[Q] Clockwork Recovery Mod Stuck on Hat logo - Wildfire General

I have ran AlphaRevX succesfully. I have pushed the CWR mod to the phone using instructions provided.
When I click recovery it loads cwr but whenever I click on any of the options the menu disappears and the logo just sits there. I can click the power switch quite fast and the menu just keeps reappearing and disappearing.
I am trying to get the su zip installed but I have obviously messed up something about the cwr mod tool.
Anyone have any suggestions?
EDIT:
I am officially a moron.
I got it into my head that you need to press power off to select the right option.
I started fiddling with the touch buttons and noticed they worked too. Then I clicked the track button and it selected the option. Ha.
Monumental error on my part. Must have pushed that cwr mod 4 times. Wasted an hour.

Happened to me to

stuffynet said:
Happened to me to
Click to expand...
Click to collapse
use trackball to select in recovery if freezes during flashing or scroling(happend to me) flash clockwork recovery 3.1.0.2 and you should be fine

stuffynet said:
Happened to me to
Click to expand...
Click to collapse
happened to me too, got very worried, a few mins and back on clockwork home screen.
Patience is a Virtue

I lost some hours trying to install different CWM versions untill discover that it is supposed to use trackball...

Happened to me as well but my excuse is I have desire hd which u do use the power button to select
After rooting and s-off my Mrs wildfire I spent 15 minutes pressing the power button before I lost my temper and swore a bit I read few posts and thought "what a tit I am"
Sent from my Desire HD using XDA Premium App

happened to me 2

Supercluster said:
I am officially a moron.
I got it into my head that you need to press power off to select the right option.
Click to expand...
Click to collapse
Everyone for the 1st time thinks the same way because we got the habit of pressing the power key for selection in hboot menu.
Quite natural thing unless we think that phone is bricked. (lol)
Sent from my HTC Wildfire using XDA App

me 2
after waiting for long time , I decided to push power button, then back to CWM home screen.
btw, now CWM version is 2.5 , by rom manager in CM7.
i heard about offline charging? but what 's that ?
and what is a recommend CWM version to use ?

Related

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU
HELLO ALL,
I USED THIS LINK http://forum.xda-developers.com/showthread.php?t=858996
TO ROOT MY MY TOUCH 4G PHONE AND IT WORKED FINE UNTIL I ATTEMPT TO INSTALL OVERCLOCKING SOFTWARE FROM>>>
http://theunlockr.com/2010/12/14/ho...ted-s-off-t-mobile-mytouch-4g-or-t-mobile-g2/
AND AFTER DOING WHAT THEU SAID MY PHONE JUST ACTED CRAZY/
EVERYTIME I TRIED TO TURN THE PHONE ON IT VIBRATES CONTINUESLY AND NEVER GETS TO THE OS. SO I LEFT IT ON FOR NIGHT LIKE THAT AND I WOKE UP IN THE MORNING OBVIOUSLY BETTERY WAS COMPLETLY DRAINED ( AFTER ALL THE VIBRATING BACK AND FORTH)
ANYWAYS, NOW IT JUST TURNS ON AND STAYS AT " MY TOUCH 4G SCREEN WHERE ITS WHITE AND THAT WRITING" IT JUST FREEZES.
IF I TRY TO HOLD VOL DOWN AND CLICK POWER BUTTON, I GET TO THE PAGE WHERE ITS WHITE AND FASTBOOT, RECOVERY, FACTORY RESET,SIMLUCK,IMAGE CRC MENU.
I HAVE TRIED EVERYTHING IN THAT MENU INLUDING FACTORY RESET, NOTTING WORKS.
WHEN I ALSO TRY RECOVERY FROM THERE I CAN GET TO "ClockMod Recovery" BUT I CANT EVEN ACCES INSTALL ZIP FROM SDCARD, WHEN I TRY THAT ALL I SEE IS A BLACK SCREEN AND A HAT AND A BIG EYE UNDER IT.
THIS IS SO FRUSTRATING,
Step one, slow down
step two, turn off the caps.
Step three it's obvious that you have s=off if you have clockwork ROM on your phone.
At the top of your phone What recovery image do you have? 3.0.0.5? or a 2.x one?
thank you for responding, I have v3.0.0.5 version
i have v3.0.0.5 version
ilkercatal said:
i have v3.0.0.5 version
Click to expand...
Click to collapse
as long as you do not have any errors on your recovery image about not being able to mount anything....to get your phone working you can do one of two things.
1)You can flash any Gingerbread based ROM either from Cyanogen(mod) or from TeamRoyal. Those all can be found in our Development section from your recovery image.
2) you can flash the PD15IMG and restore you phone back to 100% via the HBoot (engineering) screen, that can be found in our development section as well.
no luck
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
You can also check the semi brick thread in here. There is a link to a nice guide to revert back to stock. Exact same issue!
Sent from my HTC Glacier using XDA App
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
when you select something you need to select it with the track pad. If you use the power button you'll get the text will disappear.
the only way you can use ADB to flash stuff is if you have the engineering bootloader. If you just followed TheUnlockr's method then you do not have it.
i use volume buttons and power button to select it
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
ilkercatal said:
i use volume buttons and power button to select it
Click to expand...
Click to collapse
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
ilkercatal said:
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
Click to expand...
Click to collapse
If you navigate to "advanced" and select it will it give you a new set of options?
if it does try the "mount USB" and plug it into a computer and see if you can surf the SD card via a computer.
KenpoAP said:
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
TeeJay3800 said:
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
Click to expand...
Click to collapse
thank you for help but where do you get a new rom and how do you flash it?
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
3.0.0.5 is only compatible with 2.3 ROMS.
use this to flash it
http://wiki.cyanogenmod.com/index.p...pdate_Guide#First_Method_.28via_RomManager.29
and you'll want to use the "from recovery" method.
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
Your ok! Maybe your bu is2.2 Try any of the 2.3 roms out there and post back!
Sent from my HTC Glacier using XDA App
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Mathato said:
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
ilkercatal said:
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Click to expand...
Click to collapse
Once you are done with the PD15IMG you will have to reroot your phone. IT will return it to a 100% stock fashion.
after you re-root the phone please flash the 3.0.0.6 to help save any confusion down the road.
neidlinger said:
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
Click to expand...
Click to collapse
The original 3.0.0.6 was made by option94, and you can flash it from your existing recovery or fastboot, so booting into a ROM is not necessary.

Fixed [Q] bootrom corrupt don't reboot seek xda rom backup fail

Bought on crapbay last week said unlocked but I don't know how.
So I prepared, with syncing to google
then in this order maybe silly:-
visionary temproot -ok
permroot -ok
titanium backup removed all crappy vodafone 360 lock-in apps
titanium backup done ok
busybox installed
rommanager - flashed clockworkmod recovery said succesful
PROBLEM
tried clockworkmod backup current rom -blackscreen attention yellow triangle !
stuck there... hold vol+ and power
bootmanager gave choice as elsewhere described -reboots 1st time bit funny no desktop/wallpaper black, rebooted fine...
tried nandroid backup no success either
hold home and press power button? home isn't a real button on htcHD difernt buttons maybe..
(don't dare try now) There is no directory on the device called by the date...
tried "Desire HD easy s-off" from windows7,phone-batteryonly yes?!
claimed I didn't have root! Thought maybe thats how it had been previously been unlocked.
so I checked the s-off already and ran again..
"Bootrom corrupt, don't reboot, seek help at xda"
Device works until reboot or power down I suppose.
rommanager claims sd card not mounted so can't try/do backup from there. but rommanager is lying cos I can play games on the sdcard?
plus if rommanager does same as last time I'll have to rebbot and can't now.
Help and advice very welcome
edit must leave 10 characters
Ah yes well not sure it's ok, but..
I tried soff again and this time noticed the phone asking for su permission... once clicked seems ok. didn't see it last time probably cause of problem?
all done your device is now eng s-off
does this mean I can reboot? am I ok?
No
rommanager crashed as soon as I tried it. Now
LOOP
process android.process.acore has stopped unexpectedly. please try again LOOP
what do?
quatzar said:
Ah yes well not sure it's ok, but..
I tried soff again and this time noticed the phone asking for su permission... once clicked seems ok. didn't see it last time probably cause of problem?
all done your device is now eng s-off
does this mean I can reboot? am I ok?
Click to expand...
Click to collapse
It is OK now. You just did not tap the "allow" last time. Just reboot to get rid of FC loop
You were right rebooted ok. thanks
But I'm still stuck with the red triangle! when backing up rom?
and reboot into clockwork recovery mode also red triangle !
how can I backup ROM?
hold home and power doesn't work from off at all.
tried hold vol+ an power no joy
how to back up ROM?
My biggest question is will I be able to turn off vibrate everywhere in cyanogen including market and sms etc where it won't turn off at all. Vibrate sucks battery like an electric whore!
Did you pressed the "install clockworkmod recovery" button in fastboot?
And yes, you can turn off vibrations
Tapatalked with Tapatalk from my Desire HD using Tapatalk.
Flussen said:
Did you pressed the "install clockworkmod recovery" button in fastboot?
Click to expand...
Click to collapse
now you mention it fastboot flashes up and down so quick I can't see it.
and I now know recovery mode is power and volume down, but that doesn't work either...
Fixed
So rom manager needed me to go stand outside to do a backup. needs a signal to do internal stuff. Go figure.
thanks all

Cant go into bootloader

Hi
I know this has been asked before, and I have read for hours.
But, this is like a big problem now.
I have installed HSPL 2.08 and aMAGDLR 1.13.
Something has gone wrong somewhere, and the phone uses one night to boot up any android version. It load over the night .
So, I want to flash in HSPL and MAGDLR again.
I do not have any WPH installed, so I cant get active sync running to flash.
So I need to go into bootloader. THIS I CANT DO!
I have tried like 100 times. Nothing works.
I have tried holding voldown pressing end call or red reset button. Always the white HTC-screen comes on, and enters MAGDLR, and if I still holds voldown, it scrolls down the whole menu.
Actualle I have gotten in booloader one time, but then I was not prepeard for it, and had to turn off again.
I know that my battery is quite poor. Can this have anyting to do with this?
Can I go into bootloader from inside android?
What can I do?
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
To make it clear volume down as to be hold pushed all the time until you get into bootloader.
Hope this helped you.
If it did, give me a thanks
Sent from my HTC HD2 using xda premium
jonas2295 said:
Remove battery,
Push and hold volume down,
Put battery back,
Press power and hold volume down.
And you are in bootloader
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
abbamust said:
Hi
I'm sorry if I did not explain good enough, but this method I have done many times.
Click to expand...
Click to collapse
Than you are doing something wrong.
Or you have a mutant hd2 lol.
Sent from my HTC HD2 using xda premium
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
jonas2295 said:
Okay try this :
Remove battery,
With left hand press and hold volume down,
With the other hand you put the battery back in and press AND hold the power button, so power and volume pressed and hold, wait until you see the bootloader.
This will work (at least it worked on my phone 1min ago)
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
And if this does not work? Onlt thing that happens, is it vibrates, white screen with htc-logo and in to MAGDLR.
I have rootet many HTC phones before, not HD2, but hero and desire, and never had problems like this.
Marvlesz said:
Also, when you're on MAGLDR .. Can you navigate through the options up and down? If not, then unfortunately you have broken volume rockers .
Click to expand...
Click to collapse
it works fine in magdlr...
Hmm I am at the end of my knowledge here.
How I described one post above is what I do if I want to get into bootloader and it works on Europe and us version. Sry mate
Sent from my HTC HD2 using xda premium
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Marvlesz said:
Some times, Bent Battery Pins can cause unpredictable issues (However, I have not seen one like this.).
You may want to check your battery pins, straighten them delicately if they are (even a little) bent.
You could try sd card flash method?
Click to expand...
Click to collapse
SD card flash method I can flash nand android. But this takes one night to boot up.
I want to flash HSPL and MAGLDR.
Why does my MAGDLR show aMAGDLR? This "a", is it suppose to be there?
yes, the "a" is normal .. did you check the battery pins?
Marvlesz said:
yes, the "a" is normal .. did you check the battery pins?
Click to expand...
Click to collapse
yes, checked the pins. they look fine, and the phone always powers up.
i know my battery is very poor, can this have something to do with this?
this us happenin to me all the time ..so if i want to access boot loader i need to wait 2 mn after shuttind down the phone ...if i try befor 2 mn it gos to magldr and no bootloader ...
i read befor that someone had the same issue and he had to wait about 3 or 4 hours instead of 2 mn i wait
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
pianoman102 said:
Its possible that a task 29 and reflash would work. My home and back button stopped working and it worked itself out.
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
But to perform task29, dont I need to go to bootloader first?
same here
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
klege said:
have the same problem. I can get into MAGDLR and I can move up and down the menu. I can install via DFT but I can't get into bootloader and I can't get into CWM. it is rather strange and I have not found a solution yet.
If I try option 8 (AD Recovery) I get - No Boot Sources
Click to expand...
Click to collapse
Try the old cwm method via android boot via sd option.
SwiftKeyed from my HTC HD2 via XDA PREMIUM APP
abbamust said:
But to perform task29, dont I need to go to bootloader first?
Click to expand...
Click to collapse
Yes you do. To get back you shut the phone off and while turning it back on hold the vol. Button down. Then do a task29. download the tool to your PC from the link below. Boot into the tricolor screen and start working. Install Task29, install magldr, install recovery, install rom from zip from recovery. :-D. forum.xda-developers.com/showthread.php?t=1090783 pm me if you have any questions.
Sent from my HD2 using XDA App

[Q] Cant Get into AP Fast Boot!

I accidentally,... . unknowingly wiped the RED "system" button in Safestrap 3.12 on my Droid RAZR M today. (I was suppose to be wiping the cash and dalvik, but missed) I'm a retard I know. :crying:
Now I cant get into AP Fastboot to restore the phone from this hard brick!
When I press the power button along with the volume buttons, the only thing that happens is the red Motorola 'M" appears for a few seconds then the safe strap screen appears with the little sad robot, but that's it no AP Fastboot. Pressing the on screen buttons to enter Safestrap Recover do not respond. Oh boy I'm afraid I really did it this time. Its on the charger but i don't know if its even charging with out as OS?
Battery power was at 60% before i bricked it (i think). RSD Lite or my PC for that matter don't even see the phone when its plugged in.
Can this be saved? Or do I need to take a trip down to the Verizon Wireless store?
Droid RAZR M
4.1.2 OTA
Rooted
Locked Bootloader
Safestrap 3.12
Partitioned 64GB SD card utilizing Linked2SD
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Really? Well I hope your right. It gives me some hope. lol So do you have any idea of what alternative key combo i might have to use? Thank you for the reply.
Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Thank you! You were right! was able to get into AP Fastboot with a different button combo like u said. :victory:
shane1 said:
Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2
Click to expand...
Click to collapse
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect
bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
It worked! I utilized the NEWER version of Mat's utility and it did it!!! Woo Hoo!! Thank you so very much. Thank you all for all the speedy help.
SARM1084 said:
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect
Click to expand...
Click to collapse
hey no prob! i try to help as much as i can !
bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Halp
This thread saved my life, then killed me. The suggestion about the different keys was spot on, i got into fast boot mode, then ran that utility. It totally failed me, I must have killed my phone pretty dead, and now there are no more key combos (the suggested one worked at first but now its just making the screen go blank) to try to get back into fast boot to try again. any more suggestions? on the up side verizon just pushed that update so i figure i can blame that to attempt an exchange
Did you take the update before using that utility? If you did, which version did you use? If you were already updated, then you needed to run 1.20. If you ran the wrong utility, that will cause issues. Now, since you can't boot, it sounds like your battery is dead. When you get to the blank screen, plug it in and leave it to charge for a while.
I'm no expert by any means but I'll try to help as best i can. If not me I'm confident someone else will. Now, I apologize because I didn't understand your original post.
Could you elaborate a little more please?
1. What were you trying to do with your phone prior to things going wrong, if they went wrong at all.
2. you mentioned AP Fastboot. So IM going to assume that at least you can access it. (not the same problem that I was having) that's a good thing! lol
3. Are you utilizing a utility like the one by Matt? Or are you doing something else? Like flashing firmware etc.
4. What were you in Fastboot for? What were your intentions?
I hope this doesn't come over a condescending. Just trying to get a Clearer understand of your issue so we can help.
Sent from my XT907 using xda app-developers app
Sorry double post
PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Look at my previous post
Sent from my XT907 using xda app-developers app
Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app
PartyOnINSANE said:
Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
No problems brother. Glad to see your up and running.
Sent from my XT907 using xda app-developers app
Stuck in a Boot Loop
PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.
gjhkl said:
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.
Click to expand...
Click to collapse
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.
RikRong said:
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.
Click to expand...
Click to collapse
I have done your steps and I get the menu up, but when I try to scroll down with the volume down button, it doesn't move. It just stays on "normal powerup". How can I fix this?

Stock Recovery Menu vs Dead Android

I am trying to install the leaked soak test of 4.4 and I cannot for the life of me get a stock recovery menu to come up. I've held Power, vol up and vol down and gotten the menu where you can select recovery or AP Fastboot, etc. But when I select recovery all I can ever get is the dead Android. I've tried pumping the power button, the volume up , seperately, together, etc. No dice. Does anyone know any tricks to this? Would it be possible to just install the file with RSDLite? It's making me CRAZY!! Thanks!:cyclops:
Holding volume up and down for around 5-10 seconds using does it for me. You might nerd to pump it, but those two buttons together do it.
Sent from my One using XDA Premium 4 mobile app
Leraeniesh said:
Holding volume up and down for around 5-10 seconds using does it for me. You might nerd to pump it, but those two buttons together do it.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've managed to get into it once, and tried flashing the soak test file. It rebooted and then hung, so I had to go back into the recovery menu which was actually the new 4.4.2 recovery. However, Every time I tried to get it to flash the update from the sdcard again, it said it was complete. When I tried rebooting the system, it just hangs on the "Unlocked Bootloader" screen. SO I started over and I can't even get back to that point. SO FRUSTRATING !! I WILL beat this darn thing into submission... GRRR
netizenmt said:
I've managed to get into it once, and tried flashing the soak test file. It rebooted and then hung, so I had to go back into the recovery menu which was actually the new 4.4.2 recovery. However, Every time I tried to get it to flash the update from the sdcard again, it said it was complete. When I tried rebooting the system, it just hangs on the "Unlocked Bootloader" screen. SO I started over and I can't even get back to that point. SO FRUSTRATING !! I WILL beat this darn thing into submission... GRRR
Click to expand...
Click to collapse
From what I can interpret through all the various threads out there, you kind of need to let it install twice. The first install will flash the new KK recovery. Then, you boot into the updated recovery and flash the updated system files. Oh, if you're at the screen with the dead droid, you should be able to hold volume down and tap volume up to get into recovery. Well, that's worked previously, anyway.
Ironically, once I gave up and went back to stock, I received the OTA.
Sent from my XT907 using Tapatalk
netizenmt said:
Ironically, once I gave up and went back to stock, I received the OTA.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
If you hold volume down for around 5 seconds and then while releasing it hit volume up, the menu shows up.
I don't know why they made it so difficult.

Categories

Resources