Hey guys,
I'm trying to boot into recovery mode on my Legend, but I've had no success as of now. I've tried using Rom Manager to boot to recovery and I've tried backing up my current Rom as well, but all I get is a phone with a red exclamation mark beside it. I've tried booting into fastboot, (Holding down the volume down button and power button) and hit the "Recovery" button, but still no luck. Any solutions would be greatly appreciated. Thanks guys.
PS: Sorry for posting two threads in two days.
EDIT: Solved. For those having a similar problem, all I had to do was run the recovery once from my PC using the file "Recovery-windows" in the Legend tools. It had to push the recovery files into my Legend again because I factory reset it a couple weeks ago. I've been trying to fix it for hours, love getting to the bottom of things.
This also works:
When you get to the red triangle of doom press volume up and power. Then using the volume buttons to navigate and the power button to select choose "install update.zip" (something like that, I honestly can't remember what of actually says) then observe as your phone ends up in recovery.
Sent from my GT-P1000 using XDA App
Hi,
I am new to HTC legend. I have a similar problem, can you please tell me what uyou refer to by "run the recovery once from my PC using the file "Recovery-windows" in the Legend tools." What program is that and how do I get it?
Thanks in advance.
Collectric: have you tried holding the volume up button and then pressing the power button?
For me it takes a few moments of pressing power but then a green box appears and i can move on.
Sent from my Legend using XDA App
Of course I pressed power and volume down, that's basic.
Unfortunately, I made a stupid mistake and tried to replace the recovery file using
http://forum.xda-developers.com/showthread.php?t=833423
which was prepare for Samsung phone (having the naive thought that Android is the same Android for every one ).
Since then I lost the possibility to go into recovery mode, and the author of the above mentioned program is not answering me, so now I am tryoing to look for a way to "recover" recovery mode ....
Thanks anyhow...
Well when I rooted my phone with theunlockr.com they gave us a legend tools folder and it has the recovery tools to push the recovery files into the phone which worked for me and I can then go into recovery freely I'll give you the link soon.
Sent from my Legend using Tapatalk
EDIT: Okay here it is http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/ make sure you download ONLY the "Legend Rooting Tools" and ONLY that you don't need anything else. Unzip the Legend Root Folder in the root of C:/ Also please do not follow the steps they mentioned as your phone is already rooted.
Here are the steps you should do:
1. Unzip the Legend Root Folder to "C:/"
2. Go to the folder in the "C:/" it should be called "R4-legend-root"
3. Put your phone in recovery mode using the power + volume down and click recovery in the PHONE not the PC.
4. When you're on the red triangle of doom (Make sure you are!) click "Recovery-windows" in the PC (Again located in the r4-legend-root folder which you unzipped)
5. A black box should come up pushing the files to your phone
6. Your phone should be in recovery mode
7. You can now go into recovery mode freely using ROM Manager instead of the computer like I do.
PS: Sorry for the late reply I was off on vacation.
Many thanks man, no need to apologize...
Well, the whole point is that strangely enough I CAN'T go into recovery mode on my phone...
Since that stupid act of trying to work with the Samsung program, when I press power and volume down I get into "Factory mode" which gives me the options to test my device, clear the flash and Reboot.
I don't even have the option to go into recovery mode...
I can try and copy all those files manually, as my phone is rooted. I will copy the files from PC into my SD then move them with my phone "total commander" into the proper folders in the root flash.
Does it sound like a plan?
Thanks again
Hi,
As you probably guessed, root is read only, so I met a dead end. I have no way to go into recovery mode thus can't replace any file in root.
I tried to reboot to recovery using "adb reboot recovery", the phone reboots and get stuck with green HTC on the screen - I had to remove battery, put back, press power with volume down to enter "Factory mode", select reboot and get again normal operation.
Any innovative idea?
Thanks in advance...
Maybe you can try to reroot your phone using the unlockr.com method. But I'm not a specialist at these kinds of issues, I wish to be more help. But is there any you can try to reroot your phone using theunlockr.com method?
Yes, I am working on it but I am not so optimistic as, on the way, they also instruct to go into recovery mode. Anyhow, till I discover something better I'll give it a shot.
Many thanks on your assistance.
As I suspected, its a vicious circle, all the repair methods eventually end in the recovery mode. To recover recovery mode I have to go into recovery mode - sad but seems to be true. I will try to open a new thread maybe there is some Android sage with some trick in the sleeve for me....
Thanks again
I'm sorry I couldn't be of help. If you do manage to get it fixed please tell me how you did it because it would be very useful to know recovery mode is essential for every phone. Thank you and sorry again.
Sent from my Legend using Tapatalk
HTC Legend doesn't boot into recovery even after pushing recovery files through PC
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.
asifisbest said:
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.
Click to expand...
Click to collapse
when at the /!\ screen press; volume + and powerbutton, and see if that helps
I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.
adrianwallis said:
I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.
Click to expand...
Click to collapse
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!
chongyixiong said:
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!
Click to expand...
Click to collapse
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.
adrianwallis said:
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.
Click to expand...
Click to collapse
So are you saying that this "extra step" resulted from the fact that my phone is still S-ON? If that is so, I guess the benefits of this read-only system allows me to flash ROMs much easier (without having to connect to ADB).
Thanks!
I'm not sure if this is gonna help, but you can try pressing the "BACK" button while pressing power on?
Related
I found a site with someone who bricked their phone but found a loop hole. I have never bricked my phone and hoping i never will but for those who have bricked their phone here are some steps to try to unbrick it! HOPE IT HELPS! SEND FEED BACK!!
So you can’t access bootloader or recovery and the only thing that works is the blue led trick when pressing trackball + power button??
Try the procedure below.
Step 1: Turned Phone off by taking out the battery.
Step 2: Prepared SD card
Put SD card in card reader and formatted it as FAT32, copied the DREAIMG.nbh onto it.
Or try Sapphimg.nbh
Step 3: Put SD card back in phone
Step 4: Hold Vol down + Power + track ball together and put battery to start phone
Step 5: Run update
IF THAT DIDNT WORK!
TRY THIS!
Step 1: Turning Off Your Phone
Because you have a bricked phone, you can't just hold the power button. So if your phone is not already off then you're going to want to take out the battery.
Step 2: Preparing Our SD card
Take out your SD card and put it into an SD card reader or some type of other adapter so that we can view it from our computer. If you cannot view the SD card on your computer then you're going to need a new SD card.
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
The G1 screen will hang there for a good minute or two, but be paticiant, it will boot. Now you have a choice. Try to hack your phone again, because you're in the correct state to have another go, or, you can stick with the official Android. Now if you choose to stick with the official Android, here's what you do.
Step 1: Upgrading to Android 1.0 RC33
Download the file signed-PLAT-RC33-from-RC30.zip
Rename the file to update.zip and copy it to your SD card
Reboot your phone into recovery mode. Power off the phone first and then hold down the Home key while powering it back on.
The recovery mode is finished loading when you see the ! mark inside the triangle. Press Alt + L to display the list of options.
Press Alt + S to flash the file update.zip.
Wait for the update to apply. Your phone may reboot during this process so be patient.
Press Home + Back if prompted to reboot your phone.
Step 2: Upgrading to Android 1.5 CRB43
Download the file signed-kila-ota-148830.de6a94ca.zip
Repeat the steps from above to flash the update file.
Step 3: Upgrade to Android 1.5 CRC1
Download the file signed-kila-CRC1-from-CRB43-FIX.7ca4a1d7.zip
Repeat the steps from above to flash the update file.
Step 4: Upgrade to Android 1.6 DRC83
Download the file signed-kila-DRC83-from-CRC1.c41b93c1.zip
Repeat the steps from above to flash the update file.
PM FOR THE DIRECT WEBSITES!
sad cause this will get locked soon.
domuhhnic said:
sad cause this will get locked soon.
Click to expand...
Click to collapse
why? all we need is someone who can confirm this is true on xda and it will be stickied EVERYWHERE
LOCKED?
domuhhnic said:
sad cause this will get locked soon.
Click to expand...
Click to collapse
Why will this get locked??
Yuppie
oshizzle1991 said:
why? all we need is someone who can confirm this is true on xda and it will be stickied EVERYWHERE
Click to expand...
Click to collapse
Exactly .. but i dont know anyone with a bricked phone so i cant ask them if it works.. if it gets locked (whatever that means) i'll repost it!
id be interested to see if this works... although its assuming you have a dream/g1 .. did you post this in the g1 section?
POST?
digitaljeff said:
id be interested to see if this works... although its assuming you have a dream/g1 .. did you post this in the g1 section?
Click to expand...
Click to collapse
Yes, I have a HTC MAJIC/MYTOUCH .. nope i have not posted it there but i will now
i tried to update radio and now :
So you can’t access bootloader or recovery and the only thing that works is the blue led trick when pressing trackball + power button??
Try all of this methods , but no result..
phone just shows htc magic when i turn it on usually, and nothing!
what can i do?
...
Im still looking of ways to unbrick phones
Possible hint!
Has anyone tried using adb .. Reflashing the recovery img??
...another hint..
kemimarie said:
Has anyone tried using adb .. Reflashing the recovery img??
Click to expand...
Click to collapse
run fastboot boot recovery-image.img or whatever you named your recovery image. It'll display "waiting for device..." message just keep pluging it in, unplugging, popping the battery and eventually your device will respond and boot into recovery.
Someone bricked and i did it... twice trying to flash the eng 2010 SPL. It worked the third time and my device is up and running again with an engineering SPL.
if your device is stuck on the first splash but displays in red "Fastboot USB" message in the upper left corner of the screen, DO NOT power it down. run the above mentioned command and reflash.
deleted... double post.
Found another hint
ch3w said:
confirmed...
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image!
Click to expand...
Click to collapse
try that on your g1/mytouch!
kemimarie said:
try that on your g1/mytouch!
Click to expand...
Click to collapse
this method worked on my second bricked magic, still trying it on the first one but... no luck yet. i had the same problem with both of them tho
kemimarie said:
run fastboot boot recovery-image.img or whatever you named your recovery image. It'll display "waiting for device..." message just keep pluging it in, unplugging, popping the battery and eventually your device will respond and boot into recovery.
Someone bricked and i did it... twice trying to flash the eng 2010 SPL. It worked the third time and my device is up and running again with an engineering SPL.
if your device is stuck on the first splash but displays in red "Fastboot USB" message in the upper left corner of the screen, DO NOT power it down. run the above mentioned command and reflash.
Click to expand...
Click to collapse
fastboot boot recovery?
boot.img and recovery.img are two totally different things.
The recovery (amon_ra is preferred)
The boot.img is where the kernel, ramdisk, etc resides.
you must've meant fastboot flash boot boot.img
or
fastboot flash recovery recovery.img
but not both.
ch3w said:
this method worked on my second bricked magic, still trying it on the first one but... no luck yet. i had the same problem with both of them tho
Click to expand...
Click to collapse
YAAYY!! Im glad to hear you say you had some success!
Binary100100 said:
fastboot boot recovery?
boot.img and recovery.img are two totally different things.
The recovery (amon_ra is preferred)
The boot.img is where the kernel, ramdisk, etc resides.
you must've meant fastboot flash boot boot.img
or
fastboot flash recovery recovery.img
but not both.
Click to expand...
Click to collapse
I just copied and pasted from a website.. THEY did that and it worked for them lol
bricked Mytouch3g
Bricked mytouch3g -- brandnew phone. Just tried to flash cyanogen test3 and everything went fine but then I rebooted and all I have is vodafone boot screen, nothing else works but the blue led which will not load any img. adp doesn't work it never detects a phone no matter what you do. It was the first flash too. Crazy how HTC didn't make a built in hard reset like you have on windows mobile phones. You wonder if they want people to crash there phones so they have to replace them ect etc.
Hello.
My phone has the same problem.
Anything that is needed done. But no no avail.
My phone is brick.
Help help help
Mod edit: not dev related, moved to general
Can't seem to get CWM installed through "ROM Manager", no matter how hard you damn well try? While trying to flash my Legend, I came across something which may help you guys out as it did me.
NOTE: You must have root to to do this.
This is a NON-PERMANENT solution. Using this method will NOT permanently replace your stock recovery with CWMs.
Download the file attached to this post.
Rename the file to "update.zip"
Place it on the root of your sdcard and then turn off your Legend.
Hold the volume buttons and the power button. You will boot into HBOOT.
After HBOOT scans for the LEGEIMG stuff, navigate to the "RECOVERY" option with the volume down button, and hit the power button to select it. Afterwards, you'll hit the dreaded "RED EXCLAMATION MARK OMG OMG WHAT DO" screen.
Hold the volume buttons and the power button again, and ignore the error which appears.
After the blue menu appears, navigate to "Apply update.zip" and select it.
Magic just happened. SUDDENLY YOU'RE IN CLOCKWORKMOD RECOVERY.
From here you can flash ROMS, wipe your cache, etc etc etc.
Hope this helps anyone having trouble flashing CWM.
P.S. This may well work for other models having trouble flashing CWM.
Nice guide, but There is allready a guide for this in dev. Fake-Flash
Sent from my Legend using Tapatalk
And you do need to be rooted
I just reset mytouch 4g phone and during restart the recovery screen just come out but I can't move down or up anything on the screen it just stuck..
I just update cm to version 3 of something
please I really need help on this my phone is already S-off
when I plug the phone with USB it response something by HBOOT has changed to HBOOT USB PLUG
I use Stock Rom just update Kernal only
Need more specifics. "3 of something" is too vague.
If you flashed clockwork mod recovery 3 (the text is orange) while using a stock ROM you will have issues. Clockwork 3 is for gingerbread based ROMs only.
If that is so, download CyanogenMOD 7 RC1 and try to flash it. Rebooting may help get recovery working right again. If not, and you are unable to re-flash a ROM, you will need to use fastboot to re-flash a good recovery image.
Marine6680 said:
Need more specifics. "3 of something" is too vague.
If you flashed clockwork mod recovery 3 (the text is orange) while using a stock ROM you will have issues. Clockwork 3 is for gingerbread based ROMs only.
If that is so, download CyanogenMOD 7 RC1 and try to flash it. Rebooting may help get recovery working right again. If not, and you are unable to re-flash a ROM, you will need to use fastboot to re-flash a good recovery image.
Click to expand...
Click to collapse
when I upplug battery, and turn the phone on, it won't boot it just re direct to the Clockwork Mod screen and the screen lock volume up and down can't navigate anything power botton won't work tooo..I try to un plug battery again and turn on again the result is the same...
wibul_10 said:
when I upplug battery, and turn the phone on, it won't boot it just re direct to the Clockwork Mod screen and the screen lock volume up and down can't navigate anything power botton won't work tooo..I try to un plug battery again and turn on again the result is the same...
Click to expand...
Click to collapse
In clockwork you use the trackball to navigate. Volume buttons won't work.
Lakeshow423 said:
In clockwork you use the trackball to navigate. Volume buttons won't work.
Click to expand...
Click to collapse
no response on trackball too. it just stuck on this screen and can't move anywhere....any solution
Your attached image is of the Bootloader, not CWM Recovery.
The Bootloader is controlled by volume up / volume down to move between selections, and the power button is used to select.
jggimi said:
Your attached image is of the Bootloader, not CWM Recovery.
The Bootloader is controlled by volume up / volume down to move between selections, and the power button is used to select.
Click to expand...
Click to collapse
when I turn the phone on everytime it just show this bootloader and no response on all volume up/down and power button...only way to turn off is to unplug battery ....
You might see if the Bootloader can communicate with fastboot on your PC. If so, you will have options for un-bricking from your PC.
See http://forum.xda-developers.com/showthread.php?t=928370 for info on installing adb and fastboot to your PC, and using them.
Fastboot is designed to communicate with the bootloader. As far as I know, however, adb requires a functioning Android or Recovery system.
jggimi said:
You might see if the Bootloader can communicate with fastboot on your PC. If so, you will have options for un-bricking from your PC.
See http://forum.xda-developers.com/showthread.php?t=928370 for info on installing adb and fastboot to your PC, and using them.
Fastboot is designed to communicate with the bootloader. As far as I know, however, adb requires a functioning Android or Recovery system.
Click to expand...
Click to collapse
One more question, after following your advice, I found that I now can restart my phone again but when I shut down the phone and turn it on again it still stuck on bootloader screen all the times...any suggestion would be appreciate...
You can "restart my phone again" -- is it running Android at that point? If so, you can restore your phone to stock, and do a full factory reset, by putting the P15IMG.zip file on the root of your SD card and rebooting. The bootloader (if it is functional) should find it and begin the restore procedure.
Dowload, rename this, and stick it on your SD card, and reboot. If after a successful return to factory defaults, your phone still isn't working, the problem is likely not software.
http://www.filedropper.com/pd15imgglaciertmous1175312radio1228b60140e26030226mrelease155771signed
(Link borrowed from Phateless's .sig)
jggimi said:
You can "restart my phone again" -- is it running Android at that point? If so, you can restore your phone to stock, and do a full factory reset, by putting the P15IMG.zip file on the root of your SD card and rebooting. The bootloader (if it is functional) should find it and begin the restore procedure.
Dowload, rename this, and stick it on your SD card, and reboot. If after a successful return to factory defaults, your phone still isn't working, the problem is likely not software.
http://www.filedropper.com/pd15imgglaciertmous1175312radio1228b60140e26030226mrelease155771signed
(Link borrowed from Phateless's .sig)
Click to expand...
Click to collapse
I can't download it...need new link
anyway thank very much for your help
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
This is a painful message to write, but I am desparate. This should be so simple!
Have a U8800 standard (at least it says only "U8800" in settings/about phone.
What have I done:
- Upgraded some time ago to 2.3.5 Rev B522 from Huawei.
- Then rooted it with SuperOneClick.
- Installed ClockWorkMod from Play Store.
- Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
- Turned off Fast boot under settings/applications
:: What worked/happened.
- Rooting went fine, ES file explorer and others get root-permissions ok.
- But got into CWMRecovery only via CWM program (Choosing "Reboot into recovery"). Never with the holding buttons vol+ and power-button during power-on.
Figured it was that locked bootloader on B522 that was the problem.
What I did:
- Followed the instructions in http://forum.xda-developers.com/showthread.php?t=1457490 (Get your pink screen back).
- In CWM Recovery flashed "update-B518-bootloader.zip".
- Got "ok installed or something to that effect" from CWM Recovery.
:: What worked/happened.
- Still could not get into CWMRecovery via button-holding. Tried reflashing the B518 bootloader a few times, but just no difference.
Read somewhere that each Huawei firmware-release comes with it's own bootloader, so lets try to install Huawei B518.
- Only place I could find the image was here http://huaweiideosx5.blogspot.no/2012/03/u8800-b518-23-software.html
- U8800V100R001C00B518G001.zip
- Had to take out the external SD-card to get the /sdcard/dload directory on the internal SD-card.
-Seems to be important to have dload on the internal SD-card and not the external.
- Booting the phone with vol+, vol-, power did not start the downgrade, but was able to trigger it via settings/storage/software upgrade.
After downgrade to B518 (Checked version in settings/about phone):
- Deleted /sdcard/dload directory.
- Rooted with SuperOneClick
- Installed ClockWorkMod from play store again.
- Put CWM Recovery 5.5.0.4 into ./cust_backup/image again (think this was unecessary. I think it was already there but did it anyways)
- Turned off Fast boot under settings/applications.
:: What worked/happened.
- The phone is now in B518 software, but still can not get into CWM Recovery via keypressing at boot.
I hold the vol+ and power-buttons all the way to "desktop" so to say, but can not for the life of me get into CWM Recovery that way. Getting into CWM recovery 5.5.0.4 via instructing CWM application to boot into recovery works fine, though.
I am drooling at the thought of ICS Aurora, but I don't dare before I can reliably get into CWM Recovery via keypress.
Sorry if this is very stupid post, but I have tried so much.
Maybe the volume buttons are faulty? Turn off the phone and try this: hold down volume up; while holding press power button as long as the logo comes up. Release power button but continue holding volume up. If it did not work, try doing same with volume down.
Yeah, do what Blefish advised you but do it while the phone is off and charging. I have a kinda broken power key and with this 'trick' it boots faster and more reliable. Keep holding the 3 buttons until you see the recovery.
Sent from my U8800
Thank you both for trying to help me here!
Unfortunately I have had no luck with your suggestions.
Re: Broken keys.
Power and volume-buttons seems to work well when the phone is on. Also when I boot into recovery through the CWM program, navigate to advanced/key-test, the vol+, vol- and power button seems to work well there too.
On pressing the power-button, CWM-R reports Key: 116
On pressing the vol+-button, CWM-R reports Key: 115
On pressing the vol--button, CWM-R reports Key: 114
So I think the keys must be ok, right?
Blefish: I did what you suggested, as I understood it.
When the phone boots, there are three stages of logos.
1. A static logo of Huawei's red "fan?".
2. A short "comet" animation.
3. An animated logo of Huawei's "fan", where some highlight flashes from left to right over the fan.
I hold the power-button in until I see the first static logo, then let go of the power-button and hold the volume-key(s).
Is this the same stage in the boot-process that you were thinking of?
I have tried vol+, vol- and both vol+ and vol-, together with releasing the power-button at that point.
Have not had any success with that, and ended on the "desktop" each time.
AceDroidX: I tried your suggestion as well.
I did this:
1. Shut down the telephone
2. Plugged in the power.
3. A "fan"-logo appears which is replaced by an animated battery.
4. Upon seeing the animated battery, I tried the various key-hold variants.
- vol+ and power : Ended up at desktop.
- vol- and power : Ended up at desktop.
- vol+ and vol- and power : Ended up at desktop.
So not much success either.
I am out of ideas... Can it be that B522 bootloader that still lingers in there, not replaced by installing the B518 software?
Well, idk what else to suggest.. Maybe your problem is here?
Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
Click to expand...
Click to collapse
I remember that when i mount my phone in linux, there was a partition with just the image folder. Some files like boot.img and recovery.img where there. Try to put the recovery image in there and see if it makes any difference.
I'd like see your versioninfo, can you upload a screenshot?
You can check mine from B528
AceDroidX: When I use Remount, I am able to mount that partition as read/write so that I can copy CWM's Recovery image in there. I think it is identical as mounting it up remotely, as you do. I am after all able to boot into CWM-Recovery, just not by key-pressing? I suppose I could boot into Linux and try to mount up the partitions as you do.
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Treq01 said:
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Click to expand...
Click to collapse
You have to dial *#*#2846579#*#*
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Treq01 said:
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Click to expand...
Click to collapse
Based on the screenshots your installation is fine.
Just one last shoot based on what AceDroidX says, with phone off press Vol+ and hold then connect USB cable to PC or charger and stay holding Vol+ then wait...wait and what you see?
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Wow.. It is hard to believe.. but I have actually ... eventually found a way to get into that CWM-Recovery every time.
It is a combination of your suggestions.
I have been doing variations, trying to figure something out and eventually there is a method.
What I must do, on this phone, in order to get into CWM-R is this:
1. If the charging cable is in, then unplug first.
2. Turn the phone off.
3. Take out the battery and put it back in.
- This makes a difference on my phone, at least. I am not able to get into CWM-R wihtout taking the battery out first.
4. Press and hold Vol+
5. With Vol+ being pressed continously, insert the charging-cable.
6. Wait for the Fan-animation to finish and the "battery-charging" animation to start.
7. When the battery-charging animation is running and the screen eventually goes black, keep holding the Vol+ button for some time.
- Sometimes it works to keep holding the Vol+ button for only a second or two. Sometimes I must hold it up to 30 seconds.
7. Press and hold the power-button in addition to the Vol+
8. Wait for CWM-Recovery to start.
Thank you very much for your help.
Now I think I can try for ICS!
imsonica said:
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Click to expand...
Click to collapse
Try Vol- and Power ON