I bought one of these in China. Not a Chinese one, an actual T-Mobile USA one (much cheaper). The current ROM is in Chinese, and everytime it boots up it has a xda-china logo on the start-up screen, so I'm guessing it's a custom job.
Either way, I want to flash it to an English custom ROM, and I won't have a problem following your excellent tutorials. Except, I worry if it's already been flashed with a custom rom then it wall already have HSPL. Is there a way I can check this, and if not, is anything bad likely to happen by attempting to flash it if it is already on the phone?
Thanks for any help.
Boot into bootloader and check to see what is listed there. To get into bootloader: turn the phone off, then hold volume down+power.
Look forward to your response.
~Jasecloud4
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
boneycork said:
Well well,
PB81*** SS-B3
SPL-2.00HSPL 8G XE
0x05
CotullaHSPL 0x50
I guess that means I'm good to go then?
Thanks very much!
Click to expand...
Click to collapse
It seems to have HSPl installed already although not the latest one.
You shall start flashing custom ROMs straight away
If possible, update the HSPL to 2.08HSPL.
If that just means following the HSPL tutorial I'll do that now.
Thanks for everything.
Related
I have absolutely no idea when it comes to modding phones, but I want my HD2 to be as good as it can. I started up my phone and held down the volume button and here's what it says:
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I don't know what any of this means......can I get some help?!
Fyi, this is a tmobile us device
Franchiselocs said:
I have absolutely no idea when it comes to modding phones, but I want my HD2 to be as good as it can. I started up my phone and held down the volume button and here's what it says:
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I don't know what any of this means......can I get some help?!
Click to expand...
Click to collapse
samsamuel said:
amazing, the same question gets asked, and answered two or three times every day for weeks and not one ofthem ever finds the previous questioners threads.
downgrade to ROM 2.10.0 to give you spl 2.08.0000 and then hspl1024(I'm my sig) will work.
better still go find the specific t mobile us section, where every fourth post is either, this question or the answer to this question.
Click to expand...
Click to collapse
there are already some similar threads.
@mod/admin:
please close this thread.
You are posting in the wrong place. Check this out for HSPL http://forum.xda-developers.com/showthread.php?t=653614 this needs to be done first then flash desired rom/radio. You should be careful which radio and rom you use as incorrect radio flash can brick your device and not all roms are tmous compatible. Try posting any further questions on this topic here: http://forum.xda-developers.com/forumdisplay.php?f= as this thread will be closed by admin.
My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.
did you just flash a cooked rom and haven't yet changed the radio?
probably. ive no idea what to do know to be honest ive given it to repair they said the main board needs to be changed but i dont think its a hardware problem. could u tell me what to do. step by step. i flashed a rom thats true but i havent flashed a radio before doing it.
calen8 said:
My phone is stuck at the opening white screen. HTC writing wont come up and it wont open. i can go into the bootloader. i guess i did something wrong while flashing a rom. can u help me please.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
this writes in the boot screen.
Click to expand...
Click to collapse
I think you forgot to flash Radio ROM - look into thread of the ROM you flashed, there must be info about radios which are "approved"
thing is i dont know which rom is flashed right now and ive no idea about the radio also.
calen8 said:
thing is i dont know which rom is flashed right now and ive no idea about the radio also.
Click to expand...
Click to collapse
First of all - if you want to do something - read first and gather some info, otherwise you'll have problems.
And if the problem really is with radio, then try THIS first, it should help
just flash a high version radio, which should work regardless of what rom is there.
2.12.50.x or 2.10.50, one of them.
I am flashing the radio from sd and it says
00018003
LEOIMG.nhb - FAIL
Radio - Fail
Update Terminate
Update fail
i am no expert but perhaps try following this method picking a rom you like and also an exceptable radio. good luck
http://forum.xda-developers.com/showpost.php?p=6933055&postcount=14111
try flashing a different rom and see what happens
calen8 said:
ive given it to repair they said the main board needs to be changed
Click to expand...
Click to collapse
oh right its been back to service and got refused,
run hspl2,
choose a stock spl (so 1.66.0000 for a normal hd2 or hspl3 and choose 2.08.0000 for a tmous phone,) and send it back again.
hspl wont change the version =(
oh, well all i can suggest then is you try hspl2, ever option, and hspl3, every option, , maybe one of them can trigger the spl to change.
wont work =(
Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks
mobiler said:
Guys,
Help me out ASAP please.
I have an HD2 which screen isn't working and need to give for repair.
The problem is I already flashed Energy ROM and now I need to revert back to stock ROM.
I have reflashed my drive to shipped ROM, but when I go to the boot loader (Vol down power) I get the following:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
I don't think that is the stock HSPL, or whatever its name is. How do I get my device back to stock situation??? I must give the device tomorrow for repair so I really don't have any time. Have to do it ASAP.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=609477
Check the link above, and read.
run hspl2 and choose 1.42.0000
That's odd, coz when you flash a stock ROM via SD-Card it practically overwrites everything in the cellphone (including SPL, Radio, bootscreen) to stock values..
Anyway in case you flashed the stock ROM using the customruu utility, just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.
MartinXDA said:
just launch hspl3 again---> select SPL 1.42.0000 from the drop down list----> flash that and you should be good to go.
Click to expand...
Click to collapse
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.
samsamuel said:
hspl2, , ,, hspl3 doesnt have 1.42.0000 as an option.
Click to expand...
Click to collapse
yeah right..sorry 'bout that.
Thanks. You guys are great.
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.
you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right
Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.
This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG
Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.
Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power
This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..
I'm looking for some HD2 stock ROM for WWE and singapore ROM but most of the links are dead. Anyone still have the valid links?
Try here
http://forum.xda-developers.com/showthread.php?t=623283
orangekid said:
Try here
http://forum.xda-developers.com/showthread.php?t=623283
Click to expand...
Click to collapse
If not usefull, you may try here:
http://shipped-roms.com/index.php?category=windows mobile&model=Leo.
stock rom
Can someone help me please. I need a stock rom for my hd2 but I dont know the exact one for it. It is PB81100 with IMEI: 352666048914537.
I got it bricked. When i try to power on, it only vibrates without showing anything on screen and when I boot to the 3-color stage, i cannot flash task 29 because it hangs at 0%.
It shows PB8100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Can anyone please help me on what to do?
try an energy custom wm6.5 rom flashed via usb cable.
what colour are the call & end keys ? very possible it has serious hardware fault or requires jtagging due to wrong rom/radio flash ...