Related
hello my Xoom does not start, stays in the animation and goes from there. cr4 recovery 3.2.0.0 download and flash it, flash the room after Tiamat 2.1 Hamme ... kernel and after overclocked d Tiamat and then reboot and gave him started.
Please Help me
Sorry for my english i use google translate
I can enter to recovery 3.2.0.0 what can i do?
fheer1 said:
I can enter to recovery 3.2.0.0 what can i do?
Click to expand...
Click to collapse
You said that you flashed the Hammerhead rom, and that you overclocked. Did you check the box "set on boot" in SetCPU because your Xoom might not do well at the oc setting.
You may need to do a wipe data/factory reset in recovery and then reboot.
I'm sorry if this is not the problem...please give more information.
Hi. thanks for help.
i flash the tiamat hammerhead 2.1 room in recovery mode and after flash the kernet Tiamat (also in recovery) but the problem I think was in the folder where I had the room I also had a bootanimations.
fheer1 said:
Hi. thanks for help.
i flash the tiamat hammerhead 2.1 room in recovery mode and after flash the kernet Tiamat (also in recovery) but the problem I think was in the folder where I had the room I also had a bootanimations.
Click to expand...
Click to collapse
Just having a bootanimation zip in the same folder shouldn't be a problem. Did you do a wipe data/factory reset when you flashed the zhammerhead rom. You need to do that when you change roms.
Yes i wipe data+cache+dalvik and after flash room and kernel and reboot but no star only bootanimation and no more
fheer1 said:
Yes i wipe data+cache+dalvik and after flash room and kernel and reboot but no star only bootanimation and no more
Click to expand...
Click to collapse
Did you try to download the zip file again and/or reflash the rom? Sometimes it's simple as that.
im delete all files fro micro sd card and only have the room and flash and work, thank u very much. im very happy, jejejeje. thank u very very much
One question, is normal in the tiamat room in the reboot a litle image distorsion before the animation? thanks again and regards
fheer1 said:
im delete all files fro micro sd card and only have the room and flash and work, thank u very much. im very happy, jejejeje. thank u very very much
One question, is normal in the tiamat room in the reboot a litle image distorsion before the animation? thanks again and regards
Click to expand...
Click to collapse
Yes, this is because the Tiamat rom includes some improvements from Nvidia, and it just causes a little graphic glitch. Nothing to worry about.
thank u very much for ur help.
fheer1 said:
thank u very much for ur help.
Click to expand...
Click to collapse
I'm happy you solved your problem!
Hello people, can you help me please?
I can't install ANY custom roms. I have the latest 2.3.5 official rom.
Here's how I'm doing:
- Backup on CWM
- Wipe everything (factory reset, cache, dalvik cache)
- install zip
- reboot system now.
And then, black screen with Huawei red logo appears and starts to bootloop.
It occurs with any custom rom, I can only use the official one.
What's happening? Maybe I've to enable logcat? If yes, how can i do it trough ADB?
Best regards.
Ok, i've enabled logcat and occurs the same.. bootloops...
When i wipe dalvik-cache this message appears:
"E:unknown volume for path [/sd-ext]"
What does it mean?
I've unlocked the bootloader by doing this: http://forum.xda-developers.com/showthread.php?t=1457490
Well, I tried to flash again the custom roms (CM, Oxygen and MIUI) and made all the wipes, and I get stuck again at the Huawei logo...
Someone please help me?
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
PaulMilbank said:
Are you flashing the .35 kernel versions of the roms? Oxygen wont work as it has a .32 kernel. Whether that would cause a bootloop, I dont know.
Click to expand...
Click to collapse
Yes pal, i'm flashing .35 kernels...
Very strange, you know?
http://forum.xda-developers.com/showthread.php?t=1427533 - it is a .35 kernel, isn't it?
Some help, please?
mrasquinho said:
Some help, please?
Click to expand...
Click to collapse
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
uumeshh said:
Why dont you try Clockwork mod 5.5.0.4 to apply custom ROMs..
Click to expand...
Click to collapse
I'm using it
Sent from my Huawei Ideos X5 using xda premium
Moved To Q&A
Please post all questions in the Q&A section
I've got the same problem as you :/ Please post here if you've solved it.
Damn. Still nothing on this from anyone. I've been researching this for ages, and I can't find anything on anyone being able to solve this problem.
Possible solution!
I found a custom ROM that I could install without getting bootloops!
http://forum.xda-developers.com/showthread.php?t=1481168
Just followed the directions and it actually worked this time!
boot to CWM -> factory reset* -> wipe cache partion & wipe dalvik cache -> format system directory* -> install the ROM from sdcard
I'm thinking that maybe the "format system directory" may be what fixed it... I'm really not sure. Never done that with any other ROM installation, so it would seem like this is a solution.
Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas
tpauli said:
Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas
Click to expand...
Click to collapse
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it
Koshu said:
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it
Click to expand...
Click to collapse
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!
Problem solved
tpauli said:
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!
Click to expand...
Click to collapse
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!
tpauli said:
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!
Click to expand...
Click to collapse
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx
florian1985 said:
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx
Click to expand...
Click to collapse
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????
cachlanhuong said:
I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????
Click to expand...
Click to collapse
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE
Ottilooping said:
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE
Click to expand...
Click to collapse
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
tpauli said:
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
Click to expand...
Click to collapse
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?
Ottilooping said:
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?
Click to expand...
Click to collapse
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161
tpauli said:
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161
Click to expand...
Click to collapse
But I have no recovery anymore. The cwm replaced the "normal" recovery.
Ottilooping said:
But I have no recovery anymore. The cwm replaced the "normal" recovery.
Click to expand...
Click to collapse
Send me an photo from your "recovery"...
tpauli said:
Send me an photo from your "recovery"...
Click to expand...
Click to collapse
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?
Ottilooping -
You were running ICS before flashing to CM, right?
da_reeseboy said:
Ottilooping -
You were running ICS before flashing to CM, right?
Click to expand...
Click to collapse
Yes, thats correct.
Ottilooping said:
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?
Click to expand...
Click to collapse
That looks good!
My suggestion: Flash the formatdata.zip and than install the last v0.9.2 from koshu located here: http://forum.xda-developers.com/showthread.php?t=1846044
I was coming from ics too.
Problem solved. CM is running. Thanks for your help, exspecialy to you tpauli.
The formatdata.zip was the key
One last question. I am using the folio keyboard with an european layout (qwertz), but with Cyanogen it is us layout (qwerty). How can I change this?
See Page 4 for details on how I solved it.
In short I upgraded to BL7
OP:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Hey all,
I'm stuck with my Defy (MB525 Red Lens).
I recently flashed an SBF which I then realised had a messed up CG version (too low or high or whatever)... I went to the AIO Defy Beginners guide as I remember seeing something there about this, and this is what I found.
Black Screens when booting up: (!) Tried to install a version of Android with a lower CG Version than the one currently on the phone.
Weird behavior after installing a Fixed SBF: Install a matching Nandroid backup with your SBF, and remember to clear Cache/Dalvik Cache using Recovery.
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
I used the first method.
I have completed these parts (So I'm now on Froyo - the second SBF), however I can't seem to upgrade to Jellybean anymore.
I tried following these instructions to install JB from FroYo again, but once I have it installed I just get a black screen with a red LED. It hangs there, then returns to the red M logo.
I've tried taking the battery out for 5 minutes, and leaving it on that screen, but no luck.
Currently I'm again at the FroYo ROM, which is working for me, but I want my Jellybean back
Can anyone help me please?
You has flashed GB kernel and cannot revert to Froyo. From now one you must use the fixed sbf and flash the nandroid backup. After that you can install CM10.
pgreed I tried installing this, but it didn't work (including the nandroid backup)
Current settings:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Click to expand...
Click to collapse
Aim:
A functional (daily) Jelly Bean ROM!
Click to expand...
Click to collapse
First SBF I think I flashed: JRDNEM_U3_2.21.1_SIGNED_USAJRDNEMARAB1B8TMGB028.0R_USAJORDANTMGB_P030_A012_M001_HWp3_Service1FF.sbf.gz
Please help, anyone!
pk92 said:
Edit 30/1/2013 22:26GMT:
The current rom I am on (The Froyo mentioned below) has the following 'About Phone')
Kernel: [email protected]
Baseband: EPU93_U_00.59.01
BPflex version: UCAJRDNEMARAB1B80AA03A.0R
APflex version: GAS_EMEA_USAJRDNFRYORTCEE_P016
Build number: JOREM_U3_3.4.2_179-2
Hey all,
I'm stuck with my Defy (MB525 Red Lens).
I recently flashed an SBF which I then realised had a messed up CG version (too low or high or whatever)... I went to the AIO Defy Beginners guide as I remember seeing something there about this, and this is what I found.
I used the first method.
I have completed these parts (So I'm now on Froyo - the second SBF), however I can't seem to upgrade to Jellybean anymore.
I tried following these instructions to install JB from FroYo again, but once I have it installed I just get a black screen with a red LED. It hangs there, then returns to the red M logo.
I've tried taking the battery out for 5 minutes, and leaving it on that screen, but no luck.
Currently I'm again at the FroYo ROM, which is working for me, but I want my Jellybean back
Can anyone help me please?
Click to expand...
Click to collapse
Under method 2, there is info on how to install CM7. Use it to flash CM10.
Vicsa said:
Under method 2, there is info on how to install CM7. Use it to flash CM10.
Click to expand...
Click to collapse
Thanks for the reply.
"8. Flash this Fixed SBF"
What Fixed SBF (for CM10) should I use in place of this step?
Will "cm10Quarx.31.12+BM.tweaks.fixed.sbf" from this thread work?
pk92 said:
Thanks for the reply.
"8. Flash this Fixed SBF"
What Fixed SBF (for CM10) should I use in place of this step?
Will "cm10Quarx.31.12+BM.tweaks.fixed.sbf" from this thread work?
Click to expand...
Click to collapse
you misunderstood me. Don't use method 2, but info under that method on how to install CM7.
Vicsa said:
you misunderstood me. Don't use method 2, but info under that method on how to install CM7.
Click to expand...
Click to collapse
Ahh, so you meant
Root your Defy (Using SuperOneClick 1.7 and not 1.9).
Install SystemRecovery from GoAPK. If you install 2nd init, you'll just get into a boot loop and have to start over.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM7 .Zip and then gapps zip file. DO NOT wipe again, you'll just go back to 2.2.2 CEE (if you accidentally do this, you can pick up again from step 3).
profit!
Click to expand...
Click to collapse
Alright, I'll see how that goes Thank you very much
Edit: The SystemRecovery from GoAPK link says it's outdated :S http://forum.xda-developers.com/showthread.php?t=875233
Will try EasyRecovery instead http://forum.xda-developers.com/showthread.php?t=1787541
pk92 said:
Ahh, so you meant
Alright, I'll see how that goes Thank you very much
Edit: The SystemRecovery from GoAPK link says it's outdated :S http://forum.xda-developers.com/showthread.php?t=875233
Will try EasyRecovery instead http://forum.xda-developers.com/showthread.php?t=1787541
Click to expand...
Click to collapse
ah man you are fast
Do not wipe after flashing cm10 and gapps (just before), if you manage to come that far.I think that's the key.
Vicsa said:
ah man you are fast
Do not wipe after flashing cm10 and gapps (just before), if you manage to come that far.I think that's the key.
Click to expand...
Click to collapse
OK What I did (from the rom with above specs):
Install EasyRecovery (Android Recovery 3e)
Wipe Data/Factory Reset
Wipe Cache
Install CM10 31st December 2012 build (CM10-20121231-NIGHTLY-mb526(last-in-2012))
Installed Gapps (gapps-jb-20121212-signed)
Reboot
Now I've got a bootloop between Red Motorola logo and Red LED with black screen :/
Going to try again from method 1, but install EasyRecovery instead of going to the second ROM
To do list:
Download this SBF and Flash it
Root your Defy (Using SuperOneClick 1.7 and not 1.9)
Install EasyRecovery from GoAPK.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM10+Gapps
Reboot
Click to expand...
Click to collapse
Don't forget also to wipe dalvik cache before you flash a custom ROM (CM10)!
Vicsa said:
Don't forget also to wipe dalvik cache before you flash a custom ROM (CM10)!
Click to expand...
Click to collapse
But... you can't wipe dalvik with EasyRecovery :/
Options are:
reboot system now
apply update from sdcard [this one allows installation of cm10 zip]
wipe data/factory reset
wipe cache partition
Not worked by the way :/ now have the ECLAIR motorola logo...
I'm pretty sure that I couldn't install cm10 before wiping dalvik cache, coming from the stock ROM. I'd try that outdated system recovery. They didn't changed that step, so I think it should work.
Vicsa said:
I'm pretty sure that I couldn't install cm10 before wiping dalvik cache, coming from the stock ROM. I'd try that outdated system recovery. They didn't changed that step, so I think it should work.
Click to expand...
Click to collapse
Alright, I'll give it a go tomorrow. For now I'm going to sleep =P Only got 2 hours sleep last night wrestling with this!
Thank you very much for your help!
You're welcome. Hope it'll work. Good night.
Vicsa said:
You're welcome. Hope it'll work. Good night.
Click to expand...
Click to collapse
No luck :/ it had the white motorola logo (from Eclair) still.. I'll try going that route from the FroYo
Re: [Q] Defy can't get back to JB
Did you try format data to ext4 from boot menu in file system tools, you have to do it after flashing cm10
Also, for good measure you can try using the system wiper zip
Sent from my MB526 using xda premium
thekguy said:
Did you try format data to ext4 from boot menu in file system tools, you have to do it after flashing cm10
Also, for good measure you can try using the system wiper zip
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I've tried the ext4 BEFORE flashing CM10... Damnit why didn't I try after =P haha.
I used a zip to wipe ext4 too... I'll give those a try, thanks
Try method 1 again, but use this newer version of 2nd init 2.0 instead of 1.4.3.
After that you could try this steps to install CM10 (copy/paste from FAQ):
For MB526 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-20120924-NIGHTLY-mb526.zip.
6) Flash Gapps.
7) Flash Battery fix (only for red lens)
8) Wipe Cache and Dalvik again (recommended).
9) Restart.
Because you haven't suceed to install 2ndBoot release, try this one to see if it works.
You are a red lens user, so follow all the steps and see wat happens..
I've tried it with 2nd init v2.3, but I'll give 2.0 and those builds a go.
Thanks for helping. Really confusing me haha
Vicsa said:
Try method 1 again, but use this newer version of 2nd init 2.0 instead of 1.4.3.
After that you could try this steps to install CM10 (copy/paste from FAQ):
For MB526 and PRE 2ndBoot Builds
1) Go to Custom Recovery.
2) Wipe data/factory reset, wipe cache and go to advanced ► Wipe dalvik.
3) Go to Install zip from sdcard ► Choose zip from sd card.
4) Flash gb Kernel (JUST FOR DEFY RED LENS USERS).
5) Flash CM10-20120924-NIGHTLY-mb526.zip.
6) Flash Gapps.
7) Flash Battery fix (only for red lens)
8) Wipe Cache and Dalvik again (recommended).
9) Restart.
Because you haven't suceed to install 2ndBoot release, try this one to see if it works.
You are a red lens user, so follow all the steps and see wat happens..
Click to expand...
Click to collapse
OK, that's different.
Boot:
1) Red M logo
2) Blue LED
3) GREEN LED
4) Red M logo no LED
5) Bootloop
I think what I need is a CM10 nandroid to install with the CM10 zip :/
All,
Wonder if anyone can help - I initially installed the v29 of this excellent ROM after rooting my SM9005 LTE Int. version note...all good.
Just downloaded and tried to install the v30 update and phone just gets stuck at model number screen - not splash screen - sits there
and refuse to go any further.
I re-flashed (via CWM) and wiped cache and dalvik even, but same thing.
I then did full wipe - user/data, system, data, cache formats etc. - same thing happened...
...any ideas? I've now reverted to my backup of rooted stock, but want to now flash v30 after doing another full wipe - should work this time or no?
Thanks,
Kam
Kamtong said:
All,
Wonder if anyone can help - I initially installed the v29 of this excellent ROM after rooting my SM9005 LTE Int. version note...all good.
Just downloaded and tried to install the v30 update and phone just gets stuck at model number screen - not splash screen - sits there
and refuse to go any further.
I re-flashed (via CWM) and wiped cache and dalvik even, but same thing.
I then did full wipe - user/data, system, data, cache formats etc. - same thing happened...
...any ideas? I've now reverted to my backup of rooted stock, but want to now flash v30 after doing another full wipe - should work this time or no?
Thanks,
Kam
Click to expand...
Click to collapse
flash the rom then flash this before rebooting http://forum.xda-developers.com/showthread.php?t=2507403 it should be fine
jaythenut said:
flash the rom then flash this before rebooting http://forum.xda-developers.com/showthread.php?t=2507403 it should be fine
Click to expand...
Click to collapse
Thanks for that Jay...
So I'm going to do this:
Full wife
Flash v30 of the ROM
Flash Gapps
Flash this efs corrupt .zip
...sound about right?
Kam
Kamtong said:
Thanks for that Jay...
So I'm going to do this:
Full wife
Flash v30 of the ROM
Flash Gapps
Flash this efs corrupt .zip
...sound about right?
Kam
Click to expand...
Click to collapse
yep sounds good to me
jaythenut said:
yep sounds good to me
Click to expand...
Click to collapse
Did it...same bl00dy result!
Any more ideas...I'm a bit confused by this one.
Kam
Kamtong said:
Did it...same bl00dy result!
Any more ideas...I'm a bit confused by this one.
Kam
Click to expand...
Click to collapse
UPDATE - so I just followed the above procedure but installed the previous v29 ROM and it worked??...