Database Users

Instructions for Dell Streak ATT Users

I figured I'd return the favor for this forums help by writing a few steps I cobbled together from being a n00b to android and making my Dell Streak from a 0 to hero! I wanted to replace my iPhone4 and I was so excited to get the streak only to find out it had 1.6 and was lame! Slow, laggy, no tethering, it was gonna go back to where I bought it till now..
Here is what I did to make it work.
First off, the XP Driver issue OMG what a nightmare, Keep in mind I'm a 15 yr IT Veteran and I blew up one of my desktops..
So here is what I did. UNINSATLL ANY AND ALL DRIVERS if you have any.
First install the fast boot drivers using the drivers from the Dell found here.
To install, put the streak in Fastboot mode, Pull battery put back in, put back cover on, Press the power button for 2 secs, then hold down the camera button till you get a white screen, Touch FASTBOOT, then plug into your computer, Tell it NO do not search, next screen, Middle Check box "search in this folder" Browse to the the Dell driver directory.
Next install the Qalcom diagnostic driver using this video and the drivers from the QDLTool.
Now once you have all that ready, You may now proceed to install the QDLTool froyo 2.2 image
Next I rooted it using SuperOneClick found Here (version 1.5.5), this will allow the next step to work.
Next I installed SETCPU found here to later have some overclocking fun and make this thing scream. Just copy the .APK to your streak and download an Application loader from the marketplace instead of using fastboot or other complicated things. (i used "Quick App Install")
Then I installed Clockwork Recovery using these directions. The one thing not mentioned was how to get into it.
(dont do this yet)
To get into clock work, pull battery, turn on holding Volume down and power
Also I noticed the camera button is used to "select" you gotta push like hell on it if its a new streak.
Copy the performance mod/update 309 from this Thread to your root folder of your Streaks SD Card and rename it to update.zip.
pull battery (or hold Power and Camera to get the shutdown menu in android)
Boot up into clockwork and select update using update.zip (volume buttons move selection up and down and camera to select, remember push like hell on the camera button, any other button will shut the screen off, just press it again to get the screen back) Run the update. then select reboot...
You should have a Pretty Badass Stock Dell system
EDIT:
I just wanted to do a basic brain dump of the past week i've spent tracking down this stuff I'll continue to edit and add links that I found the most useful.
Everything is in the forum, but there is no order on how to do things..
Thanks to all and Streakdroid.com

stang393 said:
...
Then I installed Clockwork Recovery using these directions. The one thing not mentioned was how to get into it.
...
Click to expand...
Click to collapse
What directions? I've been looking all over the place for where to download and install it but coming up empty

You'll find copies of both clockworkmod and streakmod in the downloads section on streakdroid.com.
As for installing, you'll need a copy of fastboot. If you've used QDLTool in the past then it has a copy of fastboot in the same folder.
Extract the recovery image (I prefer streakmod, so the recovery image name is "recovery.img") into the same directory as fastboot.
Shut down your Streak, then hold down the camera button all the way whilst turning on the Streak. When the screen turns white, press the 'Fastboot' option in the top right corner of the screen. When you plug in the USB cable, it should say 'FASTBOOT_MODE'. If it doesn't change, you may have to install the ADB drivers.
You then need to running the following command to install the new recovery:
fastboot -i 0x413c flash recovery recovery.img
(Change recovery.img to the name of the recovery image)
You can then run this command to reboot the Streak:
fastboot -i 0x413c reboot
As the phone reboots, hold down both volume buttons to enter the recovery menu. Select option 2 (Upgrade) to start the new recovery image. If you are using StreakMod, press either power or menu when the screen with the dell logo and exclamation mark shows, to open the main menu.
Enjoy.
~meralias

ok noob alert...the OP mentioned he was disappointed when he saw the dell streak had 1.6 and was lame...what is 1.6? the version of the OS?
edit: nvm...found out it is the OS

You might want to tell people when loading thru the qdltool that they have to wait and it will EVENTUALY boot into 2.2
I didn't know this and couldn't find anywhere it says what its supposed to do. I thought I was just using the tool to load something else on and and after a few tries, it just booted into something.
Sent from my Dell Streak using Tapatalk

Reel E. Weird said:
ok noob alert...the OP mentioned he was disappointed when he saw the dell streak had 1.6 and was lame...what is 1.6? the version of the OS?
edit: nvm...found out it is the OS
Click to expand...
Click to collapse
Yes 1.6 is android 1.6, opposed to 2.2

[Q] update GT540 from 1.6 to 2.1

Hi, I'm a newbie. I want to upgrade the OS of my GT540 phone from Android 1.6 to 2.1 but I'm not sure what to do. I read some posts but some of the technical terms like fastboot and rooting are new to me. I already downloaded the drivers and kdz files. Help please?

alexamuna said:
Hi, I'm a newbie. I want to upgrade the OS of my GT540 phone from Android 1.6 to 2.1 but I'm not sure what to do. I read some posts but some of the technical terms like fastboot and rooting are new to me. I already downloaded the drivers and kdz files. Help please?
Click to expand...
Click to collapse
Copied from other thread
Hi,
UPGRADE
1.backup anything on the phone itself
2.download the updater package and extract to your desktop
3.run LG Driver.exe and install
4.on phone go to settings>applications>development and tick usb debugging
5.right click on windows enabler.exe and click run as administrator
5.do the same for KDZ_FW_UPD.exe
6.at the bottom right of your pc screen click on the windows enabler icon so it will say "on"
7.on the KDZ click the dropdown box at the top and it will enable, then click again and select 3GQCT
8.leave the next one. click the browse button to enable then click the folder icon next to it and find your .kdz file
9.plug in your phone but dont mount sd card
10.click the button under browse to start installing.i suggest that you close all other windows except this and stop any antivirus scans that slow your pc down
11.wait until your phone restarts completely and the lock screen comes up, now you can unplug your phone.
links:
updater package ht*p://www.mediafire.com/?sdy95t16nex2yeo
2.1 original rom ht*p://www.mediafire.com/?y7q20212djy40ap
[change * to t]
That was for android 2.1 with fastboot, if you just want the upgrade to 2.1 then your done.
If not, the next step is to get clockwork recovery
Clockwork Recovery v 2.5.0.5
1.repeat steps 5-11 of UPGRADE with Clockwork recovery rom.kdz file
2.once the Clockwork recovery rom.kdz file has been installed switch off your phone
3.download android sdk off android developers website and extract into your C drive
4.then right-click on My Computer, and select Properties. Under the Advanced tab, hit the Environment Variables button, and in the dialog that comes up, double-click on Path (in System Variables box). Add C:\<androidsdk>\tools\; directory to the path.
5.get your phone and if its on turn it off. hold power button and camera button until the lg logo goes and screen is black
6.plug your phone into your pc while its on the black screen and open cmd
7.download recovery.img and place in C drive
8.in cmd type: fastboot.exe flash recovery C:\recovery.img then press enter. it should say OKAY twice. reply if there is a problem
9.unplug and take out battery then place it back in
links:
Clockwork recovery rom ht*p://www.mediafire.com/?4r5n1cj5v49151p
recover.img ht*p://www.mediafire.com/?zak0q95fgemo8mp
[change * to t]
if you want to have clockwork with original 2.1 rom then repeat steps 5-11 from UPGRADE with the first .kdz file
if you want the black quarx 2.1 then carry on reading.
Black Quarx ROM
1.get your phone and if its on turn it off. hold power button and camera button until the lg logo goes and screen is black
2.download black system.7z and extract to your desktop
3.and run flash.cmd as administrator then plug in your phone whilst its screen is black.
4.it should start executing commands.if it still says "waiting for device" then post a reply.
5.the phone will automatically reboot when finished. it may take long to reboot but its not like that normally, its just got a lot to load.
links:
ht*p://rghost.net/2898235
[change * to t]
how to use clockworks recovery
when phone is off, press and hold power and home button to switch on in clockworks recovery mode.
to scroll up or down use volume buttons.
to select press call button.
to cancel or go back press end call button.

DONT DO THIS
If you follow this, and flash with fastboot rom, you cannot flash anymore with original rom.
For now I suggest that you flash with original rom only.

Legend Won't Boot to Recovery

Hey guys,
I'm trying to boot into recovery mode on my Legend, but I've had no success as of now. I've tried using Rom Manager to boot to recovery and I've tried backing up my current Rom as well, but all I get is a phone with a red exclamation mark beside it. I've tried booting into fastboot, (Holding down the volume down button and power button) and hit the "Recovery" button, but still no luck. Any solutions would be greatly appreciated. Thanks guys.
PS: Sorry for posting two threads in two days.
EDIT: Solved. For those having a similar problem, all I had to do was run the recovery once from my PC using the file "Recovery-windows" in the Legend tools. It had to push the recovery files into my Legend again because I factory reset it a couple weeks ago. I've been trying to fix it for hours, love getting to the bottom of things.

This also works:
When you get to the red triangle of doom press volume up and power. Then using the volume buttons to navigate and the power button to select choose "install update.zip" (something like that, I honestly can't remember what of actually says) then observe as your phone ends up in recovery.
Sent from my GT-P1000 using XDA App

Hi,
I am new to HTC legend. I have a similar problem, can you please tell me what uyou refer to by "run the recovery once from my PC using the file "Recovery-windows" in the Legend tools." What program is that and how do I get it?
Thanks in advance.

Collectric: have you tried holding the volume up button and then pressing the power button?
For me it takes a few moments of pressing power but then a green box appears and i can move on.
Sent from my Legend using XDA App

Of course I pressed power and volume down, that's basic.
Unfortunately, I made a stupid mistake and tried to replace the recovery file using
http://forum.xda-developers.com/showthread.php?t=833423
which was prepare for Samsung phone (having the naive thought that Android is the same Android for every one ).
Since then I lost the possibility to go into recovery mode, and the author of the above mentioned program is not answering me, so now I am tryoing to look for a way to "recover" recovery mode ....
Thanks anyhow...

Well when I rooted my phone with theunlockr.com they gave us a legend tools folder and it has the recovery tools to push the recovery files into the phone which worked for me and I can then go into recovery freely I'll give you the link soon.
Sent from my Legend using Tapatalk
EDIT: Okay here it is http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/ make sure you download ONLY the "Legend Rooting Tools" and ONLY that you don't need anything else. Unzip the Legend Root Folder in the root of C:/ Also please do not follow the steps they mentioned as your phone is already rooted.
Here are the steps you should do:
1. Unzip the Legend Root Folder to "C:/"
2. Go to the folder in the "C:/" it should be called "R4-legend-root"
3. Put your phone in recovery mode using the power + volume down and click recovery in the PHONE not the PC.
4. When you're on the red triangle of doom (Make sure you are!) click "Recovery-windows" in the PC (Again located in the r4-legend-root folder which you unzipped)
5. A black box should come up pushing the files to your phone
6. Your phone should be in recovery mode
7. You can now go into recovery mode freely using ROM Manager instead of the computer like I do.
PS: Sorry for the late reply I was off on vacation.

Many thanks man, no need to apologize...
Well, the whole point is that strangely enough I CAN'T go into recovery mode on my phone...
Since that stupid act of trying to work with the Samsung program, when I press power and volume down I get into "Factory mode" which gives me the options to test my device, clear the flash and Reboot.
I don't even have the option to go into recovery mode...
I can try and copy all those files manually, as my phone is rooted. I will copy the files from PC into my SD then move them with my phone "total commander" into the proper folders in the root flash.
Does it sound like a plan?
Thanks again

Hi,
As you probably guessed, root is read only, so I met a dead end. I have no way to go into recovery mode thus can't replace any file in root.
I tried to reboot to recovery using "adb reboot recovery", the phone reboots and get stuck with green HTC on the screen - I had to remove battery, put back, press power with volume down to enter "Factory mode", select reboot and get again normal operation.
Any innovative idea?
Thanks in advance...

Maybe you can try to reroot your phone using the unlockr.com method. But I'm not a specialist at these kinds of issues, I wish to be more help. But is there any you can try to reroot your phone using theunlockr.com method?

Yes, I am working on it but I am not so optimistic as, on the way, they also instruct to go into recovery mode. Anyhow, till I discover something better I'll give it a shot.
Many thanks on your assistance.

As I suspected, its a vicious circle, all the repair methods eventually end in the recovery mode. To recover recovery mode I have to go into recovery mode - sad but seems to be true. I will try to open a new thread maybe there is some Android sage with some trick in the sleeve for me....
Thanks again

I'm sorry I couldn't be of help. If you do manage to get it fixed please tell me how you did it because it would be very useful to know recovery mode is essential for every phone. Thank you and sorry again.
Sent from my Legend using Tapatalk

HTC Legend doesn't boot into recovery even after pushing recovery files through PC
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.

asifisbest said:
Hi guys, I have a rooted HTC Legend and was trying a new ROM "New Sense ROM" and after I installed it, I am not able to root into recovery mode even the ROM Manager says "Successfully installed Clockwork Mod Recovery". It gets stuck at /!\ Red Exclamation Mark. I tried pushing recovery files to phone using PC from 'r4-legend-root' folder which I got from www.theunlockr.com but it simply doesn't woirk. What may be the problem? Please Help.
Click to expand...
Click to collapse
when at the /!\ screen press; volume + and powerbutton, and see if that helps

I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.

adrianwallis said:
I had a problem with the red exclamation mark when trying to load the recovery image on my phone after rooting with the method on theunlockr.com.
To solve it download a recovery image from here, rename it "update.zip" and placed it in the root of your sdcard.
Then boot up your phone and attempt to load recovery as before by pressing the power button and volume DOWN. When you get to the red exclamation mark screen, press and hold volume UP and the power button. This should bring up the Android system recovery. Select flash update.zip and this will flash and load the recovery image.
See here.
Click to expand...
Click to collapse
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!

chongyixiong said:
Hey, I've been doing this for few months now every time I need to enter recovery after I recovered from a bootloop for installing CM7.
However, is there a way to permanently remove this 'wrong' feature by having to manually click update.zip every time? Can I just restore my Legend back to the original state where it would automatically enter recovery without having to press "Vol Up + Power Button" combo and applying update.zip?
Thanks!
Click to expand...
Click to collapse
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.

adrianwallis said:
If you look at the top line of the bootloader screen it will have the phrase
'S-ON' somewhere; this means 'security on'. The result is that the /system and /recovery partitions are read-only.
There are instructions here on how to S-OFF the Legend. (xda discussion thread here)
I haven't done it myself. Personally, I felt that the risks of bricking and the time spent researching and doing it outweighed the benefits of a writeable /system and /recovery partition.
Click to expand...
Click to collapse
So are you saying that this "extra step" resulted from the fact that my phone is still S-ON? If that is so, I guess the benefits of this read-only system allows me to flash ROMs much easier (without having to connect to ADB).
Thanks!

I'm not sure if this is gonna help, but you can try pressing the "BACK" button while pressing power on?

Stepwise guidance to your dell streak official gingerbread 2.3.3 upgrade 407 ROM

1. download repairtool.zip from http://downloads.streakdroid.com/djsteve/
2. select the driver from this folder after unzipping repairtool, while updating the dell streak usb driver in your PC
3. then download the recovery image of 407 from the following link http://forum.xda-developers.com/wiki...treak#Official
4. download update package 407 from same link.
5. download multirecovery flasher " http://www.4shared.com/file/p22LB2uD/MultiRecoveryFlasherv051.html" and unzip it in c:\ drive
6. rename the update package into update.pkg if its in other name
7. place that update.pkg into sd card and recovery.img into the multirecovery flasher folder and name that multirecovery flasher into some easy name like "streak".
8. then make sure that dell streak is recognized in your computer
9. then turn your dell streak off and wait for 5 sec and then press power button as well as camera button at the same time and it will show a white screen with fastboot option on the right top side
10. then wait untill there is a msg like, 'waiting for fastboot device'
11. wait for 10secs and then plug your usb cable of dell streak into your computer.
12. wait for fastboot mode_ txt.
13. then go to the command prompt in your computer (press start-accessories-command prompt)
14. then type ('"c:\.......) cd\ " )
15. then type (" c:\)cd streak ")
16. then type ("c:\streak)fastboot -i 0x413c flash recovery recovery.img ")
17. press enter, and wait untill success report pops up.
18. then type ("c:\streak)fastboot -i 0x413c reboot "")
19. dont let the phone reboot instantly press both volume up and down as well as the power button at once
20. then phone will turn on in recovery mode
21. select option "2. upgrade rom from update.pkg from sdcard option" with the help of volume down key and press camera button to start then press camera button after a confirmation option screen is displayed then wait untill updated and there will be bit delay to open to home screen dont freak out
22. done you are using a olleh 2.3.3. rom

thank you for this useful post. it is a big help for us dell streak owners
can you please add to your post how to get rid of blinking/flashing led lights (menu, home, back) because some of us have this kind of problem after flashing stock 407 olleh rom. thank you!

Reply
I had such a blinks while i did for the first time upgrading to custom ROM but it blinked for just 3 times twice thats all. If you follow my steps to upgrade the ROM i hope it wont blink and wont have any problem for any one. Because i spend lots of time and collected all the information needed to upgrade my streak. I did researched for whole one day to find the dell streak ADB driver and collected all the steps that is easy to help other fellow mates to have a recent upgrade to their Dell Streak.
And I formatted my dell streak with same steps for like more than 6 times already and never had any problem. And couple of time i did with the streakmod and didnt had problem as well. I think this is the easy and detailed information to upgrade to gingerbread 2.3.3 without any problem. I saw lots of problems and lack of information in others post. So, i decided to post a detail and easier steps so mates with dell streak can enjoy the gingerbread 2.3.3
All the best guys with upgrading

therakez said:
1. download repairtool.zip from http://downloads.streakdroid.com/djsteve/
2. select the driver from this folder after unzipping repairtool, while updating the dell streak usb driver in your PC
3. then download the recovery image of 407 from the following link http://forum.xda-developers.com/wiki...treak#Official
4. download update package 407 from same link.
5. download multirecovery flasher " http://www.4shared.com/file/p22LB2uD/MultiRecoveryFlasherv051.html" and unzip it in c:\ drive
6. rename the update package into update.pkg if its in other name
7. place that update.pkg into sd card and recovery.img into the multirecovery flasher folder and name that multirecovery flasher into some easy name like "streak".
8. then make sure that dell streak is recognized in your computer
9. then turn your dell streak off and wait for 5 sec and then press power button as well as camera button at the same time and it will show a white screen with fastboot option on the right top side
10. then wait untill there is a msg like, 'waiting for fastboot device'
11. wait for 10secs and then plug your usb cable of dell streak into your computer.
12. wait for fastboot mode_ txt.
13. then go to the command prompt in your computer (press start-accessories-command prompt)
14. then type ('"c:\.......) cd\ " )
15. then type (" c:\)cd streak ")
16. then type ("c:\streak)fastboot -i 0x413c flash recovery recovery.img ")
17. press enter, and wait untill success report pops up.
18. then type ("c:\streak)fastboot -i 0x413c reboot "")
19. dont let the phone reboot instantly press both volume up and down as well as the power button at once
20. then phone will turn on in recovery mode
21. select option "2. upgrade rom from update.pkg from sdcard option" with the help of volume down key and press camera button to start then press camera button after a confirmation option screen is displayed then wait untill updated and there will be bit delay to open to home screen dont freak out
22. done you are using a olleh 2.3.3. rom
Click to expand...
Click to collapse
Sent from my Dell Streak using XDA App

6. rename the update package into update.pkg if its in other name
which file has to be renamed

thank you this is an informative post.

when you download the update package from http://forum.xda-developers.com/wiki...treak#Official, it should be named as update.pkg

is it possible to install it on all dell streak 5 devices like unlock versions? my device region is 00 , can i install it on my device?

I think the flashing led's is becUse of a mismatch in baseband and rom ( i think) deffo a mismatch of something
Sent from my Dell Streak using xda premium

Hi is there any video tutorial as i am finding this a bit difficult.Anyone please do help me with installation of gingerbread.Thanks in advance

You can find some of the videos to upgrade in youtube search for it and go for it

accepted the love of many because it helps .... good job ...

im an amatuer wid android n after all the hesitations i had to upgrade . finally did it...
thanks to ur step by step procedure...i got stuck in ur step 5 6 and 7..
i found out a simplier version for those who dint understand that ..if it is of any help
Press Shift key and from right click menu on anywhere on the folder (on empty space without selecting any files or folders) open a DOS command window on that folder. Or Start menu > Programs > Accessories > Command Prompt.
Now type 'cd C:\streak'. Type "dir" and you should see all the files and folders in C:\streak. Type 'fastboot' and you should see a list of command options.
type 'fastboot -i 0x413c flash recovery recovery.img' without the quotes and hit enter. You can see that your DS screen shows the response. (Make sure that the DS white screen says 'download done' or something like that.)
type 'fastboot -i 0x413c reboot' without the quotes and hit enter. This will reboot your phone. Now on rebooting, immediately enter to recovery mod (hold both volume buttons while powering on).

thanks for the fabulous tutorial..
so far gingerbread looks nice ... BUT after upgrading my speakers volume went way too low how can i fix this...with froyo were pretty loud and clear.. please help...
Ignore this post! a reboot fixed the issue

Best installation Step for Any Rooted Dell Streak regardless the region
YES!!!, YOU HEARD ME RIGHT, WITHOUT USING ANY RECOVERY, WORKS FOR ANY, AGAIN ANY ROOTED DELL STREAK 5 REGARDLESS YOUR REGION...
1. Download Multi Recovery flasher.
2. Download the Streak_407_20707_14.pkg, yeap! Recovery image not needed
3. ...now rename the PKG file to Update.pkg and copy to the root of your SD card.
4. ALSO, create a folder name LOST.DIR , all uppercase... in the root of your SD care, if there is one there already skip this step.
5. now restart your Dell streak and hold the volume up and down button to get to recovery menu. choose 2nd menu i.e “Software upgrade via Update.pkg on SD card” and press the power button.
6. Now the decryption process. It gonna attempt to install the update and hence fail. Don't freak out. Now boot to phone normally and connect it to your PC. access your SD card and go to the LOST.DIR folder, you should see a white file with no extension with a randon digit name. example 553, file type - "file" (decrypted pkg file)
7. Now rename this white file to Update.zip, then copy it to the root of your SD card.
8. Now shutdown your Dell streak and boot to fastboot i.e power button and camera button, it should take you to the famous white page. flash Streakmod recovery using the Muitl-Recovery flasher you downloaded.
9. Phone should restart at this point, hold Volume up and down button to get to recovery menu...select Select upgrade via Update.pkg on SD card and press the power button again, this time you should get to black screen with dell logo and a caution sign.
10. Select update Zip from SD, select choose Zip from list...scroll to the "Update.Zip" and select that..installation should commence and with 10 minute you are running Olleh Gingerbread. Factory reset and select English at the first time android screen ( click language at lower right hand of the screen)
11. Leave many thanks if this works...let me know if you have any questions

http://forum.pocketables.net/showthread.php?t=9694

Hey Radimus...
Did you know that you could decrypt .PKG files and convert them to .Zip file so they are flash-able through Streakmod recovery? I figured out the trick through my dell streak... it works.

gingerbread upgrade
Hi,
Thanks for the post.
Please help me as I got stuck and my display shows wait for usb fast boot detect..........
now what to do.....

If thats the case, then it means you need to install dell android adb driver on your pc so your pc can detect your dell streak through the multi-recovery flasher. Search on google for it...or check dell.com technical help for handheld devices...you should find it there as well.

How can u decrypt a pkg file to a zip file
Sent from my Dell Streak using xda premium

[SERIOUS HELP] My Nexus One cannot reboot

My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.

Turn it off. Hold the trackball while starting it up. If you have usb debugging on and working fastboot drivers, you can wipe your phone (fastboot -a in cmd) and flash an img file of like a stock ROM.
Sent from my Nexus One using Tapatalk

Thanks Theshawty, donno why my Nexus One can't even boot up now

wingod513 said:
Thanks Theshawty, donno why my Nexus One can't even boot up now
Click to expand...
Click to collapse
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.

wingod513 said:
My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.
Click to expand...
Click to collapse
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip

taodan said:
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.
Click to expand...
Click to collapse
I tried this already but still not work, I had brought my phone to some third party mobile repair centre, they said my N1 is CPU broken and will cost around US$96 to replace with a new CPU (HTC need around US$190 for mother board). I paid US$96 anyways. not sure if it worth.
cnalbant said:
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
Click to expand...
Click to collapse
Thanks, I will try this after my phone get fixed.

cnalbant said:
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
Click to expand...
Click to collapse
These links not working, please help me update. thanks

are you sure you just didn't lose your recovery

rugmankc said:
are you sure you just didn't lose your recovery
Click to expand...
Click to collapse
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium

wingod513 said:
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.

race55 said:
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.
Click to expand...
Click to collapse
The bootloader of my N1 is unlocked, I am not familiar with fastboot thing. My friend helped mine root and he is out of my country now. Gotta follow cnalbant's steps and see.

Install ClockworkMod Recovery on Nexus One Manually
Step 1: Download ClockworkMod Recovery: recovery-clockwork-2.5.1.1-passion.img (there are more current, look at the xda)
Step 2: Set up ADB for Nexus One
Step 3: Put the downloaded recovery-clockwork-2.5.1.1-passion.img in C: drive
Step 4: Turn Nexus One off and connect it to PC via USB
Step 5: Hold the Power button + Trackball together to start Nexus One in fastboot mode
Step 6: Once in fastboot mode, open Terminal / Command Prompt and run following command:
fastboot devices
This command will check if your device is connected in fastboot mode or not.
Step 7: Now run following command (place the file recovery in the same folder where the fastboot):
fastboot flash recovery recovery-clockwork-2.5.1.1-passion.img
This will install Clockwork recovery on your Nexus One.
That’s it, enjoy!

You can either follow the above guide or this amon ra recovery guide
forum.xda-developers.com/wiki/HTC_Nexus_One/Recovery_Images
Amon ra is another recovery just like clock workmod
B4 using adb download the drivers of adb and fastboot
www.mediafire.com/?bhxmn903d6cz9eg
When you connect ur phone use device manager to locate the connection on win 7 and select install drivers frm folder and install frm the extracted folder of adb driver
Sent from my HTC Nexus One using XDA