Unfortunately isn't JVR, but... JVQ is now available on Kies for XEU product code!
Last modified: 2011-06-28, so I think this is the same JVQ that we already know.
I'm uploading it now, thanks for the info.
Edit: http://www.multiupload.com/IZ2B0N2TID
Please send me a link to flash i was looking for a gb stock might as well try this one
I don't think it is the jvq we all know. This one last modified 28.06.2011 and the one we know is on 10.06.2011
Has any body updated ti it yet through kids
maartenjanvdwielen said:
Please send me a link to flash i was looking for a gb stock might as well try this one
Click to expand...
Click to collapse
Link aded to the 2nd post.
I don't think it is the jvq we all know. This one last modified 28.06.2011 and the one we know is on 10.06.2011
Click to expand...
Click to collapse
The version that kei_kusanagi uploaded is the version JVQ we all know, cause the files in the .tar archive are all dated 10.06.2011 and one (modem.bin) from 09.06.2011
second that,
is this the same bulid date as leaked jvq
Just updated. Date 10 june 2011
so its the same date because i was going to put my phone back to jm1 then update it to jvq throught kies but if its the same theres no point in doing it
The cache.rfs is different, but i don't think that this fixes the bugs that we all know:
GPS not working at all for some people with JVQ modem. If you flash the JVO modem, it's working.
Auto brightness working only with a delay of ~15 seconds. For some ppl it does not work at all.
Phone app crash, if a call over Bluetooth was ended by the "other side". Phone needs to be restarted after this. Happens with or without custom kernels.
So why are Samsung putting out through Kies an older of Android verion JVQ when they have a newer one JVR?
Just put my phone back to jm1then went to update through kies was offerd as a update to jvp
SnoopyDog said:
The cache.rfs is different, but i don't think that this fixes the bugs that we all know:
GPS not working at all for some people with JVQ modem. If you flash the JVO modem, it's working.
Auto brightness working only with a delay of ~15 seconds. For some ppl it does not work at all.
Phone app crash, if a call over Bluetooth was ended by the "other side". Phone needs to be restarted after this. Happens with or without custom kernels.
Click to expand...
Click to collapse
cache.rfs is exact same as in darkys leak-push - same date/time and size
- gps is working as it should on stock system
- autobrighteness: (same)
sensor is checking every 4 seconds for lux change when screen on only - ok for me not much spam
it takes 2 seconds after registering change in lux to change brighteness - for me very good response time
Click to expand...
Click to collapse
if it is otherwise saay thanks to your kernel/theme developer for breaking it
- it is not so easy to trigger for everybody and in fact phone restarts the crashed modules in like 30 seconds or so
there are a lot more issues not fixed with jvq and fixed with jvr
Anyone got the "process com.android.phone has stopped unexpectedly" when ending a phone call yet or too early to tell dya think?
as it is the same files as in 'earlier jvq' the bug persist
Just updated from JVO to JVQ. Rooted with CF-Root-XX_UNK_JVQ-v3.7
Going to find jkays theme and get that back up and running.
got-petrol said:
Just put my phone back to jm1then went to update through kies was offerd as a update to jvp
Click to expand...
Click to collapse
has anyone else had this and can you confirm that is what you got. many thanks K
Related
JM6 was released over in the I9000 boards. I have it on my captivate right now. GPS seems better. it was the first thing i checked. Can't speak for any lag issues yet.
http://forum.xda-developers.com/showthread.php?t=763369
Edit: removing my steps... I think designgears quote below does a better job summarizing what to do. I don't want to confuse anyone.
from designgears
designgears said:
Download Unhelpful's Kernel:
http://forum.xda-developers.com/showthread.php?t=762171
Follow this to Flash JM6: (swap stock kernel for Unhelpful's, and firmware files in the OP)
http://forum.xda-developers.com/showthread.php?t=734871
Apply the update.zip
http://www.multiupload.com/8IYQ3VKHR0
Enjoy, there was no need for market acces, sideloading, vibrant fonts, blah blah... most of the tweaks are already enabled stock.
The screen has garbage on it for the first second when you turn on the phone, has something to do with JM6... nothing to worry about
Click to expand...
Click to collapse
These notes are for JM6 with unhelpful's kernel and designgears SRE. If you don't want super rooter simply do not do the last step with the update.zip. If you want stock kernel use the one found in link
here
instead of unhelpful's.
I would recommend using unhelpful's kernel and designgear's hacks.
Zilch25 said:
Ahh google voice search... long missing from international firmwares, I threw the APK in as my attachment, enjoy
Click to expand...
Click to collapse
Credits
richthofen for posting the JM6 release
unhelpful for his kernel - btw, you are very helpful
reaver117 for his directions on flashing JM5
designgears for getting superrooter on here so fast
Zilch25.. thanks for the google voice apk. Added it up here. Should be helpful
ace518 said:
JM6 was released over in the I9000 boards. I have it on my captivate right now. GPS seems better. it was the first thing i checked. Can't speak for any lag issues yet.
http://forum.xda-developers.com/showthread.php?t=763369
Steps I took
1. ODIN stock
2. PIT flash
3. Flashed the JM6 PDA, did not touch the modem from their release.
4. Then flashed a captivate kernel on top.
If I stay up any later tonight i'll keep testing, perhaps check quadrant. They didnt' seem to see any gains in that. But I am currently locked on between 4-8 satellites, from my apartment window on the ground floor, and its raining out. On a clear day i used to be lucky to lock 3. Definitely seems to be an improvement.
I'm going to flash the EPIC fix on top of this and see where that gets me.
Click to expand...
Click to collapse
checking a few things out on this, modem.bin for one... then checking out what gps settings they have changed.
Nice let us know how it goes
Sent from my SAMSUNG-SGH-I897 using XDA App
Well,The epic fix seems to put it at about the same. Again, this is quick testing, not driving... just within a few minutes. I've definitely made it up to seeing 10 or 11 since I put on the epic fix... normally I don't get above 5-7... and with the JM6 had seemed to cap out around 9. Doesn't seem to help locking any more though.
If anyone else has any observations feel free to chime in.
BTW, designgears... great work with the superrooter mod. I use it all the time.
Sounds like this might be better than either the JH2 or JH3
The Bishop said:
Sounds like this might be better than either the JH2 or JH3
Click to expand...
Click to collapse
Seems to be so far. I really hope so. Now if I'm running JM6, all I can hope is that a samset gets built on it. I do rather like those ROMs
Just ran quadrant. No lag fix on it got 927. Using unhelpfuls kernel.
ace518 said:
Just ran quadrant. No lag fix on it got 927. Using unhelpfuls kernel.
Click to expand...
Click to collapse
927 with a 1.2 OC? That doesn't sound so good.....or was it set at 1ghz?
Clienterror said:
927 with a 1.2 OC? That doesn't sound so good.....or was it set at 1ghz?
Click to expand...
Click to collapse
No OC... didn't take the time to do that. Just stating i wasn't using the stock kernel.
Oh man, SuperRooterExtreme is getting ported to this!!
designgears said:
Oh man, SuperRooterExtreme is getting ported to this!!
Click to expand...
Click to collapse
Oh Oh here we go again.....
ace518 said:
No OC... didn't take the time to do that. Just stating i wasn't using the stock kernel.
Click to expand...
Click to collapse
OH ok cool, thats not TOO bad a score on stock then.
designgears said:
Oh man, SuperRooterExtreme is getting ported to this!!
Click to expand...
Click to collapse
awesome man. Thats the news I wanted to hear. No need for a samset now.
Also, I just went into the service mode to see if playing with gps settings would do anything, good or bad... seems the supl.google.com is already set. And maybe I just havn't spent enough time in those menus, but it seems like there are more options as well.
This rom is pretty good.
Which CSC file did you use? I'm going to try to get this flashed tonight. I want to make sure I'm following you though.
You flashed back to stock JF6 using Odin.
Then you used Odin to flash JM6 and a CSC file (which?) but no modem file. (How do I make sure I'm not flashing a modem?)
Then you flashed unhelpful's kernel on top (is there any way to get/use a stock kernel?)
Sorry for all the questions. This isn't my first time flashing a ROM, but it is my first time flashing seperate parts in ODIN like this so please pardon the ignorance.
edit* I would assume to not flash a modem, I would just leave the modem slot empty, but I just wanted to make sure.
The modem file is separate from the code file.
Reaver117's original thread on flashing JM5 is what I used as a guide
http://forum.xda-developers.com/showthread.php?t=734871
I have actually tried a few of the CSC files they posted. They all seem to be the same. I think i've flashed my phone over a dozen times tonight just seeing what works.
EDIT2: I personally like the OXA *Multi CSC* (for France, Germany, Italy, Poland, UK, UK & Ireland) as I don't need to see russian every time i boot my phone until it reads the sim card.
EDIT: OT, and that be post 30... no longer have to see junior member
SuperRooterExtreme is now ported!!
designgears said:
SuperRooterExtreme is now ported!!
Click to expand...
Click to collapse
Glad i stayed up.
Download Unhelpful's Kernel:
http://forum.xda-developers.com/showthread.php?t=762171
Follow this to Flash JM6: (swap stock kernel for Unhelpful's, and firmware files in the OP)
http://forum.xda-developers.com/showthread.php?t=734871
Apply the update.zip
http://www.multiupload.com/8IYQ3VKHR0
Enjoy, there was no need for market acces, sideloading, vibrant fonts, blah blah... most of the tweaks are already enabled stock.
The screen has garbage on it for the first second when you turn on the phone, has something to do with JM6... nothing to worry about
and super rooted
Backing up everything now. Can't wait to dig into this.
Yup, new ROM released
Reports please
http://www.multiupload.com/M83I6PHC07
jaju123 said:
Yup, new ROM released
Reports please
http://www.multiupload.com/M83I6PHC07
Click to expand...
Click to collapse
Damn beat me too it! I'll stick with JPY for the time being. It's took me ages to get my SGS exactly the way I like it.
Build date is actually 5 January 2011
Nicee
Can i use this rom to update every new firmware without kies now?
Sent from my GT-I9000 using XDA App
I'm not gonna follow this trend unless it has some major advantages...
Insanity dev thinks the same.
PaulForde said:
Damn beat me too it! I'll stick with JPY for the time being. It's took me ages to get my SGS exactly the way I like it.
Build date is actually 5 January 2011
Click to expand...
Click to collapse
I totally agree with you Paul. Except for the battery issues. But I guess I can live with it.
Sent from my GT-I9000 using XDA App
1.unrar I9000XWJS3
2.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
3.Select the PDA in Odin.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
I9000XWJS3|2.2.1|2010 January|Download link1 or link2
I noticed this on anysvc but wont go to it until all the extras i love on jpy move to it.
Darkyy said:
I'm not gonna follow this trend unless it has some major advantages...
Insanity dev thinks the same.
Click to expand...
Click to collapse
Trust me, you will.
Sent from my GT-I9000 using XDA App
what are the new additions from this firmware?
what is the country origin of this firmware?
or is it up to me to give it a whirl myself?
currently im a UK customer, using official Kies version of 2.2.1 JPY
Does any one know if the bluetooth disconnection issues that are on JPY are fixed in this rom ?
jaju123 said:
Yup, new ROM released
Reports please
http://www.multiupload.com/M83I6PHC07
Click to expand...
Click to collapse
Wake up http://forum.xda-developers.com/showthread.php?t=917256
Downloaded the new firmware, however rar file has a password. Does anyone know the password?
password is samfirmware.com
I with WJS3 now but I'm not sure it's good as battery life is terrible.Just to get the figure, GPS on for half an hour and battery drained 20% . There wasn't any new app installed with this new rom, no task killer installed but battery life is horrible. If someone found a solution to this battery issue, i'll be so greatful. By the way,Quadrant result is pretty much the same as 2.2 ( around 985 ). I'm not even sure i'll keep this rom for next 24 hours.
Hi guys
I am desperate for some help to get my GPS to lock since updating to gingerbread, i am on UK orange.
It just will not lock
Please help think i have reset a on GPS status app but still the same.
Thanks in advance.
Hk
When i flashed 2.3.4 for first time..best gps ever.then i flashed another kernel after sometimes and gps worst ever. I suggest you do a clean update again.
sarvesh29 said:
When i flashed 2.3.4 for first time..best gps ever.then i flashed another kernel after sometimes and gps worst ever. I suggest you do a clean update again.
Click to expand...
Click to collapse
Thing is mate i am on 2.3.3 gingerbread UK...
Hk
I am in Asia but I am using 2.3.3 XXJVO (Europe I think) and my GPS always locks in less than 20 secs with 7-9 satellites, accuracy 10-30m.
It used to be very bad with 2.2, almost never got locked
You can also try GPSFix on the Market, it's free
I also have much better results on Ginger then on Froyo.
However the thread that helped my GPS a lot on Froyo was this:
http://forum.xda-developers.com/showthread.php?t=881941
It improved GPS locking drastically.
Have you thought about changing the modem?, Is the most logical.
We propose the following if you have GB 2.3.3:
PDA: I9000XWJVH
Phone: I9000BUJV3 from BUJV9
CSC: I9000OXAJVK
KERNEL : speedmod-kernel-k15h-t4-300hz
And if you have GB 2.3.4:
PDA: I9000XXJVP
Phone: I9000XXJPY (Froyo 2.2.1)
CSC: I9000OXAJVP
KERNEL : Semaphore_kernel_JVP_1.2.0
Enjoy it.
1) you have not said what firmware youre on
2) since first jve modem from firstgb - jv1 there is no change in gps when you flash diff modems so THERE IS ABSOLUTLEY NO POINT in flashing back jpy modem
check my tiny mod link in signature
you will find there JVO JV9 and NEXUS gps files - try those
but first of all if you do not have gb flash one and best pick is 2.3.4 atm - that includes best gps atm
$omator said:
1) you have not said what firmware youre on
2) since first jve modem from firstgb - jv1 there is no change in gps when you flash diff modems so THERE IS ABSOLUTLEY NO POINT in flashing back jpy modem
check my tiny mod link in signature
you will find there JVO JV9 and NEXUS gps files - try those
but first of all if you do not have gb flash one and best pick is 2.3.4 atm - that includes best gps atm
Click to expand...
Click to collapse
To speak of a starkly should be tested before things, if the modem does not affect the GPS tell me what element controls the GPS then?.
Reasoning gives the solutions because of the things, because if not done so will only be lip service, empty words.
i am trembleing to hear what indepth test youve conducted =)
but first before you start, take the files you can flash with my cwm packages - as simple as that
if you know how to test you will se noticable changes when flashin JV9 JVO and NEXUS cwm file
JV9=JVP (modem.bin out of all GB's got NO IMPACT on performance) - GPS is VERY GOOD
I flashed my galaxy with the Darky 10.1 extreme rom and I get GPS lock almost instantly.
I also get good lock on when inside.
You should try flashing your phone with that, takes a little bit to do but well worth it.
Sent from my GT-I9000 using XDA App
Have you tried fasterfix off the market? I think it needs root though.
Sent from my GT-I9000 using XDA App
$omator said:
i am trembleing to hear what indepth test youve conducted =)
but first before you start, take the files you can flash with my cwm packages - as simple as that
if you know how to test you will se noticable changes when flashin JV9 JVO and NEXUS cwm file
JV9=JVP (modem.bin out of all GB's got NO IMPACT on performance) - GPS is VERY GOOD
Click to expand...
Click to collapse
No thanks I'm just a humble apprentice, you are the teacher demonstrates what you say with facts, not words, because we all know about, I'm here to learn from people as wise as you.
Guys I hope it helps some of you who wish to remain stock.
I have been using the JVT since it came out, have been quite pleased with performance and battery life, however the wifi disconnection bug has been a pain during my long skype conversations and the phone fc has also happened couple of times while it should not...
I have tried to solve this issue using stock combinations and after several trials, the solution for me was to have stock JVT + JVK modem. Phone works really good, no fc bug, no wifi disconnection, great battery life and performance. I am honestly totally pleased and will not flash my phone again until we have ICS bug free for our phones
I honestly hope it helps some and please ignore this message if you think stock sucks.
you need to flash jvt first, and after that flash jvk modem?
so should flash jvk modem on to existing jvt?
kicsihuszar said:
you need to flash jvt first, and after that flash jvk modem?
so should flash jvk modem on to existing jvt?
Click to expand...
Click to collapse
Yes, that is what the man is saying.
where can you get the JVK modem on its lonesome? extract if from a 3 file from samfirmwares?
You can get a jvk modem from various download sites, just do a Google search for jvk modem.
I've been trying this combo for a few days and it's rock steady.
still runing jpg.
kblo said:
Guys I hope it helps some of you who wish to remain stock.
I have been using the JVT since it came out, have been quite pleased with performance and battery life, however the wifi disconnection bug has been a pain during my long skype conversations and the phone fc has also happened couple of times while it should not...
I have tried to solve this issue using stock combinations and after several trials, the solution for me was to have stock JVT + JVK modem. Phone works really good, no fc bug, no wifi disconnection, great battery life and performance. I am honestly totally pleased and will not flash my phone again until we have ICS bug free for our phones
I honestly hope it helps some and please ignore this message if you think stock sucks.
Click to expand...
Click to collapse
Which CSC did you use? If it is the JVT stock, which CSC was it as there were two CSC files in the package. Thanks
kblo said:
Guys I hope it helps some of you who wish to remain stock.
I have been using the JVT since it came out, have been quite pleased with performance and battery life, however the wifi disconnection bug has been a pain during my long skype conversations and the phone fc has also happened couple of times while it should not...
I have tried to solve this issue using stock combinations and after several trials, the solution for me was to have stock JVT + JVK modem. Phone works really good, no fc bug, no wifi disconnection, great battery life and performance. I am honestly totally pleased and will not flash my phone again until we have ICS bug free for our phones
I honestly hope it helps some and please ignore this message if you think stock sucks.
Click to expand...
Click to collapse
Can you please specify exact version of modem? I guess stock JVT stands for XXJVT 2.3.5 rom and modem could be XWJVK or XXJVK. I m not sure. Links would be helpful as well.
Thanks
Nice, I've been waiting for such a combination without the wifi disconnection bug.
How did you flash the modem? First install jvt normally and then flash only the jvk modem? Ty
Damn... still have the wifi disconnection issue even with this combination
I thought modem had nothing to do with wifi (bug-wise)?
Sent from my GT-I9000 using XDA App
L0kiii said:
I thought modem had nothing to do with wifi (bug-wise)?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Modem had nothing to do with wifi, correct.
Sent from my GT-I9000 using Tapatalk
hackeron said:
Modem had nothing to do with wifi, correct.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Right, I also thought that, but when I read that I decides to try
hey guys,
quick question, A friend of mine has a i9000 tmobile branded (the idiot) but cant recieve update trough kies, wich firmware can flash on his device or is there no difference?
the 3 button combo works.
Tanks in advance
Stock jvq+ semaphore kernel. Roooooock solid,no fcs,no phone fc bug,wifi flawless. Trying to find a reason to update!
joey2cool2007 said:
where can you get the JVK modem on its lonesome? extract if from a 3 file from samfirmwares?
Click to expand...
Click to collapse
Search from the stock firmwares post.
samvdias said:
Which CSC did you use? If it is the JVT stock, which CSC was it as there were two CSC files in the package. Thanks
Click to expand...
Click to collapse
Hi, I use the bigger one, original from jvt
kotva531 said:
Can you please specify exact version of modem? I guess stock JVT stands for XXJVT 2.3.5 rom and modem could be XWJVK or XXJVK. I m not sure. Links would be helpful as well.
Thanks
Click to expand...
Click to collapse
Hi, I use xxjvk from android 2.3.3 NEE, can be found from stock firmwares thread.
Difusal said:
Damn... still have the wifi disconnection issue even with this combination
Click to expand...
Click to collapse
Hi, I am sorry to hear, somehow the wifi bug has not appeared for me after the flashing. I cannot explain why this is not happening now, but before it was coming always when I used skype, now it us not happening. Sorry I could not be much of a help! The phone fc bug also stopped for me after flashing xxjvk modem. I can only say that I'm probably a very lucky chap then.
jvk modem is good...but i didnot suffer any wifi disconnection with jvt modem ...i think problem is with jvs modem
Hi All
Im on Viirgin UK and using a shop unlocked SGS v2.3. 6 XXJVUstock, no mods or 3rd party add ons (Dec 2011). Since updating 4 weeks ago, my sgs has crashed occasionally, locked up, crashed on the Photo Editor and even on openning the camera itself, also, its reset after ending a phone call, so I uninstalled Fancy Widgets MIUI weather and clock and End Note,and a few apps but where Im finding it still crashing is after using the stock Music player for a few hours. The GS resets and re-boots.
So I downloaded Winamp and its still resetting after a few hours on Winamp as well.
I have re-downloaded, but not yet flashed back to 235 JVT, but I do like the new 236 UI and camera.
Any Advice..
Night
I had exactly the same problems like you.First on the begining it ran ok after a while problems came.I think this is because it's early beta leaked rom but i must say that all roms that i had on my sgs not a single one didn't work like my old swiss watch
So i feel like beta tester for android
Yeah me too.. Im thinking of going back to 235. I do like 236, but its just crashing on everything. Sept 235 seems to just handle anything, but not sure whats happening.
I think the OP for 236 did say it was a leaked rom, Oh well, not to worry.. I did see the ICS thread, looks interesting.. may try that, but Im more of a stability over speed kinda user.
Thanks for the reply ppavlovic.
Cheers
Night
If you want to stay on 2.3.6, flash the JW1 PDA instead.
It is currently the most stable stock ROM released for the SGS.
Thanks Black Rose. Is this the issue.. will that help the Media player crash and the random resets.
My SGS is my main Media, MP3 player, so I like it to be stable... Thanks
Night
I wonder what is the most stable,fast and non battery eater rom of all leakes roms until now?
NightOrchid said:
Thanks Black Rose. Is this the issue.. will that help the Media player crash and the random resets.
My SGS is my main Media, MP3 player, so I like it to be stable... Thanks
Night
Click to expand...
Click to collapse
I've never used the media player that long, so I can't comment on that.
I've never had a crash with the leaked or official versions of JW1 in the almost two months that i've been using it.
I do have an issue with bootloops if I leave wi-fi enabled when I turn the phone off, but I've only seen reports from myself and one other person about this.
ppavlovic said:
I wonder what is the most stable,fast and non battery eater rom of all leakes roms until now?
Click to expand...
Click to collapse
Im in UK on Virgin Mobile and The best one IMO ive ever flashed yet is XXJVT 2.3.5 (Sept 2011 Open Europe) with only 1 reset in the 3.5 months I used it. Also, this version comes with Daily Briefing, which is useful for me.
Give it a try, let me know how it goes..
Black Rose, will JW1 function on an Unlocked UK SGS.
Cheers
NightOrchid said:
Black Rose, will JW1 function on an Unlocked UK SGS.
Click to expand...
Click to collapse
There were two official releases of JW1 XEN(unbranded) and KPN (Netherlands).
I am running XEN on a locked Canadian SGS (gt-i9000m).
I've been on jw1 for a couple of months also and have had zero issues. No reboots no, nothing can't remember the last time my phone was off or had a force close.
JW1 + semaphore + DMore rom.
Phone running so good I can't be bothered to switch to ics.
Sent from my GT-I9000 using xda premium
i will give a try to both roms.Currently i installed the latest froyo from may 2011xwjsd because i had problems with exchange email in gb.I use 2 exc. accounts from 2 firms.On one is security that phone must be encrypted but when i choose to do so phone reboots it encrypts itself and falls into boot loop mode.I guess it encrypts the crucial boot files so it cannot start again And this is the issue in all GB roms for me.
Black Rose said:
If you want to stay on 2.3.6, flash the JW1 PDA instead.
It is currently the most stable stock ROM released for the SGS.
Click to expand...
Click to collapse
Ive only flashed stock roms before from the files from SamFirware, so can I check...
Ive decided to give 236 another go, but before i go ahead, can I just check.. In ODIN 185, I set:
JW1 Xen = PDA / CSC Multi OXAJVU = CSC / ModemXXJVU = Phone. So all im doing is swapping the stock CODE file for JW1 XEN.
As this is a complete upgrade from JVT do i need re-partition + PIT.
Im in UK on an unlocked SGS.
Thanks all
Night