Database Users

MAGLDR Problem

hi,
MAGLDR doesn't recognize my sd card . i can't use usb mass storage , AD SD => CWM . apparently all the roms i want are released az ZIPs ...
is there a fix for that ?

Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.

hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks

exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.

waspsl said:
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
Click to expand...
Click to collapse
Yes exactly thats what i m doing. But it passes to magldr. I even have reset from the red button at the back but no way to bootloader

@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?

MTN_HD2 said:
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
Click to expand...
Click to collapse
Yes, install the appropriate cwm partition by going to usb flasher and running daf.exe. Then the phone will reboot to magldr, select AD recovery and you can then flash zip roms or updates, backup etc etc etc.... I have a 512 device also, so no problems.
I guess one of the reasons for running recovery off NAND is that not all users could get the sd based recovery to work.

exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?

fastscorpion2010 said:
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
Click to expand...
Click to collapse
What hspl version and radio are you using? To use magldr you need 2.08.hspl and radio 2.08.50.xx or higher .50 radio
I'm not sure why it would hang on reflash to winmo, but let's try get to Android.

Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?

grisantycosme said:
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
Click to expand...
Click to collapse
you're using Stock SPL, you need Hard SPL (HSPL)

ClydeB1 said:
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
Click to expand...
Click to collapse
You...so...rock!
I've been getting utterly frustrated with watching Windows bars filling only halfway, but your solution worked like a charm!
:good: x many!

magldr problem
hi
i was instaling the magldr on my htc hd2, but during the instalation i realise that my VOLUME UP and DOWN buttons are broken and dont work...i have to choose some option in MAGLDR but i cant...so i'm stuck here, my phone boots only MAGLDR even when i restart the phone from the red button, or even when i pull out the batery...is there some option to turn off the magldr, without using the volume buttons? please help me..in the store workers tell me that they cant fix the broken volume buttons...and now i cant use my phone... cheers...

[q] blue screen flashes & freezing please help!

EDIT PLEASE READ THROUGH
Alright, I'm about to give up again. My phone.. I don't understand what the **** is wrong with it. I have uninstalled, task29ed, reinstalled magldr flashed with CWm uhhh.. all that stuff over and over and over and over again and it STILL freezes, flashes a blue screen, crashes, restarts, freezes all that stuff.
Right now the issues I have are :
-It crashes on the tri color screen when I plug the USB in.
-It stays at the "Stick Together Scren"
-It crashes when I get to MAGLDR (IF I get t MAGLDR)
So I can't really get anywhere with these reoccurring problems.
Right now I have
-2.08.HSPL
-Radio 2.15.50.40.
-Magldr V 1.13
And that's it. I have TMOUS HTC HD2
I'm trying to install D4RK MIUI v1.5 (1.6.24)
Yes, all my battery little prongs are straight
Yes, I format my SanDisk SD Card
Yes, I did everything I was supposed, followed every instruction to the T, and yet... still.
I'm sure it's not bricked.. It still turns on and stuff, but it just freezes and crashes CONSTANTLY.
PLEASE anyone that knows ANYTHING new I could do, or can direct somewhere. PLEASE. I really love this phone and the possibilities it holds, I don't want to use my stupid Samsung Galaxy S 4G. It's so slow xDD

Anyone have any suggestions..?

To help you everything you say have to be precise. Like is your ROM is it an android NAND and what's the name of it. To check turn off your phone, then turn it on, right from the start by press and hold the red button until you see MAGLDR 1.13 screen. If you see it then we can move to next confirmation steps like what's the name of your ROM. There is no way to fix any if you just give us a maybe. From MAGLDR, select power down, then wait a few second then power your device on and let it boot all the way into the ROM. When your ROM fully loaded, go into Settings/About phone/look under what's the Build number? What's the Android version? What's the Baseband version?

I have magldr 1.13
So I ended up getting a stupid samsung galaxy s xD
ANYWAY, the other day I charged up my old HTC HD2 and prior to ignoring it and letting it die, I removed android and magldr. But I wasn't able to remove HSPL because it wouldn't stay on long enough for me to do it.
And today when I thought it had "fixed itself". It was working completely fine, no freezing on WinMo. So I thought 'what the heck let's do it again!' so I followed the steps for flashing your first nand rom from mskip and I still get the same problems. The phone freezes, I leave it alone, try to press buttons, and it flashes a blue screen then reboots. Magldr doesn't load, I can still get into the tri color screen, I've tried to master reset it multiples of times.. I DUNNO WHAT TO DOOOOOO. And it seems like I'm the only one with this problem xD Please help!
HSPL
build number 2.29.405.5 CL293415 release-keys
android version 2.2
baseband version 15.42.50.11U_2.15.50.14
kernel version 2.6.32. 15-g66f6ed7-dirty
[email protected] #2
software number 2.29.405.5 CL293415 releas-keys
browser version WebKit 3.1

Viscix said:
EDIT : SO I THINK I JUST MADE IT WORSE
I just now did that task29 thing hoping that it'd wipe out everything. Now my phone is stuck on the "Stick Together" screen and just restarts and stays at said screen. UGHHGHGHGHGHGH... What a headache. Can someone PLEASE help?
Click to expand...
Click to collapse
Well of course it is, what do you expect, you have just wiped the entire nand.
You need to re-install MAGLDR, then the partition size you need for the rom you want, then copy the rom to your SD and flash with recovery. Get the HD2 NAND tools from the sticky thread in Android NAND forum, that will make process allot easier for you.
You should also properly format your sdcard with Panasonic SDFormatter (Full+Overwrite+size adjust). Then in recovery>advanced>sd partition (1GB+0MB swap) If you have a EU HD2 and need the extra data storage/rom requires it.

TheATHEiST said:
Well of course it is, what do you expect, you have just wiped the entire nand.
You need to re-install MAGLDR, then the partition size you need for the rom you want, then copy the rom to your SD and flash with recovery.
Get the HD2 NAND tools from the sticky thread in Android NAND forum, that will make process allot easier for you.
Click to expand...
Click to collapse
Could you be a little more specific....? ^^;
Like.. how do I flash with recovery.
What tools are you talking about, 'cause I downloaded the HD2 toolkit and have no idea on how to use it. Seemed simpler than I expected.

Viscix said:
Could you be a little more specific....? ^^;
Like.. how do I flash with recovery.
What tools are you talking about, 'cause I downloaded the HD2 toolkit and have no idea on how to use it. Seemed simpler than I expected.
Click to expand...
Click to collapse
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open HD2 Installer Toolkit:
Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Install HSPL 2.08 HSPL.
Wipe using Toolkit Task 29 (Enter bootloader:as above)
Flash radio...download HERE(Enter bootloader:as above)
Install MAGLDR using Toolkit (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
An alternative is KEVIN134's TOOLKIT (Don't forget to thank him).
This one is a good step by step guide for complete beginners.

malybru said:
Hi,
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open HD2 Installer Toolkit:
Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Install HSPL 2.08 HSPL.
Wipe using Toolkit Task 29 (Enter bootloader:as above)
Flash radio...download HERE(Enter bootloader:as above)
Install MAGLDR using Toolkit (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
An alternative is KEVIN134's TOOLKIT (Don't forget to thank him).
This one is a good step by step guide for complete beginners.
Click to expand...
Click to collapse
Hey! Thanks for replying! I figured it out on my own and have been installing roms through my SD card via Clockwork Mod. It works well for awhile, but I still have the same problem I started off with. The phone freezes and a blue screen flashes then restarts. Do you know why this is happening?

Viscix said:
Hey! Thanks for replying! I figured it out on my own and have been installing roms through my SD card via Clockwork Mod. It works well for awhile, but I still have the same problem I started off with. The phone freezes and a blue screen flashes then restarts. Do you know why this is happening?
Click to expand...
Click to collapse
Hi,
The only other thing I could think of was what TheATHEiST suggested:
"You should also properly format your sdcard with Panasonic SDFormatter (Full+Overwrite+size adjust). Then in recovery>advanced>sd partition (1GB+0MB swap) If you have a EU HD2 and need the extra data storage/rom requires it. "
Don't forget to back up your data.

malybru said:
Hi,
The only other thing I could think of was what TheATHEiST suggested:
"You should also properly format your sdcard with Panasonic SDFormatter (Full+Overwrite+size adjust). Then in recovery>advanced>sd partition (1GB+0MB swap) If you have a EU HD2 and need the extra data storage/rom requires it. "
Don't forget to back up your data.
Click to expand...
Click to collapse
So that should fix the freezing and restarting? I'll try it. thanks again!

Viscix said:
So that should fix the freezing and restarting? I'll try it. thanks again!
Click to expand...
Click to collapse
yes, formatting the sd card fixes a lot
use radio 2.15
and before flashing a rom, always wipe data/cache/dalvik cache

yz.hd said:
yes, formatting the sd card fixes a lot
use radio 2.15
and before flashing a rom, always wipe data/cache/dalvik cache
Click to expand...
Click to collapse
I did everything suggested and it still freezes. Any other options? And how do I check what radio ver I have? Because I think i already have 2.15.

Viscix said:
I did everything suggested and it still freezes. Any other options? And how do I check what radio ver I have? Because I think i already have 2.15.
Click to expand...
Click to collapse
Hi,
Settings>About phone>Software information>Baseband version.

malybru said:
Hi,
Settings>About phone>Software information>Baseband version.
Click to expand...
Click to collapse
Okay, but what about the freezing and the blue screen? How do I get rid of it?

Viscix said:
Okay, but what about the freezing and the blue screen? How do I get rid of it?
Click to expand...
Click to collapse
Hi,
Couple more questions.
What sd card are you using?(brand,class,size,etc.)
What ROM are you trying to install?

I have SanDisk micro SD adaptorfor my SanDisk 16 GB microSD there's also a number 2 in a circle at the top right and HC in the bottom right.
I'm trying to install D4RK MIUI v1.5 (1.6.24)

Viscix said:
I have SanDisk micro SD adaptorfor my SanDisk 16 GB microSD there's also a number 2 in a circle at the top right and HC in the bottom right.
I'm trying to install D4RK MIUI v1.5 (1.6.24)
Click to expand...
Click to collapse
Hi,
Sandisk is a good make of card which is Android friendly.
If you have formatted it as suggested above,that should not be the problem.
Did you follow my guide to the letter?
D4RK MIUI requires a 150MB CWM partition.Did you enter those figures in the KSUBEDI TOOLKIT?
Are you sure you downloaded the MAGLDR version of the ROM?

Yes, yes, yes and yes xD I'm just as stumped as you are.
Could the Sim card have anything to do with it?

Viscix said:
Yes, yes, yes and yes xD I'm just as stumped as you are.
Could the Sim card have anything to do with it?
Click to expand...
Click to collapse
Hi,
Last thought...
Are your battery pins all straight?

nothing to do with his sd card, task 29 will not help, fook all to do with battery pins ...yadda yadda yadda.
nand android on hd2 = freeze freeze freeze.

hd2 help

i have a hd2 thats booting directly to the sd, i hate it, its slow, it lags and im tried of it...
i want to do a nand install b/c ive seen them perform 10x better.
how can i do the nand install?
if i take the sd card out the phone just sits at amagldr v1.13 screen. i press the volume button down and it doesnt move... someone help me please

try this
http://forum.xda-developers.com/showthread.php?t=893948

not helping b/c for some reason i cant scroll with the volume buttons

if you leave the sd card in can you scroll up and down.dont you have to flash hspl 2.08 first to be able to have nand.im just asking these questions cause i dont know much about the dual booting,but i know a good amount about the nand type daf and cwm.

trmixing said:
i have a hd2 thats booting directly to the sd, i hate it, its slow, it lags and im tried of it...
i want to do a nand install b/c ive seen them perform 10x better.
how can i do the nand install?
if i take the sd card out the phone just sits at amagldr v1.13 screen. i press the volume button down and it doesnt move... someone help me please
Click to expand...
Click to collapse
To install Android to nand using MAGLDR 1.13 you have two choices to do this. You can do it the original way with a ROM that flashes via option #5 USB Flasher and a DAF installer utility. Or you can flash Clockwork Mod Recovery via option#5 USB Flasher and then booting ifnto CWM via option#8 AD Recovery. then using install zip from sdcard. You have to have a MAGLDR compatible ROM though, which is most ROM now anyway.
But as you can see you have to be abale to scroll with your volume up and down buttons to do any of this, so I really don't know what to tell you. I will wait for your next post before giving any further suggestions.

Help please! Update problem after installing MAGLDR V1.13

Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!

sofaford said:
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
Click to expand...
Click to collapse
Wrong forum, should be in the Q&A. You'd have thought it would be obvious, seeing as you're asking a QUESTION, but somehow people don't pick that up
Also, you really need to read more. There isn't any point in installing MAGLDR then Task29ing, in fact there is very little point in Task29ing at all unless you experience major problems with your phone. A simple data wipe (in CWM) and repartition has never failed me.

If you did a task 29 after doing the other steps first then you wiped everything back off. Install magldr again then CWM and then install your rom of choice.
Also for being a member since 2005 you should know not to EVER post a question in development.
Mods please move to Q&A
Sent from my Galaxy Nexus, T989, HD2, G2x or Touchpad.

moved

Sorry for posting it in the wrong forum.
Many thanks for the comments...I cannot install anything at present because once update process starts it times out at 0%. Task29 did not work either - it also gets stuck at 0%.
Only thing that works is Boot loader and USB mode.
As Boot loader is working I tried to install NAND Android following this instruction:
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
But DAF is giving this error back:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)

thats all old instructuions.
go get the nand toolkit, and also get hspl3
...
phone into bootloader (tri colour screen, not magldr)
connect usb
run hspl3
choose 2.08.hspl (don't assume its already 2.08.hspl, check it, hanging at 0% is often a sign of no hspl)
when reboots immediately go back into bootloader
*(* from here on you can do all this in the nand toolkit*)*
flash magldr
when it reboots enter magldr
(if phone hangs on a htc screen and doesn't show magldr, you need to flash radio 2.15.50)
phone into magldr
connect usb
choose 'usb flasher'
in toolkit select desired system partition size and cache size
when its finished
phone back into magldr
choose 'ad nand'
this starts cwm
(if you havent yet partitioned your sd card with an ext partitio, look ity up and do it now)
select 'install zip from sd'
select zip from sd
browse to where you dropped the rom.zip file onto your sd card.
when it reboots you're done, , alternatively it failed somewhere, , which step?
if you get apparent driver errors, theres a nice big button called drivers in the toolkit (i think?)

Many thanks that worked like clockwork

Stuck At 'Go Go Go' & "nand kernel open failed" Errors

Earlier today my custom ROM froze. I rebooted the phone by taking the battery out and the phone would only go as far as the Magldr screen where it says "Go Go Go", no matter how many times I tried, the ROM wouldn't boot.
So I wiped my phone with Task29 (even tried installing an original WM6.5 ROM), and tried to reinstall Magldr and a new ROM. However, after I run Task29 and Magldr and turn the phone on, only the white HTC screen displays. I could not get the phone to display the Magldr menu.
Finally after repeating the above a couple of times, I managed to get the Magldr menu to display, but once I install the CM Recovery and enter AD Recovery to install the new ROM, Magldr again gets stuck after displaying 'Go Go Go!'.
I also note that as the phone boots up into Magldr, one of the lines say "nand kernel open failed".
Any idea what is happening and why I cannot boot into Ad Recovery (or my ROM) and always get stuck on 'Go Go Go!'?

it could be a corrupted NAND ic?
have you tried to boot SD?

mengfei said:
it could be a corrupted NAND ic?
have you tried to boot SD?
Click to expand...
Click to collapse
A clean install of the original Windows Mobile 6.5 boots and works. How could I rectify a corrupted NAND in this case?

EViS said:
A clean install of the original Windows Mobile 6.5 boots and works. How could I rectify a corrupted NAND in this case?
Click to expand...
Click to collapse
if that is the case it seems like your nand is OK or there could be just soem bad blocks(i'm just guessing here)
how about giving this a try then run an SD version before going to NAND version
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Boot source > ad sd