i have tryed every thing i saw on the web but no luck.
the phone says it has data but when i try to go on line it get nowear.
i have it installed on internal memory i tryed to re flash it to winmobile but i cant get the the 3 clour screen every time do i hard reset it goes to the original rest screen that it came with factor that says push menu to do factory rest but that dont do me any good because android wipe out wm i need help im lost so please help me any suggestions would be great
Related
With all this talk about WM5 devices not really resetting everything after a hard reset, and my device being dead and not recovering after a hard reset makes me think, there must be an alternate way to really hard reset a device back to factory condition.
I tried a lot of combinations of presses to no end. The only thing I am suspicious about but did not play with is a red/white round sticker (which looks like it is hiding a button) under the battery (upper left corner).
Anyone know what that is, or is there a way to do a harder reset? Taking the battery out for a few days did not help either.
Because flash memory actually needs erasing rather than just resetting I doubt it is possible to clear it with a simple button press. It may be you can do a normal hard reset and hold down a button to bypass loading data from the flash then format it. But I've no idea really.
Jamie
Re-flash the ROM?
uuummm some where in this forum i read that if you have wm2005 and go to boot loader mode you get an option over there to clear the cache or memory something like that, and that would give you a clean installation.....
haven't tried it though.....and i doubt i would get such an option in wm2003se, also i have a similar problem i did a complete flash reinstallation of rom to my device and after the installation i opened windows media player (wasnt the first thing i opened, but didnt copy any files)and guess what....i had a song available over there..... which i could actually play and it did....i checked the location of the file and it was somewhere in my device or documents dont quite remember i did a hard reset again and same issue....
after that i have'nt tried anything the rom is same i just deleted the folder manually but i would also like to know how to TOTALLLLLLY ERASE ALL DATA from the device and clean install everything
regards
on the XDA II and WM5 you hold down the buttons to resent stage then i gives you three options. One of these I am sure clears the phone
I hard reset my Universal several times (well I think I did at least)
Press the soft reset plus the two "-" buttons and you will have a white screen asking if you want to put back your HTC back factory default
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
i tried some of them according to herein, but some of them were not function.
http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
there's a little icon called "clear storage" which brings your settings to the factory's default. what's wrong with it?
i'm stuck too in bootloader with my mda pro
atekant said:
Unfortunately that standard hard reset, doesn't do it. I am still stuck at reboot, and the radio rom version shows the attempted upgrade version (01) that started the problem in the first place.
Click to expand...
Click to collapse
This may be too late, but there's no way to do any sort of a reset to revert back to a previous ROM... the only thing you can do is reflash the earlier ROM.
Brett
ok ... now the final BIG request ... who can give us an update that works. the patched Maupgradeut_noid is not working with the latest upgrade.
thanks.
To revert back to clean copy of OS (i.e newly installed OS)
Hi,
Just to share with you my experience in reverting my phone to its original OS condition. Before that, just to give you guys some background.
1. Upgraded from PPC2003 to WM5
2. Tried install some patch to enable file transfer (OBEX) in BT
3. Suddenly, the phone screen gone missing. Phone shows No Signal. Cannot receive call.
3a. Did a OS reflash again, but still does not solve the problem.
4. **Panic for a moment **
5. Looked thro Program Files, and seems like some appln i installed were not erased despite doing a hard reset. So, i guess the hard reset doesnt erase some portion of the memory
6. Googled for a solution, but most said do hard reset
7. Went back xda-developers.com site to look for solution
8. Finally found a method. see http://forum.xda-developers.com/showpost.php?p=1164331 to do a format on the memory
Now, my phone is working fine. The phone screen is back and it shows my telco name, and can receive call
Hope this helps.
Rgds,
Choon
you're in the wrong forum mate
Hi Guys,
Well yesterday the Battery on my 9100 went flat this has happened before and I just charge it back up and its fine.. But this time I incurred Data Loss
Went to turn it back on and it locks on the Boot screen where its states the GSM etc.. Have gone through the usual key press to format and I keep reciving format failed
Any help would be most appriciated
Get to the bootloader screen (multicolored) by turning device off - hold camera button and turn on. Sounds like you need to reflash you device with the same or updated rom - all the wizard roms are listed in the wiki - link is top left on your screen
ul, prehaps its cos your knees are too bendy?
Imp
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Droc said:
Ive tryed changing the rom to a newer version, but still no avail... still saying format failed.. Any more ideas before I have to send it back to Qtek... which I would really rather not do
Click to expand...
Click to collapse
Did you sort this out? I can get to the multicolored screen and flash my wizard but it never boots past the second splash screen. I think the extended rom is corrupted somehow and I need to clear it but hard reset just ends with format failed? Any ideas?
J
is there a way to do a full reset without going thu the contole pannel?
also a way to reboot, without the startup group running..
thanks
eaton
there is a way to perform a hard reset which will set your phone back to stocksettings. This will delet everything of your phone and completly install the rom from scratch.
while doing a soft reset hold the commbutton and the camerabutten when the phone is booting. if done correctly it will install the rom new and everything will be set back to stock.
Rebooting without the startup grp loading..
Go into explorer and rename the startup folder in \Windows to something else - (or move/delete the links therein)
Charlie Grillo
Jus got mine I swapped my SEw900 with it. I tried to hard reset, but only upto the 3 colored bars. Wiki forum says i need to press d-pad up but nothing happens. Pls give more instruction or link. have spent more than 2 hrs already using the search but cant find the right post. M in an internet cafe and cost more stying longer. tanx.
private:
What are you trying to do? Get your phone back to stock?
private_rehamer said:
Jus got mine I swapped my SEw900 with it. I tried to hard reset, but only upto the 3 colored bars. Wiki forum says i need to press d-pad up but nothing happens. Pls give more instruction or link. have spent more than 2 hrs already using the search but cant find the right post. M in an internet cafe and cost more stying longer. tanx.
Click to expand...
Click to collapse
The 3 colour bar is the bootloader mode. That is NOT hardreset. You ought to get away from that screen before you've done any damage Anyway, there is a standard way of hardreset your unit from the software. Go
Start->Settings->System(tab below)->Clear Storage
works for every WM5 devices.
OK I am stuck at the screen showing IPL SPL GSM and OS.
I was wanting to change the ROM so I used Resco backup and made a full backup.
Then I flashed back the original Rom for my Cingular 8125 / HTZ Wizard
Then I flashed to HTC Business Edition ROM CE OS 5.2.1622 Build 18128 AKU 4.4 http://forum.xda-developers.com/showthread.php?t=376667
Then ran my restore but since I forgot to put in my name and other personal info it said some stuff couldnt be restored so I Put in all my info and then did the restore again and it said it was complete and needed to soft reset so I said ok and now Im stuck at the boot screen like I said.
Since Im at this spot active sync wont connect and I cant reflash that way.
any help or ideas would be appreciated.
Cheers,
Chris
I am sort of in the same boat, got the wizard flash with buttons image, but now it won't connect via activesync, hopefully we will both get an answer.
cholubaz,
I got my problem solved by ....
1) doing a hard reset on my phone
2) un-installing active sync AND deleting the active sync folder then re-installing a fresh copy
I wanted to pull what little hair out that I have left, but it all came out good.
I fixed mine too just a few min ago
Mine wouldnt even hard reset. Holding the Power button down did nothing no matter how long I held it down.
I took the battery out and put it back in after a few min to a few hours and still it would only boot to the same screen I mentioned.
What I found out was that if I held the camera button in and then turned on the phone I was able to get in to boot loader mode and then I was able to reflash to a new ROM.
So Im back in business now
Cheers,
Chris
Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!
eyej said:
Hi!
I`m totally new to this so i would like to ask for a help! I have Qtek s110, and i was reading about updating the ROM and that kind of things, trying to get know better the device.
On http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i have read that if you press Camera + Power and Soft Reset, you will enter into the bootloader mode. I wanted to see that mode, and pressed that. I got some message - word and some number and nothing happend (not error message but i cannot remember exactly the word and the nubmer..like some version number).
Then i have restarted the device so i could use it again and when the device finished the boot, i had to calibrate the screen, and things like that, like on the first boot of device (the programs where installing). After that i lost all of my personal informations, contacts, programs!!! PLEASE HELP if there is any help!
Of course, i didnt make any ROM backups! Is there any way to get my data back!? On my storage card i saw some folders that i didnt make myself. Some WMDRM with some .hds file and some 08071200001 empty folder!
Please help!
P.S. Why the hack that guy didnt said that button sequence is hard reset of the device!?? DAMN!
Sorry, but i`m really pissed! I will kill somebody now!
Click to expand...
Click to collapse
Hi there
There are no way to restore the data from ram since you hard reset your device. The big lost is contact book and sms message. You can try to copy the contact from sim to phone if it is exist in Sim card.
Good luck
try removing the battery n keep it like that for about 10 hrs.. n then put it back on n start the ppc..see if it helps
..n if it doesn't do not worry, ur fone aint dead yet....u'd have to go thru the hard way then