Related
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
look in artemis forum, they got the 2.67.9 radio rom in the latest artemis rom. we shoul b able to use it no problem. im willing to try it out 1st if anyone able to extract it.
Radio ROM 02.67.90
rdboyce said:
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
Click to expand...
Click to collapse
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
so did someone try it? i heard new versions were very bad for the battery life, hope this one is better.
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
rdboyce said:
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
Click to expand...
Click to collapse
Is there a G3 version?
Cutefox said:
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
Click to expand...
Click to collapse
I did pull it from the Artemis and I'm redoing it now. You're right it don't work but it doesn't brick. I looked at the size and the Hex Dump of both and they are similar. The Artemis ROM even had the G3 and G4 IPL and SPL when I decoded the ROM. I had so much hope but no go.
I was considering the Excalibur ROM as well but its bigger than the Prophet/Wizard radio ROMs. I'm more apt Prophet/Wizard Radios are usually around 2.5MB. The Excalibur ROM is 2.8MB. Not sure the the dedicated Radio space on the Prophet but the difference is just enough to brick.
I've already decoded it. If some one wants to try the Excalibur I'll post it.
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Confirming the radio rom does not work as well on my S200
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Jesterz said:
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Click to expand...
Click to collapse
I'm the same place after re-extracting it from the Artemis ROM. I'm going to wrap the Excalibur ROM. It'll be posted soon. Anyone wanting to try it, Have fun.
i've changed the header info a bit, but that doesnt seem to help either
Let's try the next ROM
Cutefox said:
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Click to expand...
Click to collapse
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
I do see that the other ROM was removed so...
If you post a G3 radio rom, I can try it on my Qtek S200...
rdboyce said:
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
Click to expand...
Click to collapse
Did anyone try the Excalibur build?
rdboyce said:
Did anyone try the Excalibur build?
Click to expand...
Click to collapse
I'll do a test soon, I'm playing with the new AKU 3.2 ROM and made a clean version.
Radio rom upgrade problem!
I upgraded my s200 RadioROM to 2.63.90. Now my Phone lost Radio Rom and lost the GSM signal. The phone become very slow and con't activesync to the pc. I have try but can't upgrade any other rom now! Can someone help me?
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Thanks very much! My Phone has come back!
GOGULETE said:
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Click to expand...
Click to collapse
Radio 2.63.90 removed.
The Radio 2.63.90 has been removed. It is incompatible the Prophet. I'm going to continue to research these Roms. Thanx for the input.
can someone provide me detailed information about xda o2 orbit rom upgradation from wm5 to wm6
thanks
What do you want to know about it?
You fill the details in on the website, download the rom and run it. It will wipe all the data on your phone as well
Kimbie
I think I'm either in the same boat as Chappad or at least on the sake river; I'd like to upgrade from WM5 to WM6 as I'd also like to flash Touch Flo 3.0. I've been banging around the WM site for a while now and can't locate the file to download WM6! Where is it or am I just not seeing what may obviously there?
The other thing I am really hoping for is for someone to bless the newbies with, oh, maybe a tutorial on how to flash a ROM like WM6 onto a device like, I don't know, like a Artemis/Orbit and then to install Touch Flo 3.0 on it.
That would be sweeeet.
Seriously.
Try this site for an "official" upgrade to WM6
http://www.my-xda.com/software_updates.jsp
or you can do a search on this website for other "cooked" ROM's
Simon
WM5 to WM6 (Info from HTC)
Try this official site from HTC, this woks flawlessly for WM5 to WM6.
http://www.asia.htc.com/asia/event/WM6/in/download.html
stevewrona said:
I think I'm either in the same boat as Chappad or at least on the sake river; I'd like to upgrade from WM5 to WM6 as I'd also like to flash Touch Flo 3.0. I've been banging around the WM site for a while now and can't locate the file to download WM6! Where is it or am I just not seeing what may obviously there?
The other thing I am really hoping for is for someone to bless the newbies with, oh, maybe a tutorial on how to flash a ROM like WM6 onto a device like, I don't know, like a Artemis/Orbit and then to install Touch Flo 3.0 on it.
That would be sweeeet.
Seriously.
Click to expand...
Click to collapse
bollyfan2005 said:
Try this official site from HTC, this woks flawlessly for WM5 to WM6.
http://www.asia.htc.com/asia/event/WM6/in/download.html
Click to expand...
Click to collapse
I just tried it and you need a password to log on, have you got one to use?
Otherwise you can use the link I gave previously which is an Official upgrade for o2 Orbit which is what he first poster in this thread wanted
Simon
chappad singh said:
can someone provide me detailed information about xda o2 orbit rom upgradation from wm5 to wm6
thanks
Click to expand...
Click to collapse
OK tell ya what, pick a ROM that u want to put on your Orbit n I'll tell ya what to do. How's that sound?
This. http://forum.xda-developers.com/showthread.php?t=371182
If this works out and, with your help and guidance it's stable; I will Paypal you a "Thank you". You have my word.
Why not do a "How to..." thread on the Artemis/Orbit forums here?!
Thanks,
Steve
www.clematisimages.com
So, Meschle...or any of the other Gurus around here; How about a "How to..." setting up a Artemis/Orbit to run WM6 and Meschle's Touch Flo? I just wish I had the know-how to do it myself!
Steve
Ok ya ready for it steve.... this is gonna blow your mind! (nah only messing, its so feckin easy ya'll shoot yerself).
1 - download the .zip file of your choice.
2 - extract the .zip file to a folder somewhere
3 - connect your Orbit to your PC and make sure it Activesyncs OK
4 - open up the folder you just extracted, run "STEP 1 - activesync then uspl cid unlocking.bat" - this will unlock the SPL and CID on our Orbit so you can flash a new ROM to it.
5 - Once thats done OK and your Orbit has reset, make sure to check that your SPL is now 1.11 (do this by resetting the Orbit and on the very first screen, in top left corner in red font it will display a few things, on being SPL)
6 - now reconnect your Orbit to the PC and activesync again
7 - and this time open the extracted folder and run "STEP 2 - activesync then flash artemis touch rom.bat" - this will bring up a screen asking to make sure battery is above 50% and things like that. Just follow the prompts and update the new ROM. Your Orbit screen will probably go white with a progress bar, thats fine.
8 - Once this is showing finished Ok, you should ow have a fancy new ROM.
BEAR IN MIND THIS WILL WIPE ALL OF YOUR PHONE DATA, MUCH LIKE FORMATTING A PC HARD DISK WITH A NEW OPERATING SYSTEM. SO MAKE SURE TO BACK-UP
im thinking of upgrading to xplode's WM6.1 Pro CE OS 5.2.19209 (Build 19209.1.0.2). took me quite a while to consider this upgrade, though.
but before i do so, i want to upgrade my radio rom and bluetooth stack first. question, what's the latest radio rom? is it 1.15.00 as i have read in the wiki? and how about for the BT stack version, is 1.0.0.3900 the latest? coz i've searched and found a 1.7 or something like that(its kind of a large jump from 1.0.0xxx version to 1.7, don't you think?). oh, it says BT broadcomm 1.7.1, are those the same thing?
please, could someone give me some information about these. im not new to upgrading ROMs, im on wm6 now.(so stupid of me not to upgrade the radio and BT stack for wm6, though. just bare with me) thanks guys.
oh btw, are there some more steps i need to do before the rom upgrade?
the latest radio rom is 1.15.00
you don´t need to update bluetooth stack, because it´s only a driver for wm 2003 se.
hope that help !
thanks. so all i need to upgrade right now is the radio version? oh, btw, i wanna do a ROM dump so i can backup my current ROM to an SD card. but the link in the wiki seems to be not working. i remember that a file or program is needed to do the dump.
you need Multi-Port/USB TTY
it´s the attached file.
greetings from germany
David
thanks again. i still cant open that part on wiki, it just says "problem loading page". all i need to do to use this file is just run it? no other instructions?
edit: there is an included .txt file on the zip which i think explains how to use the file, i couldnt read it coz its in german. sorry.
Read, read, read!!!
zhenius said:
thanks again. i still cant open that part on wiki, it just says "problem loading page". all i need to do to use this file is just run it? no other instructions?
Click to expand...
Click to collapse
Before you do anything it is strongly recommended to read the usage of the mtty app because you can screw your device with an inappropriate usage.
Just an advice because mtty is a service app.
I suppose you should wait till that part of the wiki will be available again.
Or try Google
yeah, i am actually doing a lot of reading right now. im gonna search for info on this mtty. thanks. oh, something i've read on a thread, its not necessary to do a hard reset after radio upgrade on wm5. how about in wm6? do we need to do a hard reset? so i wouldnt have to do a ROM dump. just so i could slash out some steps in doing this upgrade.
I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?
You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
if you wish to install a original rom in the future remember to use spl downgrader to go back to SPL1.20
As always take memory cards from the device before playing and please read
Craigus said:
I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?
Click to expand...
Click to collapse
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay
PBL1 said:
You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
Click to expand...
Click to collapse
Thanks very much for your advice !
I thought I had to have an ActiveSync connection to load a new ROM onto my device. But you were right - very easy to solve.
responderman said:
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay
Click to expand...
Click to collapse
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.
Craigus said:
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.
Click to expand...
Click to collapse
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Very good point that may make all the difference
Jay
lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Unfortunately not !
I ended up loading AP3, and my GPS application worked on that. Now I've gone back to the official WM6 ROM. When I have some time, I might reload the AP4 ROM and try the new versions of the radio - but I need a stable device at the moment.
Thanks again
i just remembered
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead
god, got to love the community spirit
Up and Running
lakeman said:
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead
Click to expand...
Click to collapse
> ROM Version: AP 4.0 Platinum
> ROM Date: 11/09/07
> Radio Version: 1.58.00.00
> Protocol Version: 32.91.70.20.20H
Just an update for those interested. I'm now running AP4 with i-GO happily running away. Not sure I needed to update the Radio version, but you were right - I had to turn off the HTC HOME in Today.
Thanks for the help from those more experienced. It was greatfully received and, although I haven't had time to really use the upgraded device in anger yet, I am currently very happy with it.
Just one last thing. Have you got a link for the said 'michys large htc home cab', as that would be the icing on the cake to have that lovely Home available.
Thanks very much !
Craigus
Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
Also can I use the same 1.61 goldcard for my new HD2?
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Assistance (I hope)
Hi I am a newbee but the RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship is available as a link somewhere on the site.
I have just HSPL my voda leo and as part of the instructions from
DFT, bepe and Cotulla you should do the following to revert...
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button
Hope this helps...
MaskedMagi said:
Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
yes you do
Also can I use the same 1.61 goldcard for my new HD2?
i would recommend you to install hspl in order to install any cooked rom you want
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Click to expand...
Click to collapse
see above the answers
you need this
Hi
here it is but i did not try it by myself
http://rapidshare.com/files/3260420...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe
Thanks for your help guys, I'll see how I get on, the rapdishare link is down for the moment which is annoying though...
If worst comes to worse I'll just have to send it back with the 1.1 ROM, surely they wont find out then come back to my house and take the newer replacement off me?
I'll let you know how I get on, though might need more help in a minute given my track record!!
MaskedMagi said:
Hi guys as the title says I'm receiving a replacement HD2 tomorrow whilst giving my old one in and I'm afraid I'll get in trouble if I give in one with a 1.61 ROM. I flashed it with 1.61 using the goldcard method and I just tried running the normal installer for the 1.43 stock Vodafone ROM but I get this error:
"this update utility cannot be used for your pda phone..." Surely I don't need to use the goldcard method for the stock ROM do I?
Also can I use the same 1.61 goldcard for my new HD2?
Quick answers appreciated as I need to do this before tomorrow! Thank you very much for your help
Click to expand...
Click to collapse
As far as i know/read into it,
The goldcard you used already will work again, You might need to reformat and hexedit again before it will work as that is what i had to do on 2nd rom update.
Rapidshare works now
sbibif said:
see above the answers
Click to expand...
Click to collapse
addendum: YES you can use the same Gold card for your new device.
good luck with reverting to stock ROM, hope it works out for you!
Thanks just downloading the stock rom from rapidshare now. I got impatient so I just bought a one month membership, oh well I guess it will come in useful anyways, fingers crossed...
I have tried PDAVIET rom
http://forum.xda-developers.com/showthread.php?t=606816
its working fine ...
there are few bugs but running smoothly...
MaskedMagi said:
Thanks for your help guys, I'll see how I get on, the rapdishare link is down for the moment which is annoying though...
Click to expand...
Click to collapse
Rapidshare is always busy, especially in the evening (CET). Keep hitting the F5 button in your browser, and you'll get lucky. Otherwise, get up early tomorrow and download will not be a problem. Alternatively google for the file name, someone somewhere could have it
Aaand done. That was unbelievably painless. All I did was plug my phone in via USB and double click the ROM file I downloaded off rapidshare, then it worked like a charm didn't have to do a thing!! Thanks for all your help guys, these forums are amazing!