hello my Xoom does not start, stays in the animation and goes from there. cr4 recovery 3.2.0.0 download and flash it, flash the room after Tiamat 2.1 Hamme ... kernel and after overclocked d Tiamat and then reboot and gave him started.
Please Help me
Sorry for my english i use google translate
I can enter to recovery 3.2.0.0 what can i do?
fheer1 said:
I can enter to recovery 3.2.0.0 what can i do?
Click to expand...
Click to collapse
You said that you flashed the Hammerhead rom, and that you overclocked. Did you check the box "set on boot" in SetCPU because your Xoom might not do well at the oc setting.
You may need to do a wipe data/factory reset in recovery and then reboot.
I'm sorry if this is not the problem...please give more information.
Hi. thanks for help.
i flash the tiamat hammerhead 2.1 room in recovery mode and after flash the kernet Tiamat (also in recovery) but the problem I think was in the folder where I had the room I also had a bootanimations.
fheer1 said:
Hi. thanks for help.
i flash the tiamat hammerhead 2.1 room in recovery mode and after flash the kernet Tiamat (also in recovery) but the problem I think was in the folder where I had the room I also had a bootanimations.
Click to expand...
Click to collapse
Just having a bootanimation zip in the same folder shouldn't be a problem. Did you do a wipe data/factory reset when you flashed the zhammerhead rom. You need to do that when you change roms.
Yes i wipe data+cache+dalvik and after flash room and kernel and reboot but no star only bootanimation and no more
fheer1 said:
Yes i wipe data+cache+dalvik and after flash room and kernel and reboot but no star only bootanimation and no more
Click to expand...
Click to collapse
Did you try to download the zip file again and/or reflash the rom? Sometimes it's simple as that.
im delete all files fro micro sd card and only have the room and flash and work, thank u very much. im very happy, jejejeje. thank u very very much
One question, is normal in the tiamat room in the reboot a litle image distorsion before the animation? thanks again and regards
fheer1 said:
im delete all files fro micro sd card and only have the room and flash and work, thank u very much. im very happy, jejejeje. thank u very very much
One question, is normal in the tiamat room in the reboot a litle image distorsion before the animation? thanks again and regards
Click to expand...
Click to collapse
Yes, this is because the Tiamat rom includes some improvements from Nvidia, and it just causes a little graphic glitch. Nothing to worry about.
thank u very much for ur help.
fheer1 said:
thank u very much for ur help.
Click to expand...
Click to collapse
I'm happy you solved your problem!
Related
Ok, so I inatalled lite'ning v6.1 and it root my phone 2.
Now I want to move to MIUI Galnet 1.9.9 for SGS2.
can i ignore the part when i need to root my device and install the rom over the lite'ning rom?
and if not, how should i do that?
tnks ;]
Perperz said:
Ok, so I inatalled lite'ning v6.1 and it root my phone 2.
Now I want to move to MIUI Galnet 1.9.9 for SGS2.
can i ignore the part when i need to root my device and install the rom over the lite'ning rom?
and if not, how should i do that?
tnks ;]
Click to expand...
Click to collapse
Probably but you need to read the instructions for the rom you install .
jje
if you have root then you most probably have cwm recovery. go there and just flash the galnet over litening
Yep just make sure you factory reset, wipe data/cache etc (note, make sure to back up apps, SMS etc, as they will be wiped)
you will need to format /system, and preferably /sdcard also. This is not optional.
fyre31 said:
if you have root then you most probably have cwm recovery. go there and just flash the galnet over litening
Click to expand...
Click to collapse
OK, I searched a little bit in the web and i found up that the lite'ning comes with a cwm, root, and build recovery mode. so all i got to do is to wipe and instal.
thanks for your help guys ; ]
Perperz said:
i don't know if i have cwm.
does it matters if i'll install it again?
so what you are saying is to skip the part of the root and install the rom over lite'ning yes?
Click to expand...
Click to collapse
yep. just turn off your phone and press volume up+home+power buttons to boot into cwm recovery. from there you can wipe /data, format /system then flash galnet miui update .zip
you don't have to install cwm afaik litening has it already
MIUI ROM installed sucssesfuly
m2smoe said:
you will need to format /system, and preferably /sdcard also. This is not optional.
Click to expand...
Click to collapse
Where did you get the kernal?
Hi!
I would like to place this kernel: Stock/HV/Taboonay V3.7 for HC 3.2 16-10 - 1.64Ghz/UV control on my acer a500...
but I have this ROM: Glass KJY2010 Honeylicious Flash 3.2.1
I can pass it to my tab?
if not, what I gotta do to pass it to my tab?
I'm sorry for my english, i'm from brasil
you install a kernel the same way you install a rom, but without wiping. I dont know if that kernel works with your rom though, make a backup before flashing in cwm just in case.
It will work.
Wipe Cache, and Dalvik Cache
Then select zip from sd.
Should be no issues.
Moscow Desire said:
It will work.
Wipe Cache, and Dalvik Cache
Then select zip from sd.
Should be no issues.
Click to expand...
Click to collapse
Works
Thank You!
The first boot was too long(my heart was thumping, I thought I had bricked )
yuril7 said:
Works
Thank You!
The first boot was too long(my heart was thumping, I thought I had bricked )
Click to expand...
Click to collapse
First boots are always a little long, just like a rom flash. Kernel's are like that.
And you may see a little "flicker" on the "ACER" screen as the cooked kernel loads. Normal. You get used to it.
Enjoy...
Oh... do your backup please
I formatted System, cache and data and now when i boot my S4 is stuck at GT-i9505 boot screen, I can get it in download mode, does anyone have a fix?
Thank you.
WilliamMRees said:
I formatted System, cache and data and now when i boot my S4 is stuck at GT-i9505 boot screen, I can get it in download mode, does anyone have a fix?
Thank you.
Click to expand...
Click to collapse
sure it will stuck, there is no os. flash stock firmware, see my sig.
samersh72 said:
sure it will stuck, there is no os. flash stock firmware, see my sig.
Click to expand...
Click to collapse
Okay, thanks dude, is this the only way? I can get into CWM recovery mode?
WilliamMRees said:
Okay, thanks dude, is this the only way? I can get into CWM recovery mode?
Click to expand...
Click to collapse
flash a custom Rom with recovery if u want
Blackwolf10 said:
flash a custom Rom with recovery if u want
Click to expand...
Click to collapse
I'm kinda new to this, how would I go about that?
Also, I formatted the system, cache and data, I'm assuming this is why this has happened, I was doing that because I was installing Cyanogenmod following this method 'http://forum.xda-developers.com/showthread.php?t=2271595) how would I do that withopuot making the same mistake I made here?
Thanks guys!
WilliamMRees said:
I'm kinda new to this, how would I go about that?
Also, I formatted the system, cache and data, I'm assuming this is why this has happened, I was doing that because I was installing Cyanogenmod following this method 'http://forum.xda-developers.com/showthread.php?t=2271595) how would I do that withopuot making the same mistake I made here?
Thanks guys!
Click to expand...
Click to collapse
you are supposed to flash the Rom after formating those stuff not before
Blackwolf10 said:
you are supposed to flash the Rom after formating those stuff not before
Click to expand...
Click to collapse
I think i followed the steps correctly, I flashed CWM and did a backup, then formatted the stuff, then the phone would not reboot to unzip cyanogen.
WilliamMRees said:
I think i followed the steps correctly, I flashed CWM and did a backup, then formatted the stuff, then the phone would not reboot to unzip cyanogen.
Click to expand...
Click to collapse
you don't need to reboot
you need to flash it right after those formating
and the file needs to stay as a zip to be flashable so what did u mean by unziping it
also after you flash it won't hurt to wipe data/factory reset and also wipe cache
Blackwolf10 said:
you don't need to reboot
you need to flash it right after those formating
and the file needs to stay as a zip to be flashable so what did u mean by unziping it
also after you flash it won't hurt to wipe data/factory reset and also wipe cache
Click to expand...
Click to collapse
Ahhhhhh, silly me, I think I understand now! Thanks for the help dude!
Hey i installed another rom on my sgy, now i would like to restore my original one, I have a backup of IT by cwm, plz give me step by step help to how to restore it using cwm
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
1hewar10rd said:
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
Click to expand...
Click to collapse
But don't i need to do other steps like mount data n wipe dalvik cache etc...
ApexPredator01 said:
But don't i need to do other steps like mount data n wipe dalvik cache etc...
Click to expand...
Click to collapse
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
marcussmith2626 said:
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
Click to expand...
Click to collapse
Are you Damn sure ?
ApexPredator01 said:
Are you Damn sure ?
Click to expand...
Click to collapse
With respect I know what I'm talking about - iv tested nearly every rom here for my statusbar thread - iv backed up & restored my phone too many times to count
Dude !! I always use advance recovery of only system because I always strucked in boot-loop while trying any new thing!!
OKay Thanks Alot Guys
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
ApexPredator01 said:
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
Click to expand...
Click to collapse
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
aniket.lamba said:
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
Click to expand...
Click to collapse
Yess !
I did exactly like these guys told me above :/
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
marcussmith2626 said:
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
Click to expand...
Click to collapse
How to do all that ?? :/
ApexPredator01 said:
How to do all that ?? :/
Click to expand...
Click to collapse
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
marcussmith2626 said:
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
Click to expand...
Click to collapse
Can you plz give me proper steps procedure with download links PLEASEE !
ApexPredator01 said:
Can you plz give me proper steps procedure with download links PLEASEE !
Click to expand...
Click to collapse
Really are you being serious!
Steps already given
To restore cm7 backup
flash percys kernel
reboot recovery
format system data cache
advanced restore
restore system and data only
what links can you possibly need - if you have already flashed cm7 before you know where percy kernel is because you need to be on percys kernel to flash the latest percys cm7 (hint it's on percy's cm7 thread!)
if you hadn't noticed I'm getting fed up of people who want spoon feeding
ApexPredator01 said:
I did exactly like these guys told me above :/
Click to expand...
Click to collapse
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Yes man i want to restore stock Rom only !
And i thought by cm7 he meant clockworkmod not cyanogenmod
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Hey man. Im telling again i made a backup of my stock Rom using Clockworkmod . then i installed hyperion. now i want to go back to stock Rom using that backup. i followed steps you told earlier. it says Error loading boot image. Plz help now i!
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
xddxd said:
So yeah, hey XDA, first post here
I have got a problem with my SGY, whenever i flash a custom kernel via CWM, I get stuck at splash screen. And when i flash stock kernel via Odin, phone boots normally.
Do you guys know what is the problem?
Kernels I have tried:
1.Kuro - loop at splash
2.Hells-fusion - loop at splash
3.Savie - stuck at splash
Any help would be really appreciated.
Click to expand...
Click to collapse
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
marcussmith2626 said:
Most likely you failed to mount system before flashing the zip or your baseband needs updating
Make sure you goto mounts & storage in cwm and mount system before flashing any zip (will display "unmount system" if it is mounted)
To update baseband flash one of the latest stock roms via odin - see my firmware thread - link it signature
Click to expand...
Click to collapse
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
xddxd said:
Thanks for your reply
Yeah I did mount everything in CWM, it's probably the baseband thing. I have the latest firmware file for my region (Baltic States). Will it work?
Here is the version of it:
PDA:XXMI1
MODEM:XXMG1
CSC:SEBLL1
KERNEL:XXMI1
Anyways, gonna make a nandroid backup and try to flash the whole stock firmware.
EDIT:Flashed stock with wipe, rooted, flashed savie - no luck.
Click to expand...
Click to collapse
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
http://d-h.st/u2m
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
marcussmith2626 said:
Yes that's the latest firmware
The only other thing I can think of is that you are using the wrong cwm
Here is my one - Flash it in stock recovery then mount system & flash zip
(Your link, can't post it because of limitation)
Also there are different versions of savie - make sure you are using the stock one if on stock rom and not the cm one
I would use hells fusion #50 myself for testing
Click to expand...
Click to collapse
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
xddxd said:
Downloaded the CWM you provided, mounted everything, flashed hells-fusion, and still got bootloop
Click to expand...
Click to collapse
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
marcussmith2626 said:
I dont know what your problem is - do you have any mount scripts for linking sdext
You can format data and wipe cache & delvik cache & see if it boots
Other than that without seeing your phone I cannot offer anything else
Click to expand...
Click to collapse
Yep, I had link2sd, anyway to delete the script?
xddxd said:
Yep, I had link2sd, anyway to delete the script?
Click to expand...
Click to collapse
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
marcussmith2626 said:
Use aroma file manager - Flash it in cwm with system mounted
Goto system/etc/init.d
Delete everything in there so nothing can conflict
http://forum.xda-developers.com/attachment.php?attachmentid=1408182&d=1350455938
Click to expand...
Click to collapse
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
xddxd said:
It worked, thank you sooo much!! Can I use Link2sd now on kuro?
Click to expand...
Click to collapse
If done correctly than yes
marcussmith2626 said:
If done correctly than yes
Click to expand...
Click to collapse
Oh, and BTW savie still doesn't work xD
xddxd said:
Oh, and BTW savie still doesn't work xD
Click to expand...
Click to collapse
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
marcussmith2626 said:
His kernel is technically banned on XDA due to not being able to provide the sources
All I can say is long as you are the right one - there's one for stock and one for cm7 but I'd just use hells fusion #50
Click to expand...
Click to collapse
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
xddxd said:
Idk why, but Ramexpander says hells-fusion doesn't support swap so I went for kuro.
Click to expand...
Click to collapse
Hells fusion doesn't support swap - I don't think there's much point in it anyway but whatever works best for you