Guys,
I think I broke my phone. Rather, just broke.
I tried to fix the memory. I went to the extreme measure - use of tools mtty.
While using the tools I have turned off the light.
Now the phone in bootloader shows
aaaaaaa HX-BC
SPL-1.66.0000 XE
MicroP (LED) 0x05
MicroP (Touch) 0x50
When I insert a USB flash drive with the firmware, it will first moment it loads and then it starts to crawl. A red 0058002
In the OS it is not included. Shows the RGD, but the download does not go.
After the computer is not sewn, falling on 1%
Related
I got my new phone but can't seem to properly HSPL2 it installs fine but then restarts on red green blue screen with the standard startup.
PB81100 SS-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I tried flashing via usb but no love any ideas?
I can hear the napalm getting loaded and burners turning on but I can't find any device and I am flying to Vegas tomorrow so need to get this installed ASAP
Thanks
no need for hspl 1-2 or 3 , just use sspl and flash your rom
Just sits at 0% on the update!
I've gone from the best phone in the world to the worst
Can you boot the phone on into BootLoader mode, then plug it into the computer.
Run HSPL2, select the version of HSPL you want.
My HTC Hd2 keeps rebooting
PB81100 HX-BC
SPL-2.08.HSLP 8G XE
0x05
CotullaHSPL 0x50
I did everything as it said on the Guide. tried windows phone 7 an android nun of them worked!!!!! now when i flash back a normal rom the phone vibrates like 5 times an stick at loading. sometimes when i hold down the power button it comes on an when i use the phone to play a video or sound it cuts off someone please help!!!!!!!!
also i use HSLP3 an radio 2.15.50.14 still not working!!!!
Do this http://forum.xda-developers.com/showthread.php?t=918698, then flash yor stock rom. You should be able to download stock rom from HTC web site.
Hi, I just got a new HD2 (after I thrashed my first one). I've been fixing some other peeps phones too, so I know all about the flashing procedure.
I've installed HSPL and a new radio onto the phone, but when I enter the bootloader screen all it shows is:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
Not cotulla or anything. Any ideas about what's wrong?
So I definitely bricked my phone. Has to be. I try to use Task29 to start from scratch, but when "htc" pops up and has the bar of percentage, it just stays on 0%. No matter what I do. I do have Maglar (i think thats it) but when I boot up into Maglar it says
PB81120 HX-B3
SPL-2.08.0000 8G XE
MICROP(LED) 0x05
MICROP(TOUCH) 0x40
HELP.
See if you can get into bootloader mode, (by holding volume and down when device is turned off.) If you get into the tri colour screen its not bricked. Install hspl, task 29, than magdlr and u should be good to go. Good luck
Sent from my Desire HD using XDA App
Hello,
I recently got my hands on an HD2, which seems to be radio bricked.
If I turn it on, I get a lovely white screen. The rgb bootloader still shows up, showing:
PB8110 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
The device is still recognized through USB, but the previous owner tried reflashing a radio which always stops after a short while.
I was wondering if there's any readable jtag pinout available somewhere, and what I might do to reflash the radio so it actually becomes usable again?
Kind regards
Update: doing a stupid RUU from the rgb bootloader turned it back in action. I'll return it to it's owner, he can decide what he wants to do with it