Database Users

[REQ] original Roms for XT720

Buddies,
can anyone upload the original roms for Milestone XT720? (SG, Kr, and other)
So we can do more testing worry free. If anything goes wrong, we can just flash it back to original. It would be nicer if someone can also show how to flash the rom.
------- Edit ---------
Flashing Guide by Hahutzy
Hahutzy said:
Alright, I just crashed my phone into an infinite FC loop by messing with system/app, so a reflash was in order.
Here's how I successfully flashed it back to stock using Windows 7 32bit (dense text ahead):
1) Search somewhere along the lines of "RSDLite - download here" on google
2) Go inside first link, download the file that's named somewhere along the lines of "RSDLite_4.5.3.zip"
3) Install it.
4) Go to http://and-developers.com/sbf:xt720
5) Download the 2nd Full Flash rom, the one where the provider is "Southeast Asia"
6) Unzip that file, you now have a .sbf folder (not file)
7) Put that .sbf folder in C:\Users\Admin\My Documents
8) Shut down phone, take out battery
9) Hold Power + Volume Down + Camera buttons all at once
10) Put in the battery while holding those buttons
11) Phone is now in bootloader mode (screen looks like a command prompt)
12) Release the buttons, and plug USB to computer and phone
13) Open RSD Lite, your phone should be detected as connected (Device name was like "S OMAP 3440" or some BS like that)
14) Click "..." to browse for the .sbf file in C:\Users\Admin\My Documents
15) In RSD Lite, click to highlight your connected XT720, and then click "Start". The first column beside the connected phone should now have a green icon thing, and the ROM is being flashed.
16) DO NOT TOUCH YOUR PHONE, THE CABLE, OR THE COMPUTER! (I went and took a dump)
17) When the "Status" column in RSD Lite says "Please manually power up this phone", so shut it down and power it again. Note: The status stays in "Checksum Group 37" for a verrrrryyyy long time before saying "Rebooting". I thought it got stuck there, but it ended up ok.
18) Your XT720 is now reflashed to stock.
19) You can now close RSD Lite. It will complain saying you will damage the attached device, but I pulled it out wayyyy before this (I unhooked it when it told me to reboot manually) and my XT720 is not dead. You may choose to close RSD Lite before unhooking your XT720.
20) Post your results in this thread and confirm or reject my procedure.
spiderx_mm, you may quote this on your first post for others' easy access to this procedure if you so wish to.
Click to expand...
Click to collapse

I agree on this, i need a EU rom.

i am using an SG xt720. is there anyway to dump the rom?
@mariomsg1, i remember u have reflashed ur rom once before right? may i know where did u get the sg starhub rom last time? could u share it please. thanks

http://and-developers.com/sbf:xt720

xt720 said:
http://and-developers.com/sbf:xt720
Click to expand...
Click to collapse
yes, that is

there latest ROM is STR_U2_01.18.2
mine is STR_U2_02.18.3 (bought unlocked retail version from expansys europe)
anybody got same unrooted ROM? Mine has problems, I am stuck with ROOT which stopped working after couple of days, and now I can neither un-root, nor root again.

mariomsg1 said:
I agree on this, i need a EU rom.
Click to expand...
Click to collapse
can u share a step-by-step flash guide?

U can flash with RSDlite. just need a sbf file.

okie. any version do u recommend? or shall i just use the latest version?

Yes
Sent from my Milestone XT720

Sorry, can i know how to put the phone into bootloader mode? I cant not find in google and this forum for xt720.

press volume and power together

can not go to boot loader. Already press power and volume button

first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.

solnyshok said:
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
Click to expand...
Click to collapse
press play button and power, then press volume up and camera button

play button = small button next to the camera shutter

please help
When i do the guide, phone at first go to recovery mode, and nothing happen. RSD lite can not recognize the phone. I use recovery mode to wipe cache and data like it said factory reset. Then i get stuck. Phone can not start up, stand at motorola logo.
I still can go to recovery mode, but not boot loader mode. And it appear error in recovery mode: E:\ can't open /cache/recovery/command. Now how can i repair my phone?

flash sbf file with rsd lite on bootloader mode

Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
mariomsg1 said:
flash sbf file with rsd lite on bootloader mode
Click to expand...
Click to collapse

civi309 said:
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
Click to expand...
Click to collapse
go to flashing mode directly by pressing volume up+camera button+power button. after that just flash the sbf in provided the windows can see ur phone. make sure u also install the required driver

HELP!!!

Let me start by saying I have already read homeiss guide for upgrading to 2.2 but when I get to where I have to type in the command line it says cannot load recovery.alt.img: what I'm asking is for full instructions from 2.1 to 2.2 no partial instructions because I've never had this much trouble flashing a rom!
Sent from my Dell Streak using XDA App

dkwelton said:
Let me start by saying I have already read homeiss guide for upgrading to 2.2 but when I get to where I have to type in the command line it says cannot load recovery.alt.img: what I'm asking is for full instructions from 2.1 to 2.2 no partial instructions because I've never had this much trouble flashing a rom!
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Assuming your ADB and all that is set up...and you already downloaded the Release 1 of Froyo ROM.
Install clockworkMod recovery : Do this by downloading this:
http://loadbalancing.modaco.com/download.php?url=paul/streak/2.5.0.1-streak-clockworkrecovery.zip
and follow this instruction.
Download the recovery image zip file above and extract to a directory
Put your device in bootloader mode (Unplug the device from your PC, remove the device battery, then replace it and turn device on with the camera button pressed. Select the 'fastboot' text on the top right, wait around 10 seconds then plug the device into your PC. The screen display should change to 'FASTBOOT MODE'. If it doesn't, repeat and retry
WINDOWS - double click 'install-recovery-windows.bat'
(I've had instances where I had to literally run this batch file twice to ensure it was picked up by the device.
THEN, place the update-new.zip onto your sd card
Now boot streak into recovery by shutting down and holding vol up and down as you press power, select update from .pkg option and wait for Clockwork to load. Ignore errors regarding Misc...blah, blah...
-select flash zip from sd
-choose select zip from sd and find the update-new.zip and flash it
-Afterwards, press the power button to go back until you see the optiong to reboot. Enjoy your FROYO.

when i press the shutter button to install it gives me two errors: no signature annd verification failed or something like that i never see anything thats says install from zip

dkwelton said:
when i press the shutter button to install it gives me two errors: no signature annd verification failed or something like that i never see anything thats says install from zip
Click to expand...
Click to collapse
If youre at that part it should go like this...
1) Keep both volume buttons down and then power on. Sometimes its better to power on, once you see your back, home, and menu button light up, immediately press the 2 volume buttons and keep it pressed. If successful you should be faced with the Stock Recovery Screen. This will give you 4 options, and option 2 is install Update.pkg. Ensuring there is not file on root of SD Card that is labeled Update.pkg, select Option 2.
2) If you do this it will go black and a message saying.."Android....." and then you'll be faced with Koush's custom recovery. You'll know you're in custom recovery because you have to hold the Streak upside down. (3 buttons on top and earpiece at the bottom). If you see this then you're successful and should be straightforward from there. Follow the rest of the instructions provided in my previous post.
-------
-select flash zip from sd
-choose select zip from sd and find the update-new.zip and flash it
-Afterwards, press the power button to go back until you see the optiong to reboot.

this is frustrating. ... when I did it_it went to the stock recovery and when I press shutter button it doesn't go to the custom recovery and I know I flashed it
Sent from my Dell Streak using XDA App

nevermind i finally got it

Legend Won't Boot to Recovery

Hey guys,
I'm trying to boot into recovery mode on my Legend, but I've had no success as of now. I've tried using Rom Manager to boot to recovery and I've tried backing up my current Rom as well, but all I get is a phone with a red exclamation mark beside it. I've tried booting into fastboot, (Holding down the volume down button and power button) and hit the "Recovery" button, but still no luck. Any solutions would be greatly appreciated. Thanks guys.
PS: Sorry for posting two threads in two days.
EDIT: Solved. For those having a similar problem, all I had to do was run the recovery once from my PC using the file "Recovery-windows" in the Legend tools. It had to push the recovery files into my Legend again because I factory reset it a couple weeks ago. I've been trying to fix it for hours, love getting to the bottom of things.

This also works:
When you get to the red triangle of doom press volume up and power. Then using the volume buttons to navigate and the power button to select choose "install update.zip" (something like that, I honestly can't remember what of actually says) then observe as your phone ends up in recovery.
Sent from my GT-P1000 using XDA App

Hi,
I am new to HTC legend. I have a similar problem, can you please tell me what uyou refer to by "run the recovery once from my PC using the file "Recovery-windows" in the Legend tools." What program is that and how do I get it?
Thanks in advance.

Collectric: have you tried holding the volume up button and then pressing the power button?
For me it takes a few moments of pressing power but then a green box appears and i can move on.
Sent from my Legend using XDA App

Of course I pressed power and volume down, that's basic.
Unfortunately, I made a stupid mistake and tried to replace the recovery file using
http://forum.xda-developers.com/showthread.php?t=833423
which was prepare for Samsung phone (having the naive thought that Android is the same Android for every one ).
Since then I lost the possibility to go into recovery mode, and the author of the above mentioned program is not answering me, so now I am tryoing to look for a way to "recover" recovery mode ....
Thanks anyhow...

Well when I rooted my phone with theunlockr.com they gave us a legend tools folder and it has the recovery tools to push the recovery files into the phone which worked for me and I can then go into recovery freely I'll give you the link soon.
Sent from my Legend using Tapatalk
EDIT: Okay here it is http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/ make sure you download ONLY the "Legend Rooting Tools" and ONLY that you don't need anything else. Unzip the Legend Root Folder in the root of C:/ Also please do not follow the steps they mentioned as your phone is already rooted.
Here are the steps you should do:
1. Unzip the Legend Root Folder to "C:/"
2. Go to the folder in the "C:/" it should be called "R4-legend-root"
3. Put your phone in recovery mode using the power + volume down and click recovery in the PHONE not the PC.
4. When you're on the red triangle of doom (Make sure you are!) click "Recovery-windows" in the PC (Again located in the r4-legend-root folder which you unzipped)
5. A black box should come up pushing the files to your phone
6. Your phone should be in recovery mode
7. You can now go into recovery mode freely using ROM Manager instead of the computer like I do.
PS: Sorry for the late reply I was off on vacation.

Many thanks man, no need to apologize...
Well, the whole point is that strangely enough I CAN'T go into recovery mode on my phone...
Since that stupid act of trying to work with the Samsung program, when I press power and volume down I get into "Factory mode" which gives me the options to test my device, clear the flash and Reboot.
I don't even have the option to go into recovery mode...
I can try and copy all those files manually, as my phone is rooted. I will copy the files from PC into my SD then move them with my phone "total commander" into the proper folders in the root flash.
Does it sound like a plan?
Thanks again

Hi,
As you probably guessed, root is read only, so I met a dead end. I have no way to go into recovery mode thus can't replace any file in root.
I tried to reboot to recovery using "adb reboot recovery", the phone reboots and get stuck with green HTC on the screen - I had to remove battery, put back, press power with volume down to enter "Factory mode", select reboot and get again normal operation.
Any innovative idea?
Thanks in advance...

Maybe you can try to reroot your phone using the unlockr.com method. But I'm not a specialist at these kinds of issues, I wish to be more help. But is there any you can try to reroot your phone using theunlockr.com method?

Yes, I am working on it but I am not so optimistic as, on the way, they also instruct to go into recovery mode. Anyhow, till I discover something better I'll give it a shot.
Many thanks on your assistance.

As I suspected, its a vicious circle, all the repair methods eventually end in the recovery mode. To recover recovery mode I have to go into recovery mode - sad but seems to be true. I will try to open a new thread maybe there is some Android sage with some trick in the sleeve for me....
Thanks again

I'm sorry I couldn't be of help. If you do manage to get it fixed please tell me how you did it because it would be very useful to know recovery mode is essential for every phone. Thank you and sorry again.
Sent from my Legend using Tapatalk

HTC Legend doesn't boot into recovery even after pushing recovery files through PC
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.

asifisbest said:
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.
Click to expand...
Click to collapse
when at the /!\ screen press; volume + and powerbutton, and see if that helps

I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.

adrianwallis said:
I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.
Click to expand...
Click to collapse
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!

chongyixiong said:
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!
Click to expand...
Click to collapse
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.

adrianwallis said:
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.
Click to expand...
Click to collapse
So are you saying that this "extra step" resulted from the fact that my phone is still S-ON? If that is so, I guess the benefits of this read-only system allows me to flash ROMs much easier (without having to connect to ADB).
Thanks!

I'm not sure if this is gonna help, but you can try pressing the "BACK" button while pressing power on?

Can't pass HTC welcome screen

Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Here are the steps I followed,
Steps for this process:
1. Download the Advanced Ace Hack Kit
2. Extract the files
3. Install Desire HD drivers in /tools/windrivers/
4. Connect the device via USB and turn on USB Debugging in Settings-Applications-Development
5. Run the hack-ace.cmd as Administrator and start the process by typing "1" and "Enter"
6. The process will run and will take about 5-6 minutes to complete
7. Download your ROM of choice, do not extract it, and copy the .zip to the device SD card
8. Rename the file to "update.zip"
9. Power off your device
10. To boot in the bootloader, perform a battery pull, reinstate the battery, and hold the volume down and power buttons
11. Using the volume buttons to navigate, and power button to make selections, boot into Recovery, clear the cache, and select 'install update from sdcard'.
12. When the flashing process has completed, reboot your device and wait about 3-4 minutes for it to boot fully
13. You device is now rooted and has a custom ROM installed
I strongly believe, I forgot to power off the device and go straight to the bootloader and pressed the install update.zip from SD card.
Then I also believe that I used a corrupted ROM from a crap website, which is about 75Mb...Not normal, right?
The screen turn into HTC logo and I waited for 2mins and seen no changes, hence I pulled the cable out....
The final result is that I always get the HTC logo even if I tried to install new ROM file downloaded from a valid site.
Now the problem solved. Love your guys

lkj-17 said:
Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Sorry about my English, hopefully you can understand what I am saying.
Any one can help me out?
Click to expand...
Click to collapse
No so understand ur indication issue. Firstly are able to get into bootloader mode? If yes, try to flash stock firmware 1.32......from the billiard, but make sure you have stock firmware in your sd card which it should be a Goldcard.
Sent from my HTC Desire HD using xda premium

Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...

lkj-17 said:
Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...
Click to expand...
Click to collapse
Use the button combo to get into bootloader mode.
Sent from my HTC Desire HD using xda premium

Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.

lkj-17 said:
Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.
Click to expand...
Click to collapse
Pull out the battery first, put back, Volume down + power button together at the same time.
Let me know if you have followed this so far and could get it working?
Sent from my HTC Desire HD using xda premium

That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..

lkj-17 said:
That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..
Click to expand...
Click to collapse
you have gone into stock recovery not a custom recovery, you could flash stock firmware from boot loader i think but you cant install custom roms untill your get custom recovery + root + eng s off

hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers

lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
If u r already in custom recovery and s-off applied with fully rooted, u may flash the rom through install zip file option in custom recovery not update zip file. What was ur last running rom? Stock with rooted or.was already flashed from stock to any custom roms? U my tell us more details so that we could be helping u.
Sent from my HTC Desire HD using xda premium

lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
Dude here is the rooted stock ATT ROM it includes the radio. Just download place in root of gold card then go to bootloader with power - volume button. it will recognize the PD98IMG file, will ask to load volume up for yes then let it do its thing. Please search and read before you attempt anything with phone. AS ADVICED ON XDA FLASH AT YOUR OWN RISK.
http://www.megaupload.com/?d=Q6YYQFIM
This is the rooted ATT updated ROM with radio do not rename file just place in root of SD (Not in any folder) Good Luck.

Hello, please look at my original post. I have edited and provide more history. Cheers

Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?

lkj-17 said:
Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?
Click to expand...
Click to collapse
Yes, u need to flash PD98IMG.ZIP to have your device working back. If your phone is branded , it will require gold card which u should create it one for your device to recognize it or u may download the above mentioned zip file to ur pc then copy to ur sd card first, and get the phone into bootloader mode to see If it could recognize in case ur phone is not branded, If it is so, then u can save time for not creating goldcard and progress to flash the rom from as card.
Remember no need to rename the file. Ur responding in this thread is on & off, users here could not help u when u urge to get ur phone working back.
Sent from my HTC Desire HD using xda premium

Thank you so much. This file got my system back and it works perfectly.

my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!

I am picking you need to install the right HTC driver, there should be one on the hack kit, if not google it, look for version one. Once I installed it
It carried on and rooted without issue.
Sent from my Desire HD using xda premium

prasadz8 said:
my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!
Click to expand...
Click to collapse
Go to desktop, right click on my computer select manage, select device manager from left locate device driver from the list in middle panel, locate the htc usb it may have a yellow triangle next to it, right click and select update software Try this first before downloading another driver, if this doesn't work then you well have to locate new driver
Hope this helps
Sent from my Desire HD using xda premium

Here's another option.
http://forum.xda-developers.com/showthread.php?t=1259821
Sent from my Desire HD, running RCMix Runny v3.3

[GUIDE] Upgrade stock 4.0.3 ICS to CyanogenMod 10.2 JB 4.3

I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on

thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!

mayank88288 said:
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
Click to expand...
Click to collapse
You can find link in this thread:
http://forum.xda-developers.com/showthread.php?t=2409681

Good guide
Sent from my U8800Pro using XDA Premium 4 mobile app

sajmons said:
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
Click to expand...
Click to collapse
i'm using u8800 pro.i installed CM10.2.but wifi is not working on my phone and gapps also not working.....pls help.....