Android drains battery atm).
...
Click to expand...
Click to collapse
how fast android drains battery ?

sev15 said:
what is this hyper mode what causes it i had to down gade my radio to 2.10.50.26 to get rid of the super fast un usableness of the 2.12.50.xx but i did like my 2.12.50.xx radio wish there was a way to make it work with that radio
Click to expand...
Click to collapse
i assume u can carry on 2.12.50.xx ? dont need to downgrade .. as long as its a .50 radio it shld be fine and pretty new shld be alright .. am i right guys ?

i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !

pool7979 said:
i jus downloaded the desirrev4 build. so i just have to extract all files into the root storage card ? then run clrcad before haret and thats it ?
may i check , does this kills my existing wm rom ? how to switch back to my original wm ? i have read this is a kind of multi boot method . apologies for noob questions .. would appreciate if someone can advice. thanks !
Click to expand...
Click to collapse
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck

How long does it spend? Because I am waiting for a long time.

thihaz said:
winmo still remains there but sometimes you might need to hard reset
just switch off the phone in android or take out the battery and reboot, you are on win mo again.
good luck
Click to expand...
Click to collapse
thanks man !!! cool .. i have just installed android .. but i choose the sense interface. i noticed our hard buttons are not suppose to work right ? and do we have to run clrd and haret everytime we wanna start android ?
on regards to installations of android software, they will be on storage card ?
for the bro above, my running of andoid was fast .. i think less than 5 mins .. after haret, i see many words scrolling .. very fast .. then the next moment , it loads into android and will ask u what interface u want .

vdesire v5 out

[Q] i need help having some error

i downloaded radio 2.12.50 and downloaded hspl3 and miri_steve0007_elegancia_v3.0_final rom. my rom is 2.13.531.1. i put the android file in my sd card and when i click on CLRCAD or haret it say the file CLRCAD cannot be opened.Either it is not signed with a trusted certificate, or one of its conponents cannot be found. if the problem persists, try reinstalling or restoring this file. i reinstall it 5 time and still having the same problem i dont know what i did wrong follow all the instruction and have no luck if someone can help me out please

You could try flashing a different ROM, one which is known to be compatible with Android. Try this one http://forum.xda-developers.com/showthread.php?t=734238
If you don't like it, or it still doesn't work, you can flash back.

nobnut said:
You could try flashing a different ROM, one which is known to be compatible with Android. Try this one http://forum.xda-developers.com/showthread.php?t=734238
If you don't like it, or it still doesn't work, you can flash back.
Click to expand...
Click to collapse
Elegancia is known to work with Android/Linux
To the OP: You should provide more information as to what build you're trying to use, where exactly you put what files (in what folders etc.)...

tsrzealot said:
Elegancia is known to work with Android/Linux
To the OP: You should provide more information as to what build you're trying to use, where exactly you put what files (in what folders etc.)...
Click to expand...
Click to collapse
You are correct, it does... but I suffered from the robot voice and other gremlins when I used it

nobnut said:
You are correct, it does... but I suffered from the robot voice and other gremlins when I used it
Click to expand...
Click to collapse
That's strange, because I don't... maybe a combination of radio/rom thing...
OP: Just to make sure, you said you "downloaded" HSPL, the radio and the rom, but did you also flash them onto your device? Just checking Maybe your download was corrupted and you simply need to download the build again??

yea i flash the radio and the rom i reinstall it again and it said that i finish the download to my phone but still having the same problem i also try to download shubcraft and stilll having the same issue. Is there any way i could deleted all the files and then reinstall it again

for the rom and the radio i plug my usb to my comp and click on the file once it open i click next next and it download it to my phone. for the android file i put it on my sd card

xjohn_nguyenx said:
for the rom and the radio i plug my usb to my comp and click on the file once it open i click next next and it download it to my phone. for the android file i put it on my sd card
Click to expand...
Click to collapse
I don't know if this is a problem of language You have to put the entire "Android" folder on your sd card (which you should format before, just to make sure). There is no single file for Android, but I'm guessing you simply used the wrong term here.
For example, for shubcraft, place the folder named "Android" in the "root" (I don't know if that term fits here) of your sd card and then run clrcad and haret...
If you already did all of that, you might want to try installing "sdkcert" (just search for it in the forum or on google), that might take care of the certificate not being signed/trusted... even though I don't get how that can be a problem if you're already using elegancia rom

yea i zip the file and i drag the whole file into my sd card and its still having the same problem

[Q] [problem] Android wont install

hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,

clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?

bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time

hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.

what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss

frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone

abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.

Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App

malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,

what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.

frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148

I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta

abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort

Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504

There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787

[q]android to wm again?

hi i know is possible to put android on hd2 from windows mobile ... but i wont to ask after is it possible to put again windows mobile ?

marinos2000 said:
hi i know is possible to put android on hd2 from windows mobile ... but i wont to ask after is it possible to put again windows mobile ?
Click to expand...
Click to collapse
HI,
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there

so is possible , thanks
one more question if i install a sd android ver after can i delete android from my sd?

marinos2000 said:
so is possible , thanks
one more question if i install a sd android ver after can i delete android from my sd?
Click to expand...
Click to collapse
Hi
Sd Android runs from the sd card using the HD2 hardware.
Yes you can delete sd android when you have finished with it.

thank you again very very much . eg if i download this http://forum.xda-developers.com/showthread.php?t=957652 ( i read is the best right ?) after can i just delete it ? with this i can download and install all android apps ? and also is already root it or i need to do it ?

marinos2000 said:
thank you again very very much . eg if i download this http://forum.xda-developers.com/showthread.php?t=957652 ( i read is the best right ?) after can i just delete it ? with this i can download and install all android apps ? and also is already root it or i need to do it ?
Click to expand...
Click to collapse
Hi,
I've never run a sd android,so I cannot comment.
The americandroid is a favorite and yes you can install apps ,etc.
When you have finished with it,just delete it.
Read the [OP] carefully.

marinos2000 said:
thank you again very very much . eg if i download this http://forum.xda-developers.com/showthread.php?t=957652 ( i read is the best right ?) after can i just delete it ? with this i can download and install all android apps ? and also is already root it or i need to do it ?
Click to expand...
Click to collapse
There is no best, it is all a matter of personal taste. Asking for the best is more likely to get you flamed. It is an SD Android, try it, erase it, try another. Repeat until you get one you prefer.
All the SD Androids I've run on the HD2 were rooted.
When it is running Android, it is a fully working Android phone. Before you try the Market get a gmail account (just set one up on the computer) and sign in to the Gmail App, then go to the Market. So any apps you download from the market will work, provided that they would work on a similar Android phone. I've downloaded some games and they either didn't work or the graphics were so poor, but in general the vast amount of downloaded apps I've used worked fine.