Hi
I know this has been asked before, and I have read for hours.
But, this is like a big problem now.
I have installed HSPL 2.08 and aMAGDLR 1.13.
Something has gone wrong somewhere, and the phone uses one night to boot up any android version. It load over the night .
So, I want to flash in HSPL and MAGDLR again.
I do not have any WPH installed, so I cant get active sync running to flash.
So I need to go into bootloader. THIS I CANT DO!
I have tried like 100 times. Nothing works.
I have tried holding voldown pressing end call or red reset button. Always the white HTC-screen comes on, and enters MAGDLR, and if I still holds voldown, it scrolls down the whole menu.
Actualle I have gotten in booloader one time, but then I was not prepeard for it, and had to turn off again.
I know that my battery is quite poor. Can this have anyting to do with this?
Can I go into bootloader from inside android?
What can I do?
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
To make it clear volume down as to be hold pushed all the time until you get into bootloader.
Hope this helped you.
If it did, give me a thanks
Sent from my HTC HD2 using xda premium
jonas2295 said:
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
abbamust said:
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
Click to expand...
Click to collapse
Than you are doing something wrong.
Or you have a mutant hd2 lol.
Sent from my HTC HD2 using xda premium
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
jonas2295 said:
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
And if this does not work? Onlt thing that happens, is it vibrates, white screen with htc-logo and in to MAGDLR.
I have rootet many HTC phones before, not HD2, but hero and desire, and never had problems like this.
Marvlesz said:
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
Click to expand...
Click to collapse
it works fine in magdlr...
Hmm I am at the end of my knowledge here.
How I described one post above is what I do if I want to get into bootloader and it works on Europe and us version. Sry mate
Sent from my HTC HD2 using xda premium
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Marvlesz said:
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Click to expand...
Click to collapse
SD card flash method I can flash nand android. But this takes one night to boot up.
I want to flash HSPL and MAGLDR.
Why does my MAGDLR show aMAGDLR? This "a", is it suppose to be there?
yes, the "a" is normal .. did you check the battery pins?
Marvlesz said:
yes, the "a" is normal .. did you check the battery pins?
Click to expand...
Click to collapse
yes, checked the pins. they look fine, and the phone always powers up.
i know my battery is very poor, can this have something to do with this?
this us happenin to me all the time ..so if i want to access boot loader i need to wait 2 mn after shuttind down the phone ...if i try befor 2 mn it gos to magldr and no bootloader ...
i read befor that someone had the same issue and he had to wait about 3 or 4 hours instead of 2 mn i wait
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
pianoman102 said:
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
But to perform task29, dont I need to go to bootloader first?
same here
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
klege said:
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
Click to expand...
Click to collapse
Try the old cwm method via android boot via sd option.
SwiftKeyed from my HTC HD2 via XDA PREMIUM APP
abbamust said:
But to perform task29, dont I need to go to bootloader first?
Click to expand...
Click to collapse
Yes you do. To get back you shut the phone off and while turning it back on hold the vol. Button down. Then do a task29. download the tool to your PC from the link below. Boot into the tricolor screen and start working. Install Task29, install magldr, install recovery, install rom from zip from recovery. :-D. forum.xda-developers.com/showthread.php?t=1090783 pm me if you have any questions.
Sent from my HD2 using XDA App
Related
I have ran AlphaRevX succesfully. I have pushed the CWR mod to the phone using instructions provided.
When I click recovery it loads cwr but whenever I click on any of the options the menu disappears and the logo just sits there. I can click the power switch quite fast and the menu just keeps reappearing and disappearing.
I am trying to get the su zip installed but I have obviously messed up something about the cwr mod tool.
Anyone have any suggestions?
EDIT:
I am officially a moron.
I got it into my head that you need to press power off to select the right option.
I started fiddling with the touch buttons and noticed they worked too. Then I clicked the track button and it selected the option. Ha.
Monumental error on my part. Must have pushed that cwr mod 4 times. Wasted an hour.
Happened to me to
stuffynet said:
Happened to me to
Click to expand...
Click to collapse
use trackball to select in recovery if freezes during flashing or scroling(happend to me) flash clockwork recovery 3.1.0.2 and you should be fine
stuffynet said:
Happened to me to
Click to expand...
Click to collapse
happened to me too, got very worried, a few mins and back on clockwork home screen.
Patience is a Virtue
I lost some hours trying to install different CWM versions untill discover that it is supposed to use trackball...
Happened to me as well but my excuse is I have desire hd which u do use the power button to select
After rooting and s-off my Mrs wildfire I spent 15 minutes pressing the power button before I lost my temper and swore a bit I read few posts and thought "what a tit I am"
Sent from my Desire HD using XDA Premium App
happened to me 2
Supercluster said:
I am officially a moron.
I got it into my head that you need to press power off to select the right option.
Click to expand...
Click to collapse
Everyone for the 1st time thinks the same way because we got the habit of pressing the power key for selection in hboot menu.
Quite natural thing unless we think that phone is bricked. (lol)
Sent from my HTC Wildfire using XDA App
me 2
after waiting for long time , I decided to push power button, then back to CWM home screen.
btw, now CWM version is 2.5 , by rom manager in CM7.
i heard about offline charging? but what 's that ?
and what is a recommend CWM version to use ?
i have flashed everything right hspl3 radio 2.15.50.14 magldr1.1.3
then cwm recovery and cm7
at first the device works fine then it freezed i didn't know what to
do then i fliped the battery out and then put in back in then i feel the first 1
vibrate then it doesn't do any thing i tried going to bootloader but can't
Holding the up volume didn't get you into boot loader?
maybe the battery is dead?
Sent from my HTC HD2 using XDA App
i tried didin't help
What Rom have you installed?
Can you boot into magldr? Turn it on and keep hold of the power button, scroll to recovery, once in cwm click wipe data/factory reset then boot
Sent from my HTC HD2 using XDA App
khaled1994 said:
i tried didin't help
Click to expand...
Click to collapse
Hi
Try going to CWM 8. ad recovery and wipe data,cache partition,and dalvik(advanced).
malybru said:
Hi
Try going to CWM 8. ad recovery and wipe data,cache partition,and dalvik(advanced).
Click to expand...
Click to collapse
it doesn't even turn on so i can't boot into magldr
hspl3???
no man, you was needing 2.08 hspl....
pirlano said:
hspl3???
no man, you was needing 2.08 hspl....
Click to expand...
Click to collapse
Hspl3 is 2.08
Sent from my HTC HD2 using XDA Premium App
please someone help
By holding vol down and power you can't get into bootloader?
Sent from my HTC HD2 using XDA Premium App
whynot66 said:
By holding vol down and power you can't get into bootloader?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
no i can't
FriedSushi87 said:
Holding the up volume didn't get you into boot loader?
maybe the battery is dead?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Press Vol down + Power to enter bootloader
No press vol up + Power
Can fix if your phone can power on or enter bootloader, but hard brick if your phone do not power on!
Please charge your battery before do this. My HD2 also got error when the battery finish during flash nearly 100%. it got to soft brick. But now is ok after do mtty 1.42. please search the forum for this guide.
If your phone is not detect your battery to the AC, Please find another way to charge your battery. To make sure your batter is full or at least 50%.
Thanks
Hmm, maybe try reading this: http://forum.xda-developers.com/showthread.php?t=668347 'this method only works if you succesfully flashed HSPL before'
dawid. said:
Hmm, maybe try reading this: http://forum.xda-developers.com/showthread.php?t=668347 'this method only works if you succesfully flashed HSPL before'
Click to expand...
Click to collapse
i cant power on the device so i cant go
to bootloader
khaled1994 said:
i cant power on the device so i cant go
to bootloader
Click to expand...
Click to collapse
D'oh! Sorry my bad. I guess that there is nothing you can do :/
Send it back if it's on warranty just say it stopped working
If it's not on warranty then here is cheap (I think it cheap lol, haven't looked for anything cheaper maybe ebay has cheaper services) HD2 unbricking: http://www.mobiletechvideos.com/blog/?page_id=785 $50 + free RETURN shipping.
EDIT: haven't found anything cheaper on ebay :http://cgi.ebay.com/HTC-HD2-JTAG-Un...ultDomain_0&hash=item2565494109#ht_652wt_1059 but it's for $60.00
Free shipping
Your device stopped working after you have removed the battery.
Probably a bent pin or something .
Marvlesz said:
Your device stopped working after you have removed the battery.
Probably a bent pin or something .
Click to expand...
Click to collapse
can u tell me how can i fix that
Remove the battery, put it back in and hold the volume up+down rockers at the same time, then it should restore, if not you're holding a paperweight
Being Cool from my HTC G2 running CM7
can someone please help me revive my phone
turphed said:
Remove the battery, put it back in and hold the volume up+down rockers at the same time, then it should restore, if not you're holding a paperweight
Being Cool from my HTC G2 running CM7
Click to expand...
Click to collapse
i can't turn on the phone
Hi all,
I'm new to the Defy forum as I bought a Defy+ two weeks ago, working great till now. I have a question.
I used to own a Samsung Galaxy 3 in which there was an option to reboot the phone if it gets hung. We had to press the power button for 10 seconds and the phone reboots (hard reboot as we used to call it in G3 forum). Tried the same thing with Defy+, but this option doesn't seem to work.
So, how do we hard reboot the phone if it's hung? Any other way than removing the battery and reinserting it?
Try pushing all three buttons (Vol+, Vol- & Power) at the same time.
daniel_loft said:
Try pushing all three buttons (Vol+, Vol- & Power) at the same time.
Click to expand...
Click to collapse
That didn't work...
Haha same thing happens to me all the time ones its hung you open the back cover take battery out and put back in. You DONT lose any data.
Sent from my MB525 using xda premium
daniel_loft said:
Try pushing all three buttons (Vol+, Vol- & Power) at the same time.
Click to expand...
Click to collapse
Wont work theirs non for reset like is questioned
Sent from my MB525 using xda premium
unfortunaly no there isn't any way to do that "native".
I do have that option now, after installing a Miuis room (pikachu), but, im unsure if that happened cause of the rom or just happened when i installed 2ndinit ...
Sorry. really new. :S.
If youre interested in starting to "go deep" in the phone, then, root it, install the 2ndinit for the defy (wich you will have to do if you ever want to get a custom rom), and try
hope that helps (?) :S
Hello!
I flashed my HD2 with Android 4.0 (NexusHD2) and now I can't access recovery or bootloader itself... It just boots directly to android, it says:
1234
GO, GO, GO
And then boot animation is shown.
Any idea how to acces bootloader?
bajdec said:
Hello!
I flashed my HD2 with Android 4.0 (NexusHD2) and now I can't access recovery or bootloader itself... It just boots directly to android, it says:
1234
GO, GO, GO
And then boot animation is shown.
Any idea how to acces bootloader?
Click to expand...
Click to collapse
Do you have any idea how to use xda search button? have you even read the magldr thread to know how to access it or access recovery?
before you answer that, go use the search button, type magldr, go to magldr thread, read it ALL (YES ITS VERY LONG) read ALL INSTRUCTIONS carefully 9 times, and then go to bootloader. you would realise how to do it eventually. hope some mod locks this thread as there's been too many similar
gilbert32 said:
Do you have any idea how to use xda search button? have you even read the magldr thread to know how to access it or access recovery?
before you answer that, go use the search button, type magldr, go to magldr thread, read it ALL (YES ITS VERY LONG) read ALL INSTRUCTIONS carefully 9 times, and then go to bootloader. you would realise how to do it eventually. hope some mod locks this thread as there's been too many similar
Click to expand...
Click to collapse
Pressing POWER button untill bootloader appears should work, but it doesnt... Any idea?
you press it since the moment you turn the hd2 on? when you want to turn it on keep holding the power button. you should be able to access magldr
gilbert32 said:
you press it since the moment you turn the hd2 on? when you want to turn it on keep holding the power button. you should be able to access magldr
Click to expand...
Click to collapse
It still boots directly to android... I have no idea what could be wrong
reflash magldr and rom. i'm talking about magldr 1.13 not any older version
bajdec said:
It still boots directly to android... I have no idea what could be wrong
Click to expand...
Click to collapse
Are you sure your power button works properly? Can you get to the bootloader with vol down + power?
Nigeldg said:
Are you sure your power button works properly? Can you get to the bootloader with vol down + power?
Click to expand...
Click to collapse
Yes, power button work fine. I am having problems getting into magldr bootloader.
But can you get to the actual bootloader (tricolour screen) using volume down and power?
Sent from my Nexus 4 using xda app-developers app
Nigeldg said:
But can you get to the actual bootloader (tricolour screen) using volume down and power?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
nigeldg was here
------------------------------------------------
- Remove your battery and re-insert
- Press and HOLD Power Button when you can see options like: "1. Boot WPH 2. Boot AD SD ..."
I have a busted power button (end call button) and was wondering if I could boot into MAGLDR without it directly booting straight to android. I know that I'm supposed to press the power button at the MAGLDR boot sequence to reach the menu that lets me use CM recovery but I'm not able to do that. Is there any way in which I can install a new ROM on my phone without actually using MAGLDR and CM recovery? Or any other way to make me reach the MAGLDR menu screen?
gamerprithvi said:
I have a busted power button (end call button) and was wondering if I could boot into MAGLDR without it directly booting straight to android. I know that I'm supposed to press the power button at the MAGLDR boot sequence to reach the menu that lets me use CM recovery but I'm not able to do that. Is there any way in which I can install a new ROM on my phone without actually using MAGLDR and CM recovery? Or any other way to make me reach the MAGLDR menu screen?
Click to expand...
Click to collapse
You could try getting into the bootloader then flashing everything from scratch. To get into the bootloader without the power button I think you can take off the back cover and press the small reset button near the SD slot (using a pin or toothpick) while holding volume down. From there, if that actually works, you can flash a Task 29 followed by MAGLDR, CWM and a new ROM.
Or alternatively, there is an old legend that says "reboot into recovery" & "reboot into bootloader" from within Android let you reboot into MAGLDR, do you believe in legends?
(According to the scrolls, this legend may only be true if you have Android already installed obviously)
EDIT:
Actually, you can do that without having android working (e.g. you're stuck at the ROM splash screen or in a bootloop). Just use adb to reboot into recovery/bootloader and you should be in MAGLDR.
Apparently the scrolls were wrong.
You do realize that I mentioned that my power button was busted so it wasn't possible for me to boot into recovery through the power-restart prompt menu from within the ROM after booting. Or is there any other way to get that prompt from within the ROM? Infact from what I know, telling it to boot into recovery never did work on my HD2....I had to press the end call every time I wanted it to get to the MAGLDR menu.
Sent from my NexusHD2 using xda app-developers app
And I did use adb before posting this here but it boots straight to Android. That doesn't work.
Sent from my NexusHD2 using xda app-developers app
Marvlesz said:
Or alternatively, there is an old legend that says "reboot into recovery" & "reboot into bootloader" from within Android let you reboot into MAGLDR, do you believe in legends?
(According to the scrolls, this legend may only be true if you have Android already installed obviously)
EDIT:
Actually, you can do that without having android working (e.g. you're stuck at the ROM splash screen or in a bootloop). Just use adb to reboot into recovery/bootloader and you should be in MAGLDR.
Apparently the scrolls were wrong.
Click to expand...
Click to collapse
I got it working. Thanks for your help.:good:
gamerprithvi said:
You do realize that I mentioned that my power button was busted so it wasn't possible for me to boot into recovery through the power-restart prompt menu from within the ROM after booting. Or is there any other way to get that prompt from within the ROM? Infact from what I know, telling it to boot into recovery never did work on my HD2....I had to press the end call every time I wanted it to get to the MAGLDR menu.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
gamerprithvi said:
I got it working. Thanks for your help.:good:
Click to expand...
Click to collapse
You know what really grinds my gears? When people say "it's not working" to what you give them before they even try it out . (j/k)
Glad you got it working.
Marvlesz said:
You know what really grinds my gears? When people say "it's not working" to what you give them before they even try it out
Glad you got it working.
Click to expand...
Click to collapse
FTFY
OP, reboot into recovery/bootloader never worked in MAGLDR. Those options only work in cLK. +1 to 'glad you got it working'.