Hi every one.
I've done a quick search on the internet about motorola's dev phone. I only found someone denying the exitence of dev phone for the M2 (on motorola dev's site.).
So, where does the dev phones running GB comes from?
One of my theorie :
Can a key combination on boot turn the phone into dev mode? (In fact, unlock it? )
I've already tested some :
The well know bootloader with the volume key.
The X key on the keyboard for the recovery mode.
The search key on the keyboard seems to have no effects, so the alt key.
Do you know other key combination?
sent from some argent2stone MM2
they pressed both the volume keys to get to fastboot mode
Related
Hi,
i have newly bought Micromax w900 phone,
i would like to know , how to enter in bootloader mode.
When i press & hold volume down + camera + power i get factory reset option on screen,
please help me to get this phone in bootloader mode, thanks.
It has following buttons:
volume up + volume down
talk key
menu key - it triggers start menu
end key
camera key
power key
Thanks.
off topic : how much the price of ur device ????
kadamsharad said:
Hi,
i have newly bought Micromax w900 phone,
i would like to know , how to enter in bootloader mode.
When i press & hold volume down + camera + power i get factory reset option on screen,
please help me to get this phone in bootloader mode, thanks.
It has following buttons:
volume up + volume down
talk key
menu key - it triggers start menu
end key
camera key
power key
Thanks.
Click to expand...
Click to collapse
its just camera and reset button for bootloader
You can also load the SPB phone plus, this would enable you to go to bootloader mode just by pressing a button!
enjoy
try the app in my signature
Question for wizards:
Is there any way to enter boot loader without volume keys?
Keys are defective.
Phone is stacked in windows screen and can not boot completely to use ActiveSync.
anyone please ?
search for this program''quick shutdown'' on this forum...it has the option to restart in boot mode
thanks for reply!
Problem is I can't access windows in my touch2. It is stacked in boot process.
Do you have any other suggestion? Some key sequence, other than vol down + pwr ?
this was my problem too. my volume buttons are not working. when i diassable my phone, volume buttons are cut from the board. so when the phone stucked at boot or something, i have to diassamble the phone then use right combination for volume button down(over the board, using a cable or something metal) + press end call button. then i can see bootloader.
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
The key combinations are different for every bootloader.
If you are rooted and you installed custom recovery menu then you have JB bootloader and the key combination specified by you should work.
But if you are on stock firmware (with stock recovery menu) then you have KK bootloader and the key combination is different:
dorimanx said:
With the Kitkat update the process has changed:
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
Click to expand...
Click to collapse
Do the instructions you said, but don't release volume, just release power button at LG logo and then press it again right away.
Sent from my LG-VS980 using XDA, powered by appyet.com
ornobohornish said:
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
Click to expand...
Click to collapse
that happened with me also, so here is what helped me.
hold power button and volume up button instead of volume down.
There are numerous ways to unbrick the phone, but the way which worked for me is as follows:
Please note that for this to potentially work, a recovery utility such as TWRP should already be present, which is usually the case if you've installed a custom-rom.
Master reset with hardware keys
Power off the device and ensure it is not connected to any USB cables.
At the same time, press and hold the following keys for 8 seconds:
Power key
Volume down key
When the LG Logo is displayed, release and then immediately re-hold the Power key.
When the 'FACTORY HARD RESET' screen displays, release the keys.
Press the Power key to reset or one of the Volume keys to cancel.
Press the Power key to confirm the reset. The reset will start immediately.
Hopefully the phone will go straight into TWRP, from there you can re-install a compatible kernel/bootloader/ROM etc to help unbrick your phone.
The above won't work in all cases, but it worked for me as I was unable to get into recovery until I did the above.
Hope I put this post into the right place and apologies if this has already been discussed in the past, the search facility did not really help me in my hour of need.
Peace
I tried to post this in the frenzied 6.0 thread, but I can't follow all the cross talk. If I have an unrooted, stock phone, can I flash the update .zip and upgrade? Can anyone point to the update.zip? I don't want to "sideload" or any of that, we're too close to the real release for me to jack with all that, just wanted to know if I could simply update from stock recovery and move on with life.
Thanks
I found the update zip... But I can't get commands to show in recovery... Do you know the button press to show the commands?
http://www.droid-life.com/2015/12/02/178604/
First comment has the zip dl
two_cents said:
I found the update zip... But I can't get commands to show in recovery... Do you know the button press to show the commands?
http://www.droid-life.com/2015/12/02/178604/
First comment has the zip dl
Click to expand...
Click to collapse
Recovery Mode Motorola Moto X Pure Edition
Turn off the device
Press and hold Volume Down key
While holding this key press Power Key and release all keys ( Boot Loader Mode )
In the Boot Loader Mode, Select Recovery using Volume Down key and Press Volume up key to confirm
Press and hold Power key when Android logo appears
Then Press Volume Up key and release to enter Recovery Mode
Use Volume keys to select Menu
Use Power key to Confirm
thanks... I guess I was pressing them at the same time... I just updated and everything went well... Did you get the zip?