Related
Hey!
This is the issue: when I try to turn the phone on by just pressing the red button it goes directly to the fastboor menu. If I try to go to the recovery from there shows "TATTOO" for hours. If i try to go to the recovery dirctly by pressing HOME+ red button, it firsto shows the fastmenu for a second and tries to boot unsuccessfully. During this boot tries, I try to get some info with adb logcat, but the device is not casting anything. And well, if a picture is worth a thousand words, I guess a video is way better:
youtube.com/watch?v=zAejyMIVNGk (newbie, no urls!)
sorry for my english
And well, I have no idea how I got to this, this used to be my phone, but I bought a Nexus One and gave this to my sister, who has no idea what happened (as usual). Oh, this morning somehow I managed to get to the recovery menu, and booted until the android bootscreen, then vibrated and died again. I got to the recovery again, made a nandroid backup and wiped all data, it booted successfully, but the rom had no home application and ran really bad.
I was about to try to make a goldcard and install the stock RUU rom, but if I have no adb I cannot make one...
Any idea?
PS: the rom was nFinity 1.18 (2.2 Froyo) and the recovery was the lastest Clockwork.
PS2: I just realized that in every place I say fastboot I mean HBOOT, sorry again
sounds like recovery is still there, if you hold home + menu when phone if off , and then click red power button you should get recovery menu.
Then hopefully you can try full wipe and install a rom , rember the first time u boot a rom might take a few minutes
let me know how it goes
Yup, not using that method but I can manage to get to recovery sometimes. I'm trying to flash another ROM, but for some reason it doesn't let me. I've tried KalimochoAz (gingerbread) and HDCR (donut) and says something about assertion failed when checking if the device was click on the first case and in the second, complains about unsupported stuff...
I was about to try another roms by random but the SD does not refresh or even mounts, there must be something really messed up with this phone...
You can try to flash your stock rom from fastboot.
You don't need a goldcard, just run the update utility on pc, go to your temp directory and take the rom.zip file, rename it to CLICIMG.zip, copy it to sd card, put card on device and on fastboot menu pres vol down to start flashing the rom. I is the same version with the rom that device has before rooting, you will not get any errors.
I think there's a little misunderstanding here, mainly because of my confusion, it's not the fastboot menu qhat I get, but the HBOOT menu, and pressing the back button in order to access fastboot doesn't work...
oh I managed to boot something, I renamed the RUU exe to CLICDIAG.zip, because I could not find anything in C:\temp (is there where I have to look for the file?)
anyway, the zip appears to load on the phone, but once the progress bar completes, nothing happens... In my computer, the zip contains a .txt file and boot.img, but appears to be corrupt, and cannot extract any file (obviously, it's an exe)
so what do I do?
manutenfruits said:
oh I managed to boot something, I renamed the RUU exe to CLICDIAG.zip, because I could not find anything in C:\temp (is there where I have to look for the file?)
anyway, the zip appears to load on the phone, but once the progress bar completes, nothing happens... In my computer, the zip contains a .txt file and boot.img, but appears to be corrupt, and cannot extract any file (obviously, it's an exe)
so what do I do?
Click to expand...
Click to collapse
Of course will not work like this.
You must first run the RUU utility on pc and while is open to search your temp directory(maybe is inside another folder) for rom.zip file. This is the rom, the executable is an installation program which contain the rom and the app to flash the rom from pc packaged. You need only the rom.zip for flashing from sd card.
I've looked in the whole hard disk for that rom.zip after executing the RUU (I cannot get further than the step that tries to detect the tattoo, failing, so maybe it's not even created).
Apart from that, I managed to boot twice to what seems to be gingerbread, nFinity 1.18, but says in the lower left corner "Safe Mode" and I have no home application, no action on any button, just the notification bar and the lock screen. ADB doesn't work either.
manutenfruits said:
I've looked in the whole hard disk for that rom.zip after executing the RUU (I cannot get further than the step that tries to detect the tattoo, failing, so maybe it's not even created).
Apart from that, I managed to boot twice to what seems to be gingerbread, nFinity 1.18, but says in the lower left corner "Safe Mode" and I have no home application, no action on any button, just the notification bar and the lock screen. ADB doesn't work either.
Click to expand...
Click to collapse
You don't need to go so far. Just run the ruu utility and when the first screen appears go to temp dir(c:\users\you user's name\local\appdata\temp on windows 7). The executable is an encrypted package and when you run it extracts all included files and then starts the installation program. These files will deleted after this program exits(when the installation complete or an error occurs)
Cool! I just renamed it to CLICLIMG.zip and I finally loaded. The problem now is that when it finishes, instead of asking me to flash it, says
"CID Incorrect!
Update Fail!
Do you want to reboot device?
<ACTION> Yes
<POWER> No"
While running the RUU I made sure that it was for HTC Tattoo since it showed me the device during the steps. And I got it from a post describing the steps to flash it using the goldcard.
Furthermore, this error is something similar to what happened when I tried to flash from the recovery. This is REALLY weird...
Probably this isn't the sama as your device's stock rom. I think goldcard needed for flashing any htc original rom, but without goldcard only the device's version will be flashed successfully. Try to download other original roms if you don't know which you had before.
Here is a site with shipped roms for tattoo:
http://www.shipped-roms.com/index.php?category=android&model=Click
The RUU wasn't a problem, I tried now with a goldcard and flashed successfully! I could not get ADB connection to make it, but I once made one and still had the .img in my mail inbox.
But still nothing has changed...
pressing on drives me to the HBOOT screen, whose only options that work are "simlock" to flash CLICIMG.zip, and recovery (freezes on "TATTOO")
EDIT: does not freeze, but goes back to HBOOT after a while... ¬¬
You say that now you have the stock HTC rom and again you cannot boot it and instead the device reboots again to HBOOT?
Then maybe you have a hardware problem which leads to this behaviour.
OK, now I guess it still has warranty, but the problem is that I rooted it.
But now that I flashed somehow the original rom, should be no problem right?
Yes, if you successfully flash the stock rom, you're not root any more.
had that problem to, but theres easy fix for it without doing all whats being sayd here
Even tho phone dont boot annymore and stays on logo plug in the usb cable
and work with adb shell and reflash recovery (to be good tattoo-hack.ko etc tricks need to be done before doing it or you get errors)
http://forum.xda-developers.com/showthread.php?t=716282 step 1.5 and tools from step 1.3
and ether get Amon RA recovery or clockworkmod and use
Code:
./flash_image recovery /sdcard/recovery.img
then reboot into recovery
HTML:
adb shell "reboot recovery"
mount usb put in a custom rom and flash it
if all done well should work (had same problem)
bascly adb still work even if you think you bricked phone just have to let it "startup"
Greetings
I'm afraid that won't work. I've been trying all the time with adb logcat and adb devices unsuccesfully. I thought that the TATTOO bootscreeb would give me some feedback in all cases, but now doesn't seem to work...
I've had similar problems when trying to flash nfinityGB.
My problem was that I missed something on the way from
- creating a gold card
- rooting device
- installing recovery
- flashing rom
All I did was to download and execute "RUU_Click_HTC_WWE_1.67.405.6_WWE_release_signed_NoDriver.exe" (or any other ruu).
Be shure to have SDK with all drivers installed properly.
After this your device is in unrooted (original) state as dancer_69 already told you.
Now you can decide whether to claim warranty or properly follow the guides on xda to get root and flash custom roms.
I think I know from long ago what is happening here, just couldn't believe it. Maybe the keys are sticked or something, that would explain the always going into fastboot mode without pressing the VOL DOWN key. Now it boots 1 out of each 5 tries, and when it gets to the home app, it's on "safe mode" (achieved by pressing MENU key while booting).
I think they will take care for it back in the HTC support (well, I hope)
manutenfruits said:
I think I know from long ago what is happening here, just couldn't believe it. Maybe the keys are sticked or something, that would explain the always going into fastboot mode without pressing the VOL DOWN key. Now it boots 1 out of each 5 tries, and when it gets to the home app, it's on "safe mode" (achieved by pressing MENU key while booting).
I think they will take care for it back in the HTC support (well, I hope)
Click to expand...
Click to collapse
Something like this thought when I said that maybe is a hardware problem.
ok so here is what happened i have a stock US retail wifi only 16gb tab no clockwork recovery or none of that , im kind of a noob when it comes to that stuff, so today i received the update cool i downloaded it but it didn't install the first time for some reason. The it said a previous update was sucessfully downloaded but did not install do i wish to instal so i clicked yest and it said tab is about to reboot, clicked ok and it took me to this black and grey screen like the boot screen only with a loadbar and it zoomed to 100 percent. then i got the original samsung galaxy boot logo and the noise but no animation then the screen goes to this nasty screen with alot of colorful lines and dots everywhere and i cant see anything looks terrible.
Heres what i can do i can go into the bootloader by pressing power and volume. and i already tried to do a restore/wipe but didnt help, i can also plug it in to the computer and use the sd card and put and remove files from tab. im wondering if i can somehow get the update put it in the tab and install from there and see if it works or if i can get stock honeycomb and try to see if that works because they guy at samsung was clueless he didnt get the fact that i cant use the OS and said i need to get it serviced when i know its a software problem.
exact same thing happened to me! keep me posted
I've just got absolutely the same problem. I have a stock wifi 32gb version.
If you can get to your bootloader and sdcard still then why don't you just install CWM and try flashing the stock 3.1 OTA?
All the files you need and instructions are here: http://forum.xda-developers.com/showthread.php?t=1171089
Once you're done flash the stock recovery back and try the update again, or just wait for one of the devs to release a flashable zip.
sorry if im mistaken but dont i need to be able to use the tab and install something from the market place to be able to install CWM thats what im getting from what i read?
I can't even get my bootloader. Holy f**k am I pissed. Does anyone have any ideas??
Ok. So I installed the Samsung Kies software. It recognizes the device and shows that the update is available. However, it says that the battery should be fully charged. So now I am waiting for the full charge to proceed.
Hope the Kies helps.
I'll try that too. ahh
tonyurquiza said:
sorry if im mistaken but dont i need to be able to use the tab and install something from the market place to be able to install CWM thats what im getting from what i read?
Click to expand...
Click to collapse
No.
Go to the thread I linked, download the files, watch the youtube video.
1. Install the GT-p7510_USB_Driver if you haven't already
2. Start Odin - untick the auto reboot option
3. Click PDA and choose recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
4. Power up your tab and get it into download mode (power down + vol down, then vol up)
5. connect the tab to your PC, one of the boxes in odin should highlight yellow and say com 4 or whatever.
6. press start and it'll flash CWM to your tab
7. wait till it's done, it should only take a few seconds and the boxes will turn green.
8. power down your tab and unplug it from your pc
9. boot into CWM, (power down + vol down, vol down to select CWM, vol up to enter.
10. flash hc-3.1_ota-full_sam_tab_10.1.zip
11. do a factory wipe in CWM and wipe davlik just to be safe
12. reboot, and hopefully you'll be back to stock 3.1
From here you can do whatever you want.
Connect it to a PC and there's a firmware recovery on KIES. Hope that works!
Sent from my GT-P7510 using XDA Premium App
lordwinkevin said:
there's a firmware recovery on KIES
Click to expand...
Click to collapse
it didn't work for me. There were no devices in the list to recover.
I'm going to try it once my kies is finished updating. I really hope this works.
haha well first and formost i want to thank everyone for thier input. I did alot of searching online i tried KIES samsung tech support was useless. So i found the instructions on how to put clockwork on a locked bootloader got it on there and flashes the stock rom and it worked my tab is now back! only problem now is i tried to update again and only go the minor update and it doesnt find the big one lol but cant complain ill just wait lol thanks again. and to others who had the same problem dont deal with KIES to recover its useless unless you were using the program to update. I suggest getting CWM and flashing stock since thats what worked for me?
tonyurquiza said:
haha well first and formost i want to thank everyone for thier input. I did alot of searching online i tried KIES samsung tech support was useless. So i found the instructions on how to put clockwork on a locked bootloader got it on there and flashes the stock rom and it worked my tab is now back! only problem now is i tried to update again and only go the minor update and it doesnt find the big one lol but cant complain ill just wait lol thanks again. and to others who had the same problem dont deal with KIES to recover its useless unless you were using the program to update. I suggest getting CWM and flashing stock since thats what worked for me?
Click to expand...
Click to collapse
Glad to hear it worked.
Since you now have CWM, just download the flashable zip from here: http://forum.xda-developers.com/showthread.php?t=1198921
Make sure you do a factory reset in CWM after you flash this, otherwise you'll bootloop.
hoodoomagic said:
No.
Go to the thread I linked, download the files, watch the youtube video.
1. Install the GT-p7510_USB_Driver if you haven't already
2. Start Odin - untick the auto reboot option
3. Click PDA and choose recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
4. Power up your tab and get it into download mode (power down + vol down, then vol up)
5. connect the tab to your PC, one of the boxes in odin should highlight yellow and say com 4 or whatever.
6. press start and it'll flash CWM to your tab
7. wait till it's done, it should only take a few seconds and the boxes will turn green.
8. power down your tab and unplug it from your pc
9. boot into CWM, (power down + vol down, vol down to select CWM, vol up to enter.
10. flash hc-3.1_ota-full_sam_tab_10.1.zip
11. do a factory wipe in CWM and wipe davlik just to be safe
12. reboot, and hopefully you'll be back to stock 3.1
From here you can do whatever you want.
Click to expand...
Click to collapse
How would i get hc-3.1_ota-full_sam_tab_10.1.zip on my tab to flash via CWM if I can't get the tab to boot?
tonyurquiza said:
ok so here is what happened i have a stock US retail wifi only 16gb tab no clockwork recovery or none of that , im kind of a noob when it comes to that stuff, so today i received the update cool i downloaded it but it didn't install the first time for some reason. The it said a previous update was sucessfully downloaded but did not install do i wish to instal so i clicked yest and it said tab is about to reboot, clicked ok and it took me to this black and grey screen like the boot screen only with a loadbar and it zoomed to 100 percent. then i got the original samsung galaxy boot logo and the noise but no animation then the screen goes to this nasty screen with alot of colorful lines and dots everywhere and i cant see anything looks terrible.
Heres what i can do i can go into the bootloader by pressing power and volume. and i already tried to do a restore/wipe but didnt help, i can also plug it in to the computer and use the sd card and put and remove files from tab. im wondering if i can somehow get the update put it in the tab and install from there and see if it works or if i can get stock honeycomb and try to see if that works because they guy at samsung was clueless he didnt get the fact that i cant use the OS and said i need to get it serviced when i know its a software problem.
Click to expand...
Click to collapse
Mine did exactly this too, by the way....
I would go this way:
http://forum.xda-developers.com/showthread.php?t=1167250
/Doc
* deleted *
Thank you DocRambone, flashing that via Odin got me up and running.
Then I flashed CWM as per earlier post and then flashed the Stock UEKMB + root ROM and I guess I am good to go.
Ok guys. This is my report. I used the Kies to update. The firmware was updated successfully and now the tablet works perfectly!
So this is easier and less painful method than using CWM described above =)) (but thanks to hoodoomagic for the description anyway)
Hope this will help somebody.
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
kjy2010 said:
Need to know how you got back to stock recovery? Did you use Acer Recovery Installer?
If so you should just be able to put a stock 3.01 image on your SD card labeled "update.zip" and recover from there?
Click to expand...
Click to collapse
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
alexrb said:
Yes, K, I used that Acer Recovery Installer when I was still with civato's ROM.
So, from Acer Recovery menu, I flashed that "US stock recovery" version available there. Following that, I installed CWM from Acer Recovery menu again. So, I put that update cited above and... stuck on that!
mmm... but that update is 3.2 - I didn't try with a 3.01... let me see that...
UPDATE: the links from Vache post for 3.01 full packages are a kind of xml... It's not possible to get the zip files! Is there another available link, please?
Click to expand...
Click to collapse
alexrb said:
Well. that's the sh#%*t I made:
I tried to revert to stock then I used this package: Acer_A500_7.006.01_COM_GEN2.zip flashing it with vol. - + power button.
The problem is that the screen went on as it was install this update normally with the message "booting recovery kernel image", but, after spinning Android gears, the device is stuck at the green Android robot with the yellow exclamation.
If I try to boot with power button instead, then it's stuck on the boot screen Android logo (the shiny blue one).
I tried to reset and to flash another update.zip, unsuccessful. With the last ROM I had, civato Flexthunder, I had CWM, but now, neither it's menu is showed if I press only vol. - + power button - what I have is "booting recovery kernel image", then the Android exclamation on the screen. Notice that, when I was using that ROM, I had CWM. But I used Acer Recovery Installer to flash the US recovery from it's menu. After that, I installed CWM again with this Acer Recovery Installer...
In the end, I tried what I read here, but I can't solve on my own...
It's so confusing! How can I have my A500 back, please, someone!!!
Click to expand...
Click to collapse
Had the same issue, then I realized that the update.zip has to be on the EXTERNAL sd card...not internal storage.
Hope this helps.
kjy2010 said:
I'm not even going to ask why you used Acer Recovery Installer once you had installed a rooted ROM, because I'm afraid of the answer .
I think I might still have a 3.01 at home, but won't be there until Wednesday.
Click to expand...
Click to collapse
LOL
I got the point...
So, I've found a 3.01 here. I'm going to try it now...
Nothing
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
alexrb said:
So, I put the 3.01 from here:
http://forum.xda-developers.com/showpost.php?p=15379983&postcount=1
as update.zip in the SD card. Did it with vol - and power button. Again, the Android robot with yellow exclamation.
It's strange... everyone here did it and apparently it worked perfectly, why not in my case?
UPDATE: I changed the update for 2GB SD card. The progress bar went on briefly and so stopped in some point and, again, the Android robot with yellow exclamation.
Click to expand...
Click to collapse
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
bytemehard said:
Why dont you try the 3.1 Acer_A500_4.010.10_COM_GEN2 from Vache thread
http://forum.xda-developers.com/showthread.php?t=1113878
then run iconiaroot 1.3
The download is good.
Click to expand...
Click to collapse
I'll try it now, dude. Thanks.
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
erica_renee said:
Ok..
now then you have to ask..
What browser am i using to download this file.. How am i pushing it to the device.. Does the stock recovery like my sd card..
try downloading to using a diffrent browser / diffrent computer.. try pushing it to a diffrent sd card..
there is something in the above post that is consistant.. im guessing its one of the above i mention above that is your issue..
good luck..
Click to expand...
Click to collapse
Chrome.
And I'm pushing the update.zip with "send to..." right click option on the file.
Unbelievable if it's the issue... ?
alexrb said:
I tried what I found here:
http://forum.xda-developers.com/showthread.php?t=1176632
and, after the progress bar go until almost the end, it stopped, so do the gears animation, and after reboot, now I have my device stuck on Acer logo screen and the message, in red letters: boot verified failed ...
Click to expand...
Click to collapse
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
bytemehard said:
The update zips are region specific i believe. That one doesnt look like its for your region. It can get confusing.
Click to expand...
Click to collapse
You can be right, but since it's not made here, I suppose any update.zip can be used... or not... but in fact I'm not able to know what's the specific file for Brazilian devices... or can I?
man, it's 1+ month tablet! How could I do that? crying out loud...
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
mmmm... I renamed it every time I tried that!
I'll try it again...
timmyDean said:
You got your UID Serial number from the USB? It will be 16 digits long.
If so, use a paperclip and power button to put it into fastboot and then flash it.
TD
Click to expand...
Click to collapse
No, dude... I haven't got it...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
OOPS YOU ARE Correct . to flash with stock recovery.. only need to extract it to flash with cwm.. But i think its a bad download bad copy or bad sd card issue..
might want to get the md5 sums and check them before on the computer then again on the tablet... after you put the sd card back in the device.. I had this issue with a older 8 gb sd card back when acer first released the tablet..
Again stop trying the exact same thing. change one at a time and you will find your issue.. . AGAIN GOOD LUCK...
bytemehard said:
Take erica_renee advice......download the zip on your PC. make sure you extract the update.zip. from the file you downloaded. Open update.zip file and make sure it doesnt give an error. Im assuming you can use the same update as north america. I dont follow that too close.
If you have a micro card reader ...pop out the micro sd card and plug it into your PC and copy/past the update.zip to it....then put it back into the tablet and reboot into recovery....
that will at least remove some fault factors.
Edit--instead of extracting the update.zip file from the download you may just have to rename it to update
Click to expand...
Click to collapse
I did it. Renamed the file to update.zip, but the yellow exclamation came along briefly...
I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.
the menu that you seen in the video. was likely CWM RECOVERY. You do not have that menu due to the fact you do not have a custom recovery installed. the android with exclamation leads to believe you have acer recovery. Its limited Only able to flash a ACER Signed update.zip only .
Reply back with exactly what you did with details about rom version and so on . So someone can better help you. To get the right help we need to know how you broke it..
At this point Do not do anything until you know you are doing the correct fix for your situation.. You are NOT Bricked.. you just have a bad UPDATE.ZIP FILE OR Bad format on your sd card..
Help is close by..
To be honest i really do not know what rom version was used. Like i mentioned before. I myself have never rooted or altered an android device.
From where you are right now in a boot look .. where do you want to end up.. ROOTED ... STOCK TO WHERE YOU can accept the acer OTA. when they push them..
sounds like you may be able to reset the tablet withe hole next to the usb port.. You have to push quite hard to get it to push the Button..
Im guessing due to the lack of information you are providing.. Sorry..
Thanks for your help. The darn thing is still doing the same thing. Guess i got to do a little more research.
If you're asking for help you need to describe what actions exactly you have taken in order to reach this state (as Erica suggested) of your tab. From your post 1 thing is clear - your tab is unable to boot, but what has been modified before remains a mystery.
joester818 said:
I have had my acer iconia tablet for 2 months.
I am a total noob when it comes to rooting, flashing or installing new roms on any android device. Never done anything like it.
My tablet just boot loops and all i get is "green android icon holding a yellow triangle with an exclamation point".
What can i do. I have seen a youtube video of a user holding down the volume down + power key and he is presented with a menu to factory reset and cache resetting and all that good stuff. I do not get any of that. Any help would be appreciated.
Click to expand...
Click to collapse
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Just to complement Moscow Desire's advise: It's Vol (-).
drkalo said:
Just to complement Moscow Desire's advise: It's Vol (-).
Click to expand...
Click to collapse
Thanks! I can never remember which one, as I've never had to use it
Edited the instructions.
Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Be patient. Try later. Vach's server is probably overloaded due to the leaked ICS Rom.
You only need to get 1 of the A500 update roms. It's actually a fully signed rom in the file "update.zip" Just decrypt rom you the original rom you downloaded using the instructions, use winzip or 7zip to open the decrypted rom, remove the update.zip and copy it to your sd card.
And Then?
joester818 said:
Those vache-android.com links are not working. Do i need to have all of those files per update for the whole thing to work.
Click to expand...
Click to collapse
Hi,
did u succeed?
Rgds,
trying to recover A500 - boot recovery failed
Hi - I'm trying to reset and recover my son's A500 tablet. I copied one of the HC 3.2 Update.zip files to a microSD card, then held down Power and Volume - buttons. As long as I hold down the Volumn down buttin, the tablet seems to be stuck in a never ending cycle of loading the update and booting recovery image kernal, then restarting, then loading the update.zip file and booting recover image kernal, etc.... If I let go of the Volume Down button, I get in red letters "Boot Verification Failed" message, and it stops.
im trying to help fix an a500 tablet. apparently the tablet gets stuck at the acer logo. when i hit power and the volume button i get some lettering in the top letft. I took the advice here and went and downloaded one of the HC 3.2 updates. copied the update.zip onto the root of the Sd card and then put it back in. I hit the same buttons again and the letters came up. so i assumed things were working. all of a sudden i get an android with a blue diagram in its belly (kind of like it was loading) and then it froze. after waiting for a second I got a second android that popped on the screen and this one is laying on its back with its chest open and a red triangle is showing....So I don't know exactly what I did wrong here. Any help would be appreciated. I am not exactly sure what he did to mess it up. I believe he was trying to install a custom rom and did not go about it correctly and therefore messed up an update and now he has nothing. so im not sure what to do exactly.
Moscow Desire said:
Yeah, probably my guess, is you tab started to do an OTA update, and as in a lot of cases, it failed. And you're stuck with where you are now.
If using the pinhole reset near the PWR button doesn't work (a hard reset), then I suggest ;
1. Make sure your tab is charged.
2. Go to this thread, and select one of the rom update packages.
3. http://forum.xda-developers.com/showthread.php?t=1113878
Use one of the HC 3.2 update files near the end. Note that the Megaupload file no longer works.
Note that some of the packages are encrypted, so you will need to use the "decrypt" tool he has listed there in his 1st post. Copy it to PC, run it, select your encrypted rom, and let it do it's thing. This will give you the same rom, only states "decrypted" at the end of the file name.
4. Open the rom using Winzip or 7zip. Remove the update.zip (do not extract the contents of it), and copy it to the SD card (replacing a current update.zip if there's one there).
5. Holding either Vol- press and hold PWR. This should force the tab to install that update.zip (you should see some text on the screen, then you can release both buttons. Hopefully it will install.
Post back results please.
Click to expand...
Click to collapse
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp
mizzle54 said:
I to have had the same problem with my Acer Iconia A500. I followed the instruction and booted the Acer...got to the screen with the Android robot standing upright with the spinning in his stomach...goes to about 1/4 of the way and doesn't go any further....looks like it's trying to continue but has been at the same place for over an hour. Do I need a different rom perhaps?? I used A501.000.00_4.037.01.emea_tmp
Click to expand...
Click to collapse
Well, you can try this. Below are links to update.zip files already decrypted on my server. I have renamed them, only so you can keep them separate. You will have to change the name to "update" (update.zip) and copy one to ext sd card. Reboot holding Vol (+ or -) and PWR. See if they install. You may have to try each until one installs as there is no way to predict which one will work.
http://d-h.st/KXl
http://d-h.st/gw8
http://d-h.st/2cm
http://d-h.st/Zf8
This is probably the easiest method to try first.
MD
the "41-125-03-update.zip" seem to work for me. The status bar finally is showing but it doesn't seem to be moving. It moved to 1/4 of the bar and it stayed there. Last time it did this, it stayed there for over 2 hrs. I hope it's working this time. Anything else I could try?
My tablet was working fine and I left it there to go to work, coming back I found it on the Acer logo. Many search brought me here.
update ========
tried and tried and tried.......a few times that the status bar did come up, many times it stuck at around 25%. A few times it got all the way to 75% of the bar. It refuse to go farther when I left it there all night. It finally died when the battery was complete drain.
Acer A500 Stuck on ACER Logo (not rooted) finally fixed!
Just wanted to post some positive things for a change. My ACER A500 tablet (not rooted and running ICS 4.0.3) was working fine two months ago and I wanted to watch an ESPN3 football game on the tablet which I then hooked to my HD TV via the HDMI cable. For about an hour, all was fine then the tablet did an uncommanded reboot and then I had the android figure with an opened belly followed by an android laying on it's side with an exclamation mark. On the next restart, my tablet would not pass the ACER logo screen. After reading many posts with the stuck ACER logo, I was not sure how to proceed exactly. I have rooted a 7 inch tablet last year but I could not get my act together on the exact steps to revive my tablet. Finally I came across this post with the ACER ROMs already decripted which removed many questions I had about the exact steps to create an "update.zip" file for my SD card. Based on just downloading the file from your web site and renaming the file to "update.zip" and moving a copy to a formatted SD card, I was ready to try the process to load another ACER file to my tablet. On my first attempt, I tried the file named "206-03" based on a guess of the naming convention used or maybe blind luck. I preformed the PWR button and Vol down button combination with the "update.zip" file on the micro SD inserted in my tablet. The tablet started with three lines of text and then the android figure with it's door open and activity inside the android. This screen stayed then with a completion bar followed by a large text screen warning not to turn off tablet. After about 15 minutes total, my tablet was alive with a request to select my country. Bottom line, taking the steps to put the decripted file on your server and the simple button combination to start the reload process allowed me to get my tablet working great running ICS 4.0.3. I just wanted to post a success story and follow up. Thank you Moscow Desire for taking the extra steps to help the uneducated user!
Anyway I can check if my ROM hardware are working properly? I have tried all the update.zip and all of them show a dead android at the end. I can't even tell if it read from the microSD.
My tf101 cannot enter recovery anymore
when i try to enter recovery ,
there is a " ! " on the robot , then tf101 reboot automatically
then freeze on the ASUS logo page
I cannot boot up the machine in normal mode too !
my tf101 is B70 version, someone help..thanks
! with the Android guy is recovry, stock recovery.
instead of Vol up to get into revovery, wait till you get options to cold boot or wipe device.
try booting that way.
also what were uou doing when it gotvstuck at that screen?
baseballfanz said:
! with the Android guy is recovry, stock recovery.
instead of Vol up to get into revovery, wait till you get options to cold boot or wipe device.
try booting that way.
also what were uou doing when it gotvstuck at that screen?
Click to expand...
Click to collapse
i tried cold boot , but it said cold booting up linux .. but no response
i tried wipe device , but it still freeze on ASUA screen too
yesterday, i try to root and install CWM via Prime V4.5
then the device comes this .....
Thanks ...
Never heard of that root utility before. You may not have used the right rooting utility for your device which can cause a brick situation. Also, are u sure u dont have the tf 101 and not thr tf prime? The vipermod utility found in the tf prime forum will root ics for both the 101 and prime. My suggestion is that u make sure u have the right device and search the right forum for brick recovery, unroot, or return to stock threads. They are usually found in the development sections.
Sent from my SGH-I777 using XDA
viperMod PrimeTime 4.5 will only root the TF101 and shouldn't be used to install CWM. That's why it bricked.
cholywell said:
viperMod PrimeTime 4.5 will only root the TF101 and shouldn't be used to install CWM. That's why it bricked.
Click to expand...
Click to collapse
i had an issue that was caused by lack of sleep last night that i might be able to help this guy out.he never used it to flash CWM.. he rooted it and never flashed from within the CWM app. The stock recovery doesn't have options for choosing files ect..
victor1144 said:
My tf101 cannot enter recovery anymore
when i try to enter recovery ,
there is a " ! " on the robot , then tf101 reboot automatically
then freeze on the ASUS logo page
I cannot boot up the machine in normal mode too !
my tf101 is B70 version, someone help..thanks
Click to expand...
Click to collapse
I might be able to help you... I saw your post around 4am. I had the same problem kinda. Was asleep most the day (got done at 6am).
I rooted with viperMod PrimeTime and it worked !
BUT i forgot to FLASH CWM RECOVERY from inside the app and proceeded to install the new ROM after root was made USING the CWM app. What happened in my case , the CWM app restarted trying to flash the new ROM, WITHOUT CWM being my recovery instead rebooted to STOCK recovery and something glitched up. I had the same thing as you stuck on Eee pad never re-starting. Cold boot wouldn't work or full wipe..In my case something conflicted.
Below is the NVFlash of the 3.2 Build of 8.6.5.13 (Latest Build). You need to re-flash again using APX threw your USB connected to a PC (it self installs) :
http://www.tabletroms.com/forums/tr...stock-3-2-recovery-roms-unbricking-tools.html
the links are in Grey btw and says US version, ect ..read everything but its very straight forward... ill explain what i did toward the end of the post to simplify it since it took awhile to figure it out. Ill add side comments threw the process that explains better than the link.
Attention: These tools are designed to bring your device back to working condition. They are great for getting back to stock if you need to send your device in for repair or you need to downgrade to stock in order to root your device, etc.
Instructions for Windows users:
1. download the file from the original link i gave above. NVFlash of the 3.2 Build of 8.6.5.13 (Latest Build) USWindows
2. unpack zip to desktop.
3. Press Volume up and Power at the same time on your Transformer to enter APX mode, connect to pc (hold for about 7 seconds). Basically, Power off.. THAN, power and Volume up at the same time to enter APX mode. IMPORTANT!! the screen remains BLACK like its frozen ,with no writing or indication something is happening. that's normal and the original poster in the link never mentioned it. That is APX mode..
4. drivers for APX are in there if you need them..inside the windows downloaded file its called NVFLASH towards the bottom
On your PC go Device manager.. if APX is working correctly and the Transformer is in APX mode it will appear as an exclamation on the device manager named APX.. you cant miss it.. it stands out. On my Windows 7 PC it changed and said Asus USB (or something like that)
5. double click Run Download.bat file and let run! everything is prepackaged so no copying files, etc. In the same file you downloaded that you unzipped named Windows its the 4th file that says "download" with a gear looking icons.
Your Transformer (based on what happened with mine) will go threw a self install like its pushing files and flashing it..the black screen looks like its being pushed the files and reflashing without a recovery. Your going back to stock. if you dont see anything on your Transformer screen after running/double clicking the Download.bat file ....Right click on APX in the device manager , properties, Drivers, update Firmware, choose manual install and find the Downloaded.bat file and click it. That should do the trick..I did both and only noticed the Transformer lighting up after manually pushing it threw APX.
6. After the device reboots power it off. Then hold vol- and power until you get the option to erase your data.... Select the option to wipe data.
7. Download the latest update from the Asus website if applicable and follow the manual instructions. This step may not be necessary if your OTA update worked or my nvflash is the latest version. US update on there site is 9.2.1.17.Its the only one...
What i did was go back to stock since i didn't see any interesting ROMS..Point is THAT unbricked my device by flashing it in APX mode when it was connected to the PC.
I did use ViperMod again to Root, but used the Clockwork mod app in my Transformer to FLASH CWM RECOVERY to try a few ROMS out.
After trying a few of them out i choose to revert everything to stock, unrooted and reflashed STOCK recovery.
Hopefully that helps you out.. it did work for me...
Thank you so much it worked great
Lantek23 said:
Thank you so much it worked great
Click to expand...
Click to collapse
Glad i could help
Sorry to dig up slightly old threads, but I have a question for you. I have a TF101 that I was trying to update to ICS. It is currently running 3.2 courtesy of the unbricking tool listed in this thread. I had to unstore it as it was bricked from a bad install. That was many moons ago. It won't show an updaate listed, so I decided to go with the manual route. I downloaded the appropriate update (my device lists WW version) loaded it on an SD card had the install prompt come up and rebooted to install... For a split second it shows the android with the gears like it is installing the update and then shows the android with a triangle and exclamation mark. After that, nothing. I have to reboot to get it off that screen. Upon booting, I get a message saying system update failed (2) unknown error. Any ideas?
If Im not mistaken, the zip file you download (I guess from asus?) contains another zip.
Thats the zip you should place on your SD card, did you do that?
Also try renaming that zip to EP101_SDUPDATE.zip (the one extracted)
I already had the zip extracted, and renaming didn't do anything.
Killa357 said:
I already had the zip extracted, and renaming didn't do anything.
Click to expand...
Click to collapse
Are you rooted? Did you remove any system apps?
Another thing to try is on your micro sd card, make a folder name ASUS and inside that folder another folder call Update, inside the Update folder put the extracted zip file (don't rename). Turn off TF and turn it back on, see if it will detect the update file.
If that fail, you did mentioned you use the unbricking tool, use that NVFlash to flash a compatible ICS ROM
It isn't rooted anymore since I ran the unbricking tool, and no system files were modified. Placing it in Asus>Update folder didn't work. I may end up having to really do things manually...
Killa357 said:
It isn't rooted anymore since I ran the unbricking tool, and no system files were modified. Placing it in Asus>Update folder didn't work. I may end up having to really do things manually...
Click to expand...
Click to collapse
You don't need to be root to use NVFlash.
Just when with a slightly older version of the update and it worked. There may be something wrong with the file Asus has hosted.
Hi
I have a slightly different problem. I have rooted my B60 serial number, it has the ICS from ASUS on it and it boots fine, its rooted and it works. Now the problem is I thought lets try a clockwork mod and play with custom roms.
So I set my win 7 up to adb etc, and pressed power button volume button - and off to recovery I went...
but all I got was a little green android on its back chest open and an exclamtion mark. No adb fastboot devices command.
I seem not to have a recovery nor a way of forcing a custom recovery.
Should I NV flash or just be happy the tab works and leave well alone?
Any other answers since a lack of recovery may come back to haunt me sooner or later.
I also tried the power button vol uyp for 7 secs and nothing happens I can get to the cold boot erase data option on power down, don't want to do that yet since Im not sure what data gets erased and I may have a totally non working tab.
Use RecoveryInstaller to install cwm recovery
Use RecoveryInstaller to install cwm recovery
This is my problem I can't get recovery - nor can I get adb to see the device. It shows as a hard drive/storage device but not in adb.