hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
bravo261 said:
clrcad is an executable that won't actually launch anything, you just run it and then move on to haret.
you reformatted the card and searched, so that's good, but starting a thread definitely isn't the right way. ask in the Q&A or in a relevant thread would keep the place clutter-free.
anyways, you have the Android folder on the root of the sd card? the instructions for each build will be clearer, but most follow this rule. have you also tried another sd card, just in case?
Click to expand...
Click to collapse
yes i have the android folder on the root of my card,
yes i tried an other card
yes i do follow instructions all the time
hopefully someone else will reply then. i'm also using an energy rom, and i just hit clrcad and then haret and i end up booting into android after the initial setup time.
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
frostmore said:
what is your radio version?
some radio version dun work with android. my radio was x.xx.51.xx and droid won't install.
flashed to x.xx.50.xx_x and droid loaded like a charm.
btw,i also loaded energy rom,then did the things you did.only found out that my radio was the problem.flashed that and now on mdj's droid clean...
the only thing now is droid on nand...then its blissssssssssssssssssssss
Click to expand...
Click to collapse
i also have .50 for the rado version and i tried many ROMs but no luck, i also reflashed my phone
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Check you RAM in WM. If it's 320mb, you can't run Android for now...
Sent from my Desire HD using XDA App
malaeus said:
have you tried doing a task29? if you have one of the SD card adapters for the microSD you can plug it direct into your computer and use windows to do the FAT32 format (not just FAT, make sure its FAT32) and reflash your preferred radio and rom combo for winmo. then drop on a fresh copy of android and run it. (i recommend redownloading your favorite build as well)
also......
why did you post the new thread here in development? thats breaking one of the biggest forum rules you say you always follow..... sad.
Click to expand...
Click to collapse
all done but still the same problem, task29, update radio, update ROM, flash,
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
frostmore said:
what is the model of your fone?
this should have been the first question i should have asked.
i know i assumed you have a htc leo since you posted here but i just want to make sure.
and give us details.as much as you can.
Click to expand...
Click to collapse
- htc leo 576 MB RAM size
- Manila version 2.5.20181527.0
- radio 2.08.50.05
- Rom thedarkone (dexter)
- Model # HTC HD2 T8585
- OS 5.2.23148
I am running my HD2 on the stock ROM: RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe with SPL 3.03 (Stock, not HSPL). I read carefully instructions, and followed all steps, I am not going to describe them, used following Android build [30.11.2010] MDJ FroYo HD v. 4.0 [Kernel: MDJ S7.3HD].
After Haret.exe HD2 reseted, and there was only white screen with HTC logo quite a while. I soft reseted the phone, and after that reset almost all programs are unable to start, with following message: "The file ‘cecmd’cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found". It does not mean where are they installed, SD card or Phone storage. But not all of them, e.g. Opera 10 still runs. It also refuses to install new programs, installation process immediately ends, with "Installation was unsuccessful" ((
I digged the forum, and somewhere it was proposed to change registry value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1
But I can not do so: I can not run the registry editor, which I have on my HD2 (Total Commander), I can not install new, or install a tweak, and also when trying to edit registry from my PC through activesync connection with CE Registry Editor and Mobile registry editor it returns with error "access denied".
I do not want to make hard reset. I think there should be a solution, other than HR or flashing new cooked ROM.
Thank you in advance.
Uta
abdostar said:
hello,
I have a problem with Android installation, the 1st things is CLRCAD wont launch, and when i start Haret, it shows the black screen (which is normal) then it take a while and finaly just reboot the phone into Windows OS,
to make it clear,
I searched the forum before posting
I tried many android version, and it's all the time the same problem,
I was using android on my phone before
I formated the SDcard
My phone is flashed, and I'm using Enery ROM
if any solution, please help,
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Hi - I think your response here may have answered my thread as well The end of this dream..
http://forum.xda-developers.com/showthread.php?t=859504
There one thing you can do to run Android on your HD2. yes, I have an HD2 too and currently T-Mobile. 8 month experience with it.
I noticed your Radio is 2.08. There is a latest version which is 2.15.50.14. If you flash your radio, it might going to work. Try it though.
Since you already got HardSPL, you are good to flash radio. Get the 2.15.50.14 in the link: http://forum.xda-developers.com/showthread.php?t=611787
Related
Hi..
Tried the latest Android Froyo build on my phone with some interesting results.
I downloaded Froyo, copied the Android folder to my SD card, hit CLRCAD and then Haret. Froyo started booting, but after 4-5 lines all stopped. There was nothing happening after 15-20 min, so i pulled the battery, and started the phone again.
Now i get the message (in Norwegian)
"The file <filename> cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
The problem is that none of the programs installed on the SD-card runs. They all get the above error.
I can not install any programs (reg editors) because i again get the above message. My registry editor that is already installed wont work, and i can not install anything.
I have tried Googling the problem and i've also searched the forums here in XDA. But i have not found anything that actually might work, because they all wants to install something. I can not install anything, and all of my 3'rd party apps doesn't work.
How do i disable the certificate verification without having to install anything or run any 3'rd part apps??
Is there maybe any program that i can run from my Win7 computer??
Thanks for all informing answers..
Certificate problem?
Exactly the same thing happens to me. Bump!
I'm also having this problem, seems to affect .exe files regardless of whether they are on the SD Card or on the device itself. Same cause as well.
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Stock Rom
juicecultus said:
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Hmm, yeah, it's a stock ROM (for now). I cant't install anything so the certinstaller can't help me.... Now i have to find out how to run a custom ROM.
I have also reformatted the SD-cart with no luck.
My (for now) stock phone:
Manila: 2.5.19211619.0
ROM: 1.66.409.1 (76641) NOR
Radio: 2.06.51.07
Using a custom ROM as a base for Android will heed much better results.
Full instructions for flashing a custom ROM are found here (and here for TMOUS HD2).
^^^ Also I notice you have an old radio (2.06). I'm quite sure you need a 2.10 or 2.12 radio for Android...most people seem to have had the best results from 2.12. You will learn how to do that in the link above I just gave you.
As well, there are programs that allow you to edit the registry while connected via activesync that don't require installing anything on the phone.
Case closed
Well, it seemed like a good time to reset the phone now...
While having this problem, i upgraded the SPL with no problem.
Downloaded the newest Dutty-rom, and tried to upgrade, but because no 3'rd part progs will run, this didn't work. I had to hard reset the phone, and then upgrade the ROM and then the Radio.
Everything seems OK so far...
Thanks for all replies
any luck? i m having the same problem
When I try to open the downloaded android files on my SD card by tapping first CLRCAD and then HARET I get the following eror message: Files can not be opened due to a not signed trusted certificate or one of its componenets can not be found. Please help I'm getting desperate. Have tried reinstalling everything several times. I have radio ROM version 2.06., maybe that is the reason? Thank you.
You have to allow unsigned apps to perform actions/install in WM
something to do with sdkcerts.cab in windows mobile... dont remember exactly.
Wait for sometime... someone will help you.
jazine said:
When I try to open the downloaded android files on my SD card by tapping first CLRCAD and then HARET I get the following eror message: Files can not be opened due to a not signed trusted certificate or one of its componenets can not be found. Please help I'm getting desperate. Have tried reinstalling everything several times. I have radio ROM version 2.06., maybe that is the reason? Thank you.
Click to expand...
Click to collapse
You answered your own question. New radio is called for I think.
are you running stock if so you need hardspl3 after that you need a custom rom , look for chunkyrom for android it works well , then look in to flashing a radio rom , search and you shall find
oh... forgot Welcome to XDA
Yes, first try changing your Radio to 2.12.50.02_2 (Hope u have hardSPL'ed ur phone)
Looks like you have problems due to ur smartphone not accepting unsigned apps....install sdkcert.cab (search forum) for WinMo
well this problem suddenly started occurring
i've been running android builds for months now and not once have I encountered problems running haret and CLRCAD.
but it suddenly happened yesterday when i tried to run Mdeejay froyo revolution 1.5 for the 2nd time (the first time was successful)
and it started giving me the same error message
radio: 2.15.50.14
Hi all, I faced the same issue above, sudden happen.... Im using Rom 2.15
wow are you guys all noobs?
just download bsb tweaks and enable unknown programs.
its called "Policies" something.. youll find it there.
(btw if you are connected to pc with your phone, disconnect it =\ then try)
Hello all, i dont post often but i have a question...
I have the HTC Leo HD2 512MB Flash Version.
It has a genuine Official WM6.5 Version / Build Installed...
Can i use any of the SD android versions with it? It is running with radio 2.07.51.22_2
How would i get a SD version of android (that boots from WM) to work...
Do i need to install a un official rom for it to work???
the problem is, i start the CLRCAD then i run haret.exe but then it starts with the code lines... it says somthing in green, followed by 1000's of white lines of code then it freezes, the screen looses power, and the linux icon / code screen never appears - the green light flashes and the screen powers down with two virtical lines on the left that eventually fade. I have to soft reset it but this happens with EVERY SD android i try...
Please Help
There are stickies that you should read if you have to ask this question. Spend the time now. Just warning you.
Your rom should be fine but the radio is not. That is your problem. You need a x.xx.50.xx series radio. It needs to be at least 2.8.50. For that you need HSPL.
Start with this thread.
http://forum.xda-developers.com/showthread.php?t=732380
Sorry its abit late but thanks
Agoattamer said:
There are stickies that you should read if you have to ask this question. Spend the time now. Just warning you.
Your rom should be fine but the radio is not. That is your problem. You need a x.xx.50.xx series radio. It needs to be at least 2.8.50. For that you need HSPL.
Start with this thread.
http://forum.xda-developers.com/showthread.php?t=732380
Click to expand...
Click to collapse
Thanks - i used a NAND version in the end -
I know about the 'stickies' rule thing BUT some threads are rubish - no offense - like having a load of rabble about a rom then no propper link or instruction to the required files...
Also the amount of forumposts scares me off sometimes - so much choice...
--------------------------------------------------------------------------------
i have just bought the htc hd2 and want it to run andriod but i dont know which one to download or even where to download from.
i have spend many hours reading and still no closer to what i need is it gingerbread 2.3 , froyo which is the best one to use and help getting the right u.k radio
what software and radio should my phone be??/
i have took a look at the guide on here and dont have a clue where to start as im not to good stuff like this and dont want to brick my phone.
is there a video guide around someone could send me a link to
any help would be great sorry for the silly questions
i know my way around a pc and im willing to have ago.
wolfie1981 said:
i have just bought the htc hd2 and want it to run andriod but i dont know which one to download or even where to download from.
i have spend many hours reading and still no closer to what i need is it gingerbread 2.3 , froyo which is the best one to use and help getting the right u.k radio
what software and radio should my phone be??/
i have took a look at the guide on here and dont have a clue where to start as im not to good stuff like this and dont want to brick my phone.
is there a video guide around someone could send me a link to
any help would be great sorry for the silly questions
i know my way around a pc and im willing to have ago.
Click to expand...
Click to collapse
first check the SD builds forum - easier as no flashing required, then pick one (e.g. ACA my personal favorite), read the installation instructions (usually just create Android folder on your SD card, then copy the build there), then run using any file manager clrcad.exe and haret.exe which are the android folder, wait for 10-30 minutes until 1st boot is finished, and done
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
wolfie1981 said:
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
Click to expand...
Click to collapse
links are marked by brownish font by default, check my previous post,
as for SPL, HSPL etc., you don't need to bother as long as you run Android from SD, that's the beauty of SD builds, enjoy full functionality of android, without the hassle and risk of bricking your device
some general FAQs here and here, but if you want to start fast, you can read those later, installing an SD build is safe
wolfie1981 said:
hi thanks for that do you have direct links on these you could put up
ive been reading about the SPL
MINE IS SPL -3.03.0000 will i need to downgrade???
Click to expand...
Click to collapse
That SPL and radio version are fine, just download the ROM, extract it, click on CLRCD, then HARET, then you're running Android.
And ACA is by far the best ROM you're going to find
i cant find the links for what i need to download
can someone post direct links for the rom i need please
this is my phone info..
os version
5.2.21913 (21913.5.0.94
manila version
2.520181527.0
rom version
3.14.405.2 (04666)WWE
ROM DATE 09/29/10
radio 2.15.50.14
protocol version 15.42.50.11u
many thaks to you all for the help
wolfie1981 said:
i cant find the links for what i need to download
can someone post direct links for the rom i need please
many thaks to you all for the help
Click to expand...
Click to collapse
d/l ACA from here: http://forum.xda-developers.com/showthread.php?t=957652, post #1, section "Downloads, once you have the file "AmeriCanAndroid 072511(sd).7z" unpack it, and copy the folder Android to the root of your SD Card, then run clrcad, then haret, then ... enjoy
just ran clrcad, then haret, and its sat on a gray screen thats say american andriod been like this for 10mins any clue's on what its doing???
wolfie1981 said:
just ran clrcad, then haret, and its sat on a gray screen thats say american andriod been like this for 10mins any clue's on what its doing???
Click to expand...
Click to collapse
first boot can take up to 20-30 minutes, as the data file (default = 2GB) is created, if nothing happens after that time, remove the battery (fastest way of resetting the device) and try again
p107r0 said:
first boot can take up to 20-30 minutes, as the data file (default = 2GB) is created, if nothing happens after that time, remove the battery (fastest way of resetting the device) and try again
Click to expand...
Click to collapse
I thought it was a 1gb default
orangekid said:
I thought it was a 1gb default
Click to expand...
Click to collapse
you're right
p107r0 said:
you're right
Click to expand...
Click to collapse
lol no need for 2, I use 1gb and lots of big apps and still have 400 free.
but yeah, ACA is the best ROM for your money, even better than any NAND rom I've used
got it working well happy!!! is there anythink i need to after its up and running??
also if i power will i have to reinstall
thank you to everyone that helped
got it working thank you all for the help
is there anythink i need to do once up and running???
can i install apps to my sd card and not the phone as i have a 16gb card
wolfie1981 said:
got it working well happy!!! is there anythink i need to after its up and running??
also if i power will i have to reinstall
Click to expand...
Click to collapse
what's more to know for the start?
- no need to reinstall from now on, it's just that for now your device will always restart to WinMo, however: find yourself so called "android loader" to automate android loading, there's few of those to choose from, e.g. Android Loader v6.0
- connect android with your google account so your contacts and emails are synced (Settings / Accounts etc...)
- install Battery Monitor Widget, so you always know how much mA your device uses and how much battery is left,
- also search xda for tips on conserving battery power (e.g. disable 3G if not needed, switch off GPS, tweak backlight autobrightness in CM Settings etc.)
- be aware that for now the USB file transfer does not work, to copy files to your HD2 use WinMo or Card Reader or File Expert
- backup often: 1. invest in Titanium Backup, 2. from time to time copy data.img to your PC
- browse through the ACA FAQ and thread (I know it may be hard to read all 14995 messages at once)
wolfie1981 said:
can i install apps to my sd card and not the phone as i have a 16gb card
Click to expand...
Click to collapse
All apps are installed on your card, the whole idea of an SD build is that WinMo still sits in ROM, while Android basically consists of two files (sitting in the SD\Android folder) which are mounted at the start: system.ext2 (all system files and apps) and data.img (all user apps and settings). From user point of view you won't notice the difference. Additionally, once you run out of space in your data.img, you can always resize it, there are tools for that, but lets put it aside for now
do you have a link for the andriod bootloader??/
is it easy to install
many thanks
wolfie1981 said:
do you have a link for the andriod bootloader??/
is it easy to install
Click to expand...
Click to collapse
all links are in my previous post, click on the brown text "Android Loader v6.0" to open,
installation is standard for WinMo: while in Windows Mobile, copy the .cab file to your SD Card and run from within any file manager, then it will guide you, also when in doubt search its thread for more info
i have downloaded it there is no cab file when i extract it from the zip folder.
wolfie1981 said:
i have downloaded it there is no cab file when i extract it from the zip folder.
Click to expand...
Click to collapse
you have this file: File Type: mskip_Android_Loader_V6.0 Final.cab? that's the one, do not try to unpack it on your PC, just copy to SD Card and then run from there
the rar file dont show on the sd card??
do i have to be in winmo for this
hy guys,
I am a noobie in instaling W7 on hd2
How stable is the W7 ROM now and how easy is to install it?
some links will be perfect
I saw there are 2 difrent ways to install w7. wich one is the best?
i am reading xda forum for the last 5 hours and i cant find a start point.
Please help!
Sorry if this post is in the worng section!!!!!!!!!
my hd2 detailes are:
- radio version 2.15.50.14
- manila version: 2.5.20181527.0
- G 15.42.50.11U
- D 3.14.04666
on the collored screen: PB81100 HX-BC
SPL- 2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
It was installed a w7.5 on my hd2, so I know that it works and it works perfect!
Much apreciate your help!
Thank you!
Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess
kid1988 said:
Rom here
http://forum.xda-developers.com/showthread.php?t=1356833
Other rom here
http://forum.xda-developers.com/showthread.php?t=953078
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
That's the easiest way. Remember that you'll louse EVERYTHING personal on your phone...
Also, there is a third rom ATM, but it requires more work to get to the latest version. Although it allows for more flexible features and updating..
Couldn't be more clear I guess
Click to expand...
Click to collapse
FANTASTIC!!!
Thank you!!!!!!!
I will start flashing right now!
not workink!
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks
cosmin_f said:
manneged to install leo70, os version 7.0.7004.0 and I think is not a very good ROM.
it works without a sdcard. why?
i did a hardspl. whats the next step?
how can I go back to windows6.5 original?
anny ideeas?
thanks
Click to expand...
Click to collapse
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.
ayopancheezy said:
Try installing a better rom such as YukiXBMod, PDA's, or HD2O at 8107. I've been using WP7 and it has been by far the best OS I've ever used.
The speed of the phone also depends on your SD card. If it's sluggish, more than likely, your card isn't compatible.
Click to expand...
Click to collapse
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you
cosmin_f said:
can I have the exact links? please
do I need to uninstall this w7 that is running now? how?
I tried from htc's website this ROM Update for HTC HD2 (3.14.405.2), but I get the 260 error.
I tried to go with 23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5 but I cant extract the files. I get an error.
please help!
thank you
Click to expand...
Click to collapse
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?
cosmin_f said:
manneged to go back to windows 6.5 BUT I do have a very big problem:
MY SDCARD SHOWS ONLY 200MB! IT IS A 4GB ONE AND A BRAND NEW ONE!
why?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.
ayopancheezy said:
http://forum.xda-developers.com/forumdisplay.php?f=977
all the roms available are in that thread. i'm using HD2O and it's fantastic. I'm not going back to Android. everything runs much smoother and i use my phone more rather trying to customize it like on the android.
and your SD card says only 200mb available because when you flashed WP7, it locked your SD card. there are only a few ways to unlock it.
i suggest you reflash WP7 again. It's a great OS.
Click to expand...
Click to collapse
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!
cosmin_f said:
Tried
23.Langs+HD2+Pdaimatejam+Rom+Wp7.5+mango+7.10.8107.79+v6.5
and
HD2 Pdaimatejam Rom Wp7.5 mango 7740 v1
but i got this errors
WTF its going on?????????
I will leave this hd2 to rust and I will stick wiyh my desire hd!
Click to expand...
Click to collapse
you simply not read instructions (tutorial) how to install this ROM.... you already ask this question under ROM topic....
You are flashing the rom incorrectly.
Under the rom thread you wish to flash, please read the instructions first. All the Rom creators usually edit their thread to make sure the instructions are included. The instructions are also included in the DWI.exe file. You are just not reading it.
1. Turn off the phone completely.
2. Turn it back on and hold the shut down button until you reach the MAGLDR screen.
3. Press the green button on "USB Flash"
4. On your screen, it will load and say USB Flash ready!
5. Unrar the files and place them somewhere like your desktop.
6. Open "DWI.exe" and make sure you Ran it as ADMINISTRATOR.
7. Read everything or simply skim through it.
8. Keep clicking Next and watch everything finish on both your computer and phone screen.
9. Wait for it to boot up. It usually takes around 5-10 minutes.
kid1988 said:
Rom
Guide here
http://forum.xda-developers.com/showpost.php?p=21010262&postcount=1217
Couldn't be more clear I guess
Click to expand...
Click to collapse
Excellent and thanks very much. Too much head spinning information on sticky and almost gave up. Following linked guide took me less than 1hr and that including some partition errors + sd card not recognised msg on first try. Missed the part :
2.GO to services and activate the last 24mb of RAM
3.Also in services do format MBR
Now need activation. Just a quick one: can I change the sim(number) after received the code? Or the code is only valid for given phone number to MS chat agent?
cheers.
dont worry give your original number...code is valid only for the live account...
Actually, Activation works
Tried on different phones, different rom, different SN (all HD2 though) different sims (also no sim) and different live account. Activation just always works.
Code is for a live account.. But you can use it on another account after 30days if the earlier account stays unused / withdrawn.... So you can use it on different phones, and and yes on different accounts too.. The problem comes when you want to install the same app you have on one phone-live account from marketplace...again on another phone with same account.... It says already installed
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
Google or bing for it =)