Related
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
mustbiw said:
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
Click to expand...
Click to collapse
Hey, your gonna have to repair your phone using SEUS.
Get the right baseband before flashing a ROM. Comon buddy, have you searched before asking?
C'mon mods..move to proper forum....
As for the problem.
Connect your phone to pc and run either SEUS or PC Companion.
(If you donty have these, google them and download them)
Then follow the instructions.
I have tried to enter safe mode by pressing right n left button + power button but I can enter n there's notification to do force close... please any ather solution..
mustbiw said:
I have tried to enter safe mode by pressing right n left button + power button but I can enter n there's notification to do force close... please any ather solution..
Click to expand...
Click to collapse
Leave this thread alone now.
I have answered in the other thread you started in the correct forum of Q&A.
I will go there to help you...
THIS IS NOT A DEV TOPIC
Moved to proper forum.
To resolve issue, you might want to try flashing it using SEUS and make sure to delete the db file/folder of SEUS
Which custom zip (ROM I assume) are u trying to flash w/ xRecovery?
I remember I had problems w/ CM7.0.3 when battery is ~20%. The phone would reboot like crazy. If this is the issue, try flashing the custom kernel v3.51. After flashing custom kernel, that solved my problem.
If nothing else work, flash w/ original firmware, wipe SD card, root, install xRecovery, load custom ROM file(s), and try again.
Hi everyone
First post here. I've been reading a lot in xda forums about rooting, installing cooked roms and stuff.
I've managed to root my x8, installed xrecovery (this saved my *** a few times).
As you guys know, to install the newest roms you gotta have the 015 baseband, and i got the old one (006).
I got all the tools i need, superoneclick, flashtool, correct baseband file and the original one just in case.
But somehow i can't get into flash mode. I unplug the cable, turn off the phone, hold the back button, plug the cable again while holding the back butto. The green light turns on for a minute, then.....nothing. The phone wont turn on unless i release this button, and if i release it i get out of flash mode :/
Has this happened to any of you guys?
ps: i noticed this baseband thing since i installed a cooked rom and got an infinite reboot loop. But i had the xrecovery installed, i just restored to my original firmware (it's 2.1 btw) and works great.
EDIT: I forgot to say that i can't use pcc recovery or seus because of this flash mode problem (they both work, but i get stuck at the flashing step)
Why dont u get update baseband from pcc first?so u can freely installing any custom rom,
Sent from my X8 using xda pertamax
Thanks for the reply.
I can't do any upgrade/update through pcc because when i get to those 4 steps (unplug, turn off, press and hold back and plug in) i get stuck in a black screen. I can never get to the flash mode screen, so neither pcc nor seus or flashtool can do the trick since they ask me to follow the same steps.
So far the only things i've succesfully done were
*root
*installed io file manager
*installed root explorer
*installed xrecovery
*installed a ROM without knowing about the "baseband thing" and messed the phone (but ran a restore with xrecovery and it worked great)
Any other ideas?
Could it be that when i overwrote chargemon in system/bin during the xrecovery install the flash menu got disabled? In that case i would need an original chargemon mmm....
That was it, the xrecovery version i was using was very old. I installed a newer version with flashtool. Problem SOLVED
Post to delete.
first let me tell you how i bricked my tablet... i was on cynogenmod 10 but i wanted to go back to 9 but for some reason because of all the freezing when i was wiping i accidently loaded the official asus rom update US epad etc etc so when i rebooted it gave me that bar and its stuck there i tried to reboot it to recovery but it wont give me the option to go into recovery like it did.
its said something like checking for android ota recovery...so i cant go into adb because usb debugging is not enabled in my tablet because i wiped right so I can go into apx mode because i can see it show up in my devices but it wont do anything with the easy flasher program, it acts like its goinng thru thr proccess but nothing happens on the tablet.....so then i went to try to update the drivers but everytime that i point the apx driver into the file it said that the driver is up to date..... so that where im at now please help me......
I donwloaded NVFLASH but i get that black screen it takes the tablet out of apx mode and the black screen desappears. and i think the same is happenning with easy flasher something is happening at the end that it does not finish the process
You get the OTA message because you removed CWM and moved back to Asus recovery.
You can try to reinstall an Asus stock ROM using the stock recovery. Get an Asus stock ROM (e.g. the one you already flashed), put it on a SD, power off the device and reboot into recovery.
Stock recovery just checkes the SD and if it finds an Asus ROM there it will install it.
I don't remember if the file had to be named something special or not, sorry :silly:
CalvinH said:
You get the OTA message because you removed CWM and moved back to Asus recovery.
You can try to reinstall an Asus stock ROM using the stock recovery. Get an Asus stock ROM (e.g. the one you already flashed), put it on a SD, power off the device and reboot into recovery.
Stock recovery just checkes the SD and if it finds an Asus ROM there it will install it.
I don't remember if the file had to be named something special or not, sorry :silly:
Click to expand...
Click to collapse
Yes rename to EP101_SDUPDATE.zip
Remember to extract the zip from within the zip first, rename the extracted zip.
Thanks!
I have done it lots of time but never quite remember if I should use the zip I download or the one inside it, and which name should this file have... I always end searching the same info over and over :silly:
so even if im stuck on that screen , when i put the update in the sd card it will recognize it immidietly without doing anything special? ill try that, i have tried to install the naked driver on all my computers and it wont let me , im getting a message that said that there is no software for my device in the folder.......... i really appreciate the help guys ill try that tonight see how it goes...do i have to format the sd or something or just place the file in root any other options witll be appreciated, what i dont understand is why there is not like a stock recovery or something
i dont think its gonna work because i dont get the screen that allows you to put into recovery i just get a message that states checking for android ota recovery
Well. Ler me tell you how I did it. It's been sometime since I used stock recovery, but I think it's allright.
1. Download the desired stock ROM from Asus.
2. Unzip the file. You will find another .zip file.
3. Rename this new .zip file as baseballfanz said.
4. Put the renamed .zip in the root directory of a uSD card.
5. Power off the TF.
6. Put the card into the TF.
7. Press Vol. Dn. + Power and keep them pressed until power is on and you see a message in the screen.
(Don't do this... If you press Vol Dn again you will get two options: wipe or coldboot)
8. As soon as you get the message in small caps press Volume Up.
Now the TF will look for an update in the uSD and install it. You won't have to do any further action. If it doesn't work the TF will tell you (I think it was and android with a red X, or with the innards showing or something like that :laugh: )
If this doesn't work then maybe you don't have stock recovery installed ok, or there is some problem with the zip file.
I am so confused .
Im very new to messing around with phones... yes you can call me a super super NOOB
my phone was already rooted and was running a
miui rom (Elite.ROM.v9.7.FIXED.with.Galnet.by.TerraMino_2012-02-18)
(oxygen2.2.2-u8800-test-110914)
i wanted to change it and tried to update CWM coz it was running an older version something like 5.0.---
i installed the file b518 and when i restarted my phone the phone got stuck in a boot loop.....
I can not access CWM
my phone does not come on and is in a boot loop
the only thing i can access now is the pink screen which i can view the image folder
Before this i had made a copy of my whole SD card on the computer...
so if n e files are required i can access it.
I have the zip files that are listed above
PLEASE HELP ME .....[/I][/B]
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
hmm..try it:
go to in pinkscreen, connect phone to pc via usb and replace recovery to custom; boot in recovery (power+vol.up), wipe all (data/factory reset) and try to boot phone.. or install another rom in recovery
TheJoker0 said:
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
Click to expand...
Click to collapse
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
sudhodhan said:
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
Click to expand...
Click to collapse
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
some one please help me
sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
forumber2 said:
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
Click to expand...
Click to collapse
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
sudhodhan said:
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
Click to expand...
Click to collapse
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
forumber2 said:
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
Click to expand...
Click to collapse
hey thanks a lot i i got it back to the stock version
feels awsome to have sorted this nonsense....
big headache gone..... i dont know if i wanna mess around and upgrade it again... lol
Any help PLEASE! How did you do it?
Hi everyone,
Firstly let me thank anyone reading this in advance! Secondly let me extra thank anyone who helps me in advance!
Sudhodhan. How did you fix your phone?
I rooted my phone. Then I copied a new boot.img file into './cus_backup/image' directory and now the phone wont boot. It just keeps rebooting. I've looked through this forum but cant seem to find an answer. People with similar problems but not exactly the same.
When I go into the pink screen I cannot see the recovery image folder when I pug the USB from phone to computer.
My phone has android 2.3.5.
I cannot access the clockwork recovery mode (by holding power + vol up) it doesn't work anymore or at all?
I have Ubuntu and Xp on my computer.
When I connect phone to computer (while in the pick screen) ubuntu recognises a huwei device attached but adb does not see it. previously adb would see the device.
However when I let the phone keep rebooting endlessly there are moments when adb sees the phone. I have even opened a shell in adb on the device for a little while. but when I did I could not see any hidden directories or the './cust_backup/image' directory. I tried to push the original boot.img file over but that did not work either!
I am stuck.
If I could see the image directory while phone was in the pink screen I could copy original boot.img.
Any suggestions!
Cheers
Hi Koffs,
First check if your phone is U8800 and not a variant like U8800-Pro (+), U8800-51 or U8800-H.
In the case you have a regular U8800 I would suggest you install a stock rom.
For now I recommend B518, find here the link:
http://www.mediafire.com/download/p...1_(Beta1.0)(Overseas_Normal)(Gingerbread).zip
My lcd screen cracked last year, so i gave phone to local service and they repaired last week. I am trying to install a new rom for days but i cant manage.
I tried cm version13 and aurora, but my torch doesnot work. EVen in camera, in flash mode. Should i again open phone and look if there is a problem or it is about software?
And other question, i cant mount my internal sd card. WHen i open es file, it only shows /sdcard, and nothing more.
Now i opening storage, total space 1.40 gb, apps 32 mb, intrnal stroage 1.02 gb and i took of external to see. In file exploerer, again i can only see sd card0. I cant see my system or anything. 1-2 years ago i could see my system.And i connect to pc, there is only one parttion. 1-2 years ago there were 2, one of internal sd other one is phone memory.
Please help me to solve this. And i mneed a rom that is only fast and using battery nicely.
Why noone helps now i cant open phone. Swm 5.0.8 cant mount sdcar sdext and i formatted data so it cant opened. How can i fix that? I want to go back to stock rom to see if there is sd card is working and myt torch isworking.
You can mount phone on pink screen and add the latest recovery from there.
rqmok said:
You can mount phone on pink screen and add the latest recovery from there.
Click to expand...
Click to collapse
Thanks rqmok. You are a great helpful person. You are trying to help me for days.
I went into pink screen. It automatically went update (i had put dload to stockr room update ,). Then i tried to open but still rebooting without oğenning.
So i went into rewcovery but i saw that it is android recovery, not cwm i installed. So i tried a lot of tgihngs.Then i installed aurora v20, but ittis interesting, i opened phone after that insstallation. It shows 2.3.5 rom, stock rom original rom.
I did not understand that.
And my flash again doesnot work. Should i give this back to the repairman to solve?
PLease looık my pictures.
pic 1 shows my first original screen. It was cracked under door and there were a lot of scratchs on phone screen. When i opened phone ,i could see scracths. So i bought from eb ay and gave a repairer. He made it. I dont know if it was well.
Then i put my foot on it slowly, but it again cracked. But i could not see scratchs. When i opened the phone, i could only see light not scratchs. So igave to same repairer without buying a screen. Pic 2 shows my 2. screen that came from ebay, there are no sctracts.
Now , my flash is not working and torch. I tried in a lot of roms. IT is not about software i think. And i have to press a lot of times to enable phone.
What do you say about that?
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
rqmok said:
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
Click to expand...
Click to collapse
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Cursed Chico said:
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Click to expand...
Click to collapse
You can't view your sdcard files from pink screen.
If you are able to install a ROM and make it work then that will be good. But, you have said that this happened after replacing the screen. So, if you can open the phone and check for any disconnected cables that need to be reconnected then you should fix them. There should be a video on YouTube on how to do this. If you cannot do it then you will have to get it repaired.
I dont have screwdriver, i have 3mm, it doesnot work.
But after screen replacement, i used aurora for 7-8 days. Then i thought partition was wrong and deleted wiped. Now but i cant install a rom. İ nstall aurora but it opens 2.3.5 with pink screen.
What size screwdriver do i need?
Now in android recovery i wiped daya, wip cache and then restarted, then trierd to update on pink scrteen, it gave error. So again wiped datya. Now i could open it. it shows 2.3.5. İf i restart, it will be deleted again i guess. What should i do? Wİthout power off, update? I will try to install cwm
I tried to replace recoveryimg but i failed. Because ihad to install superuser, so it rebooted and phone again cant boot up, restarting a lot of times. I dont understand what the reason is
Again, i did revocery android, wipe data and cache , then rstarted. After a few boots, 2.3.5 opened. Then i again restarted and now it is trying to start again 10. times. I n my ext sd, there are dload and other zips, that can be reason? I dont want to delete those because if i delete, it will be hard for me to insatall those files
Now it is restarted, huaewi logo appears, then pink and colurful fireworkds, than black svcreen and contunes....
After wipping, i restart and it is fine, i could go into 2.3.5. But when i again restart, smetimes it again opens but as soon as desktop opening, it starts to begin,
android stops working
calendar stops working
a lot of windows. I click end activity but it repeats alot of times.
So, my original stcok is damaged or what?
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
rqmok said:
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
Click to expand...
Click to collapse
Not only apss, android system also huawei etc. I cant even click restart button to restart phone because of popups windows.
So when i click restart, sometimes it open 3. times but still apps closing, then restarting and cant show huawei logo. and botoing up in inifinite loop.
Stock partition, i will try but i wont be able to do it. I donthave cwm and in android recovery i t doesnot accept, cant mount sd card. I can only go into android recover, can only do wipe data cache, cant mount anything. Theen only can restart and sometimes i try to update in pink screen but failed in half of 1/2. So, how can i go to stock partition without restarting phone while open?
I think the 2.3.5 rom i downloaded (Portugal or Korean i dont remember) is can be damaged or wrong. But i think i cant change that too. I am locked.
What i should do, i dont know.
Still cant do. I go into android recovery, wipe data and then after 2-3 restart, it boots. Then if i restart, there are a lot of windows appear showingstop activities. So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. It could make updates. But after updates, again could not start. After loading huawei logo, it restarts.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart .
Please help.