i have flashed everything right hspl3 radio 2.15.50.14 magldr1.1.3
then cwm recovery and cm7
at first the device works fine then it freezed i didn't know what to
do then i fliped the battery out and then put in back in then i feel the first 1
vibrate then it doesn't do any thing i tried going to bootloader but can't
Holding the up volume didn't get you into boot loader?
maybe the battery is dead?
Sent from my HTC HD2 using XDA App
i tried didin't help
What Rom have you installed?
Can you boot into magldr? Turn it on and keep hold of the power button, scroll to recovery, once in cwm click wipe data/factory reset then boot
Sent from my HTC HD2 using XDA App
khaled1994 said:
i tried didin't help
Click to expand...
Click to collapse
Hi
Try going to CWM 8. ad recovery and wipe data,cache partition,and dalvik(advanced).
malybru said:
Hi
Try going to CWM 8. ad recovery and wipe data,cache partition,and dalvik(advanced).
Click to expand...
Click to collapse
it doesn't even turn on so i can't boot into magldr
hspl3???
no man, you was needing 2.08 hspl....
pirlano said:
hspl3???
no man, you was needing 2.08 hspl....
Click to expand...
Click to collapse
Hspl3 is 2.08
Sent from my HTC HD2 using XDA Premium App
please someone help
By holding vol down and power you can't get into bootloader?
Sent from my HTC HD2 using XDA Premium App
whynot66 said:
By holding vol down and power you can't get into bootloader?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
no i can't
FriedSushi87 said:
Holding the up volume didn't get you into boot loader?
maybe the battery is dead?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Press Vol down + Power to enter bootloader
No press vol up + Power
Can fix if your phone can power on or enter bootloader, but hard brick if your phone do not power on!
Please charge your battery before do this. My HD2 also got error when the battery finish during flash nearly 100%. it got to soft brick. But now is ok after do mtty 1.42. please search the forum for this guide.
If your phone is not detect your battery to the AC, Please find another way to charge your battery. To make sure your batter is full or at least 50%.
Thanks
Hmm, maybe try reading this: http://forum.xda-developers.com/showthread.php?t=668347 'this method only works if you succesfully flashed HSPL before'
dawid. said:
Hmm, maybe try reading this: http://forum.xda-developers.com/showthread.php?t=668347 'this method only works if you succesfully flashed HSPL before'
Click to expand...
Click to collapse
i cant power on the device so i cant go
to bootloader
khaled1994 said:
i cant power on the device so i cant go
to bootloader
Click to expand...
Click to collapse
D'oh! Sorry my bad. I guess that there is nothing you can do :/
Send it back if it's on warranty just say it stopped working
If it's not on warranty then here is cheap (I think it cheap lol, haven't looked for anything cheaper maybe ebay has cheaper services) HD2 unbricking: http://www.mobiletechvideos.com/blog/?page_id=785 $50 + free RETURN shipping.
EDIT: haven't found anything cheaper on ebay :http://cgi.ebay.com/HTC-HD2-JTAG-Un...ultDomain_0&hash=item2565494109#ht_652wt_1059 but it's for $60.00
Free shipping
Your device stopped working after you have removed the battery.
Probably a bent pin or something .
Marvlesz said:
Your device stopped working after you have removed the battery.
Probably a bent pin or something .
Click to expand...
Click to collapse
can u tell me how can i fix that
Remove the battery, put it back in and hold the volume up+down rockers at the same time, then it should restore, if not you're holding a paperweight
Being Cool from my HTC G2 running CM7
can someone please help me revive my phone
turphed said:
Remove the battery, put it back in and hold the volume up+down rockers at the same time, then it should restore, if not you're holding a paperweight
Being Cool from my HTC G2 running CM7
Click to expand...
Click to collapse
i can't turn on the phone
Related
[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU
HELLO ALL,
I USED THIS LINK http://forum.xda-developers.com/showthread.php?t=858996
TO ROOT MY MY TOUCH 4G PHONE AND IT WORKED FINE UNTIL I ATTEMPT TO INSTALL OVERCLOCKING SOFTWARE FROM>>>
http://theunlockr.com/2010/12/14/ho...ted-s-off-t-mobile-mytouch-4g-or-t-mobile-g2/
AND AFTER DOING WHAT THEU SAID MY PHONE JUST ACTED CRAZY/
EVERYTIME I TRIED TO TURN THE PHONE ON IT VIBRATES CONTINUESLY AND NEVER GETS TO THE OS. SO I LEFT IT ON FOR NIGHT LIKE THAT AND I WOKE UP IN THE MORNING OBVIOUSLY BETTERY WAS COMPLETLY DRAINED ( AFTER ALL THE VIBRATING BACK AND FORTH)
ANYWAYS, NOW IT JUST TURNS ON AND STAYS AT " MY TOUCH 4G SCREEN WHERE ITS WHITE AND THAT WRITING" IT JUST FREEZES.
IF I TRY TO HOLD VOL DOWN AND CLICK POWER BUTTON, I GET TO THE PAGE WHERE ITS WHITE AND FASTBOOT, RECOVERY, FACTORY RESET,SIMLUCK,IMAGE CRC MENU.
I HAVE TRIED EVERYTHING IN THAT MENU INLUDING FACTORY RESET, NOTTING WORKS.
WHEN I ALSO TRY RECOVERY FROM THERE I CAN GET TO "ClockMod Recovery" BUT I CANT EVEN ACCES INSTALL ZIP FROM SDCARD, WHEN I TRY THAT ALL I SEE IS A BLACK SCREEN AND A HAT AND A BIG EYE UNDER IT.
THIS IS SO FRUSTRATING,
Step one, slow down
step two, turn off the caps.
Step three it's obvious that you have s=off if you have clockwork ROM on your phone.
At the top of your phone What recovery image do you have? 3.0.0.5? or a 2.x one?
thank you for responding, I have v3.0.0.5 version
i have v3.0.0.5 version
ilkercatal said:
i have v3.0.0.5 version
Click to expand...
Click to collapse
as long as you do not have any errors on your recovery image about not being able to mount anything....to get your phone working you can do one of two things.
1)You can flash any Gingerbread based ROM either from Cyanogen(mod) or from TeamRoyal. Those all can be found in our Development section from your recovery image.
2) you can flash the PD15IMG and restore you phone back to 100% via the HBoot (engineering) screen, that can be found in our development section as well.
no luck
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
You can also check the semi brick thread in here. There is a link to a nice guide to revert back to stock. Exact same issue!
Sent from my HTC Glacier using XDA App
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
when you select something you need to select it with the track pad. If you use the power button you'll get the text will disappear.
the only way you can use ADB to flash stuff is if you have the engineering bootloader. If you just followed TheUnlockr's method then you do not have it.
i use volume buttons and power button to select it
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
ilkercatal said:
i use volume buttons and power button to select it
Click to expand...
Click to collapse
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
ilkercatal said:
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
Click to expand...
Click to collapse
If you navigate to "advanced" and select it will it give you a new set of options?
if it does try the "mount USB" and plug it into a computer and see if you can surf the SD card via a computer.
KenpoAP said:
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
TeeJay3800 said:
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
Click to expand...
Click to collapse
thank you for help but where do you get a new rom and how do you flash it?
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
3.0.0.5 is only compatible with 2.3 ROMS.
use this to flash it
http://wiki.cyanogenmod.com/index.p...pdate_Guide#First_Method_.28via_RomManager.29
and you'll want to use the "from recovery" method.
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
Your ok! Maybe your bu is2.2 Try any of the 2.3 roms out there and post back!
Sent from my HTC Glacier using XDA App
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Mathato said:
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
ilkercatal said:
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Click to expand...
Click to collapse
Once you are done with the PD15IMG you will have to reroot your phone. IT will return it to a 100% stock fashion.
after you re-root the phone please flash the 3.0.0.6 to help save any confusion down the road.
neidlinger said:
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
Click to expand...
Click to collapse
The original 3.0.0.6 was made by option94, and you can flash it from your existing recovery or fastboot, so booting into a ROM is not necessary.
Hi
I know this has been asked before, and I have read for hours.
But, this is like a big problem now.
I have installed HSPL 2.08 and aMAGDLR 1.13.
Something has gone wrong somewhere, and the phone uses one night to boot up any android version. It load over the night .
So, I want to flash in HSPL and MAGDLR again.
I do not have any WPH installed, so I cant get active sync running to flash.
So I need to go into bootloader. THIS I CANT DO!
I have tried like 100 times. Nothing works.
I have tried holding voldown pressing end call or red reset button. Always the white HTC-screen comes on, and enters MAGDLR, and if I still holds voldown, it scrolls down the whole menu.
Actualle I have gotten in booloader one time, but then I was not prepeard for it, and had to turn off again.
I know that my battery is quite poor. Can this have anyting to do with this?
Can I go into bootloader from inside android?
What can I do?
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
To make it clear volume down as to be hold pushed all the time until you get into bootloader.
Hope this helped you.
If it did, give me a thanks
Sent from my HTC HD2 using xda premium
jonas2295 said:
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
abbamust said:
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
Click to expand...
Click to collapse
Than you are doing something wrong.
Or you have a mutant hd2 lol.
Sent from my HTC HD2 using xda premium
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
jonas2295 said:
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
And if this does not work? Onlt thing that happens, is it vibrates, white screen with htc-logo and in to MAGDLR.
I have rootet many HTC phones before, not HD2, but hero and desire, and never had problems like this.
Marvlesz said:
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
Click to expand...
Click to collapse
it works fine in magdlr...
Hmm I am at the end of my knowledge here.
How I described one post above is what I do if I want to get into bootloader and it works on Europe and us version. Sry mate
Sent from my HTC HD2 using xda premium
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Marvlesz said:
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Click to expand...
Click to collapse
SD card flash method I can flash nand android. But this takes one night to boot up.
I want to flash HSPL and MAGLDR.
Why does my MAGDLR show aMAGDLR? This "a", is it suppose to be there?
yes, the "a" is normal .. did you check the battery pins?
Marvlesz said:
yes, the "a" is normal .. did you check the battery pins?
Click to expand...
Click to collapse
yes, checked the pins. they look fine, and the phone always powers up.
i know my battery is very poor, can this have something to do with this?
this us happenin to me all the time ..so if i want to access boot loader i need to wait 2 mn after shuttind down the phone ...if i try befor 2 mn it gos to magldr and no bootloader ...
i read befor that someone had the same issue and he had to wait about 3 or 4 hours instead of 2 mn i wait
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
pianoman102 said:
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
But to perform task29, dont I need to go to bootloader first?
same here
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
klege said:
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
Click to expand...
Click to collapse
Try the old cwm method via android boot via sd option.
SwiftKeyed from my HTC HD2 via XDA PREMIUM APP
abbamust said:
But to perform task29, dont I need to go to bootloader first?
Click to expand...
Click to collapse
Yes you do. To get back you shut the phone off and while turning it back on hold the vol. Button down. Then do a task29. download the tool to your PC from the link below. Boot into the tricolor screen and start working. Install Task29, install magldr, install recovery, install rom from zip from recovery. :-D. forum.xda-developers.com/showthread.php?t=1090783 pm me if you have any questions.
Sent from my HD2 using XDA App
plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...
NO112 said:
plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...
Click to expand...
Click to collapse
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app
did you repartition your internal memory for CM?
It may be possible that your /system is not large enough for your stock ROM.
Flash CM again and see if it works,
(if you are not sure about partition size,in terminal emulator type df -h, and report how much you get for system. for stock you need 200+ MB)
keviv77 said:
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...
NO112 said:
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...
Click to expand...
Click to collapse
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app
keviv77 said:
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
There's a thread on modaco on unbricking blade.find that.
Sent from my Blade using xda app-developers app
NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
Did you try powering on with volume down pressed?
QuantumFoam aka Faiz | Asus TF300T - ZTE Blade | gigatechworld.com
didn't work
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:
NO112 said:
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:
Click to expand...
Click to collapse
Take out battery n put it again. Then try by pressing vol- and power button. If nothing happens then u can download tpt from desktop and copy image file to sdcard. Then flash it by pressing vol+ and menu and power button together
Sent from my Blade using xda app-developers app
i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...
NO112 said:
i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...
Click to expand...
Click to collapse
Google it. U WL find it on modaco
Sent from my Blade using xda app-developers app
Hello!
I flashed my HD2 with Android 4.0 (NexusHD2) and now I can't access recovery or bootloader itself... It just boots directly to android, it says:
1234
GO, GO, GO
And then boot animation is shown.
Any idea how to acces bootloader?
bajdec said:
Hello!
I flashed my HD2 with Android 4.0 (NexusHD2) and now I can't access recovery or bootloader itself... It just boots directly to android, it says:
1234
GO, GO, GO
And then boot animation is shown.
Any idea how to acces bootloader?
Click to expand...
Click to collapse
Do you have any idea how to use xda search button? have you even read the magldr thread to know how to access it or access recovery?
before you answer that, go use the search button, type magldr, go to magldr thread, read it ALL (YES ITS VERY LONG) read ALL INSTRUCTIONS carefully 9 times, and then go to bootloader. you would realise how to do it eventually. hope some mod locks this thread as there's been too many similar
gilbert32 said:
Do you have any idea how to use xda search button? have you even read the magldr thread to know how to access it or access recovery?
before you answer that, go use the search button, type magldr, go to magldr thread, read it ALL (YES ITS VERY LONG) read ALL INSTRUCTIONS carefully 9 times, and then go to bootloader. you would realise how to do it eventually. hope some mod locks this thread as there's been too many similar
Click to expand...
Click to collapse
Pressing POWER button untill bootloader appears should work, but it doesnt... Any idea?
you press it since the moment you turn the hd2 on? when you want to turn it on keep holding the power button. you should be able to access magldr
gilbert32 said:
you press it since the moment you turn the hd2 on? when you want to turn it on keep holding the power button. you should be able to access magldr
Click to expand...
Click to collapse
It still boots directly to android... I have no idea what could be wrong
reflash magldr and rom. i'm talking about magldr 1.13 not any older version
bajdec said:
It still boots directly to android... I have no idea what could be wrong
Click to expand...
Click to collapse
Are you sure your power button works properly? Can you get to the bootloader with vol down + power?
Nigeldg said:
Are you sure your power button works properly? Can you get to the bootloader with vol down + power?
Click to expand...
Click to collapse
Yes, power button work fine. I am having problems getting into magldr bootloader.
But can you get to the actual bootloader (tricolour screen) using volume down and power?
Sent from my Nexus 4 using xda app-developers app
Nigeldg said:
But can you get to the actual bootloader (tricolour screen) using volume down and power?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
nigeldg was here
------------------------------------------------
- Remove your battery and re-insert
- Press and HOLD Power Button when you can see options like: "1. Boot WPH 2. Boot AD SD ..."
I Tried To Flash A GPU Overclocking Kernal Over My CPU Overclocking Kernal But It Had Failed So When I Pressed Reboot System It's Not Turning On Please Help.
Can you get into recovery by holding power+volume up?
KiiDPoLo said:
I Tried To Flash A GPU Overclocking Kernal Over My CPU Overclocking Kernal But It Had Failed So When I Pressed Reboot System It's Not Turning On Please Help.
Click to expand...
Click to collapse
what kernel did u flash?
mic213 said:
what kernel did u flash?
Click to expand...
Click to collapse
I think its safe to say that it wasnt compatible with the XT907
Nope It's Not Turning On At All, Im Gonna Try Leaving It Charging. It Was Some ICS Linpack GPU Kernal.
Here's The Link: http://rootzwiki.com/topic/33830-der-kernel-trinity-gst-vzw-ics/page__st__30
Also Im Have TWRP Recovery V2.3.2.3 and On This Rom: http://forum.xda-developers.com/showthread.php?t=2355916
KiiDPoLo said:
Nope It's Not Turning On At All, Im Gonna Try Leaving It Charging. It Was Some ICS Linpack GPU Kernal.
Here's The Link: http://rootzwiki.com/topic/33830-der-kernel-trinity-gst-vzw-ics/page__st__30
Also Im Have TWRP Recovery V2.3.2.3 and On This Rom: http://forum.xda-developers.com/showthread.php?t=2355916
Click to expand...
Click to collapse
Yeah, bad kernel. That's designed for a SGS3 and CM9 ROMs. With that being said, it won't boot all? The bad kernel shouldn't prevent you from booting into recovery, but like Panther said, your battery may be dead. Leave it on the charger for a while and see what happens. Use Panther's button combo to boot straight into recovery and restore a backup. You can also try holding all three buttons to get into the fastboot menu. Once in the menu, use vol- to go to your choice and vol+ to select your option. Good luck and let us know what happens.
RikRong said:
Yeah, bad kernel. That's designed for a SGS3 and CM9 ROMs. With that being said, it won't boot all? The bad kernel shouldn't prevent you from booting into recovery, but like Panther said, your battery may be dead. Leave it on the charger for a while and see what happens. Use Panther's button combo to boot straight into recovery and restore a backup. You can also try holding all three buttons to get into the fastboot menu. Once in the menu, use vol- to go to your choice and vol+ to select your option. Good luck and let us know what happens.
Click to expand...
Click to collapse
I've Been Charging It For A Few Hours Now. Nothings Happening, Not Even The Charging LED Comes On But Imma Leave It To Charge For A Little Longer; I Switched Outlets.
Still Not Coming On and I Flashed It AT A Full Battery.
RikRong said:
Yeah, bad kernel. That's designed for a SGS3 and CM9 ROMs. With that being said, it won't boot all? The bad kernel shouldn't prevent you from booting into recovery, but like Panther said, your battery may be dead. Leave it on the charger for a while and see what happens. Use Panther's button combo to boot straight into recovery and restore a backup. You can also try holding all three buttons to get into the fastboot menu. Once in the menu, use vol- to go to your choice and vol+ to select your option. Good luck and let us know what happens.
Click to expand...
Click to collapse
Nothing's Happening. No LED, No Signs Off Life, IDK What To Do....!!!!!!!!!!!!!!!!!
KiiDPoLo said:
Nothing's Happening. No LED, No Signs Off Life, IDK What To Do....!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Put it on a charger. Then if you can't get bootloader menu to come on (normal pwr, recovery....).
Then you clobbered the partitions. Got insurance?
aviwdoowks said:
Put it on a charger. Then if you can't get bootloader menu to come on (normal pwr, recovery....).
Then you clobbered the partitions. Got insurance?
Click to expand...
Click to collapse
Okay Thanks, and Nope
KiiDPoLo said:
Okay Thanks, and Nope
Click to expand...
Click to collapse
not sure if you resolved you issue, but try again to get to recovery - press and hold all 3 buttons (power + volume up + volume down), release only the power button after 5 seconds and wait for the recovery screen to appear (if not, try releasing the volume buttons, then press the volume down button once, then the volume up button once).
At About 2:30 AM This Morning The Charging LED Finally Came On But It's Green So I Guess It Has A Full Battery, Not Sure and Whenever I Try To Boot Into Recovery The Light Comes Off.
KiiDPoLo said:
At About 2:30 AM This Morning The Charging LED Finally Came On But It's Green So I Guess It Has A Full Battery, Not Sure and Whenever I Try To Boot Into Recovery The Light Comes Off.
Click to expand...
Click to collapse
that's a good sign that the battery light came on. getting into recovery can be tricky, so keep trying. you might need to get there blindly - basically, assume that you cannot see the screen, and press the right buttons to get into it. this has happened to me before.
jco23 said:
that's a good sign that the battery light came on. getting into recovery can be tricky, so keep trying. you might need to get there blindly - basically, assume that you cannot see the screen, and press the right buttons to get into it. this has happened to me before.
Click to expand...
Click to collapse
Okay So Do My Phone Need Any Source Of Power To Boot And When I Boot Into Recovery Will The Screen Turn On ????
KiiDPoLo said:
Okay So Do My Phone Need Any Source Of Power To Boot And When I Boot Into Recovery Will The Screen Turn On ????
Click to expand...
Click to collapse
I would leave it plugged in. Once you get to the twrp screen, it should appear.
Sent from my XT907 using xda app-developers app
jco23 said:
I would leave it plugged in. Once you get to the twrp screen, it should appear.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Okay Thanks Alot Man For All The Help. Im Going To Try Right Now.
It still Hasnt Come Back On. Can You tell Me Exactly How You Fixed Yours and How Yours Got Bricked ??????:crying::crying::crying::crying::crying:
jco23 said:
I would leave it plugged in. Once you get to the twrp screen, it should appear.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
It still Hasnt Come Back On. Can You tell Me Exactly How You Fixed Yours and How Yours Got Bricked ??????
KiiDPoLo said:
It still Hasnt Come Back On. Can You tell Me Exactly How You Fixed Yours and How Yours Got Bricked ??????
Click to expand...
Click to collapse
21 days later?
Sent from my XT907 using xda app-developers app
jco23 said:
21 days later?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I Slacked Off For Awhile. Here's Exactly What My Phone Is Doing. This Guy Has The Same Problem:http://www.youtube.com/watch?v=kFxL5-kIdSs