Go to here,
http://android.clients.google.com/p...c0.signed-sojus-GRJ90-from-GRJ22.39fe4c59.zip
Step 1 rename the file to update.zip(Do not open zip file).
Step 2 Copy update.zip to root of SDCARD.
Step 3 Power off phone.
Step 4 Press and hold Power+Vol up buttons(Enters Boot loader).
Step 5 Select Recovery.
Step 6 Press Vol up and Power(Before Exclamation Indicator comes up), if thats does not work , Press the Power button, or Vol up.
Step 7 Recovery menu options should appear, select apply update from SDCARD.
Step 8 Enjoy..
Note: This is for Stock Recovery Only(Self evident by the method used above).
Do not thank me refer to post,
http://forum.xda-developers.com/showthread.php?t=1181833&
Not that I care who's thread stays, but this is a duplicate of: http://forum.xda-developers.com/showthread.php?t=1185672
Perhaps one can be locked, I will report it to the site moderators.
You should state this is for stock recovery and not CWM.
my nexus s is flashed to boost mobile, if i update to 2.3.5 it will stop working with boost ?
please let me know
thanks
no, your phone will still be flashed, you will just lose the apn settings (mms and data) so youll have to enter those again but voice and sms will still work
Atheistnofaith said:
Go to here,
http://android.clients.google.com/p...c0.signed-sojus-GRJ90-from-GRJ22.39fe4c59.zip
Step 1 rename the file to update.zip(Do not open zip file).
Step 2 Copy update.zip to root of SDCARD.
Step 3 Power off phone.
Step 4 Press and hold Power+Vol up buttons(Enters Boot loader).
Step 5 Select Recovery.
Step 6 Press Vol up and Power(Before Exclamation Indicator comes up), if thats does not work , Press the Power button, or Vol up.
Step 7 Recovery menu options should appear, select apply update from SDCARD.
Step 8 Enjoy..
Note: This is for Stock Recovery Only(Self evident by the method used above).
Do not thank me refer to post,
http://forum.xda-developers.com/showthread.php?t=1181833&
Click to expand...
Click to collapse
I'm good down to step 7, get unload icon...I'm pressing vol up, but ! icon comes up.
Thoughts?
dwthrman said:
I'm good down to step 7, get unload icon...I'm pressing vol up, but ! icon comes up.
Thoughts?
Click to expand...
Click to collapse
Did you try holding down the power button and then tapping the Vol + button?
Related
Let me start by saying I have already read homeiss guide for upgrading to 2.2 but when I get to where I have to type in the command line it says cannot load recovery.alt.img: what I'm asking is for full instructions from 2.1 to 2.2 no partial instructions because I've never had this much trouble flashing a rom!
Sent from my Dell Streak using XDA App
dkwelton said:
Let me start by saying I have already read homeiss guide for upgrading to 2.2 but when I get to where I have to type in the command line it says cannot load recovery.alt.img: what I'm asking is for full instructions from 2.1 to 2.2 no partial instructions because I've never had this much trouble flashing a rom!
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Assuming your ADB and all that is set up...and you already downloaded the Release 1 of Froyo ROM.
Install clockworkMod recovery : Do this by downloading this:
http://loadbalancing.modaco.com/download.php?url=paul/streak/2.5.0.1-streak-clockworkrecovery.zip
and follow this instruction.
Download the recovery image zip file above and extract to a directory
Put your device in bootloader mode (Unplug the device from your PC, remove the device battery, then replace it and turn device on with the camera button pressed. Select the 'fastboot' text on the top right, wait around 10 seconds then plug the device into your PC. The screen display should change to 'FASTBOOT MODE'. If it doesn't, repeat and retry
WINDOWS - double click 'install-recovery-windows.bat'
(I've had instances where I had to literally run this batch file twice to ensure it was picked up by the device.
THEN, place the update-new.zip onto your sd card
Now boot streak into recovery by shutting down and holding vol up and down as you press power, select update from .pkg option and wait for Clockwork to load. Ignore errors regarding Misc...blah, blah...
-select flash zip from sd
-choose select zip from sd and find the update-new.zip and flash it
-Afterwards, press the power button to go back until you see the optiong to reboot. Enjoy your FROYO.
when i press the shutter button to install it gives me two errors: no signature annd verification failed or something like that i never see anything thats says install from zip
dkwelton said:
when i press the shutter button to install it gives me two errors: no signature annd verification failed or something like that i never see anything thats says install from zip
Click to expand...
Click to collapse
If youre at that part it should go like this...
1) Keep both volume buttons down and then power on. Sometimes its better to power on, once you see your back, home, and menu button light up, immediately press the 2 volume buttons and keep it pressed. If successful you should be faced with the Stock Recovery Screen. This will give you 4 options, and option 2 is install Update.pkg. Ensuring there is not file on root of SD Card that is labeled Update.pkg, select Option 2.
2) If you do this it will go black and a message saying.."Android....." and then you'll be faced with Koush's custom recovery. You'll know you're in custom recovery because you have to hold the Streak upside down. (3 buttons on top and earpiece at the bottom). If you see this then you're successful and should be straightforward from there. Follow the rest of the instructions provided in my previous post.
-------
-select flash zip from sd
-choose select zip from sd and find the update-new.zip and flash it
-Afterwards, press the power button to go back until you see the optiong to reboot.
this is frustrating. ... when I did it_it went to the stock recovery and when I press shutter button it doesn't go to the custom recovery and I know I flashed it
Sent from my Dell Streak using XDA App
nevermind i finally got it
My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.
Turn it off. Hold the trackball while starting it up. If you have usb debugging on and working fastboot drivers, you can wipe your phone (fastboot -a in cmd) and flash an img file of like a stock ROM.
Sent from my Nexus One using Tapatalk
Thanks Theshawty, donno why my Nexus One can't even boot up now
wingod513 said:
Thanks Theshawty, donno why my Nexus One can't even boot up now
Click to expand...
Click to collapse
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.
wingod513 said:
My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.
Click to expand...
Click to collapse
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
taodan said:
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.
Click to expand...
Click to collapse
I tried this already but still not work, I had brought my phone to some third party mobile repair centre, they said my N1 is CPU broken and will cost around US$96 to replace with a new CPU (HTC need around US$190 for mother board). I paid US$96 anyways. not sure if it worth.
cnalbant said:
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
Click to expand...
Click to collapse
Thanks, I will try this after my phone get fixed.
cnalbant said:
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
Click to expand...
Click to collapse
These links not working, please help me update. thanks
are you sure you just didn't lose your recovery
rugmankc said:
are you sure you just didn't lose your recovery
Click to expand...
Click to collapse
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium
wingod513 said:
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.
race55 said:
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.
Click to expand...
Click to collapse
The bootloader of my N1 is unlocked, I am not familiar with fastboot thing. My friend helped mine root and he is out of my country now. Gotta follow cnalbant's steps and see.
Install ClockworkMod Recovery on Nexus One Manually
Step 1: Download ClockworkMod Recovery: recovery-clockwork-2.5.1.1-passion.img (there are more current, look at the xda)
Step 2: Set up ADB for Nexus One
Step 3: Put the downloaded recovery-clockwork-2.5.1.1-passion.img in C: drive
Step 4: Turn Nexus One off and connect it to PC via USB
Step 5: Hold the Power button + Trackball together to start Nexus One in fastboot mode
Step 6: Once in fastboot mode, open Terminal / Command Prompt and run following command:
fastboot devices
This command will check if your device is connected in fastboot mode or not.
Step 7: Now run following command (place the file recovery in the same folder where the fastboot):
fastboot flash recovery recovery-clockwork-2.5.1.1-passion.img
This will install Clockwork recovery on your Nexus One.
That’s it, enjoy!
You can either follow the above guide or this amon ra recovery guide
forum.xda-developers.com/wiki/HTC_Nexus_One/Recovery_Images
Amon ra is another recovery just like clock workmod
B4 using adb download the drivers of adb and fastboot
www.mediafire.com/?bhxmn903d6cz9eg
When you connect ur phone use device manager to locate the connection on win 7 and select install drivers frm folder and install frm the extracted folder of adb driver
Sent from my HTC Nexus One using XDA
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
mayank88288 said:
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
Click to expand...
Click to collapse
You can find link in this thread:
http://forum.xda-developers.com/showthread.php?t=2409681
Good guide
Sent from my U8800Pro using XDA Premium 4 mobile app
sajmons said:
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
Click to expand...
Click to collapse
i'm using u8800 pro.i installed CM10.2.but wifi is not working on my phone and gapps also not working.....pls help.....
I've got a new Tablet SM- T385. A tried to root it and successfully install TWRP and after that I flash Magisk without DM Verification. My phone could not boot up, it asked me to do Verification many times. Then I switch off and Start in TWRP again and flash DM Verification manually again then Reboot into System. After that My phone do not startup and struck in SAMSUNG diming and lighting. It's been more than a half an hour. When I tried to switch off manually no button works. WHAT SHALL I DO? Please help.
SOLVED:
When no button including even any combination key does nit work, follow the steps here:
1. Plug your charger.
2. Press the Power Button at least for 10 seconds.
3. Unplug the Charger.
4. Then Press Home Button + Volum Down then Power Button
5. As soon as the screen goes black, before it start up; Press Volume + Home Button Only
6. Phone will Start into Recovery
7. Then, Wipe Data and Factory Reset.
8. Start into System.
9. Wait for a while......
10. SMILE NOW
Hi,
Out of nowhere my nexus 10 is in april bootloop. At the Google logo it restarts, so after about 5 seconds. I've tries power button + volume down, this results in the screen with android bot on back, text below: Downloading, do not power off. This is not the screen with a red exclamation Mark. I cannot get to this screen.
Then after 2 seconds in the screen, it reboot again. The buttons do not work in this screen.
The computer does not detect the tablet (because it keeps rebooting probably.
Thnx in advance for advice
Put your device in Bootloadermode by pressing all the buttons. An android without text should be in the middle. (if u wanna boot in recovery push volum up or down to navigate and with the power button you do what is written on the left side like"start" or "recovery" etc.)
For resetting it to Stock rom just follow this guide
u will need to download "Nexus Root Toolkit" for this Guide
1.Put your device in bootloader like mentioned befor but dont start anything just let it be. Plug the tablet in.
2. Open"Nexus Root Toolkit"
3. Open it up and then select "Softbricked/Bootloop" then klick on "Flash stock + Unroot"
4.If it says that your device isnt unlocked or u noticed that the Lock state of the device is on Locked then u can unlock it with the "unlock bootloader" option and then repeat step 3.
5. Follow the setup on the screen and then you are good to go.