Related
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
hi,
MAGLDR doesn't recognize my sd card . i can't use usb mass storage , AD SD => CWM . apparently all the roms i want are released az ZIPs ...
is there a fix for that ?
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
waspsl said:
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
Click to expand...
Click to collapse
Yes exactly thats what i m doing. But it passes to magldr. I even have reset from the red button at the back but no way to bootloader
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
MTN_HD2 said:
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
Click to expand...
Click to collapse
Yes, install the appropriate cwm partition by going to usb flasher and running daf.exe. Then the phone will reboot to magldr, select AD recovery and you can then flash zip roms or updates, backup etc etc etc.... I have a 512 device also, so no problems.
I guess one of the reasons for running recovery off NAND is that not all users could get the sd based recovery to work.
exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
fastscorpion2010 said:
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
Click to expand...
Click to collapse
What hspl version and radio are you using? To use magldr you need 2.08.hspl and radio 2.08.50.xx or higher .50 radio
I'm not sure why it would hang on reflash to winmo, but let's try get to Android.
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
grisantycosme said:
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
Click to expand...
Click to collapse
you're using Stock SPL, you need Hard SPL (HSPL)
ClydeB1 said:
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
Click to expand...
Click to collapse
You...so...rock!
I've been getting utterly frustrated with watching Windows bars filling only halfway, but your solution worked like a charm!
:good: x many!
magldr problem
hi
i was instaling the magldr on my htc hd2, but during the instalation i realise that my VOLUME UP and DOWN buttons are broken and dont work...i have to choose some option in MAGLDR but i cant...so i'm stuck here, my phone boots only MAGLDR even when i restart the phone from the red button, or even when i pull out the batery...is there some option to turn off the magldr, without using the volume buttons? please help me..in the store workers tell me that they cant fix the broken volume buttons...and now i cant use my phone... cheers...
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
sofaford said:
Hi, Tried installing my first Nexus ICS Android on HTC HD2
following instruction here http://forum.xda-developers.com/showthread.php?t=1434860
Got to the point where I got MAGLDR v1.13 installed and running.
Then found that I needed HD2 Android NAND Tool and Repartitioned System size to 200 Mb
using USB flasher mode on the MAGLDR.
Then NAND Tool suggested that running Wipe(taks 29) to be a good idea before attempting to install Android so I tried running this as well.
I got the phone into tri-colour USB mode and started wipe. USB mode disappeared replaced by HTC progress bar but it got stuck at 0% and timedout.
I tried recovering to HTC original WWE ROM but it also gets stuck at 0% progress.
Currently Bootloader starts and loads a options, I can also go into USB mode but nothing will start updating the phone it gets stuck at 0%.
I think what repartitioning created a problem but I am unsure how to recover it and need your help!
Click to expand...
Click to collapse
Wrong forum, should be in the Q&A. You'd have thought it would be obvious, seeing as you're asking a QUESTION, but somehow people don't pick that up
Also, you really need to read more. There isn't any point in installing MAGLDR then Task29ing, in fact there is very little point in Task29ing at all unless you experience major problems with your phone. A simple data wipe (in CWM) and repartition has never failed me.
If you did a task 29 after doing the other steps first then you wiped everything back off. Install magldr again then CWM and then install your rom of choice.
Also for being a member since 2005 you should know not to EVER post a question in development.
Mods please move to Q&A
Sent from my Galaxy Nexus, T989, HD2, G2x or Touchpad.
moved
Sorry for posting it in the wrong forum.
Many thanks for the comments...I cannot install anything at present because once update process starts it times out at 0%. Task29 did not work either - it also gets stuck at 0%.
Only thing that works is Boot loader and USB mode.
As Boot loader is working I tried to install NAND Android following this instruction:
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
But DAF is giving this error back:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
thats all old instructuions.
go get the nand toolkit, and also get hspl3
...
phone into bootloader (tri colour screen, not magldr)
connect usb
run hspl3
choose 2.08.hspl (don't assume its already 2.08.hspl, check it, hanging at 0% is often a sign of no hspl)
when reboots immediately go back into bootloader
*(* from here on you can do all this in the nand toolkit*)*
flash magldr
when it reboots enter magldr
(if phone hangs on a htc screen and doesn't show magldr, you need to flash radio 2.15.50)
phone into magldr
connect usb
choose 'usb flasher'
in toolkit select desired system partition size and cache size
when its finished
phone back into magldr
choose 'ad nand'
this starts cwm
(if you havent yet partitioned your sd card with an ext partitio, look ity up and do it now)
select 'install zip from sd'
select zip from sd
browse to where you dropped the rom.zip file onto your sd card.
when it reboots you're done, , alternatively it failed somewhere, , which step?
if you get apparent driver errors, theres a nice big button called drivers in the toolkit (i think?)
Many thanks that worked like clockwork
Hi,
I want to instal WP7 on my HTC HD2.
In the tutorial i use i should use the Rom update utility to get MAGLDR on my phone.
When i try to use this utility i don't get further than 0% and after some time i get a error (error 626)
What i did is:
- I reseted my HTC HD2.
- I started the Rom update utility. It says that i need a update from 1.66.404.1 to 2.00.000.0.
- So when i start this it will restart my phone and show me a progres bar.
This will stay on 0% and after 10 minutes the utility gives me a message that says:
You connection is lost(error 626). Than i need to "recover" my phone by taking the battery out and put in in again.
When i do this it wel restart my phone with the WM6.5 so nothing happend.
I tryed the following things:
- A different usb cable and usb port.
- redownload the Rom Update Utility from this site.
- Hard reset my phone.
Nothing happend a still geth the same error.
Does someone know how to fix this?
Or is there a defferent way to install WP7 on my HTC HD2.
Thanks,
Maarten
read tutorial from my signature
I will try that thanks.
I finished step 0.5 and 1.
But when I am at the line "When phone boot in MAGLDR use:"
I get stuck.
The MAGLDR is installed but when the phone restart i get stuck on the white HTC screen.
Any clou what i should do next?
if not boot, press and hold power button to start magldr....
I tryed it but it wont do anything else than go to the white boot sreen with the Green HTC logo.
I tryed to press the power button for a long time and while he is booting.
Butt notting more than te boot screen shows.
The only way to start the phone again is to remove the battery.
I can get in the "red-green-blue-white screen"
I already tryed to reinstall the magldr. But no luck.
And what do you meen with "in not boot"?
The only thing it does do is boot to this logo and that's it. So its always booting when i turn it on...
"if not boot to magldr"
which HSPL you have installed on device?
try install WM6.5 first then install magldr....
first time when phone boot after magldr flashed, must boot to magldr automatically
I have HSPL2.08
It doesn't start the magldr automatically.
Even if i hold the power button. It just starting with a white boot screen with HTC logo.
Don't know how to install wm6.5 again.
Please help. I would like to use my phone tomorow again.
Edit:
Maybe it's bricked...
boot to threecolor screen and flash WM6.5
Ok I flash back to WM6.5
What to do now?
Follow the instructions again i asume.
Anyway many thanks for your help!!!
yes, after flash, install magldr and continue...
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
you cant flash WP7 without magldr menu (setting options and enable USB flasher in magldr)...
yes this magldr is ok...
http://forum.xda-developers.com/showthread.php?t=893618
to be sure, which version of HD2 you have?
also check data in bootloader screen (threecolor)
Data in bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Version:
I know i don't have the t-mobile version.
HTC HD2 T8585
MasterMaarten said:
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
Click to expand...
Click to collapse
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
hjhjhj said:
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
Click to expand...
Click to collapse
I used the manual from dxdy:
STEP 0.5 - from same beginning, WP7 never or not installed on phone
- If needed (if Android NAND installed, or if any error during flash
process, erase NAND with Task29). Flashing WM6.5 not needed.
- if you have SIM locked phone and want unlock with code, you can this only in WM6.5
- insert formatted microSD card to FAT32 in phone
- flash radio if you want (if flash version available) or use radio upgrade during ROM flashing (put radio file
part00.bin in data.zip file before ROM flash)
STEP 1. - when HSPL and/or MAGLDR not installed
- Flash HSPL 2.08 if needed (put device in bootloader before Flash:
press and hold Volume down + Power button)
- Flash MAGLDR 1.13 (put device in bootloader before Flash:
press and hold Volume down + Power button)
Click to expand...
Click to collapse
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
MasterMaarten said:
I used the manual from dxdy:
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
Click to expand...
Click to collapse
you should do task29 whether you have android or not....between flashes even if wp7. task29 cleans out the memory area where the OS will reside.
as for the radio...radio thread for the TMOUS radio is here:
http://forum.xda-developers.com/showthread.php?t=1111613
more than likely you shouldn't have to flash a radio, but it won't hurt. only have to do it once.
in order to use the rom flash utility...you have to go into magdlr main screen...scroll down to and select 10. Services, then select 5. CleanMBR, and then 4. Uselast24NAND. Finally, back at the main set of options select 5. USB Flash.
Then you kick off your DWI.exe in admin mode.
Hello fellow HD2-Users.
Until about two days ago my HD2 (Vodafone-EU) was happily running tytungs NexusHD2 Android ROM from a NativeSD-Installation (HSPL 2.08 and MAGLDR), but suddenly it did not boot anymore. The white HTC Screen appears, MAGLDR starts, finds the Image and starts doing it's magic, the black HTC Screen appears and bam, frozen. I am still able to enter the MAGLDR Menu and Recovery (recovery-4EXT and CWM, doesn't matter) and can install ROM's via the SD-Card into NAND and NativeSD, but it just won't boot, no matter what i do.
After that i tried a complete wipe by installing the official stock Vodafone 3.14 WM ROM: Doesn't work. The status bar appears on the phone but is stuck at 0% and after a few minutes RUU crashes. Same with HSPL v2 and v4.
Does anyone have any idea what is wrong with my phone? Is the RAM, CPU or NAND broken in some way? If not, does anyone know how to recover it?
Azurewrath said:
Hello fellow HD2-Users.
Until about two days ago my HD2 (Vodafone-EU) was happily running tytungs NexusHD2 Android ROM from a NativeSD-Installation (HSPL 2.08 and MAGLDR), but suddenly it did not boot anymore. The white HTC Screen appears, MAGLDR starts, finds the Image and starts doing it's magic, the black HTC Screen appears and bam, frozen. I am still able to enter the MAGLDR Menu and Recovery (recovery-4EXT and CWM, doesn't matter) and can install ROM's via the SD-Card into NAND and NativeSD, but it just won't boot, no matter what i do.
After that i tried a complete wipe by installing the official stock Vodafone 3.14 WM ROM: Doesn't work. The status bar appears on the phone but is stuck at 0% and after a few minutes RUU crashes. Same with HSPL v2 and v4.
Does anyone have any idea what is wrong with my phone? Is the RAM, CPU or NAND broken in some way? If not, does anyone know how to recover it?
Click to expand...
Click to collapse
Sounds like your sdcard is gone kaput!
Can you see it with computer? If so make a backup and reformat from recovery.
shanman-2 said:
Sounds like your sdcard is gone kaput!
Can you see it with computer? If so make a backup and reformat from recovery.
Click to expand...
Click to collapse
Nope, the SDCARD is fine, as this behavior also happens when booting from NAND.
Also i just tried a way of flashing a rom i had already forgotten: i put the stock image as leoimg.nbh on the SC-Card and tried flashing that: First try failed, second try worked. I now have a working WM Vodafone ROM with SPL 3.03.
After that i tried reinstalling HSPL 2.08 by using HSPL4, but it failed with an error:
CRITICAL ERROR
Flow: 00000006
Error Code: 0000000D
Description: Unknown
Any further ideas?
Azurewrath said:
Nope, the SDCARD is fine, as this behavior also happens when booting from NAND.
Also i just tried a way of flashing a rom i had already forgotten: i put the stock image as leoimg.nbh on the SC-Card and tried flashing that: First try failed, second try worked. I now have a working WM Vodafone ROM with SPL 3.03.
After that i tried reinstalling HSPL 2.08 by using HSPL4, but it failed with an error:
CRITICAL ERROR
Flow: 00000006
Error Code: 0000000D
Description: Unknown
Any further ideas?
Click to expand...
Click to collapse
Don't know what error that is but you could try clk 1.5, and install from the sdcard.
Have a look here at post 3.
Still not sure about your sdcard though, I would back it up and reformat the ext partition!
Oh sh**, you have to install HSPL first!
Does the installer start or do you get thiserror before?
shanman-2 said:
Don't know what error that is but you could try clk 1.5, and install from the sdcard.
Have a look here at post 3.
Still not sure about your sdcard though, I would back it up and reformat the ext partition!
Oh sh**, you have to install HSPL first!
Does the installer start or do you get thiserror before?
Click to expand...
Click to collapse
It's definitely not the SD-Card. I already wiped all partitions on it and repartitioned/formatted and i also tried another SD Card.
This Error appears when i try to install HSPL.
Azurewrath said:
It's definitely not the SD-Card. I already wiped all partitions on it and repartitioned/formatted and i also tried another SD Card.
This Error appears when i try to install HSPL.
Click to expand...
Click to collapse
You are in tricolor screen (bootloader) when trying to install HSPL and the word "serial" on bottom of phone changes to "usb"?
shanman-2 said:
You are in tricolor screen (bootloader) when trying to install HSPL and the word "serial" on bottom of phone changes to "usb"?
Click to expand...
Click to collapse
Yes, of course.
I now changed the USB cable and tried again and on the third try it worked: I now have HSPL 2.08 installed again. But now i can't flash MAGLDR or cLK again because RUU times out. Bah..
Azurewrath said:
Yes, of course.
I now changed the USB cable and tried again and on the third try it worked: I now have HSPL 2.08 installed again. But now i can't flash MAGLDR or cLK again because RUU times out. Bah..
Click to expand...
Click to collapse
I managed to install MAGLDR via SD-Card and to repartition the NAND. From there i booted into 4EXT Recovery, repartitioned the SD-Card and installed the NexusHD2 Android Image.
And now i am where i was in the beginning.
White HTC Screen
MAGLDR
Black HTC Screen
-> Reboot loop
ARGH.
Guess i have to buy a Nexus 4 or something.. sniff.
Not a bad idea!
But try to install clk 1.5, repartition your nand with it and install again (dataonext). Make the system partition 350mb or bigger.
Sent from my NexusHD2 using xda premium
shanman-2 said:
Not a bad idea!
But try to install clk 1.5, repartition your nand with it and install again (dataonext). Make the system partition 350mb or bigger.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Sorry for answering so late, didn't really have time to tinker around with my Phone.
I installed cLK 1.5 and repartitioned the NAND with it. Installed a ROM aaaaand.. boot loop.
Guess some part of the Hardware is broken.. i only find it really strange that the WinMob ROM booted without problems.
Edit: OMG, i changed from the NexusHD2 2.3/2.3/2.5 ROM back to the 1.5 version you also use aaaaand... it boots! WTF, i used the 4.2.2 ROMs without any problems before...
Anyway, thank you very much for your help.