Related
Hey!
I've tried to install xrecovery, with busybox. I moved the 3 files from sdcard to system\bin\. I gave meself full permission to them, and i am sure that busy box is installed.
But when i shut down my phone, and press lots of times on the back button, when the "Sony Ericsson" is showing, the screen just freeze. I have to remove my battery to turn on my phone again.
Any advices?
i guest your chargemon files just broke... been happen to me before... just flash it with new firmware i use X10 flasher... so ur shakira will be better again...
How do i flash it? - I am a newb, in this.
well... if your xrecovery doesn't work
then try to use the .apk version to install xrecovery
http://forum.xda-developers.com/showpost.php?p=11667326&postcount=1
i try use apk to install xrecovery.. it fail...
soo... i use "rootexplorer" to put 3 file to system manually, and now success
I got my X8 2 days ago. After installing root, xrecovery, and JIt enabled, it seems that I cannot power off the phone when charging. I tried many times. Whenever I power off the phone and chagre, the phone automatic powers on itself.
How can I keep powering off my phone when charging?
Currently I'm using stock FW 2.1.1.A.0.6, not any cook rom.
(sorry for my bad English...)
You can't.
i guess,, power off only work on original firmware, no jit,no root, no mod..
was reflash with original firmwre,, and when turn off,, usb still plug in on PC...
got big icon bateries with flash.. and phone doesn't turn on..
but anyways.. wat the matter with that??
apparently some of the roms have a fix built in but the newest version of 2.3 douse not, I had the same problem so I just backed up all my data and re installed the official version of 2.1 using the Sony Ericsson manager, this worked for me but you need to have a version of 2.1 installed.
Benjoy Ericsson said:
I got my X8 2 days ago. After installing root, xrecovery, and JIt enabled, it seems that I cannot power off the phone when charging. I tried many times. Whenever I power off the phone and chagre, the phone automatic powers on itself.
How can I keep powering off my phone when charging?
Currently I'm using stock FW 2.1.1.A.0.6, not any cook rom.
(sorry for my bad English...)
Click to expand...
Click to collapse
its xrecovery..xrecovery that make your phone power on if charging thats from what i know. so if u want to power off while charging,u cant have xrecovery install
change your chargemon file (xrecovery version) with the real version... but u. can't use xrecovery till u change it back
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
My tf101 cannot enter recovery anymore
when i try to enter recovery ,
there is a " ! " on the robot , then tf101 reboot automatically
then freeze on the ASUS logo page
I cannot boot up the machine in normal mode too !
my tf101 is B70 version, someone help..thanks
! with the Android guy is recovry, stock recovery.
instead of Vol up to get into revovery, wait till you get options to cold boot or wipe device.
try booting that way.
also what were uou doing when it gotvstuck at that screen?
baseballfanz said:
! with the Android guy is recovry, stock recovery.
instead of Vol up to get into revovery, wait till you get options to cold boot or wipe device.
try booting that way.
also what were uou doing when it gotvstuck at that screen?
Click to expand...
Click to collapse
i tried cold boot , but it said cold booting up linux .. but no response
i tried wipe device , but it still freeze on ASUA screen too
yesterday, i try to root and install CWM via Prime V4.5
then the device comes this .....
Thanks ...
Never heard of that root utility before. You may not have used the right rooting utility for your device which can cause a brick situation. Also, are u sure u dont have the tf 101 and not thr tf prime? The vipermod utility found in the tf prime forum will root ics for both the 101 and prime. My suggestion is that u make sure u have the right device and search the right forum for brick recovery, unroot, or return to stock threads. They are usually found in the development sections.
Sent from my SGH-I777 using XDA
viperMod PrimeTime 4.5 will only root the TF101 and shouldn't be used to install CWM. That's why it bricked.
cholywell said:
viperMod PrimeTime 4.5 will only root the TF101 and shouldn't be used to install CWM. That's why it bricked.
Click to expand...
Click to collapse
i had an issue that was caused by lack of sleep last night that i might be able to help this guy out.he never used it to flash CWM.. he rooted it and never flashed from within the CWM app. The stock recovery doesn't have options for choosing files ect..
victor1144 said:
My tf101 cannot enter recovery anymore
when i try to enter recovery ,
there is a " ! " on the robot , then tf101 reboot automatically
then freeze on the ASUS logo page
I cannot boot up the machine in normal mode too !
my tf101 is B70 version, someone help..thanks
Click to expand...
Click to collapse
I might be able to help you... I saw your post around 4am. I had the same problem kinda. Was asleep most the day (got done at 6am).
I rooted with viperMod PrimeTime and it worked !
BUT i forgot to FLASH CWM RECOVERY from inside the app and proceeded to install the new ROM after root was made USING the CWM app. What happened in my case , the CWM app restarted trying to flash the new ROM, WITHOUT CWM being my recovery instead rebooted to STOCK recovery and something glitched up. I had the same thing as you stuck on Eee pad never re-starting. Cold boot wouldn't work or full wipe..In my case something conflicted.
Below is the NVFlash of the 3.2 Build of 8.6.5.13 (Latest Build). You need to re-flash again using APX threw your USB connected to a PC (it self installs) :
http://www.tabletroms.com/forums/tr...stock-3-2-recovery-roms-unbricking-tools.html
the links are in Grey btw and says US version, ect ..read everything but its very straight forward... ill explain what i did toward the end of the post to simplify it since it took awhile to figure it out. Ill add side comments threw the process that explains better than the link.
Attention: These tools are designed to bring your device back to working condition. They are great for getting back to stock if you need to send your device in for repair or you need to downgrade to stock in order to root your device, etc.
Instructions for Windows users:
1. download the file from the original link i gave above. NVFlash of the 3.2 Build of 8.6.5.13 (Latest Build) USWindows
2. unpack zip to desktop.
3. Press Volume up and Power at the same time on your Transformer to enter APX mode, connect to pc (hold for about 7 seconds). Basically, Power off.. THAN, power and Volume up at the same time to enter APX mode. IMPORTANT!! the screen remains BLACK like its frozen ,with no writing or indication something is happening. that's normal and the original poster in the link never mentioned it. That is APX mode..
4. drivers for APX are in there if you need them..inside the windows downloaded file its called NVFLASH towards the bottom
On your PC go Device manager.. if APX is working correctly and the Transformer is in APX mode it will appear as an exclamation on the device manager named APX.. you cant miss it.. it stands out. On my Windows 7 PC it changed and said Asus USB (or something like that)
5. double click Run Download.bat file and let run! everything is prepackaged so no copying files, etc. In the same file you downloaded that you unzipped named Windows its the 4th file that says "download" with a gear looking icons.
Your Transformer (based on what happened with mine) will go threw a self install like its pushing files and flashing it..the black screen looks like its being pushed the files and reflashing without a recovery. Your going back to stock. if you dont see anything on your Transformer screen after running/double clicking the Download.bat file ....Right click on APX in the device manager , properties, Drivers, update Firmware, choose manual install and find the Downloaded.bat file and click it. That should do the trick..I did both and only noticed the Transformer lighting up after manually pushing it threw APX.
6. After the device reboots power it off. Then hold vol- and power until you get the option to erase your data.... Select the option to wipe data.
7. Download the latest update from the Asus website if applicable and follow the manual instructions. This step may not be necessary if your OTA update worked or my nvflash is the latest version. US update on there site is 9.2.1.17.Its the only one...
What i did was go back to stock since i didn't see any interesting ROMS..Point is THAT unbricked my device by flashing it in APX mode when it was connected to the PC.
I did use ViperMod again to Root, but used the Clockwork mod app in my Transformer to FLASH CWM RECOVERY to try a few ROMS out.
After trying a few of them out i choose to revert everything to stock, unrooted and reflashed STOCK recovery.
Hopefully that helps you out.. it did work for me...
Thank you so much it worked great
Lantek23 said:
Thank you so much it worked great
Click to expand...
Click to collapse
Glad i could help
Sorry to dig up slightly old threads, but I have a question for you. I have a TF101 that I was trying to update to ICS. It is currently running 3.2 courtesy of the unbricking tool listed in this thread. I had to unstore it as it was bricked from a bad install. That was many moons ago. It won't show an updaate listed, so I decided to go with the manual route. I downloaded the appropriate update (my device lists WW version) loaded it on an SD card had the install prompt come up and rebooted to install... For a split second it shows the android with the gears like it is installing the update and then shows the android with a triangle and exclamation mark. After that, nothing. I have to reboot to get it off that screen. Upon booting, I get a message saying system update failed (2) unknown error. Any ideas?
If Im not mistaken, the zip file you download (I guess from asus?) contains another zip.
Thats the zip you should place on your SD card, did you do that?
Also try renaming that zip to EP101_SDUPDATE.zip (the one extracted)
I already had the zip extracted, and renaming didn't do anything.
Killa357 said:
I already had the zip extracted, and renaming didn't do anything.
Click to expand...
Click to collapse
Are you rooted? Did you remove any system apps?
Another thing to try is on your micro sd card, make a folder name ASUS and inside that folder another folder call Update, inside the Update folder put the extracted zip file (don't rename). Turn off TF and turn it back on, see if it will detect the update file.
If that fail, you did mentioned you use the unbricking tool, use that NVFlash to flash a compatible ICS ROM
It isn't rooted anymore since I ran the unbricking tool, and no system files were modified. Placing it in Asus>Update folder didn't work. I may end up having to really do things manually...
Killa357 said:
It isn't rooted anymore since I ran the unbricking tool, and no system files were modified. Placing it in Asus>Update folder didn't work. I may end up having to really do things manually...
Click to expand...
Click to collapse
You don't need to be root to use NVFlash.
Just when with a slightly older version of the update and it worked. There may be something wrong with the file Asus has hosted.
Hi
I have a slightly different problem. I have rooted my B60 serial number, it has the ICS from ASUS on it and it boots fine, its rooted and it works. Now the problem is I thought lets try a clockwork mod and play with custom roms.
So I set my win 7 up to adb etc, and pressed power button volume button - and off to recovery I went...
but all I got was a little green android on its back chest open and an exclamtion mark. No adb fastboot devices command.
I seem not to have a recovery nor a way of forcing a custom recovery.
Should I NV flash or just be happy the tab works and leave well alone?
Any other answers since a lack of recovery may come back to haunt me sooner or later.
I also tried the power button vol uyp for 7 secs and nothing happens I can get to the cold boot erase data option on power down, don't want to do that yet since Im not sure what data gets erased and I may have a totally non working tab.
Use RecoveryInstaller to install cwm recovery
Use RecoveryInstaller to install cwm recovery
This is my problem I can't get recovery - nor can I get adb to see the device. It shows as a hard drive/storage device but not in adb.
Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.
Reserved
reserved
when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks
Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!
Is that work with bl7 ???
I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.
OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance
I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour
Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.
Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2
hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?
Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.
cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.