I am currently using mn 4.6.16 on internal.
I had previously (and quite successfully) tried stock 1.2 on an sd card while I ran CM 7.0.3 or Phiremod 6.3 internally.
I just tried the new 1.3 zip on an sd card burned with cm 3.0.2.8 and the install action aborted.
Is anyone working on a 1.3 image similar to the following that was done for v1.2?
http://forum.xda-developers.com/showthread.php?t=1061523
My aim is to experiment with doing a mn to the sd card without distubing my current stable mn settings.
Thanks in advance.
Related
I just bought a class 10 16GB for my Nook Color. I'm running CM7.0.2 on EMMC right now and I'm interested in running HC on the SD card. Is it possible to use the newest SDK build by Divine_Madcat of the SD card? If not, what should I download? Do I need a 16GB image for my microSD card?
Thanks in advance.
Edit: Is it also possible to use the rest of the space on the SD card after installing HC on it for data?
DM's build of Honeycomb doesn't currently have an official SD version, but racks11479 has prepared a version (for RC1/RC2 at least, don't think he has updated with RC3) which can be installed to SD:
http://forum.xda-developers.com/showthread.php?t=998861
Once you have that up and running, you should theoretically be able to expand the SDcard partition on the card with software like EASUS Partition Manager.
I downloaded that. To install it do I boot into my internal Clockwork? What are the specific steps??
A while back I followed the directions to create an SD card bootable cm7 (from nightly). Everything worked perfect and with the card in it booted to cm7 and without it back to stock (rooted 1.0.1). When bn released 1.2 I decided to try it and re-partitioned my sd card to a single fat32. I used the adb method to indicate 8 failed boot attempts and restored the nc to stock then did a factory reset through settings. I was then able to install 1.2 downloaded from bn website. My assumption was that my nc was now 100% stock but it doesn't seem that this is the case. I now have a new sd card (not the same as I had first used) and tried to run cm7.0.3 using the same method as before. I downloaded the 1.1 version of the cm7 installer sd image and after writing it to the card I copied over the cm7.0.3 for encore rom. I put the sd card in my nc expecting to boot up to an install but instead it booted my old nightly build, wallpaper and apps intact. How do I remove this old installation and why was it not running strictly from the SD card?
Any help is greatly appreciated.
Hey all - I'm running CM7.0.3 on emmc on my Nook, and I love it. I've recently purchased an additional Nook Color for my girlfriend. She isn't so tech savvy, so I rooted her device to give her access to the market, etc., but left the stock B&N ROM on the Nook. I bought a 4gig SD card and used the size-agnostic installer from these forums to make a bootable CM7 SD card for her, since I know she wants the Netflix app, among others, that will not run on the stock ROM. If I boot from the SD card in MY Nook, and install gapps and Netflix, will those apps be installed to the CM7 SD card? Or will they be installed to the internal memory of MY device and not work in hers? I'd like to be able to prep the SD card before I give it to her so she can pop it in her Nook and be off and running. Thanks!
For Netflix, as an App it would normally load to your Nook's internal memory. However, you can change a setting in CM7 to load it to the uSD and then it should do so; or you can move it over manually. Not sure about the Gapps stuff though, it might be the same.
Hi,
I just got my new nook Color.
I still have a 2GB MicroSD card from my mobile(which was included in the box - NoName)
so i used the newest nightly 172 build and followed the SD installation tutorial
http://forum.xda-developers.com/showthread.php?t=1000957
it was booting into the installer did everything and after switching off I can not boot from the SD. if I take out the SD it will boot normally (Stock) but with SD dont boot.
Any Idea?
Buy another SD Card?
Change to another nightly build?
Thanks for help!
Did you try reformatting the card and starting fresh?
You can use most any file manager / partition tool to re-format.
Thanks a lot.
I used
- Panasonics SD formatter and i used
- win32diskimager-RELEASE-0.1-r15 (not 0.3).
first Problem solved!
NEXT ISSUES:
After I had a running system I installed few apps from the market and some apk (downloaded with browser).
after Rebooting I got the pinguin screen with some text lines but it wouldnt reboot.
I bought now a new 16GB Kingston Class 4 SD card.
I dl the new 173 build and try to get a running system with this setup on the SD but at the moment also with some issues (CM7 loading screen but not booting in CM7)
I think i will start all over from the beginning.
Thanks for Help!
thanks for help!
tried the 16GB Kingston Class 4 card now with "old" 172 Build with the same result ..... is 16 GB not supported from "generic-sdcard-v1.3.img" ?
I recommend trying CM-7.1.0-RC1-encore
http://forum.cyanogenmod.com/topic/...arnes-noble-nook-color-v710-rc1-26-june-2011/
When trying to install Tezet's CM10, I came across a problem with my CWM install, and was wondering if anyone was able to help me with recovering from it. When I go to choose SIP from SD card, it says unable to mount SD card, and in the logs it is unable to find find the SD card (cant remember the exact device, but was /deb/block/mmc...), but in android the SD card is on /dev/block/vold/179:1. I believe the problem would have originated when I tried the CM9 rom (went from CM7 to CM9, decided it wasn't for me at that stage due to being a bit to unstable still, so went back to CM7 and haven't flashed any roms since.
How can I go about installing an older version of CWM that is compatible with CM7, to be able to mount the SD card again, so that I can try the new mod. Everything I have read installs CWM from SD card, which is not an option for me, for obvious reasons.
Thanks in advance.
Nick