Hello,
Thisis the first time i put a message on XDA developers.
MY htc hd2 does not boot at all. The only screen is a white screen with the HTC logo. When i boot wiyh the volume button. I get a red, green,blue and white
with rthe message
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
and on the white part USB.
Who can help me
boestaman said:
Hello,
Thisis the first time i put a message on XDA developers.
MY htc hd2 does not boot at all. The only screen is a white screen with the HTC logo. When i boot wiyh the volume button. I get a red, green,blue and white
with rthe message
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
and on the white part USB.
Who can help me
Click to expand...
Click to collapse
kinda sounds like it got task29'd or something. Did you flash anything? Obviously you or someone else flashed HSPL at some point.
if it is tmobile USA version downlod from tmobile support. If it is any other version download from HTC support.
just get to that tri color screen again and run the RUU
orangekid said:
kinda sounds like it got task29'd or something. Did you flash anything? Obviously you or someone else flashed HSPL at some point.
if it is tmobile USA version downlod from tmobile support. If it is any other version download from HTC support.
just get to that tri color screen again and run the RUU
Click to expand...
Click to collapse
PB81100 is regular/European HD2.
T-Mobile US version is PB81120.
Telstra/Asia Pacific version is PB81110.
HX stands for Hynix memory chipset.
SS stand for Samsung memory chipset.
@ boestaman: For flashing a new ROM, have a look on this thread: http://forum.xda-developers.com/showthread.php?t=609477. It's a tutorial by mskip.
Related
I bought one of these in China. Not a Chinese one, an actual T-Mobile USA one (much cheaper). The current ROM is in Chinese, and everytime it boots up it has a xda-china logo on the start-up screen, so I'm guessing it's a custom job.
Either way, I want to flash it to an English custom ROM, and I won't have a problem following your excellent tutorials. Except, I worry if it's already been flashed with a custom rom then it wall already have HSPL. Is there a way I can check this, and if not, is anything bad likely to happen by attempting to flash it if it is already on the phone?
Thanks for any help.
Boot into bootloader and check to see what is listed there. To get into bootloader: turn the phone off, then hold volume down+power.
Look forward to your response.
~Jasecloud4
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
boneycork said:
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
Click to expand...
Click to collapse
It seems to have HSPl installed already although not the latest one.
You shall start flashing custom ROMs straight away
If possible, update the HSPL to 2.08HSPL.
If that just means following the HSPL tutorial I'll do that now.
Thanks for everything.
I have purchased HTC HD2 stuck in boot screen. Only white screen with HTC logo (no red letters with spl etc.)
Now i want to try flash it with stock rom from SD card but i do not now what rom to flash.
Is there a way to identify what is stock rom for my device.
I can enter in bootrom.
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Serial on device starts with HT03CNW....
Please help.
well it doesn't really matter what's on there already if its not booting, just flash any stock rom too check it actually works them change if you need to.
if its a tmous then make sure you flash a compatible stock rom.
if its a branded device then you may find some roms wont flash and you ned to "goldcard" it.
Flash OK, HD2 still stuck in boot screen
Hello,
I have flashed HD2 with RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.
After starting flash radio was flashed, then flash restarted hd2 and then started from begining and everithing flashed OK. i restarted hd2 but status remained the same.
It booted in white screen with HTC logo but there were no red leters in lower part of screen.
Also hd2 after HTC logo vibrated six times. I left phone in that state for 20 minutes, but nothing hapened.
What to do??
In bootloader now:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Any suggestions??
not sure, sorry.
im not that clued up on flashing issues, someone will have an answer for you though...
It sounds as though it may be a operator locked phone and it won't upgrade to a HTC stock ROM.
Where and how did you download the 3.14 ROM?
Any info you can tell us about the phone, ie USA or International, locked to an operator or SIM free?
I downloaded 3.14 from htc.nl site. I wrote serial and it permited me to download fw.
I purchased phone on eBay from guy in Netherlands. He stated that phone is not locked. The rest i do not know.
Yesterday i downgraded spl to 1.42 with sspl and then instaled HSPL 2.
I upgraded to WWE 1.48 but status remain the same.
Also i tryed with mtty and task 28 and task 29 but that also did not change status.
Thanks,
D
I left a thread about this in the android section but now I realize that this is probably the better place to do it (I need to send my phone back and get a new one on warranty):
Can any one tell me is this the stock info on a t-mobile htc hd2 stock:
on the boot (three color red green and blue) screen it says:
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
and on the ohter boot screen with the three numbers it says
R 2.15.50.14
G 15.42.50.11u
D 3.14.04666 8g
Will they be able to tell I messed with the phone given this info? In other words can I get my warranty with this?
Thanks in advance
Hi, I just got a new HD2 (after I thrashed my first one). I've been fixing some other peeps phones too, so I know all about the flashing procedure.
I've installed HSPL and a new radio onto the phone, but when I enter the bootloader screen all it shows is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
Not cotulla or anything. Any ideas about what's wrong?
So I definitely bricked my phone. Has to be. I try to use Task29 to start from scratch, but when "htc" pops up and has the bar of percentage, it just stays on 0%. No matter what I do. I do have Maglar (i think thats it) but when I boot up into Maglar it says
PB81120 HX-B3
SPL-2.08.0000 8G XE
MICROP(LED) 0x05
MICROP(TOUCH) 0x40
HELP.
See if you can get into bootloader mode, (by holding volume and down when device is turned off.) If you get into the tri colour screen its not bricked. Install hspl, task 29, than magdlr and u should be good to go. Good luck
Sent from my Desire HD using XDA App