So I definitely bricked my phone. Has to be. I try to use Task29 to start from scratch, but when "htc" pops up and has the bar of percentage, it just stays on 0%. No matter what I do. I do have Maglar (i think thats it) but when I boot up into Maglar it says
PB81120 HX-B3
SPL-2.08.0000 8G XE
MICROP(LED) 0x05
MICROP(TOUCH) 0x40
HELP.
See if you can get into bootloader mode, (by holding volume and down when device is turned off.) If you get into the tri colour screen its not bricked. Install hspl, task 29, than magdlr and u should be good to go. Good luck
Sent from my Desire HD using XDA App
Related
Guys,
I think I broke my phone. Rather, just broke.
I tried to fix the memory. I went to the extreme measure - use of tools mtty.
While using the tools I have turned off the light.
Now the phone in bootloader shows
aaaaaaa HX-BC
SPL-1.66.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
When I insert a USB flash drive with the firmware, it will first moment it loads and then it starts to crawl. A red 0058002
In the OS it is not included. Shows the RGD, but the download does not go.
After the computer is not sewn, falling on 1%
I got my new phone but can't seem to properly HSPL2 it installs fine but then restarts on red green blue screen with the standard startup.
PB81100 SS-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I tried flashing via usb but no love any ideas?
I can hear the napalm getting loaded and burners turning on but I can't find any device and I am flying to Vegas tomorrow so need to get this installed ASAP
Thanks
no need for hspl 1-2 or 3 , just use sspl and flash your rom
Just sits at 0% on the update!
I've gone from the best phone in the world to the worst
Can you boot the phone on into BootLoader mode, then plug it into the computer.
Run HSPL2, select the version of HSPL you want.
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
mimmoc10 said:
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
Click to expand...
Click to collapse
THIS IS CRAZY WHY YOU DOUBLE POST ?????
I am new to all this and I have done some searches, just not sure what everything is all the time. So here is my situation. I have an activation code everything was working great other than in call volume, ringer volume and alarm volume. Some reception issues as well but i don't know if that is related. I have a real hard time getting into the screen to flash by holding volume down button and green button. 98% of the time it won't work. now i have the schubert flash. Not sure what the advantages of this one is but my live services do not work. I get the check back message like i did before i had an activation code. So what would be the best ROM that would take care of my volume issues(which i fixed with registry, IDK why i messed with it) and give me live services?
When i get int 4 color screen when i hold down and shut the phone off: my phone reads:
PB8110 HX-B3
SPL-2.08 HSPL 8G XE
0x05
hspl 0X50
When i do it from turning it on it reads:
LEO1000 HX-B3 (2k)
NSPL0.96.255.0
MicroP(LED) 0x05
MicroP(touch) NA
SD NONE
Partition INFO-v211v413
Maybe this can help with my problems?
Thanks in advance
Sir,
I have HTC HD2 hang on HTC logo. When we press - Volume + power button it shows:
PB8100 HX-BX
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X40
I tried it to hard reset, but same. No use of hard reset.
Please reply thank you.
Firstly...i believe u try to flash it to android rom
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio
2. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR
3. MAGLDR 1.13 package
For greater explaination...please read completely without skip any step from this tred
http://forum.xda-developers.com/showthread.php?t=893948
Did you try to update your phone????
Sent from my HTC HD2 using XDA App
task29, wipe all cashes & use more stable ROM
i have hd2 hang at HTC logo without progress bar under.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
how can repair it?